Rockchip

Hi, I put the image on an SD card, but the machine fails to boot. Looking at the serial console, it just sits in a loop with the CPU constantly resetting after an exception. Serial console log is attached. Regards, Dianne. bootloop.txt

• 1

  Reputation Points

• 32 replies
• 14.1k views
• 1 follower

Hardware_hermit

August 28, 20242 yr

Hi. I'm running Armbian 22.05.3 Focal with Linux 5.10.60-rockchip on an Asus Tinker board. Can someone tell me how to enable SPI? I've seen instructions that say you should be able to run armbian-config and go to System > Hardware > spi-spidev, however the Hardware menu does not exist for me.

• 0

  Reputation Points

• 1 reply
• 2.7k views
• 1 follower

Serkan Polat

December 23, 20223 yr

Hi, Has anyone tried compiling zfs? According to google it should work out of the box? However, when I try to install, zfs dkms is saying that the module will not be compiled due to missing kernel headers. Fine, but where are the headers? I'm using a fresh install from https://www.armbian.com/rockpro64/ armbian-config - Software - headers_install does nothing, installing linux-headers-current-rockchip64 installs 22.05.4, not 22.08.1 that I have, and "compiling headers", whatever that might be, fails how do I get a matching kernel and headers, any version? root@rockpro64:~# dpkg -l | fgrep rockchip i…

• 0

  Reputation Points

• 3 replies
• 5.2k views

Aleksandar Ivanišević

September 14, 20224 yr

Hi, does anyone know how to get hardware video acceleration on orange 4 lts? I've looked around and I saw that rk3399's multimedia support can be enabled using the rk3399 legacy multimedia framework. But that requires a legacy buster image, which doesn't exist for the orange pi. I've tried to compile it myself, but it seems the compile script won't allow it. Is it really impossible to compile a legacy kernel for orange pi 4 lts?

• 1

  Reputation Points

• 4 replies
• 5.5k views

usual user

July 7, 20233 yr

Hello, I have set kernel.panic=180 in /etc/sysctl.conf to reboot on a kernel panic. Before, the system would keep running/hanging and I could read the errors if I turned on a attached display. Now the result is that the tinkerboard switches off. My expected result would be a reboot. Do I have to set something else? Or do I need to use watchdog? I am using the original tinkerboard with debian bullseye, kernel 5.15.48-rockchip.

• 0

  Reputation Points

• 2 replies
• 3k views
• 2 followers

tinker

August 26, 20224 yr

Hello! I would like to connect orangepi-4-lts to ili9341. I have new blank Armbian. $ uname -a Linux orangepi4-lts 5.15.52-rockchip64 #22.05.4 SMP PREEMPT I did overlay based on allwinner: /dts-v1/; /plugin/; / { compatible = "rockchip,rk3399"; fragment@0 { target = <&gpio1>; __overlay__ { ili9341_pins: ili9341_pins { pins = "PC7", "PD0"; function = "gpio_out", "gpio_out"; }; }; }; fragment@1 { target = <&spi1>; __overlay__ { status = "okay"; cs-gpios = <&gpio1 10 1>; ili9341: ili9341@0 { compatible = "ilitek, ili9341"; reg = <1>; pinctrl-names = "default"; …

• 0

  Reputation Points

• 4 replies
• 5.3k views
• 1 follower

Spartan

March 16, 20242 yr

Hi guys I have experienced a lot of system instability with the rockpro64 on debian and armbian as explained here: https://forum.pine64.org/showthread.php?tid=17083 and here: https://github.com/monero-project/monero/issues/8473 I think the solution lies in what the guys are discussing here: https://forum.pine64.org/showthread.php?tid=7387 Can someone please give me a clear set of instructions on how to create an image to boot with with lowered ddr clock frequency? Presumably from the files listed here?: https://github.com/rockchip-linux/rkbin/tree/master/bin/rk33 i.e.: files such as rk3399pro_ddr_…

• 0

  Reputation Points

• 1 reply
• 3k views
• 1 follower

joekhoobyar

October 25, 20223 yr

Hello. I downloaded Armbian 22.05 Jammy XFCE for Desktop. When I boot up my Orange Pi 4 LTS everything looks good. The first problem was a Wi-Fi 5G password (system dont recognize my password), only 2.4G works. The second problem (and the main problem) was a display - when X start, my display turn off (I have HDMI-connection). What I am doing wrong?

• 0

  Reputation Points

• 17 replies
• 9.2k views
• 1 follower

SET

August 27, 20224 yr

I have a question or at last 2. 1.Where to connect outside diode to thinkerboard . 2.How to turn off/on it from command line.

• 0

  Reputation Points

• 4 replies
• 3.3k views

JMSKK

August 8, 20224 yr

Im looking for a functioning, easy to install fan script for my RockPro64 installed with Armbian Jammy. Iv searched around and found a few unmaintained projects but Its not something iv ever done before so wanted to ask what others use. Although I do have some experience in the terminal I'm still relatively new to it so im hoping there is something with good step by step documentation. If anyone can assist Id be appreciative. Many thanks.

• 0

  Reputation Points

• 1 reply
• 3.2k views

joekhoobyar

October 25, 20223 yr

I am able to boot and install with an sd card, but am unable to get through first boot with the image on an emmc card. The failure on the emmc card is between /scripts/local-premount and /scripts/local-block it fails with gave up waiting for root file system device ... alert! UUID=ed78b... does not exist. dropping to shell! and I am at a busybox shell in (intramfs) I was wondering if booting from the emmc card was expected to work, or if anyone could remember what needs to be tweaked for the kernel to find the root filesystem on the emmc card. Cheers

• 0

  Reputation Points

• 2 replies
• 3.8k views
• 1 follower

calinb

August 10, 20224 yr

Good Morning, I'm using Libre renegade with armbian bullseye minimal. How can I change splash screen, replacing the armbian logo and 4 penguins, with a personal one? Has anybody done it eralier? Thanks in advance

• 0

  Reputation Points

• 0 replies
• 2.9k views

Fra

June 27, 20224 yr

I've got jammy running but I have a dsi display for the board and I'd like that to work (well the tp port too) with jammy. Looking at armbian config I see no setting for it. I know the display works fine as if I load an aryufan android image it works as it is set to use DSI by default. Does this kernel know about the DSI port? Do I have to build a custom kernel? If not then what boot env line will get it going?

• 0

  Reputation Points

• 14 replies
• 8.6k views
• 1 follower

dkebler

January 7, 20233 yr

Hi, i want to connect a MCP 2515 (the small modules for arduino) to my tinkerboard "Armbian 22.02.1 Hirsute with bleeding edge Linux 5.17.5-rockchip" I have enabled the SPI0 (and UART1) directly from armbian-config, I have disabled all the other peripherals. The connections are these: INT -------------> pin 32 CLK -------------> pin 11 SI ----------------> pin 13 SO --------------> pin 15 CS --------------> pin 29 in : /boot/armbianEnv.txt i add this: user_overlays=spi-mcp251x but it don't work and i can't find a guide for this board thanks a lot for your help

• 0

  Reputation Points

• 2 replies
• 3.2k views

MikeBaxter

June 8, 20224 yr

Hello, I would like to know more informations about this test made with the Asus XG-C100C Network Adapter or, generally, how to optimize the speed from a 10GbE PCIe Network Adapter in the RockPro64. Which version to use of Armbian and how to get that version to have so good performances? Which version of the Adapter driver to use? Were the drivers included in the Kernel or did you use the Asus driver recompiled? I would be very grateful if you will help me. Thank you.

