Amlogic meson
Quick links to search tags:
Banana Pi CM4-IO, Banana Pi M2S, Banana Pi BPI-M2 Pro, Banana Pi M5, JetHub D1, JetHub H1, Khadas VIM1, Khadas VIM1S, Khadas VIM2, Khadas VIM3, Khadas VIM3L, Khadas VIM4, La Frite, Le Potato, Sweet Potato, Odroid C1, Odroid C2, Odroid C4, Odroid HC4, Odroid N2/N2+, Radxa Zero
-
Is there a way to force a composite output? I was able to get composite video in LibreELEC but I would rather use Armbian if possible. Any information would be helpful.
-
hello, I found default armbian image will cause the CPU temperature very high. My cpu freq is setting 1Ghz and usage is around 20%, This should not cause the cpu to overheat. This is my armbianmonitor -m : ``` Time CPU_cl0/CPU_cl1 load %cpu %sys %usr %nice %io %irq Tcpu C.St. 18:55:22 1000/1000 MHz 0.88 17% 6% 9% 0% 0% 1% 103.0 °C 8/8 18:55:27 1000/1000 MHz 0.89 17% 5% 9% 0% 0% 1% 103.0 °C 8/8 18:55:32 1000/1000 MHz 0.90 17% 5% 9% 0% 0% 1% 103.1 °C 8/8 18:55:37 1000/1000 MHz 0.83 17% 5% 9% 0% 0% 1% 103.2 °C 8/8 18:55:42 1000/1000 MHz 0.76 17% 6…
-
System Overview Hardware: ODROID HC4 OS: Armbian (current version) Kernel: 6.12.44-current-meson64 Use case: Production NAS with critical data Problem Description During apt upgrade, the following critical warnings appear: dpkg: warning: This system uses merged-usr-via-aliased-dirs, going behind dpkg's dpkg: warning: back, breaking its core assumptions. This can cause silent file dpkg: warning: overwrites and disappearances System state analysis reveals: /bin, /sbin, /lib are correct symlinks to /usr/* BUT: Files exist in duplicate (/bin/bash and /usr/bin/bash identical) DKMS cannot build kernel modules (missing headers)…
-
Hi, after the installation of the new kernel version (5.6.15-meson64) on my board (Le Potato), the display have ~1cm offset on the top of the monitor and ~1cm of non-visible element on the bottom. It is basically moved down by ~1cm from the center. I have already had this problem, but it "self solved" by updating the kernel, so i have no hint to solve the problem, only that it is very likely caused by something in the kernel. For the display i use an HDMI connector. I have attached the armbianmonitor log, if some more info are needed, you have only to ask. Thanks in advance for the time and dedicated effort. Have a good day! Edit: Wow,…
-
Reputation Points
- 3 replies
- 4.5k views
-
-
Hello! I have installed Armbian Bookworm on Khadas VIM3. Also I have enabled "UARTa" , "UARTc" in armbian-config utility. After reboot in file /boot/armbienEnv.txt I have checked options about uart (uarc). Also there are many files /dev/ttyS[0-7] exists. After this I try to connect "minicom -D /dev/ttyS0" (ttyS0, S1, and S3 etc). But no answer from my device on pins 15,16 OR 18,19 (this is a UARTA,UARTC, UART linux). Python sripts pyserial output: "i/o error". Does Armbian (Bookworm or Jammy) supports Khadas VIM3 UART? Are there successful cases? One more question: On Ubuntu Server files …
-
Reputation Points
- 1 reply
- 2.7k views
- 1 follower
-
-
Hello! I have installed on Armbian 24.8.1 noble (ubuntu 24.04) . Also I have enabled "UARTa" , "UARTc" in armbian-config utility. In /boot/armbianEnv.txt file: overlays=uartA uartC for enable UART port. There are many files /dev/ttyS[0-7] exists. After this I try connected to this ports, but no success (minicom -D /dev/ttySx). Python sripts with pyserial module output: "i/o error". The same problem I have noticed with previous versions of Armbian. I have checked on other distributive (Khadas version of ubuntu server) the uart port is worked fine. Does Armbia…
-
Reputation Points
- 2 replies
- 3.6k views
- 1 follower
-
-
Hi, the system seems working normally, but when installing with apt, I get plenty of errors of: dpkg: cannot write to log file '/var/log/dpkg.log': No space left on device Digging into /var/log reveals that the ./journal directory is responsible; with 48 Mb. Any idea how to prevent this? Currently, I just remove the directory below ./journal.
-
Reputation Points
- 9 replies
- 27.8k views
- 2 followers
-
-
Hi, Does anyone know how to get rid of the error on Odroid N2+ ? The error appears after some time of using GUI app on XFCE DRM_IOCTL_MODE_CREATE_DUMB failed: Cannot allocate memory Failed to create scanout resource
-
Reputation Points
- 2 replies
- 4k views
- 1 follower
-
-
Hello, I am trying to connect a ds3231 module to get time during boot (dns does'nt like 1970) and without internet connexion. I load a recent build UBUNTU 26.2.1 on the M5 but unfortunatly after 2 days of research with chatgpt , I ask to knowledge experience people if they know if it's possible and which kind of dts can make this module up and running. I did'nt identify a dtbo on the distribution , a made a lot of investigation , pin 3 and 5 og the 40pins connector is connect to the cpu with pullup resistor , i try a lot dts conf and nothing gave result. If some one did this kind of connexion thanks in advance. Gérard
-
Reputation Points
- 7 replies
- 2.7k views
- 1 follower
-
-
I've just install Armbian_23.02.2_Odroidhc4_jammy_current_6.1.11.img to my new odroid hc4 but after copy sd to sata by using nand-sata-install the system stuck dureing boot on an "emergency mode error".
-
I've been trying to enable SPI on the board but have had no luck in this. I noticed that in the armbian-config there is no spi option. I have edited the armbianEnv.txt file to include orerlays = spi-spidev param_spidev_spi_bus = 0 I've tried changing the bus to 1 None of these actions have helped. Any advice would be greatly appreciated.
-
Reputation Points
- 2 replies
- 4.5k views
-
-
Hi, So I found out the hard way that neither jammy nor bullseye builds for odroid c2 actually allow ssh at first boot My board is headless, but has a wired connection to my lan and always gets assigned the same address. Which file or files do I need to edit to ssh into it without having to do initial setup first, please?
