Other families
Quick links to search tags:
Avaota A1, Ayn Odin 2, Banana Pi F3, Helios 4, Odroid XU4, Raspberry Pi 4, Raspberry Pi 5, TI SK-AM62B, TI SK-AM64B, TI SK-AM68, TI SK-TDA4VM, Thinkpad X13s, UEFI x86, UEFI arm64, Xiaomi Elish, Xiaomi Umi
-
Many of us are using Armbian not just on ARM single board computers but also on servers (bare metal & virtual). We use our builds since we trust it more then Debian, Ubuntu, not to mention other distributions that are recklessly updating and one ends up as an OS tester and not OS user. Personally I use Armbian Jammy on Ryzen 9 workstation with great success. My primary use case is development / productivity. For the road I used to have 13" Dell notebook which recently suddenly died. It was out of warranty so I had to get something new. After some testings of various devices I settled with 12th Gen Intel i5-1240P powered Lenovo. Then I tried many general purpose distro…
-
Reputation Points
- 46 replies
- 52.8k views
- 2 followers
-
-
Hi I have upgraded an existing x86 Armbian system with kernel 6.6.63 and zfs 2.3.2 to the suggested kernel 6.12.32-current-x86, but I cannot get the zfs kernel module loaded after the latest updates to Armbian 25.5.1 noble. I also tried on other kernels, only the old 6.6.63 seems to work. Normally when you select a different kernel in the armbian-config menu, it should automatically compile the zfs modules if it is activated. It just skips it. But you can of course compile it with the provided DKMS system: the build just finishes fine, without any error, also the install, but when you try to load the module: it responds with: …
-
Hello everyone, odroid xu4 user here with buster minimal 5.4 from https://dl.armbian.com/odroidxu4/Buster_current_minimal please have a look at the following output ... May 19 12:58:11 localhost kernel: [ 1581.893003] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 100000Hz, actual 100000HZ div = 250) May 19 12:58:12 localhost kernel: [ 1582.352546] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) May 19 12:58:12 localhost kernel: [ 1582.389396] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 300000Hz, actual 297619HZ div = 84) May 19 12:58:12 localhost kernel: [ 1582.426230] mmc_hos…
-
Reputation Points
- 3 replies
- 6.3k views
- 1 follower
-
-
I've been having issues with my Helios4 becoming unresponsive when it's been up for a while. I decided to do some more thorough investigating and found that it was having problems writing to the sdcard. That led to the following entries in syslog: Dec 20 21:36:43 helios-backup kernel: [318645.034243] mmc0: Timeout waiting for hardware interrupt. Dec 20 21:36:43 helios-backup kernel: [318645.034254] mmc0: sdhci: ============ SDHCI REGISTER DUMP =========== Dec 20 21:36:43 helios-backup kernel: [318645.034258] mmc0: sdhci: Sys addr: 0x00000008 | Version: 0x00000202 Dec 20 21:36:43 helios-backup kernel: [318645.034263] mmc0: sdhci: Blk size: 0x000072…
-
Reputation Points
- 2 replies
- 4.2k views
-
-
Installed minimal debian image on my rPI5B. Then used "armbian-config --cmd PVE001" to install Proxmox. That went well with no reported errors. Navigated to the Proxmox web GUI and it looked and acted as expected. I currently have an AMD64 Proxmox cluster operating on my homelab so I am familiar with Proxmox. I wanted to make some changes to my network configuration using the Proxmox GUI. When I clicked the "Apply Configuration" button, it threw an "incompatible ifupdown2 package version" instead of applying the configuration.
-
Reputation Points
- 5 replies
- 1.2k views
- 1 follower
-
-
how to enable KVM on Armbian ?
-
Reputation Points
- 1 reply
- 1.1k views
-
-
Hi, I use bananapif3 as my home router, where our latest official Armbian runs. Everything works well except the flow offload, which is used to accelerate packets handling, doesn't work in Armbian: $ sudo nft add rule inet filter forward ip protocol tcp flow add @f Error: Could not process rule: No such file or directory add rule inet filter forward ip protocol tcp flow add @f ^^^^^^^^^^^ It seems that the kernel config CONFIG_NFT_FLOW_OFFLOAD is not enabled, which might result in this issue: $ zcat /proc/config.gz | grep CONFIG_NFT_FLOW_OFFLOAD # CONFIG_NFT_FLOW_OFFLOAD is not set So would the maintaine…
-
Reputation Points
- 1 reply
- 2.1k views
- 1 follower
-
-
The board works well with Armbian, but currently it is not possible to use USB audio interfaces (sound cards, modems exposing audio functions, VoIP devices, etc.) because the snd-usb-audio module is missing from the kernel and not available as a loadable module. If needed, I can provide logs, test kernels, or help verify the changes. Thanks for maintaining support for this board.
-
Reputation Points
- 1 reply
- 1k views
- 1 follower
-
-
Hi all, Thank to look at following link about my last 5.0.2 standard kernel on HC1 with some issues https://forum.odroid.com/viewtopic.php?f=93&t=34237
-
Hi, Tried searching on docs.armbian.com and the forums but got more confused than anything else. I just installed legacy armbian on my xu4 and the only thing missing is proper video decoding ( vlc won't show any image and mplayer complains that my configuration is too slow ). Could somebody point me to a tutorial on how to enable hardware ( mali t628 ) video decoding ? Thanks for your help !
-
Reputation Points
- 5 replies
- 5k views
-
-
As far as I can see on odroid wiki for the lcd and fan enabling the links leads to ubuntu files. I want to install latest armbian for odroid xu4q board and omv5 so I'm wondering if I can use these files or do I need some other files to enable lcd and fan on cloudshell2 + odroid xu4q and armbian?