• 0

  Reputation Points

• 1 reply
• 3.4k views

Tauro

January 21, 20233 yr

Hi! I've got a problem getting USB devices to work with Armbian 22.02.1 (Tinkerboard_bullseye_current_5.15.25) - fresh install, bare image without any modifications. While a simple usb keyboard would more or less work, plugging some devices seems to crash the built-in USB hub. This happens in "cold"-plug as in "hot"-plug, whereas there are slight differences. Booting up without any USB device attached: lsusb Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 002: ID 05e3:0608 Genesys Logic, Inc. Hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 002: ID 0bda:49f6 R…

• 1

  Reputation Points

• 4 replies
• 5k views
• 2 followers

jock

May 23, 20224 yr

anyone has it working???

• 0

  Reputation Points

• 5 replies
• 5.5k views
• 2 followers

t9097

July 4, 20224 yr

I use the spi0 of Renegade to drive a 3.5-inch touchscreen, both the lcd and touchscreen use the same spi0, but different "CS". If I don't touch, the display is ok. But when touch the screen, the display gets messed up, looking like the colors are misaligned starting from an offset value. Anybody has experience of it ? Thank you! (The first and second images get messed up as I touch on screen, the third image is ok as I don't touch.)

• 0

  Reputation Points

• 1 reply
• 2.9k views

DavidJS

May 17, 20224 yr

Hello, Armbian 22.02 images doesn't boot on rockpro64. I have tried: Armbian 22.02 Bullseye Armbian 22.02 Jammy XFCE It doesn't boot (not blinking white led). Previous builds works correctly: Armbian_21.08.1_Rockpro64_bullseye_current_5.10.60

• 0

  Reputation Points

• 10 replies
• 6.3k views
• 1 follower

2play

August 21, 20233 yr

Hello, After NanoPi R4S reboot, ethernet interface `enp1s0` disappeared. I tried soft reboot for several times but failed. If I shutdown the board and power plug out/in again, then `enp1s0` appears. I tested it several times and 100% same results. Any idea please? wg* is for vpn. please ignore them.

• 1

  Reputation Points

• 14 replies
• 8k views
• 1 follower

Igor

October 29, 20223 yr

Armbian 21.08.1 Bullseye with Linux 5.10.60-rockchip64 power supply OK, sdcard OK, installed OMV. For this reason ,https://forum.armbian.com/topic/20237-renegade-aka-roc-rk3328-cc-usb30-not-work-properly/ , I 'freeze' armbian kernal upgrades to make USB-disk work properly. But, Either poweroff in CLI or in OMV panal, it always reboot.

• 0

  Reputation Points

• 0 replies
• 2.4k views
• 1 follower

PP88PP

April 12, 20224 yr

hw ver 1.0 and 1.3, both dwmmc_rockchip ff500000.mmc:Unexpected interrupt latency. fw Offical Armbian 22.02.1 Bullseye. Power Supply 5.5V/3A + microUSB cable, currect Voltage over microUSB port is 5.1V when load 3A. TF card is Samsung EVO orange.

• 0

  Reputation Points

• 0 replies
• 3.3k views
• 1 follower

PP88PP

April 12, 20224 yr

I have two renegade SBCs, both of them flash armbian_22.02, one bullseye,another focal with xfce. Bullseye on hardware viersion v1.0, Focal on v1.3. They both can't discovery USB3.0 devices through USB3.0 which plug before boot. I installed openmediavault, setting up share folders on USB3.0 mobile disk, test it can work properly, then reboot. After reboot, Disk can't be discoveryed, light on disk bright but not flash. I keep waiting 30 minutes, no external disk be found. And, they can discovery devices on USB3.0 which plug after booted. But sometimes can't, only USB2.0 devices plug in USB3.0 port can be found. Example, I plug an USB3.0 di…

• 1

  Reputation Points

• 8 replies
• 7.7k views
• 2 followers

Shirish

September 3, 20224 yr

I know for sure that booting from an sd card and then using dd to write the uncompressed image to the emmc device isn't what works. I'm talking about Armbian_22.02.1_Pinebook-pro_focal_current_5.15.25_xfce_desktop.img here. Because that essentially bricked my PBP. I have the little adapter to connect the emmc to a usd slot, and using balena etcher to write to that isn't it either. the uboot in that image prevents booting from sd automatically as well, and i didn't find any uboot documentation that made it clear how to manually boot from sd, though i did hook up a serial console. This is what it said. The LED never turned green, the display flashe…

• 1

  Reputation Points

• 32 replies
• 24.7k views
• 3 followers

kgb

October 22, 20232 yr

Only "chirps and chips" come through during extended playback. Only hdmisound device is affected, not analog. Duplicate of improperly "resolved" thread Armbian 22.02 Bullseye Kernel 5.15.25-rockchip64 Armbian 22.02 Bullseye Kernel 5.16.16-rockchip64 working in 5.10.60-rockchip64 steps to reproduce: aplay -D plughw:1,0 /usr/share/sounds/alsa/Front_Right.wav dmesg | grep es83 [ 10.077582] es8316 1-0011: Failed to get IRQ 0: -22 card 0: Analog [Analog], device 0: ff890000.i2s-ES8316 HiFi ES8316 HiFi-0 [ff890000.i2s-ES8316 HiFi ES8316 HiFi-0] Subdevices: 0/1 Subdevice #0: subdevice #0 card 1: hdm…

• 0

  Reputation Points

• 2 replies
• 3.5k views
• 1 follower

hege

May 30, 20224 yr

Hello all, First of all, thanks for the Armbian project, love it so far, but had a slight problem with a kernel upgrade. To be honest, I forgot how I installed Armbian since it was a while ago, but I've been using this for a year or so. I saw that unattended-upgrades installed a new kernel and I should reboot for this change. I was a bit apprehensive, but went ahead and rebooted. The NanoPI R4S didn't come back up. I attached a serial console to debug. The console showed that the initramfs was read successfully from the SD card, but then tried to mount to root filesystem by UUID and failed (it kept saying it tried to run /boot/local-block and event…

• 1

  Reputation Points

• 17 replies
• 11.7k views
• 1 follower

Michiel Holtkamp

August 8, 20224 yr

Hello, I've used the Tinkerboard S (Rockchip RK3288) with the Armbian images available for download (https://www.armbian.com/tinkerboard/). Currently, the /dev/ttyS4 serial port is not available unless CONFIG_SERIAL_8250_NR_UARTS=5 when the Linux kernel is built since the serial ports are populated in /dev starting with /dev/ttyS0 and the last serial port to be populated is /dev/ttyS4. By default, CONFIG_SERIAL_8250_NR_UARTS=4. Some additional kernel settings are required to ensure that all of the available serial ports can be utilized. Moreover, I had to activate I2C4 in the device tree overlay using the Armbian configuration utility (https://docs.armbi…

• 1

  Reputation Points

• 6 replies
• 4.8k views
• 2 followers

nkinar

March 27, 20224 yr

Hello I cannot enable the Bluetooth on Tinkerboard device. Tried latest image, fresh install. I've opened the question on StackOverflow: https://superuser.com/questions/1698728/cannot-enable-bluetooth-on-tinkerboard-armbian It contains technical details. The latest what I've found so far is it could be related to Kernel compilation flags: # Extract from the /boot/config-5.10.60-rockchip CONFIG_SERIAL_DEV_BUS=y CONFIG_BT_HCIUART_3WIRE=y CONFIG_BT_HCIUART_SERDEV=y # CONFIG_BT_HCIUART_RTL - is not set # CONFIG_SERIAL_DEV_CTRL_TTYPORT - is not set I tried to download and compile the kernel and stuck. Basically I do…

