Rockchip
Quick links to search tags:
Banana Pi M7, BIGTREETECH CB2, Khadas EDGE2, Libre Renegade, NanoPC T6 LTS, NanoPi M5, NanoPi M6, NanoPi R3S LTS, NanoPi R4S, NanoPi R6S, NanoPi R6C, NanoPi R76S, Odroid M1, Orange Pi 4 LTS, Orange Pi 5, Orange Pi 5 Plus, Pinebook Pro, ROCK 5A, ROCK 5B, ROCK 5C, ROCK 5 ITX, ROCK PI E, ROCK PI S, ROCK S0, Zero 3W/3E, RockPRO64, Tinkerboard
-
My current setup is the tinkerboard powered by the raspberry pi universal adapter connected to ethernet and a external HDD(Maxtor M3) powered by the Tinkerboard's usb. I have used it very lightly in this configuration (ssh-ing into it and copying some files to the hdd) but from what I have gathered from the information available here this powering setup is inedequate and will lead to problems. So I want to follow the recommended method and power it through the GPIO pins. I am considering using this or this powersupply. (I realize 10A on the second one is overkill for the tinkerboard, but the price difference from the 3A rated one is minimal and I could find some othe…
-
Reputation Points
- 37 replies
- 58.2k views
- 2 followers
-
-
Rk3588 boards now share the same linuxfamily as rk3568 and rk3566 boards. It means rockchip-rk3588 kernel won't get update longer. Here is some steps for migration: sudo sed -i 's/LINUXFAMILY=rockchip-rk3588/LINUXFAMILY=rk35xx/g' /etc/armbian-release sudo apt update sudo apt install linux-image-legacy-rk35xx linux-dtb-legacy-rk35xx linux-headers-legacy-rk35xx sudo apt remove linux-image-legacy-rockchip-rk3588 linux-dtb-legacy-rockchip-rk3588 linux-headers-legacy-rockchip-rk3588 NOTE: The steps are currently for beta branch only. Don't try on stable branch.
-
Reputation Points
- 15 replies
- 36.7k views
- 2 followers
-
-
I have recently accepted the 23.11.1 armbain kernel release on my RockPro 64 The update has not rebuilt or updated the uIntrd for the 6.1.63 kernel. Note that the /boot/uInitrd symlink still points to the old uInitrd version but the other two symlinks have updated. root@jupiter:~# ls -l /boot/dtb /boot/Image /boot/uInitrd lrwxrwxrwx 1 root root 29 Dec 2 20:38 /boot/dtb -> dtb-6.1.63-current-rockchip64 lrwxrwxrwx 1 root root 33 Dec 2 20:38 /boot/Image -> vmlinuz-6.1.63-current-rockchip64 lrwxrwxrwx 1 root root 33 Nov 30 18:04 /boot/uInitrd -> uInitrd-6.1.50-current-rockchip64 root@jupiter:~# ls -l /boot/uInitrd* lrwxrwxrwx 1 root root …
-
Reputation Points
- 4 replies
- 4.9k views
- 1 follower
-
-
-
Reputation Points
- 820 replies
- 453.7k views
- 10 followers
-
-
Same with your ROC-RK3399-PC (Renegade Elite): https://libre.computer/products/boards/roc-rk3399-pc/ How do you plan to solve heat dissipation there? And do I get it right that the USB-C in the upper left corner is meant as a generic 12V input?
-
Reputation Points
- 326 replies
- 144.8k views
- 11 followers
-
-
-
Kodi on Orange Pi 5 with GPU Hardware Acceleration and HDMI Audio Huge thanks to user @roykon the Armbian forums for the directions on this in their various forum posts and Armbian forum user @amazingfate for maintaining the PPAs and software builds required for GPU acceleration. I have simply listed below, for the reference of others, the minimum Steps used to get Kodi running with GPU hardware acceleration (for x264/x265 decode) plus HDR auto switching and with HDMI Audio output*. (I am using the Orange Pi 5 with a Samsung 4K TV) *No instructions added yet for enabling HDMI passthrough. ** No instructions added yet for enabling HDMI CEC. …
-
Reputation Points
- 210 replies
- 181.2k views
- 9 followers
-
-
What? Sharing various gaming experiences with RK3588 (Orange Pi 5) on Armbian. Why? Because RK3588 is a capable gaming chipset, Armbian is a good OS; Vulkan on RK3588 is getting better over time (PanVk) How? Posting your gaming results here (preferably with setup and screenshots/videos) so people can learn more.
-
Reputation Points
- 197 replies
- 79.5k views
- 4 followers
-
-
THE MEDIA SCRIPT IS DEPRECATED, IN FAVOR OF THE OFFICIAL LEGACY MULTIMEDIA FRAMEWORK. PLEASE REFER TO THIS TOPIC: The UN-official, UN-supported, UN-necessary, UN-popular, UN-precedented... RK3288 MEDIA TESTING SCRIPT [2.0: Bionic update] So here is the final release of the RK3288 media testing script. Basically, the script provides the following functionality: Installing all the libraries and system configurations necessary for GPU accelerated X desktop, Chromium WebGL, full VPU video play acceleration up to 4k@30 HEVC (the maximum supported by the SoC), and GLES 3.1 / OpenCL 1.2 support. Three video players suppor…
-
Reputation Points
- 152 replies
- 135.9k views
- 9 followers
-
-
Alright, the biggest issue with the ASUS Tinkerboard being "resolved", I'm starting to take care of the VPU driver, in order to use it with mainline kernels. The hardware video encoding/decoding facilities are the real meat of the RK3288, and recent Rockchip boards. The VPU driver aims to use these facilities in order to provide the smooth video playback experience that every Netflix/Hulu addict expects when buying such boards. Which mean, once this part dealt with, you might be able to enjoy your Multimedia oriented distributions/softwares on your Rockchip boards (MiQi, Tinkerboard and maybe Pine64 too !) So the driver is already …
-
Reputation Points
- 150 replies
- 89.2k views
- 7 followers
-
-
-
THE MEDIA SCRIPT IS DEPRECATED, IN FAVOR OF THE LEGACY MULTIMEDIA INTEGRATION. PLEASE REFER TO THIS TOPIC: So finally we have the first version of: The UN-official, UN-supported, etc... RK3399 MEDIA TESTING SCRIPT This is the first release of the RK3399 media testing script. The script provides a functionality similar to its RK3288 equivalent: Installing all the libraries and system configurations necessary for GPU accelerated X desktop, Chromium WebGL, full VPU video play acceleration up to 4k@60 10-bit HEVC (the maximum supported by the SoC), and GLES 3.2 / OpenCL 1.2 support. Three video players supporting full VPU accel…
-
Reputation Points
- 118 replies
- 134.1k views
- 13 followers
-
-
IT'S FINALLY HERE... THE OFFICIAL ROCKCHIP-LEGACY MULTIMEDIA INTEGRATION After two years of using a separate script to enable the multimedia features in RK3288/3328 Legacy Kernel, the whole framework has been incorporated to the official Armbian packaging system. The choice distro for this integration is Debian Buster (see FAQ at the end of this post about the reasons). I. Installation Download a Armbian Buster Legacy Desktop image for your board, and install it with the standard Armbian method. Install the complete multimedia solution with sudo apt update && sudo apt upgrade sudo apt install media-buster-legacy…
-
Reputation Points
- 112 replies
- 99.6k views
- 9 followers
-
-
Hi. I need hardware OpenGL ES, at least 2.0. I’ve tried this https://github.com/rockchip-linux/libmali It works OK on latest Asus OS 2.0.1, but for Armbian 5.33 kernel 4.4.88 it doesn’t: ERROR: The DDK is not compatible with any of the Mali GPUs on the system. The DDK was built for 0x750 r0p0 status range [1..1], but none of the GPUs matched: Segmentation fault I don’t have much experience with Linux, but IMO it might mean the kernel + userland parts of the GPU driver are incompatible. Is there a working GPU driver for Mali-T76x on Armbian? Thanks in advance! Regards, Kosta.