-
Reputation Points
- 3 replies
- 3.9k views
- 1 follower
-
-
Hello, i saw a post regarding ZFS > zfs What is the current state of ZFS support? Is it a stable to run ZFS as FS for root fs only on SD card (16-32GB)? I need that for an easy backup on FS level using send/rec commands. But as we know xu4 is 32bit only - > maybe problem with stability - stability 32bit official solution but for rpi4 Or maybe is there a point to use zfs for root fs at all? what about LMV? thanks
-
Fairly sure the current build either includes an incorrect or no ucm config for HDMI Audio support; I've seen other builds eg rock itx have this issue but I believe this may be a potential issue for the q6a build if anyone experiences there is a solution - 1. Install alsa-ucm-conf sudo apt install -y alsa-ucm-conf 2. Download configs cd /tmp curl -sL "https://github.com/alsa-project/alsa-ucm-conf/archive/refs/heads/master.tar.gz" | tar xz 3. Copy QCS6490 configs sudo cp -r alsa-ucm-conf-master/ucm2/Qualcomm/qcs6490 /usr/share/alsa/ucm2/Qualcomm/ sudo cp -r alsa-ucm-conf-master/ucm2/conf.d/qcs6490 /usr/share/alsa/ucm2/conf.d/ …
-
Reputation Points
- 9 replies
- 7.3k views
- 1 follower
-
-
Hi, I'm using Odroid HC1 for quite a long time and I've observed much degradation on SMB/NFS speed when making upgrades to the board. I'm not sure why? Maybe I'll find some idea what it can be. Previously the board was working with speeds >100MB/s when reading from it on Windows (smb) or Linux (nfs) now max speeds on the same configuration are ~40 MB/s. That's way too slow. I don't see any process to hang on pc, while copying using smb the samba process is using not so big amount of CPU on big cores from what I see. I've grabbed armbianmonitor output so you can check it also: http://ix.io/1zrL Currently I'm working on: 4.14.87-odroidxu4 …
-
Reputation Points
- 5 replies
- 6.1k views
- 2 followers
-
-
I've seen a growing memory utilization on my Odroid HC1. It turned out that `irqbalance` is a root cause. It looks like it is a known bug Right now ` irqbalance ` get restarted once per a day to keep it small. $ grep 'resource limit' /var/log/monit.log [MSK Sep 30 21:00:56] error : 'irqbalance' mem amount of 400.0 MB matches resource limit [mem amount>400.0 MB] [MSK Oct 2 01:53:31] error : 'irqbalance' mem amount of 400.1 MB matches resource limit [mem amount>400.0 MB] [MSK Oct 3 06:46:01] error : 'irqbalance' mem amount of 400.2 MB matches resource limit [mem amount>400.0 MB] [MSK Oct 4 11:38:34] error : 'irqbalance' mem amount of …
-
Newbie question I would like to clone a hdd to a new ssd without reinstalling the system. What are the ways to do it on my Odroid-HC1 running Armbian Stretch with boot partition on a SD card? Thanks
-
I learned that the cpu on my hc2 has 4 'slow' cores and 4 fast ones. Now I would want certain apps to always use the fast cores. I found `taskset` to do so. My idea was to just add `taskset --cpu-list 4,5,6,7` in the .service file of the desired app in the execstart line in front. To have it always use the big cores. Would this work? Also I have apps 'calling' unrar to extract files. I don't know how I would do it in this case. I think it'll be a bit complicated to tell the apps to call unrar with `taskset --cpu-list 4,5,6,7`. Is there a way to have unrar always run on the big cores?
-
Reputation Points
- 6 replies
- 5.1k views
-
-
Hi, yesterday I did a apt upgrade and noticed that my omv install also got updated. Now copying from my HC2 I only get like 50 mb/s. I always got like 100 mb/s..at least win explorer showed this, I know it's not accurate. Could the update have erased/overwritten all these nice tweaks @tkaiser made for us to increase tranfer speed? That would be very unfortunate :/ Any chance I can roll back the omv update?
-
Reputation Points
- 7 replies
- 6.3k views
-
-
Ok, so after PHP issues I started off with a fresh armbian install and via armbian-config I installed OMV 4. Install finished without any problems but if I copy stuff via smb the tranfer speed is really bad and I don't know why. On an old install with OMV 3 I used to get nice 100 mb/s. The cpu temp also used to be at like 80 °C during copy, now it looks like this: Following extra options are set in smb.conf: min receivefile size = 16384 write cache size = 524288 getwd cache = yes socket options = TCP_NODELAY IPTOS_LOWDELAY I also checked smbd app, it's running on a big core.... I get the feeling that not all the avaiable resources of my HC2 ar…
-
Reputation Points
- 4 replies
- 7.7k views
-
-
I tried to install armbian to my internal sata drive (SSD: Samsung Evo 850). But the device fails to boot after the root fs is moved. I used the command nand-sata-install with following option: Boot from SD - system on SATA or USB I tried different filesystem formats (ext4, btrfs) and armbian builds: Armbian_5.37_Odroidxu4_Debian_jessie_next_4.9.71 (stable) Armbian_5.37_Odroidxu4_Ubuntu_xenial_next_4.9.71 (stable) Armbian_5.41_Odroidxu4_Debian_stretch_next_4.9.83 (self-built) I dont have a terminal adapter to access the boot logs. Any hints how to get additional information or to fix this issue?
-
Reputation Points
- 13 replies
- 11.8k views
- 3 followers
-
-
Today I wanted to upgrade from jessie to stretch, I'm following this website. After changing the word jessie to stretch in /etc/apt/sources.list and in every file in /etc/apt/sources.list.d/* I noticed that changing the omv-extras-org.list from: # OMV-Extras.org deb https://dl.bintray.com/openmediavault-plugin-developers/erasmus jessie main # OMV-Extras.org Testing deb https://dl.bintray.com/openmediavault-plugin-developers/erasmus-testing jessie main to # # OMV-Extras.org deb https://dl.bintray.com/openmediavault-plugin-developers/erasmus stretch main # OMV-Extras.org Testing deb https://dl.bintray.com/openmediavault-plugin-developers/erasmus-testing stre…
-
Reputation Points
- 2 replies
- 4.5k views
-
-
A recent check of failed services showed me that following service failed: systemd-update-utmp-runlevel.service Checking via journalctl I see this: Failed to write utmp record: No space left on device So far I understood it has to do with the space for the logs being full, I can delete logs to make place. My question is, how could I have that done by default in an easy way? The message itself doesn't bother my that much but I guess there are no new logs created if there's no space which isn't ideal.
-
Reputation Points
- 0 replies
- 3.1k views
-
-
Hi All, I might need your help with one issue I've encountered. I'm running debian with the 4.9.20 kernel on an Odroid XU4 board. I've compiled the kernel with the options for AppArmor enabled. The installed AppArmor version is the 2.10.95 (auditd is also installed in version 1:2.4-1+b1). ## Kernel Options ## CONFIG_SECURITY=y CONFIG_SECURITYFS=y CONFIG_SECURITY_APPARMOR=y CONFIG_SECURITY_APPARMOR_BOOTPARAM_VALUE=1 CONFIG_DEFAULT_SECURITY_APPARMOR=y CONFIG_DEFAULT_SECURITY="apparmor" CONFIG_SECCOMP=y CONFIG_SECCOMP_FILTER=y CONFIG_AUDIT=y ## ## AppArmor itself is working without any issues. If I set…
-
Reputation Points
- 1 reply
- 3.4k views
-
-
Hi All! I was wondering if there is a proper way to deploy a freshly built armbian for Odroid XU4 on an eMMC? Unfortunately, the SD-Card version doesn't seem to work with the eMMC. After searching for this topic I couldn't find anythin in particular related to Odroid. Thanks, Viktor
-
Reputation Points
- 5 replies
- 7.9k views
- 1 follower
-
-
I am now testing armbian on my XU4 and...AMAZING...I have very little fan noise. I am using the Noctua fan as per; http://forum.odroid.com/viewtopic.php?f=65&t=15310 and I haven't even implemented the fan control script [yet]; https://github.com/nthx/odroid-xu3-fan-control Silence is golden... armbian ROCKS!