• 0

  Reputation Points

• 14 replies
• 6.3k views

ning

November 7, 20223 yr

I was trying to enable i2c on my RockPro64, and when looking at the documentation in the overlay directory, it states this: rockchip (Rockchip) ### Provided overlays: - i2c7, i2c8, pcie-gen2, spi-spidev, uart4, w1-gpio ### Overlay details: ### i2c7 Activates TWI/I2C bus 7 I2C7 pins (SCL, SDA): GPIO2-B0, GPIO2-A7 GPIO1-C5, GPIO1-C4 ### i2c8 Activates TWI/I2C bus 8 I2C8 pins (SCL, SDA): GPIO1-C5, GPIO1-C4 Note that the "GPIO1-C5, GPIO1-C4" from i2c8 is accidentally included on the i2c7 pins line. I would submit a PR for this change, but ... I'm not sure where this document actually lives, and it's not easy to figure out. …

• 0

  Reputation Points

• 6 replies
• 4.9k views
• 1 follower

ak_hepcat

February 15, 20224 yr

I've burned the latest Focal image onto Renegade board. Everything works fine except rebooting it via command. Once the reboot is entered, the console log showed it tried to reboot but stuck with the following info. The above Armbianmonitor is a zip file, please download it and save as zip file then unzip to get the detail log. I guess it was due to issue in dtb file but has no clue. Is there any genius can help on this? [ 97.418882] watchdog: watchdog0: watchdog did not stop! [ 97.672510] reboot: Restarting system INFO: PSCI Power Domain Map: INFO: Domain Nod State ON (0x0) INFO: Doma parent_node 0, State ON (0x0) e …

• 0

  Reputation Points

• 2 replies
• 3.4k views

Gorbovsky

March 9, 20233 yr

U need ixgbe to run my Intel X550T 10G Ethernet NIC. That module seems to be a part of linux-modules-$(uname -r) package. My kernel version is 5.10.60-rockchip64. However, I do not have linux-modules-5.10.60-rockchip64 available via apt. # apt install linux-modules-$(uname -r) Reading package lists... Done Building dependency tree Reading state information... Done E: Unable to locate package linux-modules-5.10.60-rockchip64 E: Couldn't find any package by glob 'linux-modules-5.10.60-rockchip64' I have apt downloaded linux-modules of some greater kernel release to make sure it provides ixgbe.ko. It does: # apt install --download-…

• 1

  Reputation Points

• 8 replies
• 5.1k views

Aleksandr

November 22, 20214 yr

Hi! I have installed Armbian buster 21.08.3 and can`t discover any externally connected i2c devices, such as rtc or ssd1306 Any ideas? i2cdetect -l i2c-2 i2c rk3x-i2c I2C adapter i2c-0 i2c rk3x-i2c I2C adapter i2c-5 i2c rk3x-i2c I2C adapter sudo i2cdetect -y 0 0 1 2 3 4 5 6 7 8 9 a b c d e f 00: -- -- -- -- -- -- -- -- -- -- -- -- -- 10: -- -- -- -- -- -- -- -- -- -- -- UU -- -- -- -- 20: -- -- -- -- -- -- -- -- …

• 0

  Reputation Points

• 1 reply
• 2.7k views
• 1 follower

Werner

November 10, 20214 yr

Issue: The node /proc/device-tree/compatible contains the board name roc-rk3328-cc, but the dtb in /boot/dtb/rockchip/ is named rk3288-roc-cc. Armbian-config queries this node when running "System settings / Dtc" and then looks for roc-rk3288-cc.dtb, but cant find it.

• 0

  Reputation Points

• 2 replies
• 3.9k views

tparys

October 26, 20214 yr

Using the 5.xx kernal I have been changing the eth0 MAC address at /etc/NetworkManager/system-connections/ 'Wired connection 1.nmconnection'. This has changed a bit as the versions progress - but version Armbian 21.08.2 Focal / Linux 5.14.5-rockchip64 has now moved the "wired ..." file to the /run/NetworkManager/system-connections/ and suspect the file is recreated at every boot (edits do not stick). I have tried to set MAC at /boot/armbianEnv.txt and in the eth config file. None work. Any ideas as to how to set the MAC address - and is it now even possible?.

• 0

  Reputation Points

• 5 replies
• 6.6k views
• 2 followers

NaK

May 30, 20233 yr

Hello, I installed Armbian Hirsute xfce bleeding edge kernel 5.13.y on my RockPro64 4GB and updated it right after that. After restarting after the update, ethernet doesn't work anymore. (Wifi connecting icon is shown and no connection to ethernet) dsmesg says that the link is up. armbianmonitor: https://paste.ubuntu.com/p/9Yz8SJVrzS/ apt/history.log: https://paste.ubuntu.com/p/GQbfZp3Xch/ For apt history only the last two operations seem relevant. I assume the previous ones are made by whoever/whatever created the image.

• 1

  Reputation Points

• 5 replies
• 4.3k views
• 2 followers

ScottP

September 24, 20215 yr

Hi, I'm not sure if it is a bug as by board seems to work correctly, however I thought I should post it. In the latest version (5.10.60-rockchip64) I'm getting a few errors in dmesg: debugfs: Directory 'power-domain' with parent 'pm_genpd' already present! I hadn't seen these errors in the previous version (5.10.43) Logs are here: http://ix.io/3yY5 Regards,

• 0

  Reputation Points

• 0 replies
• 2.3k views

Badger

September 15, 20215 yr

Hi. I've got a ROC-RK3399-PC SBC with a JMB585 PCIe to SATA extension card. Unfortunately PCIe always doesn't work on boot, whether it is in u-boot or kernel, with `PCIe link training gen1 timeout` error. Just as the following log: However, after I manually run these commands, PCIe seems working. ```modprobe -r pcie_rockchip_host modprobe pcie_rockchip_host ``` Kernel log: Does anyone have any idea about what is going on? Thanks in advance.

• 0

  Reputation Points

• 9 replies
• 14.5k views
• 4 followers

Igor

December 19, 20232 yr

After last apt upgrade (v21.05.4), lightdm on a RockPro64 does not start anymore. rockpro64:~:# systemctl status lightdm.service ● lightdm.service - Light Display Manager Loaded: loaded (/lib/systemd/system/lightdm.service; indirect; vendor preset: enabled) Active: failed (Result: exit-code) since Sun 2021-06-20 16:13:01 CEST; 21min ago Docs: manlightdm(1) Process: 1877 ExecStartPre=/bin/sh -c [ "$(basename $(cat /etc/X11/default-display-manager 2>/dev/null))" = "lightdm" ] (code=exited, status=0/SUCCESS) Process: 1880 ExecStart=/usr/sbin/lightdm (code=exited, status=1/FAILURE) Main PID: 1880 (code=exited, status=1/FAILURE) Ju…

• 1

  Reputation Points

• 7 replies
• 13.1k views

jrullan

July 23, 20215 yr

Hello, yesterday i got a powerloss , and my Asus tinkerboard got shutdown. i think i had some updates installed but not yet rebooted the Tinkerboard never restarted again. i first suspected a crashed Emmc disk but i did the following tests and got to the conclusion that Armbian for Tinkerboard is currently broken - restored a past complete image to either SD or Emmc : boots ok. - shutdown then unplug/replug power : OK - update with apt-get update + apt-get upgrade => reboot OK, but shutdown, and then never restart, bricked. shutdown down either with desktop or command line tested also with a second Tinkerbo…