-
Reputation Points
- 103 replies
- 73.6k views
- 2 followers
-
-
I installed Debian 12 (Bookworm)XFCE from the official Armbian website onto the NVME SSD of the board. Everything works fine except the 4 hard drives that are connected to boards SATA connectors. They do appear and work when i boot into the Debian provided by Radxa, so I know hardware isn't an issue. I think that they also worked during the very first boot of the system but after ``` apt update && apt upgrade ``` and reboot, they stop working. Any advice would be much appreciated. ``` rock-5-itx:~$ lsblk NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINTS mtdblock0 31:0 0 16M 0 disk mmcblk0 179:0 0…
-
Reputation Points
- 97 replies
- 39.4k views
- 8 followers
-
-
-
Version 20230325-edge with kernel 6.2 (pancsf-midstream). With HDMI USB LAN support. https://disk.yandex.ru/d/Xt36QdVcxRdEDA
-
Reputation Points
- 85 replies
- 54.1k views
- 4 followers
-
-
Hello everyone, I've begun working to target the Armbian Legacy Tinker Board build to the Rockchip kernel. There are a list of reasons why it needs done, including some relatively large differences between the current kernel's code base and the Rockchip kernel (making it hard to patch with bugfixes/etc) and inactivity on the part of the vendor of that kernel. There are also reasons I am preferring to use the Rockchip kernel rather than the ASUS kernel. First and formost is the need to also support the MiQi. The miniarm branch of Rockchip and the ASUS kernel have board-specific fixes written in such a way as to not be friendly to other boards. I've dec…
-
Is it just me .... all the time I start to use the Armbian web browser ...including simply loading this forum the whole RockPro64 OS locks up and I have to reset,. Typically its when I load Media web sites like the BBC ,.... but it even occurs when I load this forum!! I am trying to develop some C GPIO library to help the rockPro64 community, but its hopeless. I have to work on console and web brows on a laptop. I have ordered a KVM to help but this is really frustrating. Because the HW locks up I can not detect any issues in the logs and I don't know how to set up a HW trace in the graphics drivers. I have eliminated any Pow…
-
Reputation Points
- 82 replies
- 38.5k views
- 4 followers
-
-
Is there any plan to port to the Pinebook Pro?
-
Reputation Points
- 79 replies
- 39.7k views
- 10 followers
-
-
Hi, I have two rockpro64 boards. One board runs Debian buster with a slightly extended ayufan 5.4.0-rc1 kernel where as the other runs a Armbian (Debian) buster with the current project supplied 5.4.0-rc1 kernel. On the Debian on I have installed the nice ats solution (https://github.com/tuxd3v/ats#install) On the Armbian one the fan is running all the time. I tried to install ats there as well but I failed. Also I found that basically the /sys/devices/platform/pwm-fan/hwmon is not there, only upto pwm-fan I have. Is there some module I need to load or compile into the kernel to get ats working on the Armbian base…
-
Reputation Points
- 79 replies
- 49.6k views
- 3 followers
-
-
I have 85 tinkers running with armbian 5.41 xenial next 4.14.23. Normally I run a script that apt upgrades them all but I run a small batch of them first as a test. Today I ran apt update/upgrade on three of them and they are all bricked. No output to the screen. Can't ping them. Any ideas?
-
[UPDATE 2018/05/21: I have created a script to configure everything described in this tutorial, plus some more things. There will be no updates to the tutorial from now on. Please refer all the questions and bug reports to the script. It can be found here:] [UPDATE 2018/03/16: Fixed mpv package] [UPDATE 2018/03/01: Added OpenCL testing through GPU cryptocurrency mining] With the new default kernel based on rockchip-linux, boards with RK3288 SoC have now full kernel support for interacting with the GPU and hardware video decoder. Rockchip-linux also provides userspace libraries and other software to make everything work. In this tutorial, you'…
-
Reputation Points
- 68 replies
- 62.1k views
- 8 followers
-
-
I have created a micro desktop case. It's an open design that is still in the creation phase. The shell is 3d printed, the sides are acrylic, and the opi5 mount panel can be 3d printed or made from acrylic. I'm looking for feedback with design suggestions/needs. This is the first real opi5 micro tower design currently for OPI5. My cad drawing of the OPI5 mainboard is 99.9% accurate, so if someone wants to use that as a footprint for other projects by all means. https://github.com/berin-aquaquad/orange-pi-5 I am using DesignSpark Mechanical a free cad software that is on par with Fusion360. The shell has been designed as a split body so smaller 3d printers can c…
-
Reputation Points
- 63 replies
- 30.8k views
- 3 followers
-
-
Hi all, Just want to share this issue i came across from my recently purchased OPI5+ 32GB version. I noticed it freezes when transferring .img from micro SD card to eMMC or NVMe drives via the command line. Now the img file are armbian OS and no its not the img file issue. at times I can get it to around 70seconds and it will freeze. hard reboot is required, unable to complete the transfer. I have also tried to reduce the bs=10 speed but still the same. Now i have also got the 16GB version and this works fine with no issues... Good chance there is something wrong with this latest hardware..…
-
Reputation Points
- 61 replies
- 30k views
- 5 followers
-
-
I am trying to install Ambian on to the BananaPi-M7 to eMMC using option 6. there is no option for NVME / M2 SSD. I had a failed install as the uSDCard image was 256GB larger than the eMMC, so it balked. I tried a 128GB uSDCard, followed by a 64GB uSDCard, but got the same error each time even on the 64GB one. I seem to have two partitions on the eMMC, mmcblk0boot0, and mmcblk0boot2 now,. I am not sure if they were on the boards eMMC originally or what the boot sequence for the board is If the Masked ROM tries to boot the uSDCard if present and if that fails it boots the eMMC ? Do I clear mmcblk0 and try again with the 64GB uSDcard ? Or is mm…
-
Reputation Points
- 55 replies
- 25.5k views
- 1 follower
-
-
Hi, i would like to know if there will be armbian stretch for rock64pro. I tried images on official website, but there are all with alot of buggs + they have everything messed up with user. I need that clean new image for emmc card. I would start from basic debian stretch image, but i couldnt make it work with etcher. p.s. sorry for my bad English, this is not my native language Best regards, Bekim
-
Reputation Points
- 55 replies
- 36.3k views
- 5 followers
-
-
Update May-15-2018: pushed today, Bluetooth patches to support bt in default and next kernels from boot, no user intervention ( "It just works" ). Thank you again to @Myy and @Jyu Ho for their work. Spoiler Trying to get the Bluetooth working, I've had a few different issues, I've labelled them per kernel: Default: Running "hci_attach" locks up the board after config and loading firmware. UPDATE June-25-2017: Disabling DMA on uart0 resolved the issue as theorized below. UPDATE Feb-22-2018: Services added loading Bluetooth automatically on boot, takes reboot after fi…
-
Reputation Points
- 54 replies
- 25.3k views
- 3 followers
-
-
What is the process to get python3 talking to the GPIO pins? I have installed the ASUS-GPIO package but it is not working. Under the tinker debian release, this h/w was working correctly, so I know this is some kind of s/w issue. Thanks!