-
Reputation Points
- 2 replies
- 4.9k views
- 1 follower
-
-
The ChangeLog of Armbian says that overlayfs was added in V5.15. I got installed V5.20 (or actually an earlier and then apt-get upgraded) yet the overlayfs is not available (kernel 3.10.103-odroidxu4). I have even tried installing linux-*-next and *uboot*-next (not even knowing what the -next mean) but it didn't help, still no overlayfs in /proc/filesystems. Also, on reboot the Odroid is missing LAN connection randomly. It can be fixed by running dhclient manually but then the ethernet card is named by systemd. Normally it's eth0 and the networking works. I couldn't figure out what is the root cause of this issue, it seems random. I have also read in a ChangeLog that…
-
Reputation Points
- 7 replies
- 6k views
- 1 follower
-
-
Hi all I'm currently using armbian on a Odroid-XU4 and to use a peripheral I need to patch the kernel. So to start that process i run: apt-get source linux-image-$(uname -r) which failed: Unable to find a source package for linux-image-3.10.102-odroidxu4 I tried adding adding the sources by adding deb-src http://apt.armbian.com jessie main to the armbian.list but this is aparently not a thing. Do any of you have any idea where i can find a souce repository. Thanks in advance. edit: on a sidenote is 3.10.102 really the newest kernel available for this board using armbian?
-
Reputation Points
- 20 replies
- 10.5k views
- 1 follower
-
-
Hello. First of all, thanks for your work and images working for my board :) I am working on S912 game board (board is used for an arcade game hardware) and would like to install gpu drivers. My issue is I don't find any documentation about from official website (ARM) I also wanted to use Panfrost but no documentation exist for installation :( I visited many site and Learn a little about Deb package and dkms package. Now I have a few questions about Can I install deb without dkms or must I install also dkms? How I can install gpu drivers if files like make don't exist on officia…
-
Reputation Points
- 3 replies
- 6k views
- 1 follower
-
-
Dear All, I don't have much experience with the eMMC, and I wonder if I can flash this image: Armbian_22.11.1_Odroidxu4_bullseye_current_5.4.225.img.xz directly into the eMMC through Etcher, or do you recommend DD instead? Thanks... 🙏
-
Reputation Points
- 3 replies
- 3.5k views
- 1 follower
-
-
Following the install instructions from: https://www.wireguard.com/install/#debian-module-tools Wireguard server is working correctly as I have other devices working. I recieve the following output: root@helios4:/etc/wireguard# wg-quick up PiVPNHelios4 [#] ip link add PiVPNHelios4 type wireguard [#] wg setconf PiVPNHelios4 /dev/fd/63 [#] ip -4 address add 10.6.0.5/24 dev PiVPNHelios4 [#] ip link set mtu 1420 up dev PiVPNHelios4 [#] resolvconf -a tun.PiVPNHelios4 -m 0 -x Unknown interface 'tun': No such device [#] ip link delete dev PiVPNHelios4 Have I setup something wrong with wireguard? or is it not fully supported? …
-
Reputation Points
- 4 replies
- 22.4k views
- 2 followers
-
-
Hello, I experimented with various OS-es for my new Odroid-XU4. From what I have learned I like armbian the best because it's the closest to the original debian. A clean, small, tuned up system with the possibility to switch back to sysvinit from system(d). What I would run on it is not a desktop environment but exactly Kodi. The XU4 comes with Ubuntu 16 LTS preloaded to sdcard and I can say this is the OS which maxes out the potential of this hardware. With this after an update & upgrade everything works out of the box: kodi, networking, hdmi-cec, hdmi-audio. With using the unofficial debian jessie for odroid: http://forum.odroid.com/viewtopic.php?f=114&t=175…
-
Reputation Points
- 4 replies
- 9.2k views
- 1 follower
-
-
Hi All, I wanted to add some dtoverlay lines to the pi's config.txt which was in /boot/firmware/config.txt and I notice the folder is empty ? WTF the pi is running ok - how can this be ?
-
Reputation Points
- 2 replies
- 5.3k views
- 1 follower
-
-
So I tried switching my MMIO GPIO to /dev/gpiomem from /dev/mem and it doesn't appear to support the GPZ block https://wiki.odroid.com/odroid-xu4/hardware/expansion_connectors#con_11_-_2x6_pins The address is 0x03860000. Hard Kernel's wiringPi doesn't seem to support this either. Should this be a question I ask Hard Kernel folks? https://wiki.odroid.com/odroid-xu4/software/gpio_register_map
-
Reputation Points
- 1 reply
- 3.2k views
- 1 follower
-
-
I use a Raspberry Pi 5 and use I2C1 with external eeprom. With v25.5.1 up to kernel 6.6.63-current-bcm2711, /dev/i2c-1 is there (activated in /boot/firmware/config.txt with dtparam=i2c_arm=on) and communication with eeprom works fine. With newer kernel versions, communication works not, /dev/i2c-1 does not exist anymore in this case without changing any configuration, just selected newer kernel using armbian-config Any ideas why this happens?
-
Reputation Points
- 9 replies
- 6.1k views
- 3 followers
-
-
Hello, I set up an Odroid-HC1 running Armbian which works fine so far. But today I recognized htop only shows 8 CPUs of type .LITTLE running at a max of 1300Mhz while 4 of them were shown as .BIG CPUs with higher frequency before. The output of cat /proc/cpuinfo is: processor : 0 model name : ARMv7 Processor rev 3 (v7l) BogoMIPS : 36.00 Features : half thumb fastmult vfp edsp neon vfpv3 tls vfpv4 idiva idivt vfpd32 lpae CPU implementer : 0x41 CPU architecture: 7 CPU variant : 0x0 CPU part : 0xc07 CPU revision : 3 processor : 1 model name : ARMv7 Processor rev 3 (v7l) BogoMIPS : 36.00 Features : half thumb fastmult vfp edsp neon vfpv3 t…
-
Reputation Points
- 7 replies
- 6.5k views
- 2 followers
-
-
I have my ODROID XU4 configured so that the SD /boot files boot the machine on a SSD formatted to ext4. This works fine with 4.9.30, but fails with the 4.9.33 kernel I installed today. The only useful message I see is that it can't find my SSD's uuid. The uuid is correct so I suspect that the kernel does not have or is not loading a USB driver. Does anyone have a suggestion on how to boot using the 4.9.33 kernel? Thanks, Michael
-
Reputation Points
- 3 replies
- 4.8k views
- 1 follower
-
-
I'm running a Helios4 NAS with OMV 5.6.6-1 and ZFS 2.0.3. After running for approximately a week it becomes unresponsive - OMV login shows a blue screen but doesn't get to login page, SSH timeout and serial login just keeps going back to the login prompt without asking for the password. Repowering the unit (physically disconnecting the power because there is no way to shut it down gracefully) brings it back to life and it runs again for a week or so before the same thing happens again. I'm not quite sure where to start troubleshooting this. Any ideas ?