• 1

  Reputation Points

• 14 replies
• 11k views

Igor

May 30, 20215 yr

I have a brand new Tinker Board S with the latest Armbian buster installed. I have hostapd set up for the board to be a WiFi access point. I can see the SSID on my Windows and mobile devices but when I connect, hostapd tells me an error code 8 and that the device is disassociated. I don't think this is the issue as the kernel panics at exactly the same time. Here is the output from dmesg: [ 101.279674] ------------[ cut here ]------------ [ 101.284852] kernel BUG at mm/slub.c:4117! [ 101.289337] Internal error: Oops - BUG: 0 [#1] PREEMPT SMP ARM [ 101.295860] Modules linked in: fuse rtc_ds1307 xt_state xt_conntrack nft_counter nft_chain_nat xt_MASQUERADE n…

• 0

  Reputation Points

• 8 replies
• 7.2k views
• 1 follower

Igor

March 29, 20215 yr

I'd like some help please. The ethernet device naming seems inconsistent. Sometimes one interface comes up as eth0 and sometimes as eth1, and sometimes not at all. The enp1s0 interface seems to reliably come up, but not with the right config (sometimes it uses the config for enp1s0 and sometimes for eth0). I am trying to assign status IP addresses (on different networks) to each interface, but because of the unreliable bringup of the network interfaces, I can't get a config that starts up correctly and consistency on reboots or cold boots. As a test I ran the friendly-core-lite-focal from FriendlyCore and it does not have this i…

• 1

  Reputation Points

• 5 replies
• 5.1k views

poddmo

September 8, 20233 yr

Hello everyone, due to a project I'm working with the Friendly Elec Nanopi R4S board for which I've to use the i2c bus to read data from a sensor. Unfortunately I've not been able to access it, since the system does not recognize it. I tried with different configurations using the /boot/armbianEnv.txt file with no results, however the i2c ports are enabled. To rule out functionality problems in the sensor, I connected it to other boards (e.g. nanopi Neo3 using Armbian) without problems. Do you have any idea what could be the cause of this problem? Thanks!

• 0

  Reputation Points

• 1 reply
• 4.4k views

mef1k

October 3, 20224 yr

Hi, New build, Armbian_21.05.0-trunk_Tinkerboard_focal_current_5.10.22_xfce_desktop.img. The build finished ok and the image after flashing is working just fine, but.. unfortunately there is no /boot/dtb/overlay folder and of course none and its .dtbo entries are found anywere. Am I missing something ? Is the latest build system broken for Tinkerboard ? Do I need to specify something during the build process menu ? /PS Just checked with the Armbian ready-made provided image for Tinkerboard, the Armbian_21.02.1_Tinkerboard_focal_current_5.10.12_desktop.img.xz and Armbian_21.02.3_Tinkerboard_…

• 0

  Reputation Points

• 3 replies
• 4.8k views

Christos

March 11, 20215 yr

https://justpaste.it/5jszu I tried with I2C connected and disconnected between screen and tinkerboard. No change. (See below, looks like i2c-3/3-0045/tinker_mcu_bl is missing ). I checked around that area and tinker_mcu_bl is missing, but folder 3-0045 exists with lots of files in there. (bottom of the post) From dmesg I also see that i2c had a failure (ret = -6). (see next paste) Looking forward I see that -6 is no device found on i2c bus (assuming that's correct?). Does anyone know if brightness control works? [ 2.446829] tinker-mcu: tinker_mcu_probe: address = 0x45 [ 2.446843] tinker-mcu: send_cmds: 80 …

• 0

  Reputation Points

• 2 replies
• 5k views

q4a

September 10, 20215 yr

On a fresh Buster Minimal install, what is required to get armbian-config fully functional? apt install armbian-config 'works' but some functions don't, for instance it fails setting the locale as dpkg-reconfigure errors as usr/lib/armbian-config/jobs.sh line 839 dpkg-reconfigure : command not found EDIT: In armbian-config I selected 'full firmware package' and rebooted, time zone settings now work. Was odd that the welcome page said run armbian-config (beta) but it had to be installed manually via apt.

• 0

  Reputation Points

• 7 replies
• 7.6k views
• 1 follower

Technicavolous

March 6, 20215 yr

My new RockPi-E works well except for a reboot. Have to power it off/on to recover. Is it a known problem? Any solution/workaround? Thanks for your time Chris

• 0

  Reputation Points

• 1 reply
• 3.3k views

Werner

March 3, 20215 yr

Hi I would like to use the UART on physical pins 3 and 5 (https://wiki.radxa.com/RockpiE/hardware/gpio) Does anybody know how to activate it? There is an overlay uart4 but it doesn't do what I expected it to do :-) Thanks Chris

• 0

  Reputation Points

• 1 reply
• 3.2k views

Werner

February 14, 20215 yr

Hey folks... We are trying to use a DHT22 sensor on rockpro64 using armbian (buster)... Is there something we need to know about GPIO pin ? We are trying to compile and use this code as a starter... https://github.com/ayufan-pine64/dht22-pine64.git But we got a segfault when using it... thanks

• 0

  Reputation Points

• 1 reply
• 2.5k views
• 1 follower

Werner

February 8, 20215 yr

Hey guys, i want help to install anydesk in tinker board with armbian focal

• 0

  Reputation Points

• 1 reply
• 3.6k views
• 1 follower

Werner

January 27, 20215 yr

I just download Armbian_20.11.6_Tinkerboard_bionic_legacy_4.4.213_desktop.img.xz flased it on sd card with balenaEtcher, tried to boot and got error: So. I can't do my first login.

• 1

  Reputation Points

• 8 replies
• 4.8k views

Igor

January 20, 20215 yr

Hello! First, and foremost, how issue looks like: https://imgur.com/a/ZrPUi9t Initially I noticed this issue with Dell UP3017 (2560x1600) on Libre Computer ROC-RK3399-PC (post). However later I noticed this on fresh Armbian installations on NanoPC-T4 too (post). Later on I found that old Armbian installations on NanoPC-T4 is unaffected, probably because of older uboot (something from last Armbian 5.xx days) that already flashed on eMMC. Yesterday I compared a couple of old Armbian images (initially that was posted here) Armbian_20.05.7_Nanopct4_focal_current_5.4.49.img - issue is not reproducible, Armbian_20.08.2_Nanopct4_focal_current_5.8.6.img …

• 1

  Reputation Points

• 7 replies
• 7.8k views
• 1 follower

RussianNeuroMancer

February 27, 20215 yr

Hi all, I'm using for the Tinkerboard the mem freeze and resume methods; in particular using by the pins near the video connector (and a button) to resume the board. Is it possible to use other pins to achieve that? Thanks!

