Other families

My hardware: Odroid HC2 Armbian 24.5.1 Bookworm with Linux 6.6.31-current-odroidxu4 : My backup restoration → Has other issues too → But apt upgrade results in various size and hash mismatches. Offtopic: apt upgrade or sudo dpkg --configure -a always crash the system (since summer 2024, troubleshooting without success since christmas 2024) Ruled out HW failure 80-90%. My local apt/dpg cache was corrupted, thus at /var/lib/dpkg/ backed up info/ to info.bak/ and mkdir info/ afresh. And now sudo dpkg --configure -a completed successfully the very first time! But 2025-02-09 ca. 12:00 CET and also later the afternoon apt…

• 1

  Reputation Points

• 53 replies
• 20.7k views
• 3 followers

Davy

February 14, 20251 yr

Hi I am new to this forum and to Armbian but am enjoying the work of all those who have contributed. having installed Armbian for the first time could someone please confirm or otherwise if WiFi is supposed to be working on the RPI5 internal adapter? my install does not even see it at all it’s like it does not exist can it be turned on in simple terms for a noob?

• 0

  Reputation Points

• 8 replies
• 6.4k views
• 1 follower

Igor

February 13, 20251 yr

Please forgive me if it is a stupid question, but what is preventing us from keeping n previous kernels installed in case an update is broken and does not boot? Fedora does it, Ubuntu does too. In general it should be simpler to boot a previous kernel than to try to pull the SD card and fix it in a second machine.

• 1

  Reputation Points

• 1 reply
• 2.2k views
• 1 follower

SteeMan

February 12, 20251 yr

The graphical interface is very slow and glitchy when I booted my BPI-F3 running the latest Armbian provided (Ubuntu variant). The cursor glitches in and out, and it takes forever for the onboard display to open applications, display text typed in, etc (It took around 5 minutes to open System Monitor, and 1 Minute to open Terminal). I have accessed it also via SSH and a USB-Serial converter, and those respond very quickly, therefore I think It has something to do with GPU support. I also found this other version with GPU acceleration, albeit an older version of Armbian, which ran fine. Mine currently boots off of EMMC and runs off of NVME (although the same was when I ini…

• 0

  Reputation Points

• 9 replies
• 5.8k views
• 2 followers

c0rnelius

January 30, 20251 yr

A while ago (February '24), I downloaded and installed Armbian_23.11.3_Rpi5b_bookworm_current_6.1.68_cinnamon_desktop. It is running OK, and I only have a few issues with it. One issue is that the vcgencmd is not working. I posted a question about it on the forum and received a reply saying that this would be solved "when possible." However, it is still not resolved. Without this command working, I cannot get the CPU temperature, so I cannot control the cooling fan. I checked for a newer release today to see if this issue is fixed. I was shocked to see no Bookworm with Cinnamon release available. I'd like to know if it is in the works or has been dropped and wil…

• 0

  Reputation Points

• 4 replies
• 6.2k views
• 1 follower

andrewufrank

January 16, 20251 yr

Hello guys! Probably some of you know me as the MadEDoctor from Youtube. For those of you who don't know my channel and don't know what I am doing at the moment - Long story short I got my hands on a 16GB RAM chip that should be compatible with the Raspberry Pi 4 hardware. But there is a problem I am facing... That is I am unable to boot any OS different from VMware (arm version) and RISC OS (that is pretty much useless). When I try to boot Raspbian for example - It shows the rainbow square and then gets stuck on a completely black screen and it draws around 500mA... I contacted Jeff Geerling with the hope he could help with this project. He wrote a post on the …

• 1

  Reputation Points

• 4 replies
• 9.1k views
• 1 follower

BOFFBOY

January 13, 20251 yr

For Armbian-24.11.0 RPi ubuntu noble based builds wlan interface is missing Issue is present in Rpi3 B plus, RPi4 for current (kernel 6.6.x) and edge (kernel 6.10.x) armbian builds OS info ================ pi@rpi4b:~$ cat /etc/os-release PRETTY_NAME="Armbian-unofficial 24.11.0-trunk noble" NAME="Ubuntu" VERSION_ID="24.04" VERSION="24.04 LTS (Noble Numbat)" VERSION_CODENAME=noble ID=ubuntu ID_LIKE=debian HOME_URL="https://duckduckgo.com/" SUPPORT_URL="https://community.armbian.com/" BUG_REPORT_URL="https://armbian.atlassian.net/" PRIVACY_POLICY_URL="https://duckduckgo.com/" UBUNTU_CODENAME=noble LOGO="armbian-logo"…

• 0

  Reputation Points

• 6 replies
• 8.7k views
• 1 follower

c0rnelius

January 12, 20251 yr

Hi my good old helios4 with OMV had been running for few years without big issue. but it suddenly lost all SATA HDD. OMV shown the 2 HDD are missing. i reboot it and during the boot i saw couple of error, failure... so decided to reinstall armbian by a new SD card. but tried 2 new cards with new images.. i got same error ... as attached log file. it seems during booting the kernel, not sure it is u-boot or kernel report it cannot find the root file system. i am not sure it is the SD card issue or it it the Helios4 board issue or any other issue. could anyone help? bootlog.txt

• 0

  Reputation Points

• 2 replies
• 2.5k views

heliosFR

January 11, 20251 yr

I've flashed: Armbian_25.2.0-trunk.193_Odroidxu4_trixie_current_6.6.65_minimal.img to my eMMC. It boots fine, but after a "armbian-upgrade" it will give a kernel panic upon reboot. I think the new kernel is borked.

• 0

  Reputation Points

• 5 replies
• 5.7k views
• 1 follower

MichaIng

January 9, 20251 yr

After installing armbian bookworm the fans are always at maximum. Here is how I solved. Trying to figure out what is not working I try to run the related service systemctl start fancontrol.service but it does not start. So I check the latest errors: systemctl status fancontrol.service I obtain Failed ...fancontrol.service: Failed to locate executable /usr/sbin/fancontrol so, fancontrol is simply not there and apt can't find it for installation. I took the old sd card and copied the fancontrol to /usr/sbin/ Than make it executable with: chmod +x /usr/sbin/fancontrol than systemctl start fancontrol.service systemc…

• 0

  Reputation Points

• 3 replies
• 4.7k views
• 1 follower

9a3eedi

December 22, 20241 yr

I used the Armbian 24.11.1 Bookworm Minimal / IOT Image from https://www.armbian.com/odroid-xu4/. When i checked the boot messages with journalctl -b, then i can see the message -> "system vulnerable" Later i can read the message "Spectre BHB: enabling loop workaround for all CPUs". Is this a fix for the first warning message, or is my system vulnerable? Dec 16 20:32:58 odroidxu4 kernel: smp: Bringing up secondary CPUs ... Dec 16 20:32:58 odroidxu4 kernel: CPU1: thread -1, cpu 1, socket 1, mpidr 80000101 Dec 16 20:32:58 odroidxu4 kernel: CPU2: thread -1, cpu 2, socket 1, mpidr 80000102 Dec 16 20:32:58 odroidxu4 kernel: CPU3: thread -1, cpu 3, …