-
Reputation Points
- 5 replies
- 4.2k views
-
-
Hello all, I have installed the image "Armbian 23.02.0-trunk.0176 Lunar with bleeding edge Linux 6.1.6-bcm2711" on my two Raspi 4 systems. One system runs via cable and the other via WLAN. At the beginning there were some problems with the IPv6 - kernel, if "apt update" was executed. I got this problem under control with "disable ipv6".... Since then, both systems run flawlessly & without problems. With the implementation of GPIO you should fall back on an existing GPIO - version, which works in any case also under this image; also for 64bit. One small thing I would like to know very much, because on the system with the cable the…
-
Reputation Points
- 1 reply
- 3k views
- 1 follower
-
-
Hello all, As I have often said, I am very satisfied with this LINUX implementation on the RASPI PI4 board. In the meantime, I noticed one small thing and that was somehow related to the 4GB version of my RASPI. I often had to record a KERNEL crash here; this did not happen under the 8GB version until now. But now to my actual question: How can I activate the CAMERA port under this Linux version so that I can connect a camera there? Best regards Z. Matthias
-
BPI-F3 Introduction For this device, we can make an image using the Source Code: BananaPi_BPI-F3#_development Let's try to add support to the Armbian build system.
-
Hello, I am experiencing a critical issue with my Helios4 board from Kovol after a recent power outage. When I power on the device, the fans start spinning, but none of the LEDs illuminate at all. This includes the power LED and any activity LEDs. Anybody can help me?. I thought it might be the power supply, but I can't find where I could buy it. Does anyone know where to find it? Thank you very much.
-
Hi all, I'm running a couple of ODroid XU4's as a server. Yesterday I ran an update and after this update the board no longer boots... (I was running Armbian Focal kernel 4 I have tested a 'fresh' armbian image and then the system boots without issues. I have saved what packages are updated and wonder if I would be able to restore this somehow? A log of the update (never mind the dutch) https://pastebin.com/WWP2DFfC I used to have kernal 5.4 on this board, but I downgraded about 6 months ago. Could that be the issue? Because in the log I read: Uitpakken van .../77-linux-image-current-odroidxu4_21.02.2_armhf.deb wordt …
-
Hello, HELIOS4 system was running (and doing nothing), when it suddenly crashed. After restart, nothing automatically loaded (system stuck in emergency mode), once USB cable plugged i managed to log only once into the system, and discovered that no disks where mounted anymore (not even available / detect by the board) (it's not so easy as it seems there are some freezes, maybe due to the hardware errors related to he missing hdd links) 13:00 root@helios4 ~# ll /dev/sd* zsh: no matches found: /dev/sd* Is this a failing PSU (like in other threads) ? To be noted : the PSU has a blinking green light ... i can't rememb…
-
Reputation Points
- 3 replies
- 3.9k views
- 1 follower
-
-
armbianmonitor -u: http://ix.io/2Lae Did an apt update/upgrade & reboot today, and the system came back up but none of the drives did. Imaged a new SD card with stock armbian, and still no luck. Measured the voltage of the PS (at the plug, not the molex connector) at 12.3v Anything else I can check/try?
-
Reputation Points
- 6 replies
- 4.1k views
- 1 follower
-
-
Hi All, I'm a happy user of a Helios4, and have been for several years now. However, at some point it will be challenging to continue to support it, and I'd rather be proactive about maintaining access to my data than scrambling around. Do people here have recommendations on current hardware that can replace the Helios4? It would need to meet the baseline hardware requirements of the existing hardware. Bonus points if one can re-use the laser-cut case Thanks!
-
Reputation Points
- 5 replies
- 5.9k views
- 2 followers
-
-
Does anyone know any way to fix the annoying way the fan works on this device? Even on idle load, the fan spins up every couple of minutes, keeps spinning for a few seconds, then turns off again, only to repeat a few minutes later. I can't even sleep in the same room the device is in... I've tried using this: https://github.com/f1vefour/odroid-xu4-fan-control And it hasn't really solved anything, as the fan cannot start on PWM values lower than 100... it instead makes squeaking noises. So having adjusted the script, nothing has really changed. Is there something I could do to fix this in software? Perhaps something that doesn't involve getting the heatsink …
-
Hi Armbian forum people! I'm trying to setup bcache for my openmediavault. But it seems the `bcache` module is not installed? Which means I cannot use `bcache` at the moment with openmediavault. I do know that the bcache has been added only recently: * https://github.com/armbian/build/pull/9550?ref=blog.armbian.com * "Enable BCACHE on Raspberry Pi build" But no go so far.. Is there anything I can do?
-
Hello, Is anybody able to install and install Armbian bookworm on Proxmox (OVMF uefi, Q35)? I tried multiple times but proxmox doesn't recognize the UEFI partition and I can only boot from the USB... Debian boots fine tho.
-
I'm having a hard time clarifying if OMV 5 is stable on Helios 4 and if there are any successful builds out there. Since there doesn't seem to be an upgrade path from OMV4 -> OMV5 and so requiring a full rebuild, I want to understand as much as possible before actually trying this new version out. Any successes out there?