-
Reputation Points
- 2 replies
- 11.3k views
- 2 followers
-
-
I have just installed an Armbian Jammy CLI on my BPI-CM4. I need to use the UART that is routed to pins 8 and 10 on the 40-pin connector (UART_EE_B in the BPI-CM4 schematics). I have enabled it in the device tree by changing this from disabled to okay: serial@23000 { compatible = "amlogic,meson-g12a-uart\0amlogic,meson-gx-uart"; reg = <0x00 0x23000 0x00 0x18>; interrupts = <0x00 0x4b 0x01>; clocks = <0x12 0x02 0x2a 0x12>; clock-names = "xtal\0pclk\0baud"; status = "okay"; phandle = <0x12b>; }; Once rebooted, and new UART appears (ttyAML6). However, it does not work. What am I missing? …
-
Reputation Points
- 1 reply
- 2.8k views
- 1 follower
-
-
Hello, Setup Yocto branch: Kirkstone (honister back-ports disabled) Layers / commits meta-odroid 06f8d2c (last week’s master) poky kirkstone (bitbake 2.2.0) Kernel: linux = v5.15 What I changed so far Enabled the driver Added a linux-hardkernel_%.bbappend with: CONFIG_PWM=y CONFIG_PWM_MESON=y Patched the Device Tree (added a new layer to patch in yocto using devtool): From 9f296f4b8f636b12ef8c0a4720cf0d25d9eeb810 Mon Sep 17 00:00:00 2001 From: OpenEmbedded <oe.patch@oe> Date: Thu, 17 Jul 2025 15:50:18 -0400 Subject: [PATCH] some changes to source for pwm --- arch/arm64/…
-
In my quest to use an ODROID N2 as a time server, I had to figure out how to enable UART_EE_A. Device trees for other boards sometimes enable UART A in the base device tree but the ODROID N2/N2+ does not. I am not sure why device trees don't fully define devices like UART_A and then just leave them disabled instead of partially defining them with missing "pinctrl" entries (as in the N2 device tree). Anyway, I've attached `meson-g12b-odroid-uart-ee-a.dtso` as an example of how to enable UART_EE_A. Additionally: The DT overlays for Meson UARTs (e.g. `/boot/dtb/amlogic/overlay/meson-uartA.dtbo`) are not compatible with …
-
Reputation Points
- 4 replies
- 4.5k views
- 1 follower
-
-
Hello, After a firmware update today I got a problem with Wireguard on my Odroid-hc4. I got that when checking ufw status, sudo ufw status verbose ERROR: problem running iptables: modprobe: FATAL: Module ip_tables not found in directory /lib/modules/5.10.123-meson64 iptables v1.8.7 (legacy): can't initialize iptables table `filter': Table does not exist (do you need to insmod?) Perhaps iptables or your kernel needs to be upgraded. How to fix that? Laurent
-
Reputation Points
- 11 replies
- 11.6k views
-
-
Latest armbian firmwares fail to boot on vim3 and graphical desktop do not start. As a workaround I installed old armbian image from August 2024 which booted and worked fine but sudo apt upgrade installed new firmware and it fails to boot to desktop again. Fails on all images Xfce and gnome available on website.
-
I have three identical Odroid HC 4 which has been running the same software and using the kernel 6.12.32-current-meson64. Their are configured as NAS where the data is split across all three devices and therefore their are running constantly. A couple of weeks ago began the fan on one of the machines behavior different. It would either be running a full speed or no running, it was no longer possible to control via PWM. Now last week did another one start with the same behavior. I was do the following to test and validate the issue: I have disable the fancontrol service and manually written to hwmon2/pwm1 to set the PWM. Which was possible on the health…
-
Reputation Points
- 4 replies
- 2.1k views
- 1 follower
-
-
Been having an issue where my idle temps are >60C The fan will spin for maybe a second or two and then turn off for 10-20 seconds Checking /sys/class/hwmon/hwmon2/pwm1 and it is set to 0 even though my MINPWM is set to 90 Even if I manually tee 90 to pwm1 it will eventually reset to 0 even with fancontrol turned off So something resetting without my input... fan1_input does read fan speed & pwm1_enabled is set to 1 lsof & auditd do not have any info as to what is overwriting the file Only way I can get the fan to stay on is to loop the tee command for a few seconds and then it is on that one speed Turning f…
-
Reputation Points
- 4 replies
- 6.1k views
- 2 followers
-
-
Armbian recently merged and will be releasing (and backporting) a patched devicetree file for the Odroid C4 and HC4 that eliminates the second power-cycle "glitch" during boot. Hopefully this will fix at least one issue people have been reporting, where some HDDs (or other devices) do not react well to rapid power double-tap during boot. https://github.com/armbian/build/blob/main/patch/kernel/archive/meson64-6.19/board-odroid-sm1-regulators-boot-on.patch It will also be released (and likely backported) upstream in next Linux kernel release and/or fixes. Also, something else people have been reporting is the HC4 struggling to spin up two l…
-
Hi, Odroid N2+ Armbian 22.05 Jammy Kernel 5.10.y, Size: 360Mb, Updated: Jul 1, 2022 + XFCE installed by means of armbian-config htop shows Systemd: degraded (1/372 failed) root@n2p-dev:~# systemctl --failed UNIT LOAD ACTIVE SUB DESCRIPTION ● fwupd-refresh.service loaded failed failed Refresh fwupd metadata and update motd LOAD = Reflects whether the unit definition was properly loaded. ACTIVE = The high-level unit activation state, i.e. generalization of SUB. SUB = The low-level unit activation state, values depend on unit type. 1 loaded units listed. root@n2p-d…
-
Hi, I've been using the /dev/ttyAML1 UART port on my Odroid N2+ at the GPIO pins 8 and 10 with buster. With the update to bullseye, the /dev/ttyAML1 device disappeared. Also now in bookworm it is no longer present. Now I happen to need the UART at GPIO 8 and 10 again and did some more persistent research and came across this post over in the DietPI forum. It provided an alternative meson-g12b-odroid-n2-plus.dtb which I installed in my system. Since then my /dev/ttyAML1 device is back and I can use the UART at GPIO 8 and 10 as I wished. However, I am a bit nervous, since I just installed some binary dtb file to my system at a path which …
-
Reputation Points
- 3 replies
- 3.5k views
-
-
Hi, I am new to Armbian, and I don't know how to control VIM3's GPIOs. Can someone help me please? I have Armbian bookworm 24.5.1, kernel 6.6.32-current-meson. Thank you!