• 0

  Reputation Points

• 3 replies
• 3k views
• 2 followers

Werner

December 18, 20241 yr

Hello, I have been struggling with this for a while, found some replies on the other communities but I simply cannot get Wireguard up and running on my Odroid HC2 with Armbian. Running... echo "deb http://deb.debian.org/debian/ unstable main" > /etc/apt/sources.list.d/unstable-wireguard.list printf 'Package: *\nPin: release a=unstable\nPin-Priority: 90\n' > /etc/apt/preferences.d/limit-unstable apt update apt install -y linux-headers-odroidxu4 wireguard yields... Loading new wireguard-0.0.20181218 DKMS files... dpkg: warning: version '3.10.106-odroidxu4 4.19.14' has bad syntax: invalid character in revision number Building f…

• 1

  Reputation Points

• 51 replies
• 35k views
• 2 followers

SteeMan

November 29, 20241 yr

I wanted to try Armbian on a Raspberry Pi-5 with a Radxa penta SATA hat. Installed: Armbian_community_25.2.0-trunk.86_Rpi5b_bookworm_current_6.6.63_minimal.img The SATA hat is not detected: root@rpi5b:~# lspci 00:00.0 PCI bridge: Broadcom Inc. and subsidiaries BCM2712 PCIe Bridge (rev 21) 01:00.0 Ethernet controller: Raspberry Pi Ltd RP1 PCIe 2.0 South Bridge I would expect this: root@raspi:~# lspci 0000:00:00.0 PCI bridge: Broadcom Inc. and subsidiaries BCM2712 PCIe Bridge (rev 21) 0000:01:00.0 SATA controller: JMicron Technology Corp. JMB58x AHCI SATA controller 0001:00:00.0 PCI bridge: Broadcom Inc. and subsidiaries BCM2712 PCIe Bridge (r…

• 0

  Reputation Points

• 0 replies
• 3.6k views

ChrisO

November 26, 20241 yr

Hi, I'm running Armbian UEFI x86 on a Radxa Rock X4 and I'm struggling to find, where to put the kernel parameters. The armbian-config SY003 suggests /boot/armbianEnv.txt. So I've put a line with extraargs=, but it is ignored. Then I've tried /etc/default/grub adding the parameters to GRUB_CMDLINE_LINUX_DEFAULT= and then doing update-grub, but it is also ignored. Where should I put the kernel parameters?

• 0

  Reputation Points

• 3 replies
• 3.4k views

fik

November 25, 20241 yr

Hello, I would like to sell my helios4 2gb ecc. It's served me well, I've outgrown it and is no longer required Posting on here incase anyone is interested Fyi, I'm UK based for postage

• 0

  Reputation Points

• 0 replies
• 1.7k views
• 1 follower

Declan

November 10, 20241 yr

[ 2.336390] ------------[ cut here ]------------ [ 2.336395] WARNING: CPU: 1 PID: 317 at drivers/net/wireless/rtl8812au/core/rtw_odm.c:62 rtw_odm_init_ic_type+0x64/0x88 [88XXau] [ 2.336482] Modules linked in: rpivid_hevc(C) drm_kms_helper brcmfmac 88XXau(+) hci_uart pisp_be brcmutil btbcm snd_soc_core v4l2_mem2mem bluetooth cfg80211 videobuf2_dma_contig snd_compress videobuf2_memops snd_pcm_dmaengine ecdh_generic videobuf2_v4l2 snd_pcm rfkill videodev snd_timer ecc snd videobuf2_common v3d mc dw_axi_dmac_platform raspberrypi_hwmon gpu_sched pwm_brcmstb rp1_adc aes_ce_blk pwm_rp1 drm_shmem_helper aes_ce_cipher polyval_ce polyval_generic ghash_ce sha2_ce sha256_arm…

• 0

  Reputation Points

• 1 reply
• 3.2k views

c0rnelius

November 7, 20241 yr

After upgrade to version 5.15.72, fancontrol service fails to start, due to missing /dev/fan-j17 There is some information in dmesg: pwm-fan j17-pwm: error -EBUSY: Could not get PWM

• 1

  Reputation Points

• 28 replies
• 10.3k views
• 3 followers

alchemist

October 15, 20241 yr

Hello community! I have performed an update from armbian 11 to 12 and OMV 6 to 7 and completed it successfully so far. Unfortunately just the package armbian-bsp-cli-odroidxu4 was not upgraded due to a missing dependency: +++ The following packages have unmet dependencies: armbian-bsp-cli-odroidxu4-current : Depends: base-files (>= 24.5.1) but 12.4+deb12u6 is to be installed E: Unable to correct problems, you have held broken packages. root@omv:~# sudo apt install 12.4+deb12u6 Reading package lists... Done Building dependency tree... Done Reading state information... Done E: Unable to locate package 12.4+deb1…

• 1

  Reputation Points

• 17 replies
• 8.5k views
• 3 followers

Igor

September 23, 20242 yr

Hi everyone. Just after a bit of advice before I take the plunge and boot up armbian on my Mi10 Pro. I'm using it currently as a modem, it's tethered to my Deco setup so its only used as a modem. Obviously the stock HyperOS isn't that great at having anything that is remotely useful for this purposes. So I'm hoping that Armbian could be the answer I'm looking for. If someone could assist/answer the following; Is there by modem/router type software that I can use on Armbian? Does the 5g modem get recognised by Armbian? Does the USB C slot get recognised so any usb hub that I plug in will work? Will ethernet teth…

• 0

  Reputation Points

• 1 reply
• 2.6k views
• 1 follower

Igor

September 15, 20242 yr

Hello all! After upgrading to OMV 7 and Debian 12 my OLED display remains dark. I am using Kobol Helios 4 NAS. Can anyone tell me where the problem is? When i try to execute git clone https://github.com/kobol-io/sys-oled.git cd sys-oled sudo ./install.sh I get the following error message via SSH. Installing luma.oled library error: externally-managed-environment × This environment is externally managed ╰─> To install Python packages system-wide, try apt install python3-xyz, where xyz is the package you are trying to install. If you wish to install a non-Debian-packaged Python package, create a virtual environment using python3 -m ve…

• 0

  Reputation Points

• 2 replies
• 3.3k views

Tearran

August 31, 20242 yr

Today I imaged 'Armbian_24.8.0-trunk.542_Rpi4b_noble_current_6.6.44_gnome_desktop.img' on to an SD card and then put it in my Raspberry Pi 4 GB. It booted up first time no issues and I went through the setup flow. I am using wired ethernet and was able to reach it remotely immediately. I installed all the updates. When I do "sudo shutdown -h -r now" on the command line (either via SSH or locally in the terminal) it does not reboot. The device stops responding to pings and no longer has HDMI output. If I power cycle the board once, it does not boot up. On the second power cycle it boots up. This seems really odd. Is this some known issue with the raspberry pi 4…

• 0

  Reputation Points

• 1 reply
• 3k views
• 1 follower

Werner

August 11, 20242 yr

I have a `.dts` file built on Raspberry Pi OS for Raspberry Pi 5, that has following section allowing to provide options to both userspace `dtoverlay` and as parameters in `/boot/firmware/config.txt`: __overrides__ { rotation = <&cam_node>,"rotation:0"; orientation = <&cam_node>,"orientation:0"; media-controller = <&csi>,"brcm,media-controller?"; cam0 = <&i2c_frag>, "target:0=",<&i2c_csi_dsi0>, <&csi_frag>, "target:0=",<&csi0>, <&cam_node>, "VIN-supply:0=",<&cam0_reg>; }; Then following use: sudo dtoverlay -v ovaone cam0=on Overrides proper…