• 0

  Reputation Points

• 0 replies
• 2.7k views

SteMMo

January 11, 20215 yr

Hi everyone. I’ve been facing some issues with my RockPro64 lately, running on a dedicated version of Ambian for this sbc. Earlier, I was using a USB Bluetooth module with it for playing audio on my speakers (via Logitech Bluetooth adapter), and it worked perfectly fine. I wanted to save some USB ports so I decided to replace the module with a ROCKPro64 1*1 Dual Band WIFI 802.11 AC/BLUETOOTH 5.0 MODULE. But ever since I’ve done that, the audio quality is choppy and inconsistent. Receiver and transmitter are located closely, so I don’t think it’s a signal issue. It seems like a hardware or a software issue, but I’m not sure what could it be. I’d appreciate any help with …

• 0

  Reputation Points

• 1 reply
• 3k views
• 1 follower

raphj

October 2, 20224 yr

Hi everyone, I tried the 20.11.3 version of Armbian, I have manually updated the SPI with U-boot using armbian-config (after an apt update && apt upgrade), but it doesn't start from a PCIe NVME SSD :-/ Is there something that I have missed? Any idea is more than welcome ! Here is my serial - USB console output: Spoiler $ picocom -b 1500000 -r -l /dev/tty.usbserial-144310 picocom v3.1 port is : /dev/tty.usbserial-144310 flowcontrol : none baudrate is : 1500000 parity is : none databits are : 8 stopbits are : 1 …

• 1

  Reputation Points

• 10 replies
• 7.4k views
• 1 follower

denni_isl

February 7, 20215 yr

Hello, I own a RockPro64 and I'm using Armbian Legacy Buster 4.4.213-rockchip64. Everything mostly works, although I've had a pretty annoying issue. Reboot just doesn't work. Every time I do a 'sudo reboot' (or any equivalent for that matter, as for example 'sudo shutdown -r now') it doesn't work. Although it apparently reboots, the TV monitor to which my box it's connected via HDMI lose connection and all, nothing actually happens. Both the red and the white leds of the RP64 turn on and keep on all time (instead of just one of them blinking, as expected) and then it will work only if I poweroff and on again, either by unplugging the power cable or…

• 1

  Reputation Points

• 25 replies
• 11k views
• 3 followers

JMCC

January 6, 20215 yr

IT'S FINALLY HERE... THE OFFICIAL ROCKCHIP-LEGACY MULTIMEDIA INTEGRATION After two years of using a separate script to enable the multimedia features in RK3288/3328 Legacy Kernel, the whole framework has been incorporated to the official Armbian packaging system. The choice distro for this integration is Debian Buster (see FAQ at the end of this post about the reasons). I. Installation Download a Armbian Buster Legacy Desktop image for your board, and install it with the standard Armbian method. Install the complete multimedia solution with sudo apt update && sudo apt upgrade sudo apt install media-buster-legacy…

• 1

  Reputation Points

• 112 replies
• 99.6k views
• 9 followers

zoomer

September 22, 20251 yr

Board is RockPro64, legacy kernel - 4.4.213-rockchip64. The issue is this: [ 1451.681339] ohci-platform fe3a0000.usb: frame counter not updating; disabled [ 1451.681972] ohci-platform fe3a0000.usb: HC died; cleaning up [ 1451.682516] usb 8-1: usbfs: usb_submit_urb returned -19 [ 1451.682569] usb 8-1: USB disconnect, device number 2 It happens only on the USB2.0 ports with different keyboards, mice, custom USB HID device, webcam. The other 2x USB 3.0 ports are working fine with the same devices. Tried fixes so far - turning usbcore.autosuspend option off, adding usbhid.quirks for every device. extraargs=usbcore.autosuspend=-1 usbhid.qu…

• 0

  Reputation Points

• 1 reply
• 3.5k views

Pencheff

December 19, 20205 yr

I got wierd screen blinking after update kernel from 5.8.18-rockchip to 5.9.14-rockchip. Here is blurry video with screen blinking. My screen resolution is 1600x900 and i'm using HDMI-to-VGA adapter. All was working fine with kernel 5.8.18-rockchip. I still can connect to sbc via ssh, so I checked kernel version, install old one and blinking gone: q@tinkerboard:/var/cache/apt/archives$ uname -a Linux tinkerboard 5.9.14-rockchip #20.11.3 SMP PREEMPT Fri Dec 11 22:00:29 CET 2020 armv7l armv7l armv7l GNU/Linux q@tinkerboard:/var/cache/apt/archives$ dpkg-deb -I linux-image-current-rockchip_20.11_armhf.deb new Debian package, version 2.0.…

• 0

  Reputation Points

• 1 reply
• 3.6k views
• 1 follower

jock

December 15, 20205 yr

hi all, I am wondering if there's any reason that CEC is not built into legacy kernel for RK3399. In https://github.com/armbian/build/blob/master/config/kernel/linux-rk3399-legacy.config, module dw-hdmi-cec is not enabled. # CONFIG_DRM_DW_HDMI_CEC is not set If no special reason, I can make a PR for this. Thank you!

• 0

  Reputation Points

• 1 reply
• 4.1k views

Igor

December 13, 20205 yr

Does anyone know the status of getting display to work over USB-C on Pinebook Pro? Thanks!

• 0

  Reputation Points

• 2 replies
• 3.1k views

lanefu

December 5, 20205 yr

Hello, I have been experimenting with the bluetooth audio on my tinkerboard. The issue is both present on the last rockchip-next (4.1x I think) and the rockchip-current 5.8.18 kernel. I am using bluez and bluealsa. The problem is specific to the onboard bluetooth, using an external bluetooth dongle (a cheap and old CSR Bluetooth 3.0 dongle from China) works as expected, I can even send audio to multiple devices simultaneously (quality is very bad, but thats a bandwidth problem). As long as I just connect one bluetooth audio device everything is fine. I can have multiple paired, but disconnected, devices and as long as I connect and p…

• 0

  Reputation Points

• 1 reply
• 3.3k views

Werner

December 4, 20205 yr

I wanted to share 2 custom overlays I've created and tested for the RockPi E to enable UART1 and OTG via the GPIO. Create file rockchip-uart1.dts /dts-v1/; / { compatible = "rockchip,rk3328"; fragment@0 { target-path = "/serial@ff120000"; __overlay__ { pinctrl-0 = < 0x23 >; status = "okay"; }; }; }; Create file rockchip-otg.dts /dts-v1/; / { compatible = "rockchip,rk3328"; fragment@0 { target-path = "/usb@ff580000"; __overlay__ { dr_mode = "otg"; }; }; }; Install and enable overlays: sudo armbian-add-overlay rockchip-uart1.dts sudo armbian-add-overlay rockchip-otg.dts

• 1

  Reputation Points

• 8 replies
• 9.1k views

ich777

March 12, 20242 yr

Hi, I'll install OpenMediaVault and Nextcloud on a tinkerboard and I would like to know if there is any advantage on run system on SATA / USB in this case and if it is possible to do this on tinkerboard since it was not clear for me on the docs. Thank you

• 0

  Reputation Points

• 1 reply
• 3.6k views
• 1 follower

xAda

January 26, 20233 yr

https://wiki.friendlyarm.com/wiki/index.php/NanoPi_R4S I am really excited about this board. https://www.cnx-software.com/2020/11/12/nanopi-r4s-headless-rk3399-sbc-features-up-to-4gb-ram-dual-gigabit-ethernet-usb-3-0-ports/ The first comments below this blogpost are also not so bad besides the fact that USB-C is power-in only.

• 1

  Reputation Points

• 41 replies
• 34.7k views
• 7 followers

dolphs

July 24, 20224 yr

Hi. I would like to download last armbian image for my Asus tinkerboard, but all download links broken: https://www.armbian.com/tinkerboard/ Can you fix that? I found Armbian_20.08.1_Tinkerboard_focal_current_5.8.6_desktop.img.xz here: https://armbian.tnahosting.net/archive/tinkerboard/archive/ Is that latest one?