-
Reputation Points
- 9 replies
- 8.1k views
- 1 follower
-
-
I'm using Armbian 23.02.2 Bullseye with Linux 5.15.93-mvebu and OMV6. I want to upgrade to Armbian 23.5.1 Bookworm with Linux 6.1.30. Up to now no upgrade is offered. If the answer to the thread title is "yes" I need help how to do the upgrade. If the answer is "no" I kindly ask for information about the reason not to be able to upgrade. By the way: Helios4 is a maintained platform, maintainer is @Heisath
-
Reputation Points
- 4 replies
- 3.5k views
- 1 follower
-
-
Hi. I have a Odroid XU4 with Ubuntu Bionic latest release (5.60), powered with this UPS: APC SmartUPS 750 VA. Apcupsd doesn't work. The problem seems related to the missing /dev/usb/hiddev0. After searching on Google, I found that apcupsd requires this feature enabled in the kernel. CONFIG_USB_HIDDEV=Y I build my own kernel enabling it, but no change. Here the output of the command # dmesg | grep Smart [ 4.125553] usb 1-1.2: Product: Smart-UPS 750 FW:651.13.I USB FW:7.3 [ 4.205622] hid-generic 0003:051D:0002.0001: hidraw0: USB HID v1.10 Device [American Power Conversion Smart-UPS 750 FW:651 On the Rock64 board it works without…
-
Reputation Points
- 16 replies
- 8.5k views
- 2 followers
-
-
My hardware: Odroid HC2 Armbian 24.5.1 Bookworm with Linux 6.6.31-current-odroidxu4 : My backup restoration → Has other issues too → But apt upgrade results in various size and hash mismatches. Offtopic: apt upgrade or sudo dpkg --configure -a always crash the system (since summer 2024, troubleshooting without success since christmas 2024) Ruled out HW failure 80-90%. My local apt/dpg cache was corrupted, thus at /var/lib/dpkg/ backed up info/ to info.bak/ and mkdir info/ afresh. And now sudo dpkg --configure -a completed successfully the very first time! But 2025-02-09 ca. 12:00 CET and also later the afternoon apt…
-
Reputation Points
- 53 replies
- 20.7k views
- 3 followers
-
-
Just updated many armbian files shown as available for update. After the update sudo apt update shows the error message: E: The repository 'http://apt.armbian.com bookworm Release' is no longer signed. N: Updating from such a repository can't be done securely, and is therefore disabled by default. N: See apt-secure(8) manpage for repository creation and user configuration details. How can I fix this or was signing simply forgotten? Thank you!
-
Hello, I know that Kobol is out of Business.. But I am thinking...what if my helios4 motherboard die...? To mitigate that, I want to acquire new motherboard. Does any one knows how I could get one? Thanks in Advance
-
... however Armbian_23.8.1_Helios4_bookworm_current_6.1.50.img.xz worked well and was then upgraded through apt to 24.2.1 / 6.6.16. I was then able to install OMV 7, Plex media server and Transmission on top. warning - the ethernet ports change, breaking scripts where they're hardcoded, e.g the wol service. changing the port in two places in the file and running systemctl daemon-reload ; systemctl restart helios4-wol seems to be running ok. This details the patch: diff --git a/lib/systemd/system/helios4-wol.service.orig b/lib/systemd/system/helios4-wol.service index 965eb74..451b857 100644 --- a/lib/systemd/system/helios4-wol.servic…
-
Reputation Points
- 0 replies
- 2.2k views
- 1 follower
-
-
This is what I get when I select the "Direct download" link. See the attached screenshot:
-
Reputation Points
- 5 replies
- 4.9k views
- 1 follower
-
-
Hello community! I have performed an update from armbian 11 to 12 and OMV 6 to 7 and completed it successfully so far. Unfortunately just the package armbian-bsp-cli-odroidxu4 was not upgraded due to a missing dependency: +++ The following packages have unmet dependencies: armbian-bsp-cli-odroidxu4-current : Depends: base-files (>= 24.5.1) but 12.4+deb12u6 is to be installed E: Unable to correct problems, you have held broken packages. root@omv:~# sudo apt install 12.4+deb12u6 Reading package lists... Done Building dependency tree... Done Reading state information... Done E: Unable to locate package 12.4+deb1…
-
Reputation Points
- 17 replies
- 8.5k views
- 3 followers
-
-
HC2 here. Two last 6.1 kernels broke alsa : hw not accessible anymore. Aplay -l lists audio outputs but none may be used. Looks like an omission on kernel flags.. Reverted to Armbian Bullseye : exact same config, but working.
-
Hi, I have been running Armbian Buster on an Odroid HC1 for a while but today one upgrade is held back: The following packages have been kept back: libc-dev-bin 0 upgraded, 0 newly installed, 0 to remove and 31 not upgraded. This is why: $ sudo apt install libc-dev-bin Reading package lists... Done Building dependency tree Reading state information... Done The following package was automatically installed and is no longer required: linux-libc-dev Use 'sudo apt autoremove' to remove it. Recommended packages: manpages manpages-dev The following packages will be REMOVED: armbian-config build-essential g++ g++-8 libc6-dev libstdc++-8-dev…
-
Reputation Points
- 1 reply
- 3.5k views
-
-
After I closed the lid of my chromebook Armbian decided to die even across reboots. https://drive.google.com/file/d/1gkEzVoY5QkNcWq3MOKYUSc8nkFYg91p-/view?usp=sharing Video of what I see https://drive.google.com/file/d/17yhnIjzkiYkkVohFrLf7MKDtYyb0xfOL/view?usp=sharing
-
Reputation Points
- 0 replies
- 955 views
- 1 follower
-
-
are there plans to produce a version of armbian for odroid hardware. the new xu4 seems to be amazingly fast... andrew
-
The bios boot menu will not boot at all from that USB stick, unlike from ironrobin aarch64 or ubuntu concept x13s, which do boot (and install).
-
I am using an odroid HC2 as home NAS for some years now. Software is armbian/XU4 in debian flavour. At the moment I am running bookworm (which was updated from buster to bullseye and then to bookworm - I know its not supported but it worked fine. And the problem described here started only some month after the last update). Some days ago I wanted to reboot the unit but it was stuck in the boot process. Not available by ssh or any other services. I then found out that the boot stopped because my hard disk could not be mounted from ftsab (while the sd card as root file system could be mounted). After commenting out the line it boots normally. And when logged in by ssh …
-
Reputation Points
- 0 replies
- 2.7k views
- 1 follower
-
-
Hi, New user here - I Just download the current version of Armbian today with the hopes of using it on my Raspberry Pi 5B. After unzipping it, I created an image on a usb stick using Raspberry Pi Imager - use custom. However, it is not booting. It only shows a few lines on the screen, the last being: Begin: Running /scripts/local-block ... done. (screen shot below) What am I doing wrong?
-
Reputation Points
- 11 replies
- 8.8k views
-
-
How to install Armbian on an eMMC module? Simply using Armbian Imager with the image file doesn't work—the system won't boot. The official Radxa OS boots fine from the same eMMC module.