• 0

  Reputation Points

• 2 replies
• 3k views
• 1 follower

Michał Fita

August 6, 20242 yr

I am running the current version of Armbian (and Open Media Vault) on a Raspberry Pi 5. Attached to it is a 2.5GB Ethernet adapter - this one in particular: https://www.amazon.ca/dp/B0CD1FDKT1 It lists as having a speed of 2500Mb/s but doesn't in practice: sudo ethtool enx6c1ff7045a00 Settings for enx6c1ff7045a00: Supported ports: [ TP MII ] Supported link modes: 10baseT/Half 10baseT/Full 100baseT/Half 100baseT/Full 1000baseT/Half 1000baseT/Full 2500baseT/Full Supported pause frame use: No …

• 0

  Reputation Points

• 0 replies
• 4.5k views

Rob Latour

August 1, 20242 yr

Hi, New user here - I Just download the current version of Armbian today with the hopes of using it on my Raspberry Pi 5B. After unzipping it, I created an image on a usb stick using Raspberry Pi Imager - use custom. However, it is not booting. It only shows a few lines on the screen, the last being: Begin: Running /scripts/local-block ... done. (screen shot below) What am I doing wrong?

• 0

  Reputation Points

• 11 replies
• 8.8k views

Rob Latour

July 16, 20242 yr

I've got an NVME SSD formated to 4Kn block size which means `dd`ing the .img file to the drive isn't going to work. Is there a recommended way to install Armbian in this situation?

• 0

  Reputation Points

• 2 replies
• 2.2k views
• 1 follower

trapexit

July 12, 20242 yr

Hello all, I am using Armbian (Debian Bookworm), Gnome with Wayland. everything is working just fine. The problem is with sharing or presenting screen with OBS-Studio, Jitsi, Google meeting or other. If I share a tab in Chromium/Firefox with Jtisi or Google meeting, that's work, but I can't share a window or full screen. I am wondering what is the main cost of that. This when I share full screen, it doesn't work properly, it shows like this: This when I share tab, it's working just fine.

• 1

  Reputation Points

• 3 replies
• 3.7k views

Sally

July 8, 20242 yr

Today, I set up SSH public key authentication on my RPI5B running Armbian-unofficial 24.8.0-trunk Bookworm. During the test, I noticed that the initial SSH session message displayed the CPU temperature and other details. Unfortunately, the vcgencmd utility provided by the Raspberry Pi Foundation doesn't work on Armbian. I'm looking to understand how the temperature, CPU clock, and GPU clock are measured, and if possible, I'd like to receive some code to do so.

• 1

  Reputation Points

• 1 reply
• 5.3k views
• 1 follower

otalado

June 30, 20242 yr

BPI-F3 Introduction For this device, we can make an image using the Source Code: BananaPi_BPI-F3#_development Let's try to add support to the Armbian build system.

• 1

  Reputation Points

• 3 replies
• 3k views

Lion Wang

June 24, 20242 yr

I need squashfs for snap, but it seems it's not there. I tried installing libsquashfs-dev, libsquashfs1, libsquashfuse0, squashfs-tools, squashfuse, but no improvement Tips how to solve this? sander@bananapif3:~$ sudo modprobe squashfs modprobe: FATAL: Module squashfs not found in directory /lib/modules/6.1.15-legacy-k1 sander@bananapif3:~$ lsb_release -a No LSB modules are available. Distributor ID: Ubuntu Description: Armbian-bpi-SpacemiT 24.5.0-trunk noble Release: 24.04 Codename: noble sander@bananapif3:~$ apt list --installed | grep -i squashfs WARNING: apt does not have a stable CLI interface. Use wit…

• 0

  Reputation Points

• 1 reply
• 2.8k views
• 1 follower

Superkoning

June 23, 20242 yr

Reverting "linux-firmware-raspi" from "12-0ubuntu1" to "10-0ubuntu1" resolves this issue.

• 0

  Reputation Points

• 1 reply
• 5.2k views
• 1 follower

DeMiNe0

June 22, 20242 yr

Hi, I'm running OMV on Odroid HC2. I updated to OMV 7.7.1. Armbian to 24.5.1 with Linux kernel 6.6.31-current-odroid-xu4. After reboot the server started to act very slow. I tried to reapply the DBT for HC1/2 via armbian-config but this did not help. armbian-config says I'm on ondemand governor between 200-200 MHz. What could be the issue? Actually my system says I should run dpkg --configure -a but this command hang here and the system reboots after few seconds... steakhutzeee@dk:~$ sudo dpkg --configure -a [sudo] password for steakhutzeee: Setting up containerd.io (1.6.33-1) ... …

• 0

  Reputation Points

• 10 replies
• 7.6k views
• 1 follower

hmof

June 18, 20242 yr

Hi The problem with Odroid HC1 is that BIG cores cannot go higher than 1.50Ghz and LITTLE cores cannot go higher than 900Mhz! Why is the CPU so throttled now? This sbc can and could work at higher clock speeds without any problems. Forcing 2Ghz and 1.50Ghz via cpupower does not help... Bullseye A 23.8.27 K 6.6.31

• 1

  Reputation Points

• 2 replies
• 2.5k views
• 1 follower

jshc1

June 4, 20242 yr

Hi All, I wanted to add some dtoverlay lines to the pi's config.txt which was in /boot/firmware/config.txt and I notice the folder is empty ? WTF the pi is running ok - how can this be ?

• 0

  Reputation Points

• 2 replies
• 5.3k views
• 1 follower

pkfox

May 16, 20242 yr

My system has `linux-image-current-bcm2712` package installed with version 24.2.5 which I believe is the current Arbian release. I installed `linux-headers-current-bcm2712`, but this package has version 24.2.1. So I end up with system running `6.6.23-current-bcm2712` with headers for `6.6.18-current-bcm2712` and I can't build extra drivers in result. Any hints? I love technical forums that don't understand markdown, it makes life so much easier...

• 1

  Reputation Points

• 11 replies
• 5.5k views

Hank Barta

May 9, 20242 yr

Hi. I installed Armbian on a raspberry pi 5. Everything went smoothly, but straight-away, I see that dmesg is filled with this error: brcmfmac: brcmf_set_channel: set chanspec 0x100c fail, reason -52 I'm noticing some inconsistencies on the network, and I'm not sure if this is behind it. I tried installing the firmware-brcm80211, but it didn't help -- in fact, I think it might have made it worse. I've looked all over, but I cannot see any useful information regarding this. It has no usb devices attached, not using and gpio pins or anything fancy. It is just a node on the network that is presenting information on a televis…

• 0

  Reputation Points

• 3 replies
• 4.4k views

c0rnelius

May 7, 20242 yr

... however Armbian_23.8.1_Helios4_bookworm_current_6.1.50.img.xz worked well and was then upgraded through apt to 24.2.1 / 6.6.16. I was then able to install OMV 7, Plex media server and Transmission on top. warning - the ethernet ports change, breaking scripts where they're hardcoded, e.g the wol service. changing the port in two places in the file and running systemctl daemon-reload ; systemctl restart helios4-wol seems to be running ok. This details the patch: diff --git a/lib/systemd/system/helios4-wol.service.orig b/lib/systemd/system/helios4-wol.service index 965eb74..451b857 100644 --- a/lib/systemd/system/helios4-wol.servic…

• 0

  Reputation Points

• 0 replies
• 2.2k views
• 1 follower

tamsoftware

May 7, 20242 yr

Raspberry OS has weird quirks that automate the process of setting up the system for using cameras, but I'm looking for clean way to set up the device tree to use the imx219 camera. Anyone knows what overlays to enable to get this to work on Armbian? Additionally where's the location of device tree overlays sources for Raspberry Pi 5 on Armbian?