-
Reputation Points
- 54 replies
- 29.7k views
- 2 followers
-
-
Hello all. I'm doing some tests with the Tinker Board to see what's the best operating system for it for a new video. I'm using the Armbian Ubuntu Desktop legacy kernel. For this I do Blender and Kdenlive renders to see if there's a speed difference. But with both I've got the problem that it crashes the Tinker Board. Sometimes it's a hard crash and the whole system freezes, and sometimes Blender or Kdenlive just close themselfs but Armbian keeps working. I do not have this problem in Lubuntu. In TinekrOS Kdenlive totally doesn't work. It looks the same as an unstable overclock on a system. I've tried different psu's. I'm using the Tinker h…
-
Reputation Points
- 53 replies
- 23.4k views
- 3 followers
-
-
Update May-21-2018: script may have negative impact on HDMI audio, needs further investigation. Patches pushed to enable I2S HDMI device, but audio does not come out. Update Feb-20-2018: script update committed for out of the box audio support (both outputs and inputs) for ASUS Tinker Board. Available sinks: BT-VOIP SPDIF Headset (the jack) Available sources: BT-VOIP Headset-input (the jack) Tinkerboard sound is possible with Armbian, however I have not worked to get it set up "out of the box" because of a major bug in the sound itself, namely that it outputs pure high pitched garbage from certain ap…
-
Reputation Points
- 53 replies
- 38.2k views
- 3 followers
-
-
I have built and used it with the latest source and still HDMI audio and analog audio does not work. Is there any way to get HDMI audio to work other than using the vendor kernel?
-
Reputation Points
- 52 replies
- 19k views
- 1 follower
-
-
*Updated 7-23* ~~All kernels should be fixed at this point, Legacy, Next, and Dev.~~ The ASUS Tinker Board has a big problem with rebooting properly, centered around the SD card power supplies. Upon issuing a shutdown request, the kernel is turning everything off , including the vmmc regulator. To make matters worse, vqmmc is set to 1.8 Volts if you use a UHS SD card, and the kernel is not switching it back to 3.3 volts before rebooting, which is required if the Rockchip boot ROM is to communicate with the device. The result is a hung board in MaskROM mode. For the Default kernel (4.4), a patch was carried over from the vendor softwa…
-
Reputation Points
- 49 replies
- 30.3k views
- 1 follower
-
-
Hello, I installed lm-sensors on my Opi5 and I'm able to check temperatures, however I don't know how to make the little fan spin when the temperature rise. I know the temperature is not going to rise till critical levels, but I live in very hot country and I just don't want my device to become too hot. And do you know how to make the fan start at certain temperature rise? Also I'm not sure which pins I should connect the fan to.. One pin should be the 3.3V to get the power, what about the other one? I'm running Armbian 23.02.2 with kernel 5.10.110-rockchip-rk3588 Thanks in advance
-
Reputation Points
- 48 replies
- 58.2k views
- 8 followers
-
-
As a warning: I have a RockPro64 that was initial setup using the Armbian 20.02.1 buster desktop image (using the 5.4.20 kernel). Over the past few months, I have accepted each minor release of Armbian up to the 20.05.7 release with a 5.4.49 kernel Yesterday, I installed the 20.08 upgrade with 5.7.15 kernel, and the board failed to boot. I have only just got it working again. (I had to restore the kernel and supporting files from a recent backup, and restore symlinks in /boot). I don't know the root cause. I have ordered a second MicroSD card so that I can try booting from a fresh 20.08 image, and I will report back on what happens. In …
-
Reputation Points
- 48 replies
- 25.3k views
- 1 follower
-
-
Hi, Thank you for maintaining this excellent distribution, I have tried out this evening, via SD card, the new Armbian 23.11 Bookworm CLI Kernel 6.7 and I wanted to share some feedback on it along with some queries please: 1) HDMI works connected to my 4K Samsung TV, although I had to turn off "Input Signal Plus" for it to display the console correctly, otherwise there were all manner of green rectangles and other screen corruption present. Turning off "Input Signal Plus" fixed this straight away. 2) I cannot access either of the SSDs I have connected to my powered USB 3 hub. I tried with the hub connected to the USB-C port …
-
Reputation Points
- 47 replies
- 20.4k views
- 1 follower
-
-
My experience so far: 1. Booting up (Jammy/Bullseye) from SD, HDMI out to 1440p display cuts off text at the bottom. It affects installation and later use. I need to press ENTER several times to all questions until text moves up in the buffer and becomes visible, and then blindly type the answer to proceed to the next step, then several ENTERs to scroll again, and so on. Looking at fbset and stty output: me@opi:~$ fbset -i mode "2560x1440" geometry 2560 1440 2560 1440 32 timings 0 0 0 0 0 0 0 accel true rgba 8/16,8/8,8/0,0/0 endmode Frame buffer device information: Name : rockchipdrmfb Address : 0 Size …
-
Reputation Points
- 45 replies
- 25.8k views
- 1 follower
-
-
Couldn't booti from NVME with armbian-config or armbian-install, finally I could do it, a dirty easy and convoluted following way. No details about burning stuff This is what I did 1) boot system from fresh downloaded SD (Armbian Jammy Desktop) 2) NVME setup (sudo gparted) - if empty create a partition table (GPT) if not delete all partitions - create 256MB FAT16 partition (nvme0n1p1) - create EXT4 partition (nvme0n1p2) - optionally create more partitions (system recovery, backups ...) - format partitions nvme0n1p1 -> FAT16 - format partitions nvme0n1p2 -> EXT4 - check partitions (if old N…
-
Reputation Points
- 43 replies
- 31.6k views
- 2 followers
-
-
Greetings everyone. I hope to receive some assistance here. Our company is a small Linux cloud gaming provider that uses the Cinnamon edition of Linux Mint for our cloud gaming services https://maximumsettings.com/ . We are searching for an affordable local streaming device that we can recommend to our clients, capable of decoding H.265 at 4K - 80Mbps. The Orange Pi 5 is a perfect fit for this role, and the Armbian Cinnamon desktop is well-suited since our clients already use Linux Mint Cinnamon edition on the cloud Gaming PC. However, there is currently no support for our open-source streaming client, Moonlight, which we use as the default option for our clients. T…
-
Reputation Points
- 42 replies
- 23.2k views
- 1 follower
-
-
A new variation of Orange Pi 5 is now available. I think it's available on AliExpress, but I've seen the item on Amazon.com as well...reasonable price: https://www.amazon.com/Orange-Pi-Rockchip-Frequency-Development/dp/B0C5BZLPZN It comes now with the RK3588 instead of the RK3588s of the 5 and 5B. It's similar in capabilities of the Rock 5B but I believe has a few more bells and whistles. It has two 2.5GB ethernet ports. Separate connectors than GPIO for RTC and fan. Full size HDMI input as well as 2 full size HDMI outputs. Can have m.2 for 2230 WiFi/BT on top side as well as m.2 2280 on bottom of board. I think it can only go up to 16GB me…
-
Reputation Points
- 42 replies
- 44.3k views
- 9 followers
-
-
armbianmonitor -u https://paste.next.armbian.com/hoyonuruye I installed the newest fresh debian minimal image for the RockPi-S and no matter what I do overlays do not apply. I've followed and compiled spi1 and spi2 rk3308. I've also tested the external antenna device tree as I have installed an external antenna: However neither the external antenna is being used nor spidev are present. I have diffed dtc -I fs -O dts /proc/device-tree and they are identical before and after enabling the overlays in armbian-config and rebooting. I was able to confirm the "overlays" work by manually copypasting their changes in …
-
Reputation Points
- 42 replies
- 29.4k views
- 4 followers
-
-
https://wiki.friendlyarm.com/wiki/index.php/NanoPi_R4S I am really excited about this board. https://www.cnx-software.com/2020/11/12/nanopi-r4s-headless-rk3399-sbc-features-up-to-4gb-ram-dual-gigabit-ethernet-usb-3-0-ports/ The first comments below this blogpost are also not so bad besides the fact that USB-C is power-in only.