-
I wanted to try Armbian on a Raspberry Pi-5 with a Radxa penta SATA hat. Installed: Armbian_community_25.2.0-trunk.86_Rpi5b_bookworm_current_6.6.63_minimal.img The SATA hat is not detected: root@rpi5b:~# lspci 00:00.0 PCI bridge: Broadcom Inc. and subsidiaries BCM2712 PCIe Bridge (rev 21) 01:00.0 Ethernet controller: Raspberry Pi Ltd RP1 PCIe 2.0 South Bridge I would expect this: root@raspi:~# lspci 0000:00:00.0 PCI bridge: Broadcom Inc. and subsidiaries BCM2712 PCIe Bridge (rev 21) 0000:01:00.0 SATA controller: JMicron Technology Corp. JMB58x AHCI SATA controller 0001:00:00.0 PCI bridge: Broadcom Inc. and subsidiaries BCM2712 PCIe Bridge (r…
-
Hi everyone! Can anyone tell me how to make the system boot without displaying any text characters? I'd like to just see the Radxa logo, then a black screen and the login screen (GDM). What settings do I need to configure to achieve this? I have the Armbian 2.6.4 Trixie CLI image installed with GNOME.
-
Since 10 days I try to install NextcloudPi on Odroid HC1. Unfortunately neither the nextcloud image nor the armbian image boots on the Odroid HC1. Also an attempt with OMV failed. In my experience with the raspi, the sd card had to have a boot partition and a rootfs partition. Etcher and dd always create only one rootfs. The blue LED flashes: short, short, pause. Also exchanged hardware was unsuccessful (HC1 and SD cards).
-
Reputation Points
- 28 replies
- 9.5k views
- 4 followers
-
-
For Armbian-24.11.0 RPi ubuntu noble based builds wlan interface is missing Issue is present in Rpi3 B plus, RPi4 for current (kernel 6.6.x) and edge (kernel 6.10.x) armbian builds OS info ================ pi@rpi4b:~$ cat /etc/os-release PRETTY_NAME="Armbian-unofficial 24.11.0-trunk noble" NAME="Ubuntu" VERSION_ID="24.04" VERSION="24.04 LTS (Noble Numbat)" VERSION_CODENAME=noble ID=ubuntu ID_LIKE=debian HOME_URL="https://duckduckgo.com/" SUPPORT_URL="https://community.armbian.com/" BUG_REPORT_URL="https://armbian.atlassian.net/" PRIVACY_POLICY_URL="https://duckduckgo.com/" UBUNTU_CODENAME=noble LOGO="armbian-logo"…
-
Reputation Points
- 6 replies
- 8.7k views
- 1 follower
-
-
armbian-bsp-cli-odroidxu4-current is held back because base-files_25.2.2-13ubuntu10-noble_armhf does not exist (again). As before, the fix seems to be wget https://apt.armbian.org/apt/pool/noble-utils/b/base-files/base-files_25.2.2-13ubuntu10-noble_amd64__1-noble-1armbian1-Baa17-U13ubuntu10-R55fa.deb wget https://apt.armbian.org/apt/pool/noble-utils/b/base-files/base-files_25.2.2-13ubuntu10-noble_armhf__1-noble-1armbian1-Baa17-U13ubuntu10-R55fa.deb dpkg-deb -x base-files_25.2.1-13ubuntu10-noble_armhf__1-noble-1armbian1-Baa17-U13ubuntu10-R55fa.deb armhf dpkg-deb -x base-files_25.2.2-13ubuntu10-noble_amd64__1-noble-1armbian1-Baa17-U13ubuntu10-R55fa.de…
-
I bought an helios4 (and run helios4 4.19.63-mvebu) to replace a bananapi server under armbian, the bananapi was running a DRBD node, so I need this service. I first tried to install it, and have seen that DRBD was not configured in the kernel linux-image-next-mvebu 5.91. and the module was missing I checked in the git repository that linux-mvebu64-next.config has now this configuration option, and thought that I will get a new kernel by switching to nightly build. As this option is offered by armbian-config I toggled it. After some time my Helios4 failed to reboot and was bricked. I mounted my SD on an other system to try to analyze the situation, nothing app…
-
Reputation Points
- 11 replies
- 8k views
- 1 follower
-
-
I needed to downgrade from 4.19 back to 4.14 so I wanted to use armbian-config/system/other. It gave me an empty list. To fix that, in /usr/lib/armbian-config/functions.sh I needed to change the apt-cache command as follows: apt-cache show linux-image-next-odroidxu4 | grep -E "Package:|version:|Version:" | sed -n -e 's/^.*: //p' | sed 's/\.$//g' I added "-next-" That gave me a list, finally. Then the next issue: apt -s -y --allow-downgrades --no-install-recommends install linux-image-next-odroidxu4=5.60 linux-dtb-next-odroidxu4=5.60 failed with: E: Command line option --allow-downgrades is not…
-
Reputation Points
- 6 replies
- 5.4k views
- 2 followers
-
-
I'm attempting an install to the eMMC on a CM4 (mounted on an Axzez Interceptor) using armbian-install. I've booted Armbian 23.5 Jammy CLI from USB, and armbian-install runs fine, (boot from eMMC, system on eMMC) After transferring the rootfs I get the "Cleaning up ... Almost done." message, and then the following: Error while creating U-Boot loader image with mkimage Error: no u-boot package found, exiting I've run a full update / upgrade and installed armbian-config with no change. What's missing here?
-
Reputation Points
- 0 replies
- 3.6k views
- 1 follower
-
-
I'm generating an image version and I noticed that WIFI is not being activated. Until the Armbian-unofficial_24.11.0-trunk_Rpi4b_jammy_current_6.6.58_minimal version it worked and after that it stopped. Can someone help?
-
Reputation Points
- 12 replies
- 4.7k views
- 1 follower
-
-
armbianEnv.txt is missing from latest XU4 focal image Armbian_21.08.5_Odroidxu4_focal_current_5.4.159_minimal.img. Should I just create on or use boot.ini?