• 0

  Reputation Points

• 5 replies
• 9k views
• 1 follower

c0rnelius

May 7, 20242 yr

Hi team, just wanted to know how come this was not included in this release and could someone provide the details to download the most stable version of Chrominum for this please ?

• 0

  Reputation Points

• 1 reply
• 2.2k views
• 1 follower

Igor

May 3, 20242 yr

I have a RasPi 4b, I'm trying to understand how the device tree is modified so I can use the methodology eventually for a board that has a CM4 on it. So from a virgin clone of the build repo: ./compile.sh BOARD=rpi4b BRANCH=edge RELEASE=bookworm BUILD_MINIMAL=yes KERNEL_CONFIGURE=no KERNEL_GIT=full install image on SD card and boot the device, go through Armbian-setup. All well and good, then varify device tree used for the boot: cat /proc/device-tree/model gets me a: Raspberry Pi 4 Model B Rev 1.5 OK so now lets modify the device tree: ./compile.sh BOARD=rpi4b BRANCH=edge RELEASE=bookworm BUILD_MINIMAL=yes KERNEL_CONFIGURE=n…

• 0

  Reputation Points

• 1 reply
• 3.5k views

anthony winner

April 17, 20242 yr

Hi friends, I use armbian for long time, but these days I change my borad to RaspberryPi 4B. However I can not get kernel startup serial output from RPI as usual on the board. Does anyone has more information about that? What I want to do is a atonomy driving experiment environment. And I don't have monitor or keyboard attach to it. I will patch preempt_RT to get the RT linux kernel, so it's difficult for me to pull the RPI out of the test bench everytime and put back after setting the ssh or something everytime I flash new kernel or image. The armbian version I use is Armbian_23.11.1_Rpi4b_jammy_current_6.1.…

• 1

  Reputation Points

• 2 replies
• 3.2k views
• 1 follower

He Qichen

April 3, 20242 yr

Hi All, as all my other boards run armbian I thought it only right that my raspberry 4b should run it, has anyone here successfuly installed Armbian on one ? I don't want to use Bookworm as it has Audio problems - my main use of the pi is to host Logitech media server running squeezelite TIA

• 0

  Reputation Points

• 0 replies
• 2k views
• 1 follower

pkfox

April 1, 20242 yr

Hello @Igor I have installed Armbian 24.2.4 Jammy Kde-neon Kernel: 6.6.21, Size: 1.9GB, Release date: Mar 12, 2024 on a mini pc J4125 Celeron based. What I noticed that is during initial boot, when finds the timezone and asks to accept or select a diff one, i tried 2 times. I selected accept and then took minuted to complete and enter the desktop First time I killed it and second clean i waited.:-) I checked in armbian-config the locales and noticed that ALL options were checked. Which makes sense why I waited so long If this a know bug or needs to be fixed? Just wanted to bring to your attention. Rest …

• 0

  Reputation Points

• 1 reply
• 3.1k views
• 1 follower

2play

March 27, 20242 yr

I have tried all known possible combos to hide the grub menu on boot but no luck I tested on the /etc/default/grub and /etc/default/grub.d/98-armbian.cfg Is there another config file Im missing that ignores above, especially later? Tried also with custom override config at boot. Any advise is welcome

• 0

  Reputation Points

• 2 replies
• 2.8k views
• 1 follower

2play

March 20, 20242 yr

I have a 32-bit Celeron notebook with 1Gb RAM. It boots only from DVD. Will it work with Armbian? Thanks.

• 0

  Reputation Points

• 7 replies
• 7.2k views

krrmbn

March 18, 20242 yr

When I run the Linux kernel on the Odroid XU4 board, it enters a loop with this error during boot: U-Boot 2017.05-00008-g6a9ddb8303-dirty (May 19 2020 - 19:48:01 +0900) for ODROID-XU4 CPU: Exynos5422 @ 800 MHz Model: Odroid XU4 based on EXYNOS5422 Board: Odroid XU4 based on EXYNOS5422 Type: xu4 DRAM: 2 GiB MMC: EXYNOS DWMMC: 0, EXYNOS DWMMC: 1 MMC Device 0 ( SD ): 29.7 GiB mmc_init: -5, time 4 *** Warning - bad CRC, using default environment In: serial Out: serial Err: serial Net: No ethernet found. Press quickly 'Enter' twice to stop autoboot: 0 reading /boot.ini 2401 bytes read in 4 ms (585.9 KiB/s) ## Executing script at 43e00000 reading config.ini…

• 0

  Reputation Points

• 1 reply
• 5.8k views

SteeMan

March 13, 20242 yr

Searches suggest a USB reset script will fix but that says nothing found. It comes up after unplugging and replugging the dongle. Already configured with "nmcli c add type ethernet ifname enx00e04c68080d con-name HiQSDR autoconnect yes save yes ip4 192.168.2.196/24" After boot, nothing in lsusb for it and dmesg -T does not show it. Bus 001 Device 014: ID 0bda:8152 Realtek Semiconductor Corp. RTL8152 Fast Ethernet Adapter Things tried:- root@rpi4b:~# cat /etc/os-release PRETTY_NAME="Armbian 24.2.1 jammy" NAME="Ubuntu" VERSION_ID="22.04" VERSION="22.04.3 LTS (Jammy Jellyfish)" VERSION_CODENAME=jammy ID=ubuntu ID_LIKE=debia…

• 0

  Reputation Points

• 1 reply
• 3.3k views
• 1 follower

Werner

February 26, 20242 yr

Hi community, Context I build my own custom Arabian image on arm 32bit (prod), and experimenting running the following armbian image configuration on Qemu with console/serial only support for uefi-x86 and uefi-arm64 boards to speed up development/test. Problem I stumble upon something odd: both "uefi-*" boards are configured to only run GRUB in gfxterm mode ONLY. BOARD: uefi-86 -> BOARDFAMILY="uefi-x86". -> UEFI_GRUB_TERMINAL="gfxterm" [0] BOARD: uefi-arm64 -> BOARDFAMILY="uefi-arm64". -> UEFI_GRUB_TERMINAL="gfxterm" [1] [0] https://github.com/armbian/build/blob/2afd8fe9bb…

• 0

  Reputation Points

• 2 replies
• 3.2k views
• 1 follower

David A

February 26, 20242 yr

I am unable to see how to setup the Pimoroni NVME base for the Raspberry PI 5 with Armbian 23.11.3. Are there published instructions? Is this supported?