• 0

  Reputation Points

• 2 replies
• 3.5k views

q4a

November 11, 20205 yr

Hi all, I am a newbie here. Is there a way to install ZFS on RockPro64 RK3399 with the latest Armbian release (doesn't matter if it is bionic, buster or focal)?

• 0

  Reputation Points

• 7 replies
• 5.4k views
• 1 follower

joekhoobyar

October 25, 20223 yr

Hi, since i have a Asus tinkerboard incoming i was wondering if anyone knows if the "generic" arm64 distro will work this board. Its based of the rockchip RK3288 SoC The support pages states that the board supports debian, but since i dont need a UI ect (im going to use it headless) i dont need the board to load a ui into memory and wanted to use a normal build instead of the TinkerOS Please note, my knowledge of the inner workings of *nix is quite limited, so if my question is to generic or imprecise i apologize.

• 0

  Reputation Points

• 1 reply
• 5.1k views

Igor

October 11, 20206 yr

I was able to install an ebay 18650 UPS on my ROC-RK3328-CC, and found out in the instructions that it also has an RTC Module. I would like to utilize that feature, if possible, but I am not entirely sure how to go about it. I have used the armbian-config to enable i2c7, and... that's pretty much as far as I got. Viewing the instructions under "How to setup and check the RTC module:" https://wiki.52pi.com/index.php/UPS_(With_RTC_%26_Coulometer)_For_Raspberry_Pi_SKU:_EP-0118 The instructions call to use modprobe i2c-bcm2835 however, it doesn't appear that my copy of Armbian 20.08.7 Buster has this driver. Is there another way to setup an…

• 0

  Reputation Points

• 2 replies
• 4.4k views

TonyMac32

October 19, 20205 yr

HI all, first of all, I found thi sissue adopting a new board to the CSC tree, done by @balbes150. As it seems to be a problem of RK3288 in general, I post here, in case please move the topic to the approriate place. I have a JLD076 board, and started adjusting the DTS to the schematic. According to the schematic, and the TRM of RK3289, there is a maximum number of 160 GPIOs. This is also the number I get from my schematics. So I expected th get suitable number of pins from gpioinfo (bank:number 0:19, 1:4, 2:18, 3:28, 4:26, 5:12, 6:19, 7:24, 8:10). Instead, I get listed (0:24, 1...7:32, 8:16). I tried now to set ngpios for the &…

• 0

  Reputation Points

• 0 replies
• 3.4k views

mboehmer

October 5, 20206 yr

Hi there! I am trying to set up communication between an Attiny85 and my RockPro64 over UART (running Armbian, kernel `Linux rockpro64 5.8.1-rockchip64 #20.08 SMP PREEMPT Mon Aug 17 08:17:08 CEST 2020 aarch64 aarch64 aarch64 GNU/Linux`). The issue is that I can't connect to the serial port: rock64@rockpro64:~$ sudo picocom -b 115200 /dev/ttyS4 picocom v3.1 port is : /dev/ttyS4 flowcontrol : none baudrate is : 115200 parity is : none databits are : 8 stopbits are : 1 escape is : C-a local echo is : no noinit is : no noreset is : no hangup is : no nolock is : no send_cmd is : sz -vv receive_cmd is : rz -vv -E imap is …

• 0

  Reputation Points

• 5 replies
• 6.3k views
• 1 follower

antonlyap

October 4, 20206 yr

I've been (trying) to move the Tinker and MiQi u-boots to 2020.07, however if I use any of the following: A MiQi, A Tinker S an image for a Tinker S an image for a Tinker on a Tinker S I get stuck in the initramfs busybox with it telling me the filesystem is toast. The only 2020.07 combo I've gotten to boot is the Tinker with the non-eMMC supporting u-boot. As for clues, I haven't found any, the u-boot source code is of course very well organized for debugging purposes :lol:. If anyone has an idea about what could be going on with this let me know, I'm shelving the effort to think about other stuff.

• 0

  Reputation Points

• 2 replies
• 5.2k views

ning

June 17, 20224 yr

My goal is to get OMV5 running on my RockPro64 (previously running OMV4 on an Ayufan image). I'm using this guide here from over on the OMV forum which suggests that Buster Server is the only thing that will work; this is based on the 4.4 kernel, and the suggested alternate of Buster Minimal is not present. I've tried downloaded from multiple locations and cannot get the SHA to match. The 256 per Checksum utility is 760BD8FA51316D07E875D5B8687E837C8C00070E68F44B8B413C76EC217C606B while the file from the Armbian download site is 3ddc7bc3e47bc39a9a9bed6109d35ca712bd34a6206121d37814ca8faf4b8798 If i try to flash the image to SD and boot device fails …

• 0

  Reputation Points

• 1 reply
• 3.1k views

Igor

September 22, 20206 yr

Please, does the latest Armbian support setting the resolution on boot? I want to use this resolution in my SDL2 based app, so things like randr does not help me. Thank you very much.

• 1

  Reputation Points

• 1 reply
• 3.7k views

Wizzard

September 20, 20206 yr

Hello, using the image provided at https://www.armbian.com/rockpro64/ the board works when booted via uSD card but not via MMC. There appears to be no device mode USB drivers installed. I pulled the kernel sources with `armbian-config` and compiled them myself making sure to select dual-mode support for the DWC2 and DWC3 drivers. The kernel boots after install, but I still see nothing in /sys/class/udc and am unable to see any dwc2/3 drivers (save dwc2_pci and some dwc3 i3c drivers). I'm able to load libcomposite, the configfs driver, but that does not pull in a USB device mode driver. I'm unable to attach armbian monitor status right now but will update my po…

• 0

  Reputation Points

• 3 replies
• 7.2k views
• 1 follower

flatmax

April 12, 20224 yr

Good day, Dear! How to untag vlan_x to eth0 interface and untag vlan_y it to eth1 and wlan0 and enable igmp v2 support for iptv? Access Point created with armbian-config. Thank.

• 0

  Reputation Points

• 0 replies
• 3k views

ole.g

September 6, 20206 yr

Starting a new thread after this one solved my question: https://forum.armbian.com/topic/15044-how-to-re-format-and-remount-and-redo-lvm-volume-on-ssd/?tab=comments#comment-107672 but taking care of those things wasn't the root cause. it turns out the drive wasn't unmounted cleanly after accidentally unplugging the power cable from the board. I had a drive setup using: pvcreate /dev/nvme0n1 vgcreate rockpro64 /dev/nvme0n1 lvcreate -n <name> -L 500g rockpro64 then i formatted like this: mkfs.ext4 /dev/rockpro64/name but then i accidentally unplugged the power source while i got my system up and running it wasn't cleanly unmounte…

• 0

  Reputation Points

• 0 replies
• 2.4k views

kkdao

September 1, 20206 yr

Hey All, I am running a rockpro64 and updated my kernel to 5.7 (linux-image-current-rockchip64 package), but I am not able to run ZFS any longer because ZFS/0.8.4 does not support 5.7 kernel and ZFS/2.0.0rc1 dkms gives me a build failure with linux-image-current-rockchip64 v20.08 (symbol "__stack_chk_guard" is undefined). I was able to build ZFS/2.0.0rc1 with linux-image-current-rockchip64=20.05.7. I am not able to downgrade my kernel because the apt-cache only shows the latest version of linux-image-current-rockchip64 available. Any suggestions on where I can get the old linux-image-current-rockchip64 package (v20.05.7)? Thanks in advance guys, lo…

• 0

  Reputation Points

• 3 replies
• 5.2k views

RussianNeuroMancer

September 2, 20206 yr

I followed a guide to install a system on my Rockpro64 but something happened where I had to reinstall it. However, when I reflashed the ubuntu server image and tried re-installing the system it got an error pertaining to one of my disk volumes. So I'm wondering how to re-format and remount and redo the LVM volume my SSD. Any help or tips would be greatly appreciated!