-
Hi all! :-) To those who made the excellent work for my oroid! Well done, very well done! Well, just one point, maybe: Sep 08 13:47:55 odroidxu4 systemd[1]: Starting Atop process accounting daemon... Sep 08 13:47:55 odroidxu4 atopacctd[17567]: /run/pacct_shadow.d: File exists Sep 08 13:47:55 odroidxu4 systemd[1]: atopacct.service: PID file /run/atopacctd.pid not…ctory Sep 08 13:47:55 odroidxu4 systemd[1]: Failed to start Atop process accounting daemon. Sep 08 13:47:55 odroidxu4 systemd[1]: atopacct.service: Unit entered failed state. Sep 08 13:47:55 odroidxu4 systemd[1]: atopacct.service: Failed with result 'resources'. Hint: Some lines wer…
-
Reputation Points
- 7 replies
- 4.7k views
- 1 follower
-
-
I need squashfs for snap, but it seems it's not there. I tried installing libsquashfs-dev, libsquashfs1, libsquashfuse0, squashfs-tools, squashfuse, but no improvement Tips how to solve this? sander@bananapif3:~$ sudo modprobe squashfs modprobe: FATAL: Module squashfs not found in directory /lib/modules/6.1.15-legacy-k1 sander@bananapif3:~$ lsb_release -a No LSB modules are available. Distributor ID: Ubuntu Description: Armbian-bpi-SpacemiT 24.5.0-trunk noble Release: 24.04 Codename: noble sander@bananapif3:~$ apt list --installed | grep -i squashfs WARNING: apt does not have a stable CLI interface. Use wit…
-
Reputation Points
- 1 reply
- 2.8k views
- 1 follower
-
-
The graphical interface is very slow and glitchy when I booted my BPI-F3 running the latest Armbian provided (Ubuntu variant). The cursor glitches in and out, and it takes forever for the onboard display to open applications, display text typed in, etc (It took around 5 minutes to open System Monitor, and 1 Minute to open Terminal). I have accessed it also via SSH and a USB-Serial converter, and those respond very quickly, therefore I think It has something to do with GPU support. I also found this other version with GPU acceleration, albeit an older version of Armbian, which ran fine. Mine currently boots off of EMMC and runs off of NVME (although the same was when I ini…
-
Reputation Points
- 9 replies
- 5.8k views
- 2 followers
-
-
Try to upgrade from 25.5.1 but base-files not present in repository. Missed again. @Igor can you fix it?
-
Title says it all. "_amd64" and "_arm64" are in the apt repository "_armhf" is missing.
-
Hi, please, which core are You using on odroid HC2? I am running on HC2 only openmediavault, but i will try nextcloud in the docker - which core image is better for?
-
Reputation Points
- 1 reply
- 3.8k views
- 1 follower
-
-
I see the download page says there are USB 3 issues with the mainline kernel (and eMMC, which the board doesn't even have?) and serial console for legacy kernel is broken. I've also read that HMP isn't supported on mainline either. Which kernel is recommended for general mini server usage with an attached hard drive and the OS installed on the hard drive with SD only for boot? I'm thinking of replacing my old cubietruck with it, running nginx as an SSL web proxy and a little bit of web serving.
-
Hi all, I wanted to do some cross arch builds on my newly installed Armbian on an Odroid-HC1 buuut, it seems binfmt_misc support is not enabled in the kernel. Can I enable it somehow without recompiling the kernel? Thank you for this great image, kernel 5.4, omg!
-
When I run the Linux kernel on the Odroid XU4 board, it enters a loop with this error during boot: U-Boot 2017.05-00008-g6a9ddb8303-dirty (May 19 2020 - 19:48:01 +0900) for ODROID-XU4 CPU: Exynos5422 @ 800 MHz Model: Odroid XU4 based on EXYNOS5422 Board: Odroid XU4 based on EXYNOS5422 Type: xu4 DRAM: 2 GiB MMC: EXYNOS DWMMC: 0, EXYNOS DWMMC: 1 MMC Device 0 ( SD ): 29.7 GiB mmc_init: -5, time 4 *** Warning - bad CRC, using default environment In: serial Out: serial Err: serial Net: No ethernet found. Press quickly 'Enter' twice to stop autoboot: 0 reading /boot.ini 2401 bytes read in 4 ms (585.9 KiB/s) ## Executing script at 43e00000 reading config.ini…
-
I received a Helios4 and was finally able to get it to boot. As per instructions, I booted from microSD and flashed the latest Armbian image to sda1 via the nand-sata-install command. This reboots fine now, but only with the microSD-card present and the SW1 dipswitch set to "SD card boot mode". Is anybody here using "SPI NOR Flash" or "SATA1" boot mode to get rid of the microSD card? I am bit handicapped here since my serial port on the microUSB only comes up maybe 1 in 10 times. I wonder if it's worn out or if I am simply doing something wrong. Related Links: 1 2 3 4
-
I've been running Armbian on an Odroid HC1 board for some time now. We've just had a kernel upgrade and it now boots as an XU4 according to the motd. This used to be changeable with armbian-config (I did this regularly on kernel updates). But, with the new armbian-config I can't find a way to do this any more. *edit A bit more info Running SY017 in armbian-config gives an empty list, and I get this error: ls: cannot access '/boot/dtb/overlay/*.dtbo': No such file or directory In fact /boot/dtb/overlay/ does not exist
-
Reputation Points
- 15 replies
- 9.7k views
- 2 followers
-
-
Is there an armbian software distribution for the "Broadcom BCM2711" ? (rasberrypi 4)
-
Reputation Points
- 6 replies
- 6.7k views
- 1 follower
-
-
4 2.5" HDDs. [ 1242.509097] BTRFS info (device sda): scrub: started on devid 1 [ 1242.560838] BTRFS info (device sda): scrub: started on devid 4 [ 1242.615578] BTRFS info (device sda): scrub: started on devid 3 [ 1242.703587] BTRFS info (device sda): scrub: started on devid 2 [ 3731.573257] ata2.00: exception Emask 0x0 SAct 0xffffffff SErr 0x0 action 0x0 [ 3731.573272] ata2.00: irq_stat 0x40000001 [ 3731.573279] ata2.00: failed command: READ FPDMA QUEUED [ 3731.573283] ata2.00: cmd 60/80:00:00:2f:2b/00:00:03:00:00/40 tag 0 ncq dma 65536 in res 41/40:d8:30:e2:f6/00:00:05:00:00/40 Emask 0x9 (media error) [ 3731.573300] ata2.00: status: { D…
-
I attempted to file a bug using `reportbug`, but since the kernel package is from Armbian and the report went to Debian, I assume that is a dead end. https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=1137721 I will mostly copy/paste from that report, here, but I also ran `armbianmonitor -u`. https://paste.armbian.com/wenegucita I run a home backup server with a 1TB SSD attached to an ODroid HC1 board. There is no redundancy, but I do keep a limited history of snapshots, taken hourly and trimmed down to a small number of hourly, daily, weekly, monthly, and yearly snapshots. There should be at most about 20 snapshots ex…
-
Armbian_22.11.0-trunk_Rpi4b_jammy_current_5.15.73_xfce_desktop.img.xz Raspberry PI400 Viewsonic VP930 (1280x1024) I checked the sha-sum and flashed 2 times a Patriot SXDC-128GB-card. When I boot the PI400 the monitors LED changes from green (power on) to yellow (standbye) for half an hour, when I start the PI400. It looks like there is a problem with this old monitor which supports 1280x1024 only. Don't know, if the boot routine checks the monitor, but the green LED can stay for 2sec, sometimes for 30sec. BTW Xubuntu 22.04 with an SSD works fine with the same hardware.