• 0

  Reputation Points

• 0 replies
• 1.8k views
• 1 follower

Andro

February 24, 20242 yr

Hello, Is anybody able to install and install Armbian bookworm on Proxmox (OVMF uefi, Q35)? I tried multiple times but proxmox doesn't recognize the UEFI partition and I can only boot from the USB... Debian boots fine tho.

• 0

  Reputation Points

• 0 replies
• 4.5k views

Unicorn9x

February 16, 20242 yr

I installed Armbian from Armbian_23.11.3_Rpi5b_jammy_current_6.1.68_cinnamon_desktop.img.xz downloaded today (February 11th 24) After installation, I performed an upgrade/update. I have not yet installed any additional software. Issues; 1) when cinnamon desktop starts there is message displayed: Your system is currently running without video hardware acceleration 2) vgencmd always gives an error: VCHI initialization failed, no matter if I run it with sudo or not, or with which parameter(s) I run it. armbian monitor -u gave link https://paste.armbian.com/lurunopoyo

• 0

  Reputation Points

• 5 replies
• 6.9k views
• 1 follower

Igor

February 12, 20242 yr

Hello, I wanna test Armbian x86 on virtual machine. Is possible to convert its img file to some format (vdi or vmdk) and boot on Virtualbox? I made a attempt but it wont boot.. VBoxManage.exe convertfromraw --format VDI armbian.img ambian.vdi Thx a lot

• 1

  Reputation Points

• 7 replies
• 8.3k views
• 2 followers

BOFFBOY

February 12, 20242 yr

Hi, where can I find kernel headers for RPi5 jammy? linux-headers-6.1.68.current-bcm2712 ? This version of Armbian is really usefull because it is the only one that can run a version of ROS natively on a RPi5, but I need the headers to build drivers Thanks

• 1

  Reputation Points

• 10 replies
• 13.4k views

J.Ayuso

February 2, 20242 yr

Hello, I use an Odroid XU with Armbian and Webmin as a NAS drive. I have 6 hard drives (GPT format) connected. Under an old Linux version I was able to put the hard drives into standby with /etc/ rc.local (hdparm -S). Since I started running the system with Armbian, standby no longer works. A query via hdparm says "Standby", but the disks are still spinning. Am I fundamentally doing something wrong? Thank you!

• 1

  Reputation Points

• 6 replies
• 3.8k views

pinie_pinie

January 26, 20242 yr

I had to roll back and use apt hold on the 2 corresponding packages to remain on the "good" LTS kernel 5.4.253 that supports fstrim on extremely popular Crucial SSDs that support it. It's impossible to get the maintainer Joe to reply. Is there a triage way to have someone contact him and make him aware of this issue? I have zero complaints about his work, but SATA TRIM commands are a must have on SBCs that have drive bays. It dramatically increases lifetime of NAND based storage devices. Please tell me what to do. I found filing a simple bug report would be counter productive as I want to investigate why later Kernels are either compiled without …

• 0

  Reputation Points

• 4 replies
• 3.5k views

belegdol

January 17, 20242 yr

I'm trying to get to the point where I can read time from the DS3231 RTC module on a Raspberry Pi 4. From what I understand, I first need to activate i2c bus, then load the kernel module that would work with the clock itself. So far i2cdetect tool fails to detect anything. There are no i2c-* devices in /dev either. I've read about "Hardware" option in armbian-config, but it's not showing up in the menu. I've also read that it's a matter of adding a device tree overlay. Does that apply for RPI4? The folder structure in /boot seems different from what documentation and several threads describe for other boards. What would be the steps for acti…

• 0

  Reputation Points

• 2 replies
• 4.8k views

check

January 13, 20242 yr

I just installed latest Jammy on XU-4 and it was running fine off SD. Then I did nand-sata-install and you can see below what happened. This used to work fine with older versions. sudo hdparm -Tt /dev/sda /dev/sda: Timing cached reads: 2 MB in 5.54 seconds = 369.48 kB/sec Timing buffered disk reads: 2 MB in 10.33 seconds = 198.19 kB/sec

• 0

  Reputation Points

• 4 replies
• 3k views
• 1 follower

sgjava

December 27, 20232 yr

I already posted the question in the Odroid forum. I decided to post it here too since it may be more inherent to the Armbian OS. I used both Armbian_23.02.3_Odroidxu4_bullseye_current_5.4.239.img from the odroidxu4 archive and Armbian-unofficial_23.11.0-trunk_Odroidxu4_bullseye_current_6.1.63 generated from the Armbian build script. (Base CLI Image). After flashing the former image and then installing OMV6, this is the output that OMV6 gives me when installing the openmediavault-wireguard plugin: Spoiler Reading package lists... Building dependency tree... Reading state information... The following additional packages will be in…

• 0

  Reputation Points

• 2 replies
• 4.5k views
• 1 follower

cidra

November 30, 20232 yr

Seeing the SOC go upto 80-90C, is there any fan mod or way to reduce temps? for now, added a external fan, removed the case, temps are around 50 Running OMV6 on bullseye

• 0

  Reputation Points

• 2 replies
• 2.8k views

Heisath

November 2, 20232 yr

Hi there, not sure where to post this, intended for @rpardini I have an x13s running here with dual boot to win11 and ubuntu 23.04 lunar, the armbian work was a great help to get it to work. Not quite finished setting it up tbqh. However, if you're on a fast boot device like the local NVMe drive, the remoteproc firmwares qcadsp8280.mbn and qccdsp8280.mbn fail to load and won't get retried later, the GPU firmwares a660_sqe.fw and a660_gmu.bin may fail but get loaded later. That is a little unfortunate, since PMIC GLINK (among other things) is running on one of these. My Windows Dev Kit 2023 (same SoC) doesn't balk this way, both boot the same Ubuntu…

• 1

  Reputation Points

• 7 replies
• 5.9k views
• 1 follower

jglathe

October 27, 20232 yr

On a fresh armbian bullseye debian install on an odroidhc2, the only change is I installed NCP through armbian softy and a reboot. My sudo account works, but if I try to sign into root it says account unavailable. How can I fix this?

• 0

  Reputation Points

• 0 replies
• 1.9k views
• 1 follower

slatko

October 23, 20232 yr

I was curious if anyone has experience with using Armbian on older x86 server hardware systems. This would be for a home-lab sort of setup. In the past, I fought with Ubuntu Server and found that I missed the Armbian-Config utility that made setup a breeze. (Specifically looking at WIWYNN LYRA-M SV315, INTEL XEON E5-2670 V2 SR1A7 2.5GHZ 10-C0RE) I am planning to run a MariaDB instance for a scientific database. My past test use was using Armbian on an 8 GB Raspberry pi 4B, with MariaDB, and it worked very well, until the SD card failed. Any thoughts or points of caution before attempting this would be appreciated. I have generally had a very p…

• 0

  Reputation Points

• 6 replies
• 9.5k views
• 1 follower

Igor

October 15, 20232 yr

I am using an odroid HC2 as home NAS for some years now. Software is armbian/XU4 in debian flavour. At the moment I am running bookworm (which was updated from buster to bullseye and then to bookworm - I know its not supported but it worked fine. And the problem described here started only some month after the last update). Some days ago I wanted to reboot the unit but it was stuck in the boot process. Not available by ssh or any other services. I then found out that the boot stopped because my hard disk could not be mounted from ftsab (while the sd card as root file system could be mounted). After commenting out the line it boots normally. And when logged in by ssh …