-
Reputation Points
- 0 replies
- 3.7k views
- 1 follower
-
-
Hello everyone, I'm currently working on a bananaPi M2S and trying to set up serial communication through the GPIO port on my device. I am using the provided overlay for UART-A. The overlay seems to work as it registers the serial device, as indicated by the dmesg output: bash [ 0.000277] printk: console [tty1] enabled [ 0.734433] ff803000.serial: ttyAML0 at MMIO 0xff803000 (irq = 14, base_baud = 1500000) is a meson_uart [ 0.734458] printk: console [ttyAML0] enabled [ 0.735241] ffd24000.serial: ttyAML6 at MMIO 0xffd24000 (irq = 15, base_baud = 1500000) is a meson_uart [ 0.735395] serial serial0: tty port ttyAML6 registered [ 2.663304] syste…
-
Reputation Points
- 0 replies
- 2.1k views
- 1 follower
-
-
I am running the Ubuntu Noble 24.04 XFCE image on a Radxa Zero SBC (first generation device). Trying to play a video with parole (gstreamer video player) produces the error message "GStreamer Backend Error: Could not read from resource. " Increasing the gstreamer debug level produces the following additional information: 0:00:00.329008719 131342 0xaaab079354e0 WARN GST_ELEMENT_FACTORY gstelementfactory.c:765:gst_element_factory_make_valist: no such element factory "autoimagesink"! 0:00:05.702394971 131342 0xffff7c0013d0 ERROR v4l2bufferpool gstv4l2bufferpool.c:716:gst_v4l2_buffer_pool_streamon:<v4l2h264dec0:pool0:sink> …
-
Reputation Points
- 5 replies
- 6.7k views
- 1 follower
-
-
root@odroidn2:~# journalctl -x | grep haveged Mar 12 19:43:51 odroidn2 kernel: audit: type=1400 audit(1615574627.248:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/haveged" pid=1635 comm="apparmor_parser" Mar 12 19:43:47 odroidn2 audit[1635]: AVC apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/haveged" pid=1635 comm="apparmor_parser" -- Subject: A start job for unit haveged.service has finished successfully -- A start job for unit haveged.service has finished successfully. Mar 12 19:43:52 odroidn2 haveged[1836]: haveged: Couldn't initialize HAVEGE rng 9 Mar 12 19:43:52 odroidn2 haveged[1836]:…
-
Reputation Points
- 6 replies
- 8.8k views
- 3 followers
-
-
It looks like there is a linux-headers mismatch in those two images: Armbian_24.11.1_Odroidhc4_bookworm_current_6.6.60_minimal.img Armbian_24.11.1_Odroidhc4_noble_current_6.6.60-kisak.img Installed those linux-headers: apt install linux-headers-current-meson64 I tried then to install ZFS module, and it failed: Setting up zfs-dkms (2.2.5-1~bpo12+1) ... Loading new zfs-2.2.5 DKMS files... Building for 6.6.60-current-meson64 Module build for kernel 6.6.60-current-meson64 was skipped since the kernel headers for this kernel do not seem to be installed. root@odroidhc4:~# dpkg -l | grep li…
-
Some time ago a I was desperate to have ZFS on an Odroid HC4 and after some trying found Armbian 21.05.8 Buster with Linux 5.10.57-meson64 on which I could compile ZFS module. Then I moved everything from the SD card to filesystems in a ZFS pool. It boots from SD card, though. And has been working fine for several months. Recently I bought another HC4 and took the current Armbian image for it: Armbian 22.08.8 Jammy with Linux 5.19.17-meson64 Everything works fine. Tried this image on the older HC4 and it doesn't see the second SSD. In the syslog I found this message: ata1: SATA link down (SStatus 0 SControl 300) …
-
As the original thread, which was closed by moderator for obvious reason, did attract attention of few peoples having the same problem as me, it would be a waste not to follow up on this, I think. Let me sum up: I have two HC4, one bought in 8.2021 and other one 11.2022, both have two SSDs each. The older one after a kernel upgrade didn't see a second disk any more. I've just tried few kernels I could find with the following results: OK: Linux odroidhc4 5.12.10-meson64 #21.05.4 SMP PREEMPT Wed Jun 16 08:19:35 UTC 2021 aarch64 aarch64 aarch64 GNU/Linux OK: Linux odroidhc4 5.13.12-meson64 #21.08.1 SMP PREEMPT Wed Aug 25 19:35:13 UTC 2021…
-
Reputation Points
- 5 replies
- 4.3k views
- 1 follower
-
-
Hi! You can find the armbianmonitor output attached to this thread. The issue is: when I use HDMI audio output with wine applications the entire system freezes very soon, usually after some seconds from the launch of the application. Some fraction of the latest played sound keeps looping very fast and both mouse and keyboard are unresponsive. All I can do is to unplug the power. This happens both on Odroid N2 and Odroid N2+. Everything works fine if I use some bluetooth headphones. And everything works fine if I use HDMI audio output with linux native applications. The problem is in the combination of Wine applications and HDMI audio output. Armbian Monitor Out…
-
Hello everyone, I've recently started migrating a project for Banana Pi M5 from Debian 10 Buster to Armbian, because I've found that the latest versions of it now support the GPU, Mali G31, and come with Panfrost OpenGL driver, which is crucial for this project. Everything was perfect until I had to implement two features: operating with TV via CEC and showing boot logo. Quickly about the last one - as I've understood, we have to use Plymouth, but I didn't really get how to do it, I've tried to activate it but had no success (how exactly see under paragraph). However, it doesn't work on Server Images (even on those that were compiled with build tools and activat…
-
Support file: https://paste.armbian.com/enivosames I have connected an LCD touch display via HDMI and USB to the M5. The display shows messages during booting or shutdown but then "freezes" leaving the last few lines of the boot process displayed but does not show the console or anything else. What am I missing?
-
Long story short: I used for about one year an odroid HC4 as NFS server and worked fine. Now I would add a player service for it. It mounts an HDMI port, so I tried to plug in the cable and it worked. I were able to see the video output but with no sound. I found there is no detected hdmi card: # aplay -l **** List of PLAYBACK Hardware Devices **** card 0: ODROIDHC4 [ODROID-HC4], device 0: fe.dai-link-0 (*) [] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: ODROIDHC4 [ODROID-HC4], device 1: fe.dai-link-1 (*) [] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: ODROIDHC4 [ODROID-HC4], device 2: fe.dai-link-2 (*) [] Subdevices: 1/1 Subdevice #0: sub…
-
Reputation Points
- 0 replies
- 4k views
- 1 follower
-
-
I am trying to use radxa-zero with HDMI CEC support on Armbian debian. I tried all different Armbian debian versions, lsmod never give me module cec So I took a look at images provided by radxa (https://github.com/radxa-build/radxa-zero/releases/tag/20220801-0213, not armbian ones), cec is loaded by default I think this is the key: /lib/modules/SOME_KERNEL/kernel/drivers/media/cec/core/cec.ko This is in their image but not /lib/modules/6.1.11-meson64 folder (I guess also not in other kernel versions) If that's the case, CEC should not work on any meson64 devices. I saw CONFIG_CEC_CORE=y is in config. btw, another p…
-
Reputation Points
- 2 replies
- 3.4k views
- 1 follower
-
-
I have been trying to diagnose a QHYCCD camera problem on a N2 running INDI server. Everything appears to work fine but after several minutes the device fails to respond. The device is only supported by QHY on a true USB3 slot. Looking on other forums USB and cable stability are a common problem with these QHY devices so falling onto the wrong USB bus would definitely be a problem. However looking at lsusb I can see the device has dropped onto the wrong USB bus: $ lsusb Bus 002 Device 002: ID 05e3:0620 Genesys Logic, Inc. USB3.1 Hub Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 002: ID 04a9:3217 Canon, In…
-
Reputation Points
- 0 replies
- 2.7k views
-
-
Hello, i have a screen thats bigger than what I could see (frame). on a raspberry, i change the config with overlay adjustment. But i dont know how to do this for the banana pi.. Someone Here could redirect me the rijgt pad where to fix it?