-
Reputation Points
- 41 replies
- 34.7k views
- 7 followers
-
-
Hi everyone, I've been working with Armbian for a while on my Rock Pi S, I got to a stable situation on version 24.11.1 with kernel 6.6.63 where everything worked perfectly... but recently this last week I applied an apt upgrade, which applied strong base modifications (linux-current-rockchip64 and dtbo going from 24.11.1 to 24.11.3), after applying this update and rebooting, I can't get it to boot again, either from the Micro SD or from the eMMC installation. I wanted to report this bug, but I don't have a TTL cable at hand to be able to do the corresponding debugging... I've tried to flash older versions, or even flash the 24.11.1 version again …
-
Reputation Points
- 40 replies
- 22.2k views
- 3 followers
-
-
Tinkerboard (not 2) not booting after kernel updates for some reason. Who knows how to fix this?
-
Reputation Points
- 38 replies
- 15k views
- 4 followers
-
-
Hi, I am looking at investing in a RockPro64 NAS setup using the Pine64 Desktop casing and other necessary accessories. I'm hoping to run OpenMediaVault on it and have 2 3.5" HDDs attached. The entire setup would be configured to be a backup of my operational NAS (Helios4) in a different location (i.e. different room of the house). My reading of the forum and the armbian download section has me a bit confused. The download section indicates that the board is supported, but the forum indicates it's a WIP. Just trying to understand the status/stability of the board for what I'm planning on using it for and whether it would be a good investment o…
-
Reputation Points
- 37 replies
- 27.4k views
- 4 followers
-
-
Topic to discuss RK3288 overlays, primarily concerning ASUS Tinker Board, the MiQi is technically EOL and has very little GPIO anyway, and TV boxes are more or less sealed. Kernel 4.19 will be the pilot for this, the discussion now that it seems to be working thanks to @martinayotte and @zador.blood.stained's feedback and examples is what to overlay. For testing/debugging I started with some ASUS overlays for RTC and 1wire. Easy ones: spidev out of the default tree but as default overlays. instead of making 1 overlay and messing with parameters, just make 2 overlays DAC's: I don't have a lot of hardware to play with, but @…
-
Reputation Points
- 35 replies
- 20.9k views
- 2 followers
-
-
Hi, just installed 23.8.1 on my odroid M1, and I get poor network perf when using 1G port speed. iperf to another machine (iperf -c <server>, M1 sends traffic) gives the following: [ID] Interval Transfer Bitrate Retr [ 5] 0.00-10.00 sec 8.15 MBytes 6.84 Mbits/sec 631 sender [ 5] 0.00-10.04 sec 7.86 MBytes 6.57 Mbits/sec receiver reverse direction, M1 receives traffic: iperf -R -c <server> [ ID] Interval Transfer Bitrate Retr [ 5] 0.00-10.04 sec 1.10 GBytes 937 Mbits/sec 587 sender [ 5] 0.00-10.00 sec …
-
Reputation Points
- 35 replies
- 13k views
- 2 followers
-
-
Please advise what patch can I apply during compilation of Armbian Jammy for Tinkerboard S R2.0 to completely hide u-boot logo and messages? And where the patch should be placed? There are many folders in /home/max/build/patch/u-boot/ Thanks!
-
Reputation Points
- 34 replies
- 13.1k views
- 2 followers
-
-
Hey My Tinker board is my first dev board and it runs damn hot, I saw this and it says its for the PI, can somebody in the know tell me if It would work on the Tinker Board please. I am running Armbian Ubuntu server temp fan control Thanks!