• 0

  Reputation Points

• 0 replies
• 2.7k views
• 1 follower

jba

October 4, 20233 yr

https://www.microsoft.com/en-us/d/windows-dev-kit-2023/94k0p67w7581 UEFI can be way how to boot it maybe

• 1

  Reputation Points

• 12 replies
• 12k views
• 1 follower

jglathe

August 28, 20233 yr

Hello, my Odroid HC2 was working flawlessly for years but since 1-2 weeks it keeps crashing/freezing and I don't know why. If I cut power and repower it, it works fine for a while but then trying to reach it via ssh, or accessing the harddrive via smb share, or opening a webinterface fails. I checked the microsd card with armbianmonitor -c "$HOME" and it showed it's fine. I can only provide the logs: https://paste.armbian.com/cibowaquyi and hope someone can check them and reply 🙏. I don't know what to look for in the logs that could be wrong... One last thing I noticed, after I ssh to it amongst other things I'm greeted with this: RX today: Erro…

• 0

  Reputation Points

• 4 replies
• 3.9k views
• 2 followers

wow64

August 15, 20233 yr

The bios boot menu will not boot at all from that USB stick, unlike from ironrobin aarch64 or ubuntu concept x13s, which do boot (and install).

• 0

  Reputation Points

• 0 replies
• 1.9k views

tja

August 12, 20233 yr

Hi All, I'm a happy user of a Helios4, and have been for several years now. However, at some point it will be challenging to continue to support it, and I'd rather be proactive about maintaining access to my data than scrambling around. Do people here have recommendations on current hardware that can replace the Helios4? It would need to meet the baseline hardware requirements of the existing hardware. Bonus points if one can re-use the laser-cut case Thanks!

• 1

  Reputation Points

• 5 replies
• 5.9k views
• 2 followers

vortex375

August 2, 20233 yr

Is there a repository with older Armbian images available? I'm looking to install OMV6 on my Odroid HC1 (XU4), when I get Armbian Bookworm installed OMV scripts says to use Buster or Bullseye, but I cannot find an Armbian Bullseye image anywhere. I'm not super proficient with Linux (I know enough to get myself in trouble) so compiling my own image is not something I think I can do. Any help would be greatly appreciated. Edit: Nevermind...I'm an idiot...didn't notice the GIANT button for Archived Images. Apologies. Thanks, Robert

• 0

  Reputation Points

• 1 reply
• 3.4k views
• 1 follower

charly_53

July 29, 20233 yr

I'm attempting an install to the eMMC on a CM4 (mounted on an Axzez Interceptor) using armbian-install. I've booted Armbian 23.5 Jammy CLI from USB, and armbian-install runs fine, (boot from eMMC, system on eMMC) After transferring the rootfs I get the "Cleaning up ... Almost done." message, and then the following: Error while creating U-Boot loader image with mkimage Error: no u-boot package found, exiting I've run a full update / upgrade and installed armbian-config with no change. What's missing here?

• 0

  Reputation Points

• 0 replies
• 3.6k views
• 1 follower

Zandr

July 21, 20233 yr

I noticed there's a community overlay module that adds a "first boot" script which, among other things, allows you to connect to wifi without ever connecting a monitor or keyboard. But, this overlap doesn't seem to come with the current raspberry pi 4b image (Armbian_23.5.1_Rpi4b_jammy_current_6.1.29.img). I tried downloading the build script, but I don't see an option to enable overlays in that either. Is this supported at this time? Also, I know I could just use raspbian if I want this feature, but I'm hoping to work with armbian because I want my build process to be reproducible on other boards.

• 0

  Reputation Points

• 0 replies
• 3k views
• 1 follower

Nycki

July 16, 20233 yr

Using release Armbian_23.5.1_Rpi4b_jammy_current_6.1.29 on a Raspberry Pi 4b. From a clean install: $ sudo apt update $ sudo apt upgrade $ sudo apt install podman $ podman run --rm docker.io/library/hello-world Error: command required for rootless mode with multiple IDs: exec: "newuidmap": executable file not found in $PATH Podman runs fine with sudo, so for now I can use that as a workaround, but it would be nice to run rootless containers for dev environments. There is a related issue on the official podman repo, but the solutions there don't seem to apply to armbian. https://github.com/containers/podman/issues/9271

• 0

  Reputation Points

• 3 replies
• 28.3k views
• 1 follower

Igor

July 14, 20233 yr

Hi all, just a quick note here that I am running 23.05 Bookworm successfully on Helios4 with ZFS. I did a clean install with a self-built image. Why the self-build? For two reasons: I wanted to have working fancontrol and that required the recent patch of @Heisath - https://github.com/armbian/build/pull/5392 I ran into an issue with not being able to install kernel headers (see below) so I needed to build an image with kernel headers built-in Build steps I wanted the release version so I did this in a clean build environment (WSL2 Ubuntu): git clone --depth=1 --branch=v23.05.2 https://github.com/armbian/build And …

• 0

  Reputation Points

• 2 replies
• 4k views
• 1 follower

FredK

July 10, 20233 yr

I'm using Armbian 23.02.2 Bullseye with Linux 5.15.93-mvebu and OMV6. I want to upgrade to Armbian 23.5.1 Bookworm with Linux 6.1.30. Up to now no upgrade is offered. If the answer to the thread title is "yes" I need help how to do the upgrade. If the answer is "no" I kindly ask for information about the reason not to be able to upgrade. By the way: Helios4 is a maintained platform, maintainer is @Heisath

• 0

  Reputation Points

• 4 replies
• 3.5k views
• 1 follower

FredK

July 4, 20233 yr

I'm using Armbian 21.08.8 (Bullseye). I want to upgrade to Armbian 22.02.1 but "apt-get update" doesn't offer anything. Reason seems to be that <mirror>/apt/dists is from Feb 1st 2022. OTOH <mirror>/dl contains the new release but "starting from scratch" (download image, write SDcard) implies that I have to rebuild my OMV6 on top of Armbian. Question: When can I expect that <mirror>/apt/dists will be refreshed? Or is there any other way to upgrade my installation?

• 0

  Reputation Points

• 16 replies
• 11.5k views
• 1 follower

rayc

June 13, 20233 yr

Greetings, As the subject says... CEC not detected in kernel, cec-client throws errors, nothing I tried worked. root@odroidxu4:~# uname -a Linux odroidxu4 5.4.239-odroidxu4 #1 SMP PREEMPT Thu Mar 16 15:52:54 UTC 2023 armv7l GNU/Linux root@odroidxu4:~# cec-client -l libCEC version: 6.0.2, compiled on Linux-4.19.0-14-armmp-lpae ... , features: P8_USB, DRM, P8_detect, randr, Exynos, Linux, AOCEC Found devices: 1 device: 1 com port: Linux vendor id: 0000 product id: 0000 firmware version: 0 type: Linux root@odroidxu4:~# cec-client No device type …

• 0

  Reputation Points

• 2 replies
• 4.4k views

Igor

May 25, 20233 yr

Hi, I want to make adc pcm1804(simple adc clock + i2s) work with odroid, and manage it by alsa. As I understand, I should add a codec for pcm1804, driver to work with alsa, and device tree overlay. Please, tell me where can I get an example of this, or at least smth to use as a reference ?