-
Reputation Points
- 0 replies
- 1.2k views
-
-
I am unable to configure Xorg to ignore (and stop using as its default) the None-1 video device causing me not to be able to display a desktop via the HMDI-1-1 device. It has been suggested (https://ubuntu-mate.community/t/how-to-configure-xorg/26732/3) that I disable this device in the kernel, hopefully, via a kernel option such as : video=None-1:d Does anyone know where (which file) and how (specific method) I should do this?
-
Reputation Points
- 3 replies
- 4.7k views
-
-
context ------------ Hardware: BPI CM4 on BPI CM4IO board OS: Armbian 24.11.1 Bookworm Minimal Build: https://dl.armbian.com/bananapicm4io/Bookworm_current_minimal problem ------------ How do i enable i2c2 so i can be able to use the following pins on the BPI CM4IO board for i2c pin 82 (GPIOX_17): (MUX UNCLAIMED) (GPIO UNCLAIMED) pin 83 (GPIOX_18): (MUX UNCLAIMED) periphs-banks:595 Previously on the ubuntu build all i had to do is add the following line to `/boot/env.txt` , `overlays="12c2"`, as stated in this doc https://wiki.banana-pi.org/Getting_Started_with_CM4#DTB_overlay 2. Update the overlays env in vfat /boot/env.txt to ena…
-
I'm using the "Armbian 22.11.1 Lepotato jammy 5.19.17 xfce desktop" image which comes with lightdm windows manger and wayland xserver. I want to use https://github.com/debauchee/barrier but it does not support wayland, so I want to switch to xorg. So far I've tried installing xorg using apt and adding the following line to /etc/lightdm/lightdm.conf xserver-command=Xorg but when I do sudo systemctl restart lightdm the display manager hangs forever with blank screen and blinking cursor.
-
Reputation Points
- 1 reply
- 4.2k views
- 1 follower
-
-
I have an Odroid-N2+ and I would like very much to Armbian on it. However, when I run lspcu I see that mitigations for hardware side channel attacks are missing: $ lscpu Architecture: aarch64 CPU op-mode(s): 32-bit, 64-bit Byte Order: Little Endian CPU(s): 6 On-line CPU(s) list: 0-5 Vendor ID: ARM Model name: Cortex-A53 Model: 4 Thread(s) per core: 1 Core(s) per socket: 2 Socket(s): 1 Stepping: r0p4 CPU max MHz: 2016.0000 CPU min MHz: 1000.0000 BogoMIPS: 48.00 Flags: fp asimd evtstrm aes …
-
Hello folks. I am thinking about getting a VIM3 or VIM4 as a PC for computation purposes. I think Monero mining shows the limit of a combination of memory + cpu. The higher the more performant the combination of memory + cpu is. My choice is currently between a board like VIM3 or VIM4 or a desktop i5 9th gen. I will be thankful if an owner can xmrig monero mining software to do a benchmark. So to do the benchmark one should: - Download xmrig - Run a benchmark and submit it: https://xmrig.com/docs/miner/benchmark The benchmark will be available in the benchmarks page in xmrig website. Note that there should be enough f…
-
Reputation Points
- 1 reply
- 2.8k views
- 1 follower
-
-
Hello, is it possible to add support for TS050 original LCD touchscreen in Armbian? How I can check tochscreen, is there any CLI tools? Thank you in advance.
-
Reputation Points
- 1 reply
- 2.8k views
- 1 follower
-
-
Hi, I have a odroid n2+ and I want ask, how to enable UART on the pin8 and pin10 ? Normaly it's mapped as ttyAML1 but this is now missing. I found some informations about /boot/armbianEnv.txt, but I'm not well experienced so I don't want beak a OS. Please can you help me what to modify to get UART working ? Thank you for help
-
Reputation Points
- 1 reply
- 2.7k views
- 1 follower
-
-
Hello there, I'm trying to get an i2c ssd1306 screen to work with my Radxa Zero, without much luck for the time being. https://paste.armbian.com/cirulemeho I found two i2c devices, 3 and 5. sudo i2cdetect -y -r 3 0 1 2 3 4 5 6 7 8 9 a b c d e f 00: -- -- -- -- -- -- -- -- 10: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 20: -- -- UU -- -- -- -- -- -- -- -- -- -- -- -- -- 30: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 40: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 50: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 60: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 70: -- -- -- -- -- -- …
-
Reputation Points
- 2 replies
- 3.8k views
- 1 follower
-
-
I tried 3 las disk images in SD card, update and OMV is not available fo install. In all tutorials show that OMV is available there. But when on my N2, it's not available.
-
Reputation Points
- 1 reply
- 4.2k views
- 1 follower
-
-
I run output/images/Armbian-unofficial_24.5.0-trunk_Onecloud_bookworm_current_6.6.21_minimal.burn.img on my onecloud board. It shutdown about every 40 minutes. How to solve this problem? Thanks! journalctl.log kern.log armbian-hardware-monitor.log
-
Reputation Points
- 3 replies
- 3.2k views
- 1 follower
-
-
Hi. I recently purchased a few DS18B20 sensors. I'm having troubles setting up 1-wire on the newest armbian: root@odroidn2:~# uname -a Linux odroidn2 5.8.5-meson64 #20.08.1 SMP PREEMPT Tue Sep 1 18:47:20 CEST 2020 aarch64 GNU/Linux My DS18B20 adapter is connected to "GPIOX_7(#)" as suggested on Odroid forum: https://forum.odroid.com/viewtopic.php?p=305664#p305664 Using the official Ubuntu 18.04 image with 4.9.230-76, I was able to find devices in "/sys/bus/w1/devices". Now, I'm trying to do the same thing on Armbian. I added to: /boot/armbianEnv.txt overlays=w1-gpio param_w1_pin=GPIOX_7 param_w1_pin_i…
-
Reputation Points
- 3 replies
- 7.1k views
- 1 follower
-
-
as described in: https://gitlab.freedesktop.org/mesa/mesa/issues/2377 it's possible to use meson HW video codec now, but in the URL, not very clear, does any one know how to use it?