-
Reputation Points
- 34 replies
- 19.9k views
- 1 follower
-
-
Hello, I have roughly 30 Orange Pi 5 here in the office setting up for deploying in the field. NVMe boot is working great after using 'nand-sata-install' to flash the MTD. But sometimes (rarely, but happens), when issuing a reboot of Armbian, after full kernel shutdown, the player does not boot back up. Power light is on, no activity blinking LED. Network link and activity blinking. Just won't boot. Requires physically disconnecting power for a few seconds then re-plug to get to boot. I have watchdog set in Armbian and tested that works. So this seems to be before Linux kernel has taken control. Is there any way to enab…
-
Reputation Points
- 33 replies
- 19.7k views
- 2 followers
-
-
Hello ! I see in config file of kernel 4.14 support for RTC ds1307. But in system i not see RTC. I just see RK808 RTC. I need your help for use DS1307 in my tinkerboard because rk808 is not fonctional ( no battery)
-
Reputation Points
- 33 replies
- 22.8k views
- 3 followers
-
-
Hi, I put the image on an SD card, but the machine fails to boot. Looking at the serial console, it just sits in a loop with the CPU constantly resetting after an exception. Serial console log is attached. Regards, Dianne. bootloop.txt
-
Reputation Points
- 32 replies
- 14.1k views
- 1 follower
-
-
I know for sure that booting from an sd card and then using dd to write the uncompressed image to the emmc device isn't what works. I'm talking about Armbian_22.02.1_Pinebook-pro_focal_current_5.15.25_xfce_desktop.img here. Because that essentially bricked my PBP. I have the little adapter to connect the emmc to a usd slot, and using balena etcher to write to that isn't it either. the uboot in that image prevents booting from sd automatically as well, and i didn't find any uboot documentation that made it clear how to manually boot from sd, though i did hook up a serial console. This is what it said. The LED never turned green, the display flashe…
-
Reputation Points
- 32 replies
- 24.7k views
- 3 followers
-
-
Hi all, first post here so please forgive me if I've get any bits wrong. Thanks for all the work put into supporting this project, and thanks in advance for any and all considerations extended in helping me step through my issue here. so i've had an 8 node kubernetes cluster running fairly smoothly on my tb's for nearly a full year now, so far I have not had any major issues with armbian updates until this weekends... I did a round of updates to my cluster and, after rebooting all 3 of my model S tinkerboards seem bricked (redlight only, no output to HDMI).. The remaining five orig TB models with Samsung EVO SD's all came up without issue... s…
-
Reputation Points
- 31 replies
- 17.6k views
- 2 followers
-
-
Looking for a current realtime RTOS real time deb package or SD card image for the tinkerboard. I have been trying to compile a current real time build. All of my attempts have failed so far. free offer described below
-
Reputation Points
- 29 replies
- 14k views
- 3 followers
-
-
Hello, I tired to boot Armbian for my Rock5b but whatever image I choose to use, I'm never able to get past U-boot into linux when looking at the Uart output. Here are the log I get: ``` U-Boot SPL board init U-Boot SPL 2017.09-gd1cf49135ee-220414-dirty #stephen (May 23 2024 - 19:39:28) Trying to boot from MMC2 GUID Partition Table Entry Array CRC is wrong: 0x71678773 != 0xab54d286 part_get_info_efi: *** ERROR: Invalid GPT *** part_get_info_efi: *** Using Backup GPT *** spl: partition error Trying fit image at 0x4000 sector ## Verified-boot: 0 ## Checking atf-1 0x00040000 ... sha256(7612223b82...) + OK ## Checking uboot 0x00200000 ..…
-
Reputation Points
- 29 replies
- 6.1k views
- 1 follower
-
-
Hello, I'm having issues with my Orange Pi 4 LTS. I cannot get any HDMI output at the moment. Neither with the Debian flashed on the eMMC, or with Armbian running of the SD card. In both cases I can SSH into the Orange and run commands normally. The HDMI worked just a day before, but in the meantime I was flashing different systems and it stopped working. I tried different monitors and cables. Any ideas what can I do?
-
Reputation Points
- 29 replies
- 18.4k views
- 5 followers
-
-
I need one more component working. 3D and OpenCL. Has anyone successfully installed Panfrost on a RK3399 board ? Update! I manged to build the Panfrost X11 driver. Here's how I did it: https://panfrost.freedesktop.org/building-panfrost-mesa.html Before you create the build directory update the meson_options.txt file change platforms from auto to x11 change dri_driver from auto to swrast change gallium-drivers to panfrost cd to the build directory meson .. . -Ddri-drivers= -Dvulkan-drivers= -Dgallium-drivers=panfrost -Dlibunwind=false --prefix=/{wherever you want} ninja install …
-
Reputation Points
- 28 replies
- 28.1k views
- 3 followers
-
-
I put a TinkerBoard in a Pi-Top CEED and using TinkerOS 2.0.8 it boots and the LCD works fine. Using Armbian it looks like it boots but nothing is displayed on the LCD. The Pi-Top CEED uses a HDMI to 30-pin converter board and the current LCD is a 1920x1080 14in that I used to upgrade the original. Any ideas why the Raspberry running Raspbian and The Tinkerboard running TinkerOS would work with the display but Armbian wouldn’t?
-
Reputation Points
- 27 replies
- 8.8k views
- 1 follower
-
-
I've got Orange Pi 5 Plus board with 16 Gb of RAM, 256 Gb of eMMC, Realtek RTL8852BE-CG wireless module. SD card is Samsung EVO Plus 32Gb. I tried to run Armbian images on this board (from the SD-card I've mentioned before) but it was absolutely failed. I tried 5 images: Armbian_23.11.1_Orangepi5-plus_jammy_legacy_5.10.160_gnome-amazingfated_desktop.img.xz Armbian_23.11.1_Orangepi5-plus_bookworm_legacy_5.10.160.img.xz Armbian_23.11.1_Orangepi5_jammy_legacy_5.10.160_gnome-amazingfated_desktop.img.xz Armbian_23.11.1_Orangepi5-plus_bookworm_edge_6.7.0-rc1.img.xz Armbian_23.11.1_Orangepi5-plus_jammy_edge_6.7.0-rc1.img.xz which…
-
Reputation Points
- 27 replies
- 20.2k views
- 2 followers
-
-
I want to install jellyfin as a docker container on my Orange pi 5. How can I enable hardware acceleration for it? On the container page (https://hub.docker.com/r/linuxserver/jellyfin) there are instructions for various options, but orange pi 5 is not there of course. I have enabled 3D acceleration as mentioned on the armbian page for orange pi 5.
-
Reputation Points
- 27 replies
- 31.6k views
- 5 followers
-
-
I updated to Armbian 26.2.1 on OPi5, and it can't boot from MTD (rootfs at NVMe), and I have to use SD card to boot to NVMe as workaround. After looking into this issue, I found rkspi_loader.img is no longer available for current (6.18.8 kernel) u-boot pkg and armbian-config flashes u-boot-rockchip-spi.bin ( or similar sata version) to /dev/mtdblock0 and I think this is wrong image for MTD bootloader. If I use older vendor image, which u-boot pkg has rkspi_loader.img, system can boot to NVMe rootfs and I notice that /dev/mtdblock0 has several gpt partitions including u-boot one, and flashing u-boot-rockchip-spi.bin erases partitions in SPI flash. I…
-
Reputation Points
- 27 replies
- 10.5k views
- 2 followers
-
-
Hi, Im pretty new to linux in general mostly used windows before. Is there a way to get waydroid work on armbian? I installed it but waydroid sais that the binder kernels are missing (1). When I follow the instruction to install the kernel modules using dkms I also get a failure (2). (1) ERROR: Binder node "binder" for waydroid not found (2) Error! Bad return status for module build on kernel: linux-headers-5.10.110-rockchip-rk3588 Anyone can help me with this? Thanks in advance!