• 1

  Reputation Points

• 17 replies
• 8.9k views

kkdao

September 1, 20206 yr

Hi! I just booted Armbian_20.08_Rockpro64_focal_current_5.7.15.img via sdcard , but HDMI output seems to stop after "Starting Kernel". Just after that I see some yellow/black vertical lines on my monitor and then the screen goes black, no more HDMI input on the monitor. Logging into Armbian on the RockPRO then works fine via ssh, can do the setup, update etc. So it looks like a problem with HDMI output? Anyone ideas how to solve this? Would like to have console terminal access via HDMI as last resort Thanks in advance! p.s. Just tried the Armbian_20.08_Rockpro64_focal_current_5.7.15_desktop which seems to have t…

• 1

  Reputation Points

• 7 replies
• 7.7k views

rik-shaw

November 17, 20205 yr

As a warning: I have a RockPro64 that was initial setup using the Armbian 20.02.1 buster desktop image (using the 5.4.20 kernel). Over the past few months, I have accepted each minor release of Armbian up to the 20.05.7 release with a 5.4.49 kernel Yesterday, I installed the 20.08 upgrade with 5.7.15 kernel, and the board failed to boot. I have only just got it working again. (I had to restore the kernel and supporting files from a recent backup, and restore symlinks in /boot). I don't know the root cause. I have ordered a second MicroSD card so that I can try booting from a fresh 20.08 image, and I will report back on what happens. In …

• 0

  Reputation Points

• 48 replies
• 25.3k views
• 1 follower

MEMEs

November 17, 20205 yr

Downloaded the image file Armbian_20.08_Rockpro64_buster_current_5.7.15_desktop.img. Using the Etcher utility, I burned the image to the SD Card. Installed SD Card in RockPro64. The system does not start. The exact same problem is observed with Armbian_20.08_Rockpro64_focal_current_5.7.15_desktop.img. If I write the Armbian_20.05.2_Rockpro64_buster_current_5.4.43_desktop.img image to the SD Card, then the system starts and installs normally. Then I use apt update and apt upgrade, as a result, the system is updated to version 5.7.15. I am trying to transfer the system to a connected SSD, after which the system stops booting. PS Sorry for my …

• 0

  Reputation Points

• 1 reply
• 3.1k views
• 1 follower

AlexVS

September 5, 20206 yr

I have a Rockpro64 single board computer that I am trying to access remotely via an eMMC flashed Ubuntu iso image from here: https://www.armbian.com/rockpro64/, but keep getting the error message below. I was able to access the IP remotely from various laptops fine before by SSHing from the terminal, but after I failed at installing the program I wanted to install properly, I re-flashed the eMMC and have been getting this error ever since when accessing from other laptops (client-side) - I can SSH from the server-side fine with no issue FWIW. @ WARNING: REMOTE HOST IDENTIFICATION HAS CHANGED! @ @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@ IT IS POSSIBL…

• 0

  Reputation Points

• 1 reply
• 4.1k views
• 1 follower

martinayotte

August 19, 20206 yr

In order to review the Tinker Board boot logs via serial console, I set up armbianEnv.txt to get the logs. But Armbian didn't output anything. Can anyone tell me what is wrong? As long as I reviewed boot.cmd, the serial port was assigned to /dev/ttyS2. So I used UART2 GPIO pins (GP7C7 for TX, GP7C6 for RX) to interact. (snip) if test "${console}" = "serial" || test "${console}" = "both"; then setenv consoleargs "console=ttyS2,115200n8 ${consoleargs}"; fi (snip) The barudrate is 115200. Of course, I re-checked my connection between USB-UART serial cable and UART2 GPIO pins (USB-UART RX to GP7C7TX, USB-UART TX to GP7C6 RX). Any infor…

• 0

  Reputation Points

• 1 reply
• 5.7k views

Guest

August 13, 20206 yr

Hi, I am looking at investing in a RockPro64 NAS setup using the Pine64 Desktop casing and other necessary accessories. I'm hoping to run OpenMediaVault on it and have 2 3.5" HDDs attached. The entire setup would be configured to be a backup of my operational NAS (Helios4) in a different location (i.e. different room of the house). My reading of the forum and the armbian download section has me a bit confused. The download section indicates that the board is supported, but the forum indicates it's a WIP. Just trying to understand the status/stability of the board for what I'm planning on using it for and whether it would be a good investment o…

• 1

  Reputation Points

• 37 replies
• 27.4k views
• 4 followers

AlexVS

November 27, 20214 yr

Wifi AP access point broken in Linux tinkerboard 5.4.44-rockchip #20.05.2 SMP PREEMPT Wed Jun 3 10:43:15 CEST 2020 armv7l armv7l armv7l GNU/Linux [ 456.873025] ------------[ cut here ]------------ [ 456.878198] kernel BUG at mm/slub.c:3968! [ 456.882680] Internal error: Oops - BUG: 0 [#1] PREEMPT SMP ARM [ 456.889200] Modules linked in: xt_MASQUERADE xt_conntrack ipt_REJECT iptable_filter nf_nat_h323 nf_conntrack_h323 nf_nat_pptp nf_conntrack_pptp nf_nat_tftp nf_conntrack_tftp nf_nat_sip nf_conntrack_sip nf_nat_irc nf_conntrack_irc nf_nat_ftp nf_conntrack_ftp iptable_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 fuse zstd snd_soc_hdmi_codec z…

• 1

  Reputation Points

• 8 replies
• 8.5k views

Roland G

October 25, 20205 yr

Hi, I have had some issues trying to boot from eMMC with the last version of Armbian (kernel v5.4) while it's working perfectly on Armbian with a v4.4 kernel. Images not working: https://dl.armbian.com/rockpro64/archive/Armbian_20.05.2_Rockpro64_bionic_current_5.4.43.img.xz https://dl.armbian.com/rockpro64/archive/Armbian_20.05.4_Rockpro64_focal_current_5.4.46.img.xz Working image: https://dl.armbian.com/_old/rockpro64/archive/Armbian_5.98_Rockpro64_Debian_buster_default_4.4.192.7z I though I messed up with the SPI or the eMMC card but after trying all I could, it finally worked using an old version of Armbian…

• 1

  Reputation Points

• 11 replies
• 10.7k views
• 1 follower

denni_isl

March 9, 20224 yr

Hi everybody, I have a problem with this version: Armbian_20.05.2_Rockpro64_buster_legacy_4.4.213.img I don't see my disk that is plugged on the PCIe To SATA Marvell 88SE9230 in the system. I've create the file /etc/udev/rules.d/99-marvell.rules with the following line on it: ACTION=="add", SUBSYSTEM=="pci", ATTR{vendor}=="0x1b4b", ATTR{device}=="0x9230", RUN+="/bin/bash -c 'echo %k > /sys/bus/pci/drivers/ahci/bind'" If I do the same thing with this version: Armbian_20.05.4_Rockpro64_focal_current_5.4.46.img, I see my disk after creating the file. But, there's two problem with this version: first the fan always running and, m…