-
Reputation Points
- 25 replies
- 26.1k views
- 1 follower
-
-
I am currently using a completely outdated system on my Odroid-C1, specifically Ubuntu 16.04.7 LTS and I am able to transmit signals without issues using lirc 0.9.0. Without making any special changes to the /etc/lirc/hardware.conf file and using the following configuration: #Chosen Remote Control REMOTE="None" REMOTE_MODULES="" REMOTE_DRIVER="" REMOTE_DEVICE="" REMOTE_SOCKET="" REMOTE_LIRCD_CONF="" REMOTE_LIRCD_ARGS="" #Chosen IR Transmitter TRANSMITTER="odroid blaster" TRANSMITTER_MODULES="lirc_odroid lirc_dev" TRANSMITTER_DRIVER="" TRANSMITTER_DEVICE="/dev/lirc0" TRANSMITTER_SOCKET="" TRANSMITTER_LIRCD_CONF="" TRANSMITTER_L…
-
unable to access gpio using wiringpi python. I have tried steps available on banana pi wiki. but it throws error "/dev/gpiomem" is not available and then "This board is not odroid". did anyone successfully implemented this?
-
Reputation Points
- 12 replies
- 6.2k views
-
-
I just got one so I have modified my version of htop for the Raspberry Pi to work on the AML-S905X-CC (Le Potato) that shows cpu temp and current frequency in case anyone is interested. Here's the GitHub : https://github.com/leeadama/htop/tree/lepotato See the Readme for Build Instructions. Once you have it built and installed, you add the temp and frequency display like any other meter. I.E. press F2, arrow all the way to the right and choose Temperature Sensors, press Enter to add it and Enter to confirm. Then just repeat the process for the FreqMeter. Tested on Ubuntu Desktop - Mainline Kernel Linux lepo…
-
Hello, I am having hard time installing hwclock 4PCS DS3231 on S905X-CC board. Can anyone please help?
-
Reputation Points
- 5 replies
- 4.3k views
- 1 follower
-
-
I'm testing the Armbian image for Odroid N2+ ( Armbian_22.08.7_Odroidn2_jammy_current_5.19.17_xfce_desktop) to see if it's a good migration path from the HardKernel base image. Unfortunately I need to get both i2c bus running on the GPIO and so far only the first bus seems to work (i2c-0). Looking into /sys/bus/i2c/devices , it looks like i2c-1 is tied to the hdmi port instead of the 2nd i2c bus on the GPIO : lrwxrwxrwx 1 root root 0 Dec 31 1969 0-0051 -> ../../../devices/platform/soc/ffd00000.bus/ffd1c000.i2c/i2c-0/0-0051 lrwxrwxrwx 1 root root 0 Dec 31 1969 i2c-0 -> ../../../devices/platform/soc/ffd00000.bus/ffd1c000.i2c/i2c-0 lrwxrwxrwx 1 root …
-
Reputation Points
- 4 replies
- 5.6k views
- 1 follower
-
-
PRETTY_NAME="Armbian 22.08.7 Bullseye" NAME="Debian GNU/Linux" VERSION_ID="11" VERSION="11 (bullseye)" VERSION_CODENAME=bullseye ID=debian HOME_URL="https://www.debian.org/" SUPPORT_URL="https://www.debian.org/support" BUG_REPORT_URL="https://bugs.debian.org/" Hello everyone and thanks for accepting me in the forum. I recently bought a banana pi M5, intalled armbian but i can't use i2c, I tried to enable i2cA and i2cB from armbian-config without success. I have also tested numerous dts files with no success. Can anyone help me with this? Thank you.
-
Reputation Points
- 10 replies
- 8.6k views
- 1 follower
-
-
What should the correctly enabled I2C service (for a 40x2 LCD) look like on Bananapim2pro? Should I edit the armbianEnv.txt file and add, for example, the following entry: overlays=i2c0 i2c1? The armbian-config service is a bit confusing, and after editing it, I get this: ........................ verbosity=1 console=both overlay_prefix=meson fdtfile=amlogic/meson-sm1-bananapi-m2-pro.dtb rootdev=UUID=a4fb8074-c453-45da-ab31-4d61dca46cfa rootfstype=ext4 overlays=i2cA i2cB usbstoragequirks=0x2537:0x1066:u,0x2537:0x1068:u .................. There are other options, but they probably don't apply to bananapim2pro. : sm1-odroid-c4-i2c0 …
-
Lepotato with Armbian Jammy armbianmonitor -u is here: https://pastebin.com/UVbLxVH0 Trying to use I2c to drive a SSD1306 type oled screen. All wires have been tested for continuity and are good. Screen is connected as follows: Screen SDA -> Pin 27 Screen SCL -> Pin 28 Screen VCC -> Pin 4 Screen GND -> Pin 6 ive enabled i2c-a and i2c-b via armbian-config i2cdetect -y 0 0 1 2 3 4 5 6 7 8 9 a b c d e f 00: -- -- -- -- -- -- -- -- 10: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 20: -- -- -- -- -- -- -- -- -- -- -- -…
-
Reputation Points
- 2 replies
- 4.4k views
- 1 follower
-
-
Is it possible to enable the I2S service (for audio) on BananaPim2pro? In the program configuration: armbian-config / manage device tree overlays...there are no entries for: I2S. Maybe someone already knows what to enter or how to enable it 🙂
-
I was curious if anyone had worked on power management for the S905X. My Le Potato was idling around 0.32A@5.1V = ~1.5W The LibreElec guys documented idle current ~2/3 of that here so I was curious what was going on. Of course I am running a 4.18 armbian kernel (I assume they were using a 3.14 kernel for their tests) so I was never going to match their numbers precisely, but 33% more power seemed like an awful lot. Then I realized I had a USB thumb-drive installed, so I did some experimentation... My numbers were generated using an inline USB power meter that measures pretty accurately compared to a bench meter. My initial findings: …
-
Reputation Points
- 8 replies
- 9.8k views
- 1 follower
-
-
hello, My image is (Armbian BookwormXFCE desktop 20230831) and download to cm4 moudule. When I using the Bananapi CM4 base board ( https://wiki.banana-pi.org/File:BananaPi_BPI-CM4_base_board_1.jpg) the USB function is working. But I using the common RPI CM4 base board, such as waveshare's cm4 nano-b (https://www.waveshare.net/wiki/CM4-NANO-B) the USB function is not working. I compare the difference of two board's schematics. Bananapi's base board is connecting the fs1.1 usb hub ic. but waveshare's base board was connecting USB D+/D- to USB host directly . I also tried bananapi official image (both Debian and Ubuntu mate) and…
-
Reputation Points
- 3 replies
- 3k views
- 1 follower
-
-
Hi, This is my first try to add a board to armbian build system. I got a BPI M2S since several months, but only had time recently to investigate on this promising SBC. I made a PR here, if somebody wants to try it: https://github.com/armbian/build/pull/4597 The main improvements are to be done for the dts file, since I'm not an expert about such file definition. Only 1 ethernet of the Gbit ports is working, since I copy the config from vim3 that share the same hardware for it. I didn't try to customize u-boot and I use the one for radxa zero2 that works to launch armbian on the board. armbianmonitor -u is here: https://paste.armbian.co…
-
Reputation Points
- 7 replies
- 5.1k views
- 1 follower
-
-
Hi all, I have been using armbian jammy on my potato without issues. But since the weekend it only boots to initramfs and says can't find mmcblk1p1 I put the sdcard a live gparted and partitions are and verified. In initramfs I can find in /dev the mmcblk0p1 but not the mmcblk1p1 Now how can I change the boot or the name of the device?