-
I was trying get sys-oled running on a new installation (upgrade, really) of bullseye. If go with the original Kobol github version, https://github.com/kobol-io/sys-oled, it fails to build RPI.GPIO and something else. I also found an alternate at https://github.com/rpardini/sys-oled-hc4, that builds, but when I run it, it complains about a thermal call in python: # sys-oled --display sh1106 Traceback (most recent call last): File "/usr/local/bin/sys-oled", line 142, in <module> main() File "/usr/local/bin/sys-oled", line 132, in main display_info(device) File "/usr/local/bin/sys-oled", line 105, in display_info draw.text(…
-
Reputation Points
- 3 replies
- 3.3k views
- 2 followers
-
-
Hi. I have tried to Upgrade my Helios 4 nas but was unsuccessful. I tried several times with bookworm and OMV7 but every time I do an update of bookworm it breaks everything and the nas does not boot anymore. Is there a way to download again a bullseye image for helios 4 ? I couldn't find any by myself and wod appreciate a link. Thank you
-
Reputation Points
- 9 replies
- 4.5k views
- 1 follower
-
-
My board is Odroid HC1 Using balenaEtcher under Windows 10 I have instaled today Armbian_20.05.7_Odroidxu4_buster_current_5.4.50_minimal.img.xz and also was trying before Armbian_20.05.7_Odroidxu4_buster_legacy_4.14.187.img.xz. On both images I wanted to increase verbosity to 7 to see in serial console boot process. Changes in boot.ini are not used during boot until symlink /boot.ini is created which point to /boot/boot.ini Until this is done you will se uboot error that script /boot.ini is not found. Please add this symlink to images for XU4/HC1. Second issue is that editing armbianEnv.txt is not overwriting values in boot.ini. I ha…
-
Hello I can not seem to get my USB Ethernet dongle with a r8152b chip to work on the latest armbian focal release. I tied both kernels 4.14.y. and 5.4.y with no luck. It works on "clean" ubuntu focal when i first plug it it without drivers and when i add the drivers. I am also posting in the odroid fourms here: https://forum.odroid.com/viewtopic.php?f=172&t=38713&p=306027#p306027 I am following these directions: tar -xf r8152.53.56-2.13.0.tar.bz2 cd r8152-2.13.0 make sudo make install lsmod | grep r8 If this works, and if the module does not load at reboot, add "r8152" in modules.conf: sudo vi /etc/modules-load.d/modules.conf…
-
I have a RasPi 4b, I'm trying to understand how the device tree is modified so I can use the methodology eventually for a board that has a CM4 on it. So from a virgin clone of the build repo: ./compile.sh BOARD=rpi4b BRANCH=edge RELEASE=bookworm BUILD_MINIMAL=yes KERNEL_CONFIGURE=no KERNEL_GIT=full install image on SD card and boot the device, go through Armbian-setup. All well and good, then varify device tree used for the boot: cat /proc/device-tree/model gets me a: Raspberry Pi 4 Model B Rev 1.5 OK so now lets modify the device tree: ./compile.sh BOARD=rpi4b BRANCH=edge RELEASE=bookworm BUILD_MINIMAL=yes KERNEL_CONFIGURE=n…
-
Reputation Points
- 1 reply
- 3.5k views
-
-
What happened? I used image https://github.com/armbian/community/releases/download/26.2.0-trunk.606/Armbian_community_26.2.0-trunk.606_Ayn-odin2_noble_current_6.18.19_gnome_desktop.img.xz and I found the device cannot boot into desktop. It stuck in the first boot wizard after message "Please use this account for your daily work from now on." How to reproduce? Download image from https://github.com/armbian/community/releases/download/26.2.0-trunk.606/Armbian_community_26.2.0-trunk.606_Ayn-odin2_noble_current_6.18.19_gnome_desktop.img.xz Flash it to TF card using Armbian Imager Insert the TF card to Odin2 device and power on Wait for it to boot…
-
Reputation Points
- 4 replies
- 2k views
- 1 follower
-
-
I installed a Debian Jessie on an Odroid HC1, and trying to connect an encrypted disk to it via USB. blkid lists the device: # blkid /dev/sdb1: UUID="2288876d-0fe8-4b5a-b7d1-1660df8b2e25" TYPE="crypto_LUKS" PARTUUID="c8895b7f-01" but when I try to open it with luksOpen: # cryptsetup luksOpen /dev/sdb1 sdb1_crypted Enter passphrase for /dev/sda1: After entering the passphrase (and Enter), it hangs. The SSH connection times out after 1-2 minutes (where to enlarge?) and there is no HDMI on the HC1, so I am left blind. The disk was created and used in another system and worked perfectly on a Raspberry PI and my Linux PC. I created a key file and added…
-
Reputation Points
- 5 replies
- 3.7k views
- 1 follower
-
-
Hi, I am trying to get my Xu4 to boot from an emmc card, I am using Armbian Bionic mainline kernel 4.9.y. I can write this to SD card, and it boots and runs OK. I prepared the emmc card using the inbuilt system nand-sata-install script. The emmc card will not boot. I tried a couple of other iso.s same non result. Checking the forum I found this thread started last year:- This thread was HIJACKED by Tkaiser , who turned it into a discussion about OMV, and I cannot see a successful conclusion to the original boot problem! Please can you advise me of the method to get my emmc card to boot on my xu4, using the curre…
-
Reputation Points
- 2 replies
- 6.4k views
- 2 followers
-
-
Hello, when I try to update the kernel via armbian-config (System -> Other ), I always get the message "Test installed failed. Can't change firmware". I use the Image "Armbian_22.08.5_Uefi-x86_bullseye_current_5.15.73" The /tmp/switch_kernel.log says the following linux-image-current-x86=22.08.6 linux-dtb-current-x86=22.08.6
-
Hi, I'm trying to run weston on Odroid XU4, but it does not start. Seems something is wrong with GPU drivers. I have installed "Armbian 25.2.1 Bookworm Minimal" image and then installed weston via apt. Then, trying to run the weston fails with error: Date: 2025-04-13 UTC [13:47:44.248] weston 10.0.1 https://wayland.freedesktop.org Bug reports to: https://gitlab.freedesktop.org/wayland/weston/issues/ Build: 10.0.1 [13:47:44.249] Command line: weston [13:47:44.249] OS: Linux, 6.6.81-current-odroidxu4, #1 SMP PREEMPT Mon Dec 30 15:59:39 UTC 2024, armv7l [13:47:44.249] Flight recorder: enabled…