• 0

  Reputation Points

• 0 replies
• 2.2k views
• 1 follower

Григорий Селезнев

May 20, 20233 yr

HC2 here. Two last 6.1 kernels broke alsa : hw not accessible anymore. Aplay -l lists audio outputs but none may be used. Looks like an omission on kernel flags.. Reverted to Armbian Bullseye : exact same config, but working.

• 0

  Reputation Points

• 0 replies
• 2.1k views

Mascaret

May 20, 20233 yr

Where can I get the kernel headers for rpi4b for 5.15.92-bcm2711? sudo armbian-config does not get it

• 0

  Reputation Points

• 1 reply
• 3k views

Werner

May 8, 20233 yr

I've been having issues with my Helios4 becoming unresponsive when it's been up for a while. I decided to do some more thorough investigating and found that it was having problems writing to the sdcard. That led to the following entries in syslog: Dec 20 21:36:43 helios-backup kernel: [318645.034243] mmc0: Timeout waiting for hardware interrupt. Dec 20 21:36:43 helios-backup kernel: [318645.034254] mmc0: sdhci: ============ SDHCI REGISTER DUMP =========== Dec 20 21:36:43 helios-backup kernel: [318645.034258] mmc0: sdhci: Sys addr: 0x00000008 | Version: 0x00000202 Dec 20 21:36:43 helios-backup kernel: [318645.034263] mmc0: sdhci: Blk size: 0x000072…

• 0

  Reputation Points

• 2 replies
• 4.2k views

helios4noob

April 15, 20233 yr

Hello everyone! After my Helios4 had been laying in a cardboard box for a long time after moving houses, I decided it was time to once again set it up as an NAS. I was previously running Open Media Vault (OMV) with 4 disks in xfs and using MergerFS for unionizing three of them at a single mount point and then using Snapraid for the fourth disk. OMV worked pretty well for me but I go somewhat irritated from time to times because how it decides to thing in it's own way. But now I when I re-installed it (after getting a new PSU) I went with Armbian instead to keep it closer to "standard" linux. I think I will still go with Merver…

• 0

  Reputation Points

• 2 replies
• 2.7k views

helios4noob

April 15, 20233 yr

im on a fresh install of armbian cinnamon for the rpi4. i can not seem to get bluetooth working. there seems to be no bluetooth module loaded by kernel maybe? i tried to enable it using armbian-config, but it doesn't get activated by systemctl even when enabled. any ideas?

• 0

  Reputation Points

• 12 replies
• 10.3k views
• 1 follower

Matthijs Kooijman

April 10, 20233 yr

Hi, I've several Odroid HC1 boards (forming a kubernetes cluster of 8 nodes) currently running Armbian Buster Minimal image. I would like to upgrade the cluster (node by node) to Armbian Bullseye Minimal but I faced the following issue when I tried to reinstall the 1st node: - Used image: https://mirrors.dotsrc.org/armbian-dl/odroidxu4/archive/Armbian_23.02.1_Odroidxu4_bullseye_current_5.4.232_minimal.img.xz - Image flashed on SD card using BalenaEtcher - SD card plugged into the board + power up --> the OS is not booting (and not answering to ping) Here are the different tries I did: - I've tried to flash the image several t…

• 1

  Reputation Points

• 4 replies
• 3.9k views
• 1 follower

grunlab

April 9, 20233 yr

The `hardware` menu is missing on the current build - so been trying to manually install spidev module. I did add the following lines to armbianEnv.txt but I don't see anything yet in /dev/spi* overlays=spi-spidev param_spidev_spi_bus=0

• 0

  Reputation Points

• 2 replies
• 2.8k views
• 1 follower

Igor

March 21, 20233 yr

hello i am new user of armbian and i really like it. so i am experimenting with it a little. yesterday i successfully installed armbian on one of my old laptops in the lab (Armbian Bullseye with XFCE desktop with kernel 5.15.y released on feb 27, 2023), so currently it boots from internal hard drive. today i wanted to try another image, so i wanted to do the same thing: 1. boot from USB key 2. download the new image on USB key 3. run xzcat armbian.img.xz | dd of=/dev/sda status=progress 4. reboot laptop (to new system) but the step 1 failed - instead of booting the system from USB key (yes - i selected the USB key on lap…

• 0

  Reputation Points

• 3 replies
• 5k views

bletvaska

March 9, 20233 yr

Is it possible to install the x86 version in the RockPIX emmc? The nand-sata-install command doesn't solve it. Thank you

• 0

  Reputation Points

• 3 replies
• 5.3k views

Igor

March 9, 20233 yr

Hello all, according to the hints on the ARMBIAN homepage the image "Armbian_23.02.0-trunk_Rpi4b_lunar_edge_6.1.5.img" should work with the Raspi 3. Unfortunately it does not work properly, the system does not want to boot with it.... The name of the image says that it was generated for Raspi4, but -as I said- the homepage says that this image would also be compatible for the other Raspberry systems mentioned there. Can anyone tell me what the reason could be, because I would love to use this ingenious image for the Raspi 3. Best regards from Berlin Z. Matthias

• 1

  Reputation Points

• 6 replies
• 4.4k views
• 1 follower

Igor

February 27, 20233 yr

Hello all, As I have often said, I am very satisfied with this LINUX implementation on the RASPI PI4 board. In the meantime, I noticed one small thing and that was somehow related to the 4GB version of my RASPI. I often had to record a KERNEL crash here; this did not happen under the 8GB version until now. But now to my actual question: How can I activate the CAMERA port under this Linux version so that I can connect a camera there? Best regards Z. Matthias

• 0

  Reputation Points

• 0 replies
• 2.2k views

Zhexue.

February 26, 20233 yr

Hello all, This seems to be an issue related to the python script to start the program, any help will be appreciated for those with python programming understanding: $ sudo systemctl status sys-oled.service * sys-oled.service - System Starting on OLED Display Loaded: loaded (/etc/systemd/system/sys-oled.service; enabled; vendor preset: enabled) Active: failed (Result: exit-code) since Fri 2021-09-17 02:22:42 JST; 10s ago Process: 4425 ExecStart=/usr/bin/python3 /usr/local/bin/sys-oled --display ${display_model} (code=exited, status=1/FAILURE) Main PID: 4425 (code=exited, status=1/FAILURE) Sep 17 02:22:42 nas python3[4425]: main() Sep 17 02:22:…

• 0

  Reputation Points

• 3 replies
• 3.6k views

quincybatten

February 13, 20233 yr

Hello all, I have installed the image "Armbian 23.02.0-trunk.0176 Lunar with bleeding edge Linux 6.1.6-bcm2711" on my two Raspi 4 systems. One system runs via cable and the other via WLAN. At the beginning there were some problems with the IPv6 - kernel, if "apt update" was executed. I got this problem under control with "disable ipv6".... Since then, both systems run flawlessly & without problems. With the implementation of GPIO you should fall back on an existing GPIO - version, which works in any case also under this image; also for 64bit. One small thing I would like to know very much, because on the system with the cable the…