-
Reputation Points
- 6 replies
- 6.5k views
-
-
I was going to install armbian on a new vim 3 board but it seems that krescue no longer exists. Is there another way to install armbian to a vim 3? Does the vim 4 have the same problem?
-
Reputation Points
- 11 replies
- 6.5k views
- 1 follower
-
-
I am wondering how to install this. I've installed armbian on a nanopc, and edge V which is now a brick after a brief use as an armbian machine. But never successfully to a vim 3. I have a fresh out of the box vim3 that fails on boot with the current image on sdcard. The first vim4 was a doorstop on arrival. I finally have a second vim 4 that does seem to work if I push the function button 3 times it goes to oowow. But so far nothing that I've read works to boot from sdcard. "Holding the function button while power on." I havent found any instructions here about an install process other than insert th…
-
Hello community, I'm a beginner with all that kernel and modules stuff, so please be kind, if I am asking stupid questions. My plan is to install a Hifi-Shield on my C2, but so far had no luck: modprobe: FATAL: Module snd_soc_pcm512x not found in directory /lib/modules/ Found out, that some modules are present under /lib... e.g. /lib/modules/5.15.0-105-generic/kernel/sound/soc/codecs/snd-soc-pcm512x.ko (cave:this is example from my ubuntu I'm writing on) some other modules are in fact missing. I found similar modules here: https://github.com/3isenHeiM/HiFi-Shield-Plus/blob/master/sound/soc/aml/m8/snd-soc-odroid-dac.ko …
-
I've spent the entire morning trying to boot armbian on a vim 3 basic. It won't boot from sdcard. I erased the emmc with krescue, no change except now it doesn't boot anything, except the krescue sdcard. I put the armbian image on a USB stick and tried to flash it to emmc With krescue but krescue says it's an invalid vim 3 image. I verified the Sha and I also tried using the extracted dot img file. Which isn't recognized by krescue. How do I boot an sdcard or flash the emmc When none of these things work? The only thing that boots now is the krescue sdcard. What am I doing incorrectly? What else can I try?
-
Reputation Points
- 37 replies
- 19.6k views
- 1 follower
-
-
Hi everibody, I have an Armbian 25.2.3 bookworm fresh installed and I have some problem with IP route. In my network there is an DHCP server that serve the IP address and route to the client. The server is _isc-dhcpd-4.1.1-P1_. In my network there are multiple OS like Debian 12, ArchLinux, MacOS and Windows, all the clients get the IP configurations via DHCP without problems. The issue is reported only on the Armbian client and it concerns the configuration of the IP route. In the Armbian device is not created the default route and there are two IP route that not be exist and are also wrong. In the DHCP server I have the configuration for serve the…
-
Reputation Points
- 1 reply
- 2.6k views
- 1 follower
-
-
Hi all. Performance from my testing of playing video via VLC of a 1080p click (encoded at 10mbps) was very bad, unusable basically. Does anyone have any tips for programs or configuration to get reliable 1080 video running, ideally without having to use something inside of xwindows ?
-
Reputation Points
- 1 reply
- 2.7k views
- 1 follower
-
-
Hi, is there a way, how to check that image in download section is ok? I have Odroid HC4 with good PSU, both old and new card, flashed by Etcher and Rufus, keyboard plugged in USB, no SATA disks at the moment. I'm able to boot Focal 4.9 kernel (however with some errors after the boot). I've removed Petitboot with flasherase first, I've checked SHA checksum. Edit: File I've downloaded is: Armbian_20.11.6_Odroidhc4_focal_current_5.9.14.img.xz SHA: 9930f984eca2a72b3c22953ee6381c95da528b2a355dd9f429da38d1409f7b1f *Armbian_2 Any ideas what is wrong? Thank you.
-
I tried three way for hiding mouse, but not work: 1. Unclutter: ``` unclutter -idle 0 -root -display :0 `` It shows unclutter: could not open display 2. startx -nocursor -> not work 3. Using xbanish and boot from Systemd: ``` ~/.config/systemd/user/xbanish.service ``` [Unit] Description=xbanish After=default.target [Service] Type=simple ExecStart=/usr/bin/xbanish Restart=on-failure StartLimitBurst=10 RestartSec=30 [Install] WantedBy=default.target Is there any good way for hiding mouse on XFCE4 desktop (Armbian) ? Thanks
-
I have a ToupTek MU300 USB2 camera that I was trying to get working with my LePotato. The camera does not have native kernel support, but the manufacturer provides an SDK with a pre-compiled lib for x86/arm, and additionally I have a kernel module which works on X86/X64 with this camera as well as userspace libusb based code to access the camera. The camera is very sensitive to having buffers available during bulk transfer, otherwise the image will be corrupted. Generally synchronous bulk transfer is not fast enough, and requires multiple buffers supplied in asynchronous mode. On x86-64 and Rpi3/4, everything works as expected. I can grab im…
-
Reputation Points
- 2 replies
- 3.5k views
- 1 follower
-
-
Hi, please ignore my username, it's quite old. System is an odroid n2+. After updating the system (apt dist-upgrade) and updating linux-image-current-meson64:arm64 21.08.1 to 21.08.6, my sd card could not be mount anymore. New firmware was: linux-image-current-meson64=21.08.6 / 5.10.81-meson64 System runs from emmc. The 256gb sd card is used for more internal storage. Kernel message: mmc0: error -84 whilst initialising SD card - repeated every few seconds. Downgrade back to linux-image-current-meson64=21.08.01 / 5.10.??-meson64 (did not remember minor version while changing kernel in armbian-config): works again…
-
Reputation Points
- 7 replies
- 6.3k views
- 1 follower
-
-
The image listed here with xfce is broken: https://www.armbian.com/odroid-n2/ Example download link to broken image: https://mirrors.dotsrc.org/armbian-dl/odroidn2/archive/Armbian_22.05.1_Odroidn2_focal_current_5.10.110_xfce_desktop.img.xz
-
Every time i do umount of an nfs folder from a qnap nas i get an error in syslog similar to that attached, sometimes my board reboot after error I have Armbian 24.5.5 bookworm I need to mount using nfsv 4.0 or 3 because my nas doesnt support nfs 4.1 or newer. I use a command like this mount -t nfs -o nfsvers=4 -o minorversion=0 myqnapnas:/Backups /mnt I'm using official Armbian 24.5.5 bookworm image from armbian site on a khadas vim1s khadas_vim1s_error.txt
-
Reputation Points
- 5 replies
- 3.3k views
-
-
When I try to do "apt upgrade" on a brand new SD Card that has been just flashed I get a "kernel panic". This is the whole error: https://paste.debian.net/1283664 And this is the armbianmonitor -U log: https://paste.debian.net/1283662/ The board runs fine with debian with 4.9.x kernel supplied by manufacturer. Armbian is the second image I try because I need a newer kernel. I'll try to find one that is less new. Thank you for your support! EDIT: I tried again without wifi and it worked flawlessly. I can't make it crash with a wired connection. I used the same wifi plug with Debian and I never had an error but may…
-
Reputation Points
- 0 replies
- 2.1k views
- 1 follower
-
-
Hello everyone! I bought Khadas VIM1 board and Official FAN(Ali Link) but seems to be not working with Armbian Bullseye, how I can run it? Thanks.