• 0

  Reputation Points

• 2 replies
• 4.6k views
• 1 follower

AndrewCo

May 26, 20242 yr

Hi I need help, I have used in the past the Banana PI M1 card for many years with a SATA Port Multiplier. To enable PMP support for this card, you had to edit: nano /boot/boot.cmd Go to line that starts with: setenv bootargs and add at the bottom of the row: ahci_sunxi.enable_pmp=1 recompile with: mkimage -C none -A arm -T script -d /boot/boot.cmd /boot/boot.scr Restart Almbian and the SATA Port Multiplier was activated. I now own a RockPro64 with Armbian and a 6-port PCIE sata card. Should buy a card with 8-10 ports to add hdd that I will need to make backups. …

• 0

  Reputation Points

• 1 reply
• 3.3k views
• 1 follower

DBSD

August 2, 20206 yr

Hello i hope you all have a nice day At first i need to thank you for all the work you done. I'm runnig my ROCKPro64 no for a while now Today i wanted to try wifi and bt but it looks we dont have any drivers for the module AMPAK AP6256 Combo Module and made specifically for the ROCKPro64 Debian 10 headless 20.08.0-trunk Can someone help me to reach the goal to use my wifi ?

• 0

  Reputation Points

• 2 replies
• 4.8k views

max12m3

July 13, 20206 yr

I just started RockPro64'ing (though been using Linux for about 25 years) and bought the low profile fan with the RockPro64. Armbian (downloaded today) installed fine, sees my NVME etc. so all good. The only issue I have is that once the OS starts up the fan comes on and never stops - it seems to be running 100% all the time. It the speed meant to vary? And is it meant to turn off sometimes when not required? I'm wondering if I am I missing a config file entry for this. Thanks for any assistance and well done on the distro.

• 0

  Reputation Points

• 3 replies
• 4.3k views
• 2 followers

Indieshack

July 7, 20206 yr

Hi there, I have a very strange issue: kernel 5.4.14-rockchip64 debian_version 10.3 Armbian 20.02.0-rc1 stable cable is OK - checked eth0 in /etc/network/interfaces.d/eth0 set to dhcp ---- unfortunately the rockpro64 gave up with an hardware ram issue The unit was replaced and luckily I have an image: March 3, 2020 which was OK and fully functional. Today I threw it on the SD-Card and I do not have a NIC at all. A.m. Data drawn from the OS hwinfo issues RTL8211F irq:0 27 "eth0" lshw network:0 eth0 id9 with MAC network:1 DISABLED dummy0 ip a d…

• 0

  Reputation Points

• 6 replies
• 5k views

Wilhelm Moser

July 5, 20206 yr

Hi all! Rockchip64 20.05.4 kernel images are missing from the PPA. There is only 20.05.3 in https://apt.armbian.com/pool/main/l/linux-5.4.45-rockchip64/ and no https://apt.armbian.com/pool/main/l/linux-5.4.46-rockchip64/ I am looking for the header package in particular to build zfs. Can you make those packages available, please? Best regards, kryps

• 0

  Reputation Points

• 2 replies
• 3.4k views

kryps

June 28, 20206 yr

I logged an issue a little while ago with Armbian running on the Tinkerboard that the screen when rotated 90 degrees couldn't draw the screen at any speed. I have been playing with a few alternatives incl going back to the original tinkeros. All have issues so I was delighted to see the FOCAL port. I am using the recommended Waveshare 7" touchscreen that you advertise on the home page as tested 3rd party hardware. Both the desktop and the server versions of Focal come up with the error Configure crtc 0 failed setting mode when I manually set the supported resolution of 1024 x 600 at 60Hz using xrandr Exactly the same settings on TinkerOS works perfectl…

• 0

  Reputation Points

• 3 replies
• 5.6k views
• 1 follower

Myy

July 2, 20206 yr

Hello people, I use a Tinker Board as a low power desktop computer for browsing, office documents and general tinkering, and after all this time it got personalized enough to worry about loosing all this setup and it is a hassle to just overwrite everything every time a new image comes around. Was wondering if it is possible to use apt dist-upgrade as means to get from Bionic Desktop 5.4 to Focal Desktop 5.4 as can be done on x86 platforms without breaking everything?

• 1

  Reputation Points

• 3 replies
• 5.5k views
• 2 followers

Technicavolous

July 4, 20206 yr

However, Armbian is configured to provide only spidev2.0, while TinkerOS can have spidev0.0, spidev0.1, spidev2.0 and spidev2.1 all enabled at the same time as long as you disable UART4 which shares GPIO header pins with SPI0. In the TinkerOS case, there is a config tool which edits a small and straightforward text file in /boot/ containing lines such as "intf:spi0=on" or "intf:uart4=off". The corresponding Armbian file seems to be /boot/armbianEnv.txt - possibly with overlays=... lines and DTS files. There also is a tool called armbian-add-overlay to load (at runtime?) DTS files...

• 0

  Reputation Points

• 0 replies
• 2.6k views

Bienxanh

June 2, 20206 yr

Hello, compiling Kernel 5.4.40 (setting in lib.config with KERNELBRANCH=tag:'5.4.40') under Vagrand with RT-Patch "patch-5.4.40-rt24.patch" putting in " ~/build/userpatches/kernel/rockchip64-current/ "for RockPro64 fails. ........ [ o.k. ] * [l][c] general-rt5651-add-mclk.patch [ o.k. ] * [l][c] mp8859-kbuild-makefile.patch [ o.k. ] * [c] patch-5.4.40-rt24.patch [ o.k. ] * [l][c] rk3328-add-dmc-driver.patch [ o.k. ] * [l][c] rk3328-audio-and-renegade-supplies.patch [ o.k. ] * [l][c] rk3328-clean-up-codec-gpio-SD.patch [ o.k. ] * [l][c] rk3328-fix-wrong-mmc-shift.patch [ o.k. ] * [l][c] rk3399-add-sclk-i2sout-src-clock.patch [ o.k. …

• 0

  Reputation Points

• 6 replies
• 4.8k views
• 1 follower

martinayotte

May 27, 20206 yr

I have a latest ubuntu armbian on a pinebook pro, I use an DUB-1312 gigabit to usb 3.0 for wired connection, I plug it in the usb 3 port of the pinebook but I run iperf I see the same speeds as the other usb 2 port. $ iperf3 -c 192.168.0.34 Connecting to host 192.168.0.34, port 5201 [ 5] local 192.168.0.33 port 48140 connected to 192.168.0.34 port 5201 [ ID] Interval Transfer Bitrate Retr Cwnd [ 5] 0.00-1.00 sec 41.7 MBytes 350 Mbits/sec 0 298 KBytes (More thread only made results worst) While the same DUB-1312 plugged in my amd64 ubuntu computer achieve 950Mb/s easly (capped by the other testing device (an odroid-hc1)). …

• 0

  Reputation Points

• 0 replies
• 2.9k views

Jorropo

May 22, 20206 yr

Hi, hot o enable splash screen on boot fo this image: Armbian_20.02.1_Rockpro64_bionic_legacy_4.4.213_desktop.img for Rockpro64? Thanks

• 0

  Reputation Points

• 0 replies
• 2.8k views

DBSD

May 15, 20206 yr

If anyone has troubles with HDMI when using 5.x kernels, and has enough skills to recompile an armbian, give this a try : https://github.com/Miouyouyou/build And then either answer here, or in the bug report : https://github.com/armbian/build/pull/1887

• 0

  Reputation Points

• 0 replies
• 2.8k views

Myy

May 9, 20206 yr