-
Reputation Points
- 27 replies
- 17.4k views
- 1 follower
-
-
Version 20230401 with kernel 6.2 (pancsf-midstream). With HDMI USB support. https://disk.yandex.ru/d/W8pOOhizVjq91A To enable HW acceleration, install the mesa package with the forced overwrite option or an archive to enable acceleration for wayland. To enable wayland acceleration, you need to replace the files in the /usr/lib/aarch64-linux-gnu directory with the contents of the archive (with file replacement). After that, acceleration will work with wayland. X11 and wayland acceleration works the same way on Debian Sid (the images are the same as Ubuntu). After starting the system and initial configuration, replace the files from the archive…
-
Hello everyone Just would like to start a discussion about the current state of video acceleration (decoding only, h.265/h.264/av1). The soc (rk3588) recently got mainline support for these features in 7.0: https://gitlab.collabora.com/hardware-enablement/rockchip-3588/notes-for-rockchip-3588/-/blob/main/mainline-status.md Has anyone tested this on a OPI5 already, especially using Kodi? Does this work ootb there now? Regards, XXXBold
-
Reputation Points
- 26 replies
- 8.9k views
- 3 followers
-
-
I've been using a few Rock Pi S devices as snapcast clients and after updating them to Armbian 24.8.2 audio does not work anymore. This seems similar to this old post (fix PR). Also, this PR may be a relevant to the issue. https://paste.armbian.com/aziwayelen $ snapclient --host [REDACTED] 2024-09-17 09-28-10.435 [Error] (Snapclient) PCM device "default" not found 2024-09-17 09-28-10.436 [Info] (Snapclient) Version 0.26.0 2024-09-17 09-28-10.437 [Info] (Connection) Resolving host IP for: [REDACTED] 2024-09-17 09-28-10.440 [Info] (Connection) Connecting 2024-09-17 09-28-10.442 [Notice] (Connection) Connected to 192.168.0.100 20…
-
Reputation Points
- 26 replies
- 11.8k views
- 3 followers
-
-
Hello, I own a RockPro64 and I'm using Armbian Legacy Buster 4.4.213-rockchip64. Everything mostly works, although I've had a pretty annoying issue. Reboot just doesn't work. Every time I do a 'sudo reboot' (or any equivalent for that matter, as for example 'sudo shutdown -r now') it doesn't work. Although it apparently reboots, the TV monitor to which my box it's connected via HDMI lose connection and all, nothing actually happens. Both the red and the white leds of the RP64 turn on and keep on all time (instead of just one of them blinking, as expected) and then it will work only if I poweroff and on again, either by unplugging the power cable or…
-
Reputation Points
- 25 replies
- 11k views
- 3 followers
-
-
Hello again, Based on the recommendations provided in a previous ticket, I have decided to attempt to build a custom image for the Orangepi 5 Plus. I read the docs provided in the link of that post and noticed that there is no mention of installing the cross complier tool chain for arm in ubuntu 22.04, which I just downloaded for this purpose. Do I need to install those tools or will that be addressed once I clone the git repo and run the compile.sh BOARD=orangepi5-plus ? Also the instructions mention Multipass and Docker, I have a Debian 12 workstation with virt-manager installed, will that work or will I need a dedicated ubuntu 22.04…
-
Hi all, I've got an application that runs from the terminal and with it failing to work on Tinker OS I've gone back to my default OS, Armbian, where it works faultless. However, everything worked great on my own 25" Philips monitor.... The Tinker Boards will be plugged into a number of 1440 x 900 60hz Samsung and LG HDMI monitors; the only screens available where I am. When using these screens I get a 2-3 pixel vertical purple line down the left of the screen and horrific 1 pixel high, long horizontal multi-coloured lines 'snowing' down the screen like old TV interference. The LG monitors consistently flicker on and off trying to change resolution.…
-
Reputation Points
- 24 replies
- 11.2k views
- 1 follower
-
-
Hello, Thank you ahead of time!! I realize there is not an armbian disro for the roc 3328 renegade. It does seem that you all can help with my issue though. I recently patched and compiled a kernel to run real time with the rt preempt. The issue I'm running into is this thing doesn't use grub , so I can't choose the kernel at boot up like a x86 and it doesn't have a config file like a rspi. Is there a way around this ? I'm way out of my comfort zone here. According to what I have read, I need to copy the vmlinuzrt18 to the area where the present kernel is being called now. I admitting find the whole u boot thing confusing. Can anyone help me out? Th…
-
Reputation Points
- 23 replies
- 10k views
- 1 follower
-
-
I've been trying to configure the HDMI screen I purchased for the orange pi 5. It's listed to work with the raspberry pi so I figured it should work with the orange pi 5 as well. When I connect the screen, the screen just turns white. These instructions were included in the manual to configure the usage of the screen with the raspberry pi, but I am not familiar with how to translate the configuration into armbian. Write the image to the TF card, then modify the following configuration in config.txt: # uncomment to force a specific HDMI mode (this will force VGA) hdmi_group=2 hdmi_mode=87 hdmi_cvt 1024 600 60 6 0 0 0 # unc…
-
Reputation Points
- 23 replies
- 19.2k views
- 2 followers
-
-
As discussed on multiple threads, the aim of this thread is to bring all RockChip devices under one BSP (4.4) Kernel. This discussion can be found (partly): and a bit background here: https://github.com/rockchip-linux/kernel/issues/98 Cause I'm not willing to cut out all this stuff from the related threads (this would end in a complete disaster) I try to summarize it here (if something is missing, let me know I'll add it): RockChips BSP kernel is not longer an option. Cause it breaks faster that our current resources allow to fix it. Having all SoCs under one kernelsource would make it more predictable and decrease the efforts needed to keep…
-
Reputation Points
- 23 replies
- 14k views
- 1 follower
-
-
Seems like the kernel 6.12.16 just does not boot - either updated regularly or from "rolling" minimal image. Steps to reproduce: - 1 way - just burn and run current "rolling" minimal image (Armbian_25.5.0-trunk.115_Orangepi4-lts_plucky_current_6.12.16_minimal). Result: Getting no records on UART after "Starting kernel..." and only red led shining. - 2 way Enabling kernel updates from already up to date Armbian v25.2.2 with older 5.15.76-rockchip64 (`# sudo armbian-config` -> System -> Kernel -> SY201 - Install alternative kernels) Result: same as above - 3 way Enabling kernel updates from older Armbian 22.08.10 without Armbian update itself.…
-
Reputation Points
- 22 replies
- 11k views
- 3 followers
-
-
Are there any USB WiFi adapters that are supported out of the box? Nothing fancy, just looking for a cheap readily available USB WiFi adapter that doesn't require finding kernel headers and downloading modules to compile that will then be wiped out by the next release. I am currently using Armbian_23.02.0-trunk.0220_Orangepi5_jammy_legacy_5.10.110_xfce_desktop.img installed and booting from a 256GB NVME drive. Ethernet is an option but I'd like to make it more portable. What have you guys used and had success with? My network is WiFi 6+ but not having the best speed is just fine. Thanks in advance.
-
Reputation Points
- 22 replies
- 47.6k views
- 4 followers
-
-
i have upgraded armbian on tinkerboard asus form 5.35 to 5.38. And this changed cpu governor to conservative. I have changed it to performance. BUT previous max cpu speed was 1.80GHZ and now i have only 1.61.GHZ I have cooler with fan on my tinkerboard and iam not scared high cpu temperature. Hov to get back to the maximum 1.80 GHZ frequency ???? I cant add 180000MHZ via sudo nano /sys/devices/system/cpu/cpu0/cpufreq/scaling_available_frequencies to each core permission denied. please help
-
Reputation Points
- 22 replies
- 15.6k views
-
-
Hey folks, im trying to compile a realtime kernel for mt orange pi 5. I plan to use it for djing. A fully preemptive kernel delivers better performance for this, as less xruns appear. I am following the official dev instructions and am using the docker method, Compiling only the kernel, not the entire armbian OS. I copied a realtime patch (actually I tried several sub versions of 5.10) from the kernel.org realtime project site into the userpatches directory (I looked up the correct orange pi 5 subfolder name but forgot it rn) but compiling throws me some errors. Has anyone succeeded in creating a kernel like this for the orange pi 5 and/or co…
-
Reputation Points
- 22 replies
- 21.4k views
- 3 followers
-
-
Using 5.41 I ran armbian-config to install armbian on a tinker board s emmc. Install went ok but get nothing but a black screen on boot. Any ideas on what to do to get it going?