-
Reputation Points
- 8 replies
- 5.4k views
-
-
Hi guys. I'm the maintainer for the Khadas VIM3. There are 2 small issue's with the Armbian images for VIM3, and also for VIM2. armbianmonitor -u http://ix.io/46L9 First off, the VIM3 has all its cores clocked to 1.5Ghz by default. I created a Jira for that a while ago. https://armbian.atlassian.net/browse/AR-1094 My simple fix is in /etc/default/cpufrequtils MAX_SPEED=15xxxxxxx → MAX_SPEED=2400000 But I have no idea how/where to adjust this so it is correct for all VIM3 images. Then for VIM2 and VIM3 (maybe VIM3L and VIM1 too) the HDMI audio isn't working as it should. https://armbian.atlassian.net/browse/AR-1095 I once was…
-
Reputation Points
- 5 replies
- 5.3k views
- 1 follower
-
-
I was trying Jammy (autobuild) with kerenl 5.15.18 on Khadas Vim3 4GB RAM, but is does not start, no HDMI output, no LED activity. Then I tried Hirsute with kerenl 5.13 and that boots fine, but after update new kernel (5.15) and also u-boot is installed and then it does not start again. My solution for now is to boot Hirsute with 5.13 and replace all edge packages with current (linux-dtb-current-meson64, linux-image-current-meson64, and linux-u-boot-khadas-vim3-current). This downgrades the kernel to 5.10.81, but the board can be updated and boots fine.
-
Reputation Points
- 6 replies
- 5.3k views
- 3 followers
-
-
Samples arrived ♥️ HW looks fascinating, Armbian is yet to be ported so can't comment how good this is in realworld. Its shipped with stock Khadas Ubuntu, kernel 5.4.y, which is good to boot something ... Technical specs at CNX.
-
board ist lafrite with 512mb, 8gb emmc tried all possible ports for i2c. first by configuring with armbian-config and activating i2c port a and b. then manual by writing an overlay to activate i2c_ao and deactivate the uart on pins 3+5; also tried pins 27+28; i2cdetect -y bus-nr (0, 1) never detected anything; i2cdetect -l gave me correct ports; i2cdetect -y for the hdmi-port allways worked.
-
Reputation Points
- 10 replies
- 6.3k views
- 2 followers
-
-
Hello, I have a La Frite 1gb. Im trying to boot armbian but it wont boot, I have checked the common problems list on the libre computer forum , It stated sd card, power supply etc. I have made sure that none of these are the problem, I have tried 5 different sd cards and im now using a 6th brand new Sandisk Extreme bought in the store (The one recommended by libre computer). I have tried many PSUs , All 5V 3.0A which is supposed to be enough, I get no help in the la frite forum so i thought i would check in with you guys and see if anyone knows what the issue could be. Also, id like to add, it wont boot anything, none of the images of ubuntu destkop, raspbian, etc f…
-
I've recorded Armbian_20.11_Lafrite_focal_current_5.9.6.img.xz to an usb drive and booted it on La Frite with the latest firmware u-boot-2020-07-r7.bin from http://share.loverpi.com/board/libre-computer-project/libre-computer-board/aml-s805x-ac/firmware/. Armbian boots but text is almost unreadable. I guess, I have to tweak some linux boot parameters but I don't know how to do this without GRUB. I tried holding u-boot button during a launch of the board but it gives no effect. How should I edit kernel parameters on La-Frite? Is there any other solution?
-
Reputation Points
- 3 replies
- 6.2k views
- 2 followers
-
-
Hi, I fixed the following issue for my own system for now, but wanted to let you know: After upgrading the LaFrite from Armbian Buster 20.08 to 20.11 using "apt upgrade" it didn't boot anymore. It showed a message "Ramdisk image is corrupt or invalid", so I checked /boot/uInitrd and it linked to uInitrd-5.9.6-meson64, which didn't exist. I fixed it by downloading the latest image and replacing everything in /boot except armbianEnv.txt with what was inside the image. Afterwards it booted again. I replaced everything, because the image apperently still is on linux 5.9.6, while vmlinuz and other files on my system showed 5.9.10. …
-
Reputation Points
- 4 replies
- 7.1k views
- 2 followers
-
-
Are there any plans of adding webcam drivers to the kernel modules for Le Potato? Specifically, I'm looking to use a uvc video webcam, but can't figure out how to compile it myself.
-
Reputation Points
- 4 replies
- 4.7k views
- 1 follower
-
-
Before I give it a try, has anyone already tried to write armbian to eMMC of the Le Potato ? If not, can you give me a hint where I shall read in order not to destroy the storage? * Thank you * it gets interesting from page 2 onwards
-
Reputation Points
- 127 replies
- 82.5k views
- 5 followers
-
-
Hello All, Have a question, I see there is an option to use eMMC with the Le Potato aml-s905x-cc 1gb (which I got running yesterday), but what eMMC modules actually work with this board (I'm using a MicroSD card on my board at the moment)? Perhaps there should be a thread for Le Potato Hardware Options (just a thought)
-
Le Potato is the first board from Libre.computer: https://libre.computer/products/boards/aml-s905x-cc/ Basic information is on the link above, here's the TL;DR: Raspberry Pi 2 form factor clone, with 64-bit quad-core Amlogic S905X 1 or 2 GB RAM eMMC and SD support HDMI 2.0 for 4k support 100 Mb Fast Ethernet Extra headers for I2S, UART, etc (nice feature I think) IR receiver Advertised to have low power consumption Powered via micro-USB based on: Amlogic P212 reference board Use Case: Media Player (retro gaming?) I've been using a board now for a few weeks, I ha…
-
Reputation Points
- 5 replies
- 11.3k views
- 1 follower
-
-
I'm not showing any network devices from ifconfig - just the loop back. The network lights are on, but not seeing anything in the /etc/network folders. What magic am I missing?