• 0

  Reputation Points

• 1 reply
• 3k views
• 1 follower

wulfy23

February 10, 20233 yr

Hello everybody. I've faced the issue: Armbian_22.08.7 official image (Armbian_22.08.1_Rpi4b_jammy_current_5.15.61.img) failed to boot on RPi3B plus. The same image boots fine on RPi 4B Could not get serial console output (output is empty) Older official image Armbian_22.08.1_Rpi4b_jammy_current_5.15.61.img boots on Rpi3B plus just fine. As I've found out the reason is incorrect boot partition type set for the image. Armbian_22.08.1 (boots fine) boot partition type is "c" (W95 FAT32 LBA) Armbian_22.08.7 (doesn't boot) boot partition type is "ef" (EFI) After manually changing boot partiton type to "c" (W95 FAT32 L…

• 0

  Reputation Points

• 4 replies
• 5k views

Dave

February 9, 20233 yr

Unable to start docker after update, due to apparmor I used armbian-config's "edit boot-enviroment", added "extraargs=apparmor=0" and after a reboot I still get: docker start portainer Error response from daemon: AppArmor enabled on system but the docker-default profile could not be loaded: running `apparmor_parser apparmor_parser --version` failed with output: error: exec: "apparmor_parser": executable file not found in $PATH Error: failed to start containers: portainer armbianmonitor: https://paste.armbian.com/ebuburoxeh

• 0

  Reputation Points

• 3 replies
• 7.6k views
• 2 followers

tordenflesk

February 6, 20233 yr

Hi there, I'd like to understand the best way to handle updates on Armbian… My OS is: odroid ) uname -a Linux odroidxu4 5.4.225-odroidxu4 #22.11.1 SMP PREEMPT Wed Nov 30 10:55:16 UTC 2022 armv7l GNU/Linux odroid ) lsb_release -a No LSB modules are available. Distributor ID: Debian Description: Debian GNU/Linux 11 (bullseye) Release: 11 Codename: bullseye And APT says: The following packages have been kept back: linux-dtb-current-odroidxu4 linux-headers-current-odroidxu4 linux-image-current-odroidxu4 linux-u-boot-odroidxu4-current The habits tell me to update however the experience taught that I could breaking somethin…

• 1

  Reputation Points

• 2 replies
• 3.7k views
• 1 follower

freezr

February 6, 20233 yr

After upgrading to the 5.15 kernel, I noticed that the fan control is only able to control one of the fans, while the other spins at full speed. Experimentally I found out that the PWM control for the second fan is ineffective: helios4# uname -r 5.15.86-mvebu helios4# echo 0 > /dev/fan-j10/pwm1 # works, fan is off helios4# echo 255 > /dev/fan-j10/pwm1 # works, fan at full speed helios4# echo 0 > /dev/fan-j17/pwm1 # does nothing, full speed helios4# echo 255 > /dev/fan-j17/pwm1 # does nothing, full speed Some digging around I found that 92-mvebu-gpio-remove-hardcoded-timer-assignment.patch has been ported to 5.15, but it doesn't seem to w…

• 0

  Reputation Points

• 6 replies
• 3.9k views

lexming

January 28, 20233 yr

Hi, A strange error appeared with the last kernel update on an Odroid HC2. From the home in the terminal displays this error under RX totay: RX today: Error: Interface "--oneline" not found in database. The board is hosting an OMV instance under Armbian Bullseye Linux version 5.4.212-odroidxu4. Does anyone have any idea about the origin of this message which does not seem to disrupt the NAS operation. thanks konki

• 1

  Reputation Points

• 5 replies
• 6.9k views
• 1 follower

porg

January 1, 20233 yr

Dear All, I don't have much experience with the eMMC, and I wonder if I can flash this image: Armbian_22.11.1_Odroidxu4_bullseye_current_5.4.225.img.xz directly into the eMMC through Etcher, or do you recommend DD instead? Thanks... 🙏

• 0

  Reputation Points

• 3 replies
• 3.5k views
• 1 follower

freezr

December 13, 20223 yr

$ systemctl status ● henry State: degraded Jobs: 0 queued Failed: 1 units Since: Sat 2022-12-03 10:19:04 GMT; 24h ago $ systemctl list-units --failed UNIT LOAD ACTIVE SUB DESCRIPTION ● logrotate.service loaded failed failed Rotate log files $ journalctl -u logrotate.service Journal file /var/log/journal/c87d7c4913d949949100f089ec48b092/system.journal is truncated, ignoring file. -- Journal begins at Sun 2022-12-04 00:00:06 GMT, ends at Sun 2022-12-04 10:33:57 GMT. -- Dec 04 00:00:06 henry armbian-ramlog[2714]: /usr/lib/armbian/armbian-ramlog: line 153: /var/log/./journal-20220019-00:00:05/c8> Dec 04 00:…

• 0

  Reputation Points

• 2 replies
• 3.3k views

Malbonulo

December 7, 20223 yr

Straightforward! See signature. Thanks to the team.

• 0

  Reputation Points

• 0 replies
• 2.2k views

FredK

December 3, 20223 yr

Hello, when I try to update the kernel via armbian-config (System -> Other ), I always get the message "Test installed failed. Can't change firmware". I use the Image "Armbian_22.08.5_Uefi-x86_bullseye_current_5.15.73" The /tmp/switch_kernel.log says the following linux-image-current-x86=22.08.6 linux-dtb-current-x86=22.08.6

• 0

  Reputation Points

• 5 replies
• 4.4k views

Igor

December 1, 20223 yr

Hi All , I try to install Armbian_22.08.7_Uefi-x86_bullseye_current_5.15.69_gnome_desktop.img.xz and using rufus to create bootable flashdisk to install on mini pc z83 but found the result as error: attempt to read or write outside of disk 'hd0' , is anyone here know what is the problem and what should I do? Thx in advance

• 0

  Reputation Points

• 2 replies
• 3.9k views

t3l3m4k0

November 30, 20223 yr

Hello. I freshly installed bullseye from the other supported variant links for an odroid XU4. When trying to get docker daemon running, it looked like the ip_tables module and br_netfilter modules weren't available in the kernel. I think I have sorted out ip_tables (modprobe doesn't return any problems now), but docker's daemon is still showing a problem when running dockerd (with debug level info in the daemon.json file): Running modprobe bridge br_netfilter failed with message: modprobe: WARNING: Module bridge not found in directory /lib/modules/5.19.10-armmp-lpae When executing systemctl status docker.service ... …

• 0

  Reputation Points

• 2 replies
• 3.9k views

Igor

November 25, 20223 yr

Is it possible to transfer the entire Armbian system from SD card to HDD? ... it is known that the SD card has a lower endurance than such a HDD dist (write, read etc.) I tried to transfer the system in such a way that I first upgraded the kernel to the newest one on the SD card and then moved the system files to a partition on the HDD: mount /dev/sda1 /mnt time tar --one-file-system -cpf - / | (cd /mnt && tar -xpf -) then knowing the sda1 partition information and ID lsblk -f then knowing the sda1 partition information and ID I changed the UUID / HDD number in two locations nano /boot/boot.ini and nano /etc/fstab after rebooting…

• 0

  Reputation Points

• 2 replies
• 3.8k views
• 1 follower

kris777

November 18, 20223 yr