-
Reputation Points
- 22 replies
- 9.2k views
- 1 follower
-
-
Hello there. At present I power my Tinker Board S with a bench power supply set to 5.25V. The power supply has 10A current limiter. I measure the voltage at the GPIO pins using a 6.5 digit multimeter (in cal). The micro usb cord is 1.2 meters (4 feet). When the board is running in tinker os at idle, it is drawing 500mA, and i read 5.00V on the GPIO. But when I load the CPU using sysbench the current spikes to 1.6A, and the voltage measured on the GPIO drops to 4.45V. I measured that the micro USB cable is 0.37Ohm resistance, so about 0.55V of that power drop is due to the micro usb cable. That means all of the voltage drop is not due to the power c…
-
Reputation Points
- 22 replies
- 14k views
-
-
Since Armbian moved to the official Rockchip kernel, camera support should work with their new ISP1 driver. I built an image with the needed drivers but unfortunately it doesn't boot anymore... A boot log with the compiled drivers can be seen here (kernel config is attached to this post): Spoiler U-Boot SPL 2017.09-armbian (Mar 03 2018 - 23:43:36) Returning to boot ROM... U-Boot 2017.09-armbian (Mar 03 2018 - 23:43:36 +0100) Model: Tinker-RK3288 DRAM: 2 GiB MMC: dwmmc@ff0c0000: 1 *** Warning - bad CRC, using default environment In: serial Out: serial Err: serial Model: Tinker-RK3288 Net: eth0: ethernet@ff290000 Hit any key to stop a…
-
Reputation Points
- 22 replies
- 10.3k views
- 2 followers
-
-
Hi, A UEFI-ARM64 install of armbian opi5+ 24.11.0-trunk fails during armbian-install due to incorrect knowledge of partitions: root@uefi-arm64:/usr/sbin# lsblk -l NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINTS sda 8:0 1 14.4G 0 disk sda1 8:1 1 256M 0 part /boot/efi sda2 8:2 1 14.2G 0 part /var/log.hdd / zram0 252:0 0 7.7G 0 disk [SWAP] zram1 252:1 0 50M 0 disk /var/log zram2 252:2 0 0B 0 disk nvme0n1 259:0 0 953.9G 0 disk nvme0n1p2 259:3 0 953.6G 0 part /mnt/armbian-install.NQULbp/rootfs /mnt/tmp…
-
Just started using the thinker board, and got fed up with the OEM builds which brought me here. So I would like to thank everyone for all the hard work, Im sure it can't be easy fixing things blind! Cheers mates. As the Tinkerboard runs hot under load, i run a program that adjusts pwm to adjust fan speed. so I noticed right away when upgrading to 4.13.0 that both soc and gpu thermal zones had broken. I've tried 4.13.1 and 4.13.2 as well they are broken as well. 4.13.x all kick error messages into dmesg as well. root@Asus:/sys/class/thermal# uname -r 4.12.0-rockchip root@Asus:/sys/class/thermal# cat /sys/class/thermal/thermal_zone[1-2]/temp 32…
-
Reputation Points
- 21 replies
- 9.8k views
- 1 follower
-
-
Hi there, my new OPi5 with Armbian Bookworm Cinnamon mesa backoprted does not see my mPCIe SSD disk. Just got this: https://allegro.pl/oferta/nowy-superszybki-dysk-ssd-512gb-m-2-nvme-2242-9605598735 \ module, but it is not recognized by the system. Armbianmonitor output: https://paste.armbian.com/huhedogene lspci -v output: 0004:40:00.0 PCI bridge: Rockchip Electronics Co., Ltd RK3588 (rev 01) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0, IRQ 89 Bus: primary=40, secondary=41, subordinate=41, sec-latency=0 I/O behind bridge: [disabled] [16-bit] Memory behind bridge: [disabl…
-
Reputation Points
- 21 replies
- 9.2k views
- 1 follower
-
-
This was working on the tinker debian release, so I'm thinking this sis some kind of s/w issue. Is there something I'm missing on how to enable this? Thanks! Dave
-
Reputation Points
- 21 replies
- 20.8k views
- 1 follower
-
-
Hi, I got my RockPro64 board several days ago, and got *UPSTREAM* kernel (v5.1-rc5) and uboot (v2019.04) running on it using Archlinux ARM. (Sorry guys, I like upstream and Alarm more) The pull request for uboot-rockpro64 can be found here: https://github.com/archlinuxarm/PKGBUILDs/pull/1691 The upstream kernel is in the official core repor of Archlinuxarm (and that's why I like Alarm so much). It boots and runs mostly OK on full upstream kernel/u-boot setup. On rc-kernel it even has HDMI output working, but no hardware acceleration. I'm waiting panfrost as the open-source driver, so far it doesn't matter much as I don't …
-
Reputation Points
- 21 replies
- 10.8k views
- 1 follower
-
-
I must be doing something stupid. After having switched the branch "Multimedia" as M, no module are generated at all and I end up with error like: 🔨] ERROR: modpost: "dma_contiguous_default_area" [drivers/media/common/videobuf2/videobuf2-cma-sg.ko] undefined! [🔨] ERROR: modpost: "cma_release" [drivers/media/common/videobuf2/videobuf2-cma-sg.ko] undefined! [🔨] ERROR: modpost: "cma_alloc" [drivers/media/common/videobuf2/videobuf2-cma-sg.ko] undefined! Reading documentation to buld armbian, it only mention docker. I have been (last year) generating kernel on the machine itself (the orange pi 5 plus), this is not supported? thanks.
-
Reputation Points
- 21 replies
- 12k views
- 2 followers
-
-
Good evening, last week they changed the electric meter in my building, but in order to do so they cut the power, and my Tinkerboard (the first model, the one issued back in 2017, Asus first's SBC), that I use as my "Save for later, and never look at it again" network folder, suffered. It continued to reboot from some kernel panic, which I forgot to take note; but since it hadn't been upgraded to jammy, I took the opportunity to do it. Pluging in the uSD card (with the newly released jammy version, just downloaded here), power, and all (including the ethernet cord!!), first boot I have to create my user (which, for some reasons refuses to let me put my usual fr3d tag…
-
Reputation Points
- 20 replies
- 17.4k views
- 2 followers
-
-
I tried installing the OS using SD card and EMMC, but both failed. Orange Pi OS (Arch) on the official website ran normally. However, I installed focal_desktop_xfce or jammy_desktop_gnome from Ubuntu Image, but they all failed. After inserting the image into the SD card, the symptom is a black screen and no booting. Does it only support SSD? Because it is entered through a translator, there may be unnatural sentences. If you reply about that, I will get back to you.