-
I bought a le Potato and an emmc module. The module fits fine on my odroid. The le Potato has the same connector gender as the emmc module however and cannot be connected. Do emmc modules come sometimes with male and sometimes female connectors?
-
So, I've been struggling to figure out the reason behind this problem. I have 4 Le Potatoes, all connected to a 100 mbps switch. Each of them have a 32 GB Samsung SD Card EVO. Initially, the problem was that my SSH session would hang at random usually when I download something. I can't SSH again unless I reboot the PI (I didn't bother waiting longer than 5min) Initially, I thought SD Cards were bad, I moved them around, done reinstalls. I'm also using SD Formatter to format them and Etcher to install them. Still, this freezing problem had no consistent behavior according to PI hardware or the SD cards.. For Power, I'm u…
-
Reputation Points
- 72 replies
- 33.9k views
- 3 followers
-
-
Hello, I'm new to this world of SBC. I'm trying to learn as much as possible, and I realize maybe I should have started with a better documented board like the rPI. I guess I just like learning the hard way. I'm trying to use the GPIO pins on the board. Starting with baby steps, I'm looking to just simply turn on/off an LED via GPIO. I've been searching and poking around the /sys filesystem to try to understand how this works, but I'm having a hard time understanding which pins to expose via the export file, and what physical pins those map to. I see /sys/class/gpio/ has two chips, 0 and 10. I see gpiochip0 has 10 pins, and gpiochip10 has 101. Is t…
-
Sorry if I ask, but I can't seem to find an actual definitive answer anywhere about this. Is there at the moment or will be in the future a way to have an hardware accelerated MATE desktop using armbian on le potato? And if there is/will be, what limitations does/would it have? (opengl/window compositing/video decoding/video encoding...) Thanks in advance
-
Reputation Points
- 0 replies
- 3.9k views
-
-
If I do i2cdetect -y 0 I don't see the device id I expect to 0x10 but I do see 0x30 and 0x50 which I shouldn't because there should only be one device at 0x10. I only see one i2c bus at /dev/i2c-0. Is that the i2c bus using header pins 3 and 5 which is where my device is attached? If not how would I enable the bus on pins 3 and 5?
-
Reputation Points
- 10 replies
- 10.6k views
-
-
Just built some fresh le potato images from master. Error message is Wrong Ramdisk image format. Console dump here: http://ix.io/2c0y I think it's related to stuff going on here, but not sure how to troubleshoot yet https://github.com/armbian/build/blob/master/config/sources/families/include/meson64_common.inc#L34
-
Reputation Points
- 1 reply
- 3k views
- 1 follower
-
-
I do an apt-get upgrade and seems to lock up at Get:30 http://ports.ubuntu.com xenial-security/main arm64 g++-5 arm64 5.4.0-6ubuntu1~16.04.9 [5,178 kB] 25% [30 g++-5 172 kB/5,178 kB 3%] 3,792 kB/s 26s everytime.. I used this image. Armbian_5.34_Lepotato_Ubuntu_xenial_next_4.13.8
-
Hello, I have been using the Le Potato for a while, and was able to save Armbian on an eMMC and boot from it. Then I tried putting another OS onto it but now it's no longer able to boot or recognize the eMMC module even when I go to Armbian settings. Please help me be able to use it again to continue tinkering around with it. Thanks very much!
-
Reputation Points
- 0 replies
- 2.4k views
- 1 follower
-
-
I am trying to use Le Potato OTG port in a device mode (connected it to the host through powered USB hub). DWC2, which I am used to from RPi Zero is missing, but I guess it's because there is a DWC3. However, if I just modprobe gadget driver, let's say g_ether, nothing happens - no new interface in ifconfig, no detection on the host. Should I somehow reconfigure DWC3 to operate OTG in a peripheral mode? # lsusb -tv /: Bus 02.Port 1: Dev 1, Class=root_hub, Driver=xhci-hcd/0p, 5000M /: Bus 01.Port 1: Dev 1, Class=root_hub, Driver=xhci-hcd/2p, 480M |__ Port 1: Dev 2, If 0, Class=Hub, Driver=hub/4p, 480M |…
-
Reputation Points
- 0 replies
- 3.6k views
- 1 follower
-
-
I've tried shutdown -h now, poweroff, shutdown -h, all results in a reboot instead of shutdown. I've searched and haven't found a solution, just other people with the same problem. I'm running "Armbian_24.2.1_Lepotato_bookworm_current_6.6.16_cinnamon_desktop.img", has anyone found a solution to this problem? I tried raspbian on the le potato and that will shut down but gives me other issues when installing openhabian. Armbian just seems to work otherwise but I'd like a clean way to shutdown when needed so I don't risk corrupting my sd card.
-
Reputation Points
- 5 replies
- 5.2k views
-
-
I am running Armbian 5.38 LePotato Debian Stretch next 4.14.14 and noticing some weird activities going on. When checking the syslog it was full of this stuff: Feb 23 06:25:29 localhost systemd[1]: Stopped Serial Getty on ttyS0. Feb 23 06:25:29 localhost systemd[1]: Started Serial Getty on ttyS0. Feb 23 06:25:39 localhost systemd[1]: serial-getty@ttyS0.service: Service hold-o ff time over, scheduling restart. Feb 23 06:25:39 localhost systemd[1]: Stopped Serial Getty on ttyS0. Feb 23 06:25:39 localhost systemd[1]: Started Serial Getty on ttyS0. Feb 23 06:25:50 localhost systemd[1]: serial-getty@ttyS0.service: Service hold-o ff time over, sch…
-
Reputation Points
- 20 replies
- 19.2k views
- 2 followers
-
-
Hello there! Are there any webcams that the Le Potato supports on Armbian? Thanks for the assistance!
-
So Le Potato (and Sweet potato) take about 10 seconds before reaching systemd. Is there a way to speed this up? I've tried putting boot_delay=0 as well as console=serial in armbianEnv.txt in hope of shortening the time in u-boot, but these didn't change anything. I've also tried building this image with no initramfs and no loadable module support.
-
Reputation Points
- 9 replies
- 5.8k views
- 1 follower
-