-
Reputation Points
- 20 replies
- 37.3k views
- 2 followers
-
-
Hello, sorry for the tag (no odroid m1 tag) and if I'm in the wrong place. I downloaded the image Armbian_24.8.3_ordoidm1_jammy_current_6.6.51_kde-neon-kisak-desktop The image does not start without pressing rcy, so far normal. After flashing the mtd with armbian-installer and copying to SSD. The image still does not start. No display. After trying several things and without success, I decided to try an old image: Armbian_24.2.1_ordoidm1_jammy_current_6.6.16_xfce_desktop. I here rcy boot, install, copy to SSD, flash mtd and reboot. And it works. So I tried image 6.6.51 kde Again. But without flashing the mtd. And there it boot…
-
Reputation Points
- 20 replies
- 10.3k views
- 2 followers
-
-
Hi , I have an ASUS Tinker board S and I installed Armbian 5.54 on SD card. Then, I want work on eMMC drive of ASUS Tinker board S but, Armbian no detect it. How can I work with eMMC drive in Armbian ? Here my board info: http://ix.io/1j2Z Thanks, see you.
-
Reputation Points
- 20 replies
- 14.5k views
- 1 follower
-
-
Hi, last night a set of updates was installed and I rebooted the Orange Pi 5+ this morning. After the reboot I've seem to have lost the connection to the Orange Pi 5+, it is normally connected without a screen so I access it through SSH and the Open Media Vault web GUI. I've tried to connect it to a screen and then it seems to boot up just fine. Looking around with the screen connected it seems like the network cards aren't detected. My Linux skills are very limited but "sudo lshw -class network" shows nothing. One detail is that my router seems to detect it when it's connected and gives it the normal IP address that I've set in the 192.168.0.x ran…
-
For some reason the default UART utilized by uboot is uart2 on the Tinker. I haven't messed with it, and left it alone, but vendor uses UART1, and UART2 has a conflict with PWM pins. I'm in favor of changing, if anyone objects or has a more interesting idea, please discuss.
-
Reputation Points
- 20 replies
- 10.4k views
- 1 follower
-
-
Anybody else seen this ? Just upgraded and after a reboot Armbian wont boot into desktop. Xorg Looks good with no errors and I can see the kernel boot screen and log in via ssh. If I disconnect and reconnect the HDMI I get the following ... but nothing appears on the monitor [ 1733.805014] rockchip-vop ff900000.vop: [drm:vop_crtc_enable] Update mode to 1920x1080p60, type: 11 The screen remains on as it can detect the graphics display .... its just blank what display manager does Armbian use ?
-
Reputation Points
- 19 replies
- 10.2k views
- 1 follower
-
-
Hy, I miss a few options in the kernel current kernel: ARMBIAN 5.36 user-built Ubuntu 16.04.3 LTS 4.4.102-rockchip Thinkerboard I still need: 1) - disable HDMI audio so that it will no longer be displayed as a sound card under "aplay -l" deactivate "card 3: rockchipminiarm" same as with the image kernel update of Igor root@se:~# aplay -l **** List of PLAYBACK Hardware Devices **** card 0: Audio [USB Audio], device 0: USB Audio [USB Audio] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: Audio [USB Audio], device 1: USB Audio [USB Audio #1] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: Audio [USB Audio], device 2: US…
-
All images have build dates 1 month back. Several images seem to be based on "vendor kernel". What is happening? G
-
This will be a catch-all for HDMI-related things. Sep. 29, 2017 UPDATE First up is hotplugging in Mainline. Script/rule added to build system. Thank you @botfap for the script I am getting the system events triggered saying the HDMI is unplugged/replugged, (using udevadm -monitor) however nothing is happening in response to the events it would seem, the screen is still blank. I could hook a script to the event, but I'm not exactly sure what I would tell it to do... Any thoughts would be great, I'll be researching.
-
Reputation Points
- 19 replies
- 16.9k views
- 2 followers
-
-
I have a new Orange Pi 5 plus 16GB. Seems a pretty cool board and I want to replace my old Rpi 4 for Media center and Home assistant. I tried several distribution but can't get all my stuff working. The OPI5+ is attached to an onkio 5.1 receiver and the receiver go to a FHD TV. What is want to achieve is in Kodi 1. play video with GPU 2. libCec in Kodi to control Onkio volume 3. Passthrough audio Is there a working solution? Thank you
-
Reputation Points
- 19 replies
- 10.9k views
- 2 followers
-
-
Hi Guys, Here is my requirements for an electron app running Armbian OS on orangepi5 plus to support: Need GPU hardware acceleration to play video Need HDMI audio And possible NPU support. I really need help, I did lots of custom builds to find solution support all my above requirement and I found Armbian-unofficial_25.08.0-trunk_Orangepi5-plus_noble_edge_6.16.0-rc7_cinnamon_desktop.img. But my electron add crashes after running say 8 hrs or so, means it is not very stable for us [83833:0723/100030.362659:ERROR:ssl_client_socket_impl.cc(877)] handshake failed; returned -1, SSL error code 1, net_error -202 [83790:0723/101648.420086:ERRO…
-
Reputation Points
- 19 replies
- 6.8k views
- 1 follower
-
-
@Igor@amazingfate Can someone look at this issue please ? I am wondering if this is possibly affecting a large number targets or whether its just BananaPi-M7 / rockchip64 ? I have tried on another monitor also and am getting a black screen. On doing an `apt-get upgrade` on ssh terminal I happened to loose by HDMI display. AFAICT It looks like Ubuntu 'backgraded' gnome v46 (in Nobel release, and also in my older unofficial image) to v44. https://armbian.atlassian.net/jira/software/c/projects/AR/issues/AR-2702?jql=project %3D "AR" ORDER BY created DESC
-
Reputation Points
- 19 replies
- 4.6k views
- 1 follower
-
-
New OPI5+, unable to finish install because ethernet doesn't work. I haven't been able to figure it out and my searches turned up nothing. journalctl has the following messages: - hpptx phy lane locked! - rk_gmac-dwmac fe1c0000.ethernet error: no phy at addr -1 - stmmac_open: cannot attach to phy (error -19) I've checked power supply, cables, edited the interfaces file, and more , with no success. I have an Orange Pi 5 that I can swap as is in its place and everything works. Coupled with the fact that I couldn't find mention of the errors, I'm hoping that someone can help me before I give up and return the OPI5…
-
Reputation Points
- 19 replies
- 10.6k views
- 1 follower
-
-
In fact all versions since kernel 5.10.?? are broken and stop at u-boot. Better the Uboot shall dive down and never ever come up to bother us. Finally I managed to install bullseye by using a buster image, deactivtion kernel upgrade and removed the armbian.list from /etc/apt/ Then I changed source list from buster to bullseye apt update apt upgrade -y apt full-upgrade -y thats it. And i is really a shame to fool the community by uploading untested software.
-
Reputation Points
- 19 replies
- 9.4k views
- 1 follower
-
