Rockchip

Whats the SSH password? i plugged it in and can see the device grab an IP but the default username "pi" and password "armbian" does not work when attempting to ssh in.

Is there a method to boot with BSP kernel (the 4.4 kernel supplied by Rockchip/Radxa) on an existing install (jammy) to compare power usage to mainline kernel (5.15.y current or even 5.19.y rolling)? I tried using the switch kernel support in armbian-config, but the linux-image-legacy-rockchip64 4.4.213-rockchip64 just hung during early boot and had to recover to linux-image-current-rockchip64 5.15.69 . P.S. This is related to my question on the Radxa forums about reducing Rock Pi 4 B+ power usage.

Greetings to all! I want to share the news. 2020.07.21 Mainlinte U-Boot includes patches for Rock-Pi-N10. https://patchwork.ozlabs.org/project/uboot/list/?series=191290&state=* I am trying to build it and run. Everything compiles successfully, but during testing, an error occurs with an incorrect detection of the SDRAM size. On my model A (3GB RAM for CPU), 2 banks are detected at 1152, but it should be 1536. U-Boot SPL 2020.07 (Jul 25 2020 - 09:28:13 +0300) Trying to boot from MMC1 U-Boot TPL 2020.07 (Jul 25 2020 - 09:28:13) Channel 0: LPDDR3, 800MHz BW=32 Col=10 Bk=8 CS0 Row=15 CS1 Row=14/15 CS=2 Die BW=16 Size=115…

Hello everyone, i was thinking about running a jellyfin server on the Rock64, is there any chance for hardware encoding? Thank you in advance Regards

Dear all I have a question concerning the Tinker Board video playback function. Until now I used some raspberry PIs 3b to create a simple system that video playbacks in loop after booting for my video installations. Now as the raspberries are not in stock at the moment but i need very urgently another working system, i saw that i can buy the tinker board 2.0 for a reasonable price. However, I'm not a programming specialist and was happy when I got the raspberry to run, I couldn't found anything about the tinker board and specially about a video loop function. I imagine that it is possible, just wondering how complicated it is. Can someone tell me …

Hello. I am trying to have the 1-wire working on Rockpi4B+ on pin GPIO4_D6 (= number 158). I have this /boot/armbianEnv.txt: verbosity=1 bootlogo=true overlay_prefix=rockchip fdtfile=rockchip/rk3399-rock-pi-4b.dtb rootdev=UUID=aa1f4e9a-bad9-4760-87c5-511247ef7227 rootfstype=ext4 overlays=w1-gpio param_w1_pin=GPIO4_D6 param_w1_pin_int_pullup=1 usbstoragequirks=0x2537:0x1066:u,0x2537:0x1068:u but when I check on my board: sudo cat /sys/kernel/debug/gpio GPIOs 0-31, platform/pinctrl, gpio0: gpio-4 ( |bt_default_wake_host) in lo gpio-9 ( |bt_default_reset ) out hi gpio-10 ( |reset …

The NanoPi R4SE is similar to the NanoPi R5S. Would love to have an Armbian image for it.

Hello, I have been using Armbian OS on Rock Pi 4B. Full system is on NVME, not using SD card, and there is no eMMC chip on the board. During usage, I needed to shut it down improperly: by removing power cable, not through sudo shutdown now In the end I have following message during boot: Also, here is contents of dev folder: I was wondering if it is possible to fix this error. If not, I will reinstall with new image. Just spent much time on setting the environment, don't want to redo this all I would appreciate any help.

I planned to upgrade and skip current 5.18 (EOL) with edge 5.19 or just use LTS 5.15. Offcial images 5.19/edge (e.g. Armbian_22.08.1_Nanopct4_sid_edge_5.19.5.img.xz) won't boot at all, maybe a short uboot screen. Using uboot v22.04 like other rk3399 boards did not fix it. SInce the nanopct4.conf is boardfamily=media but also works with rockchip64 (which was changed some time ago), building with boardfamily=rockchip64 current 5.15 or edge 5.19 works fine, the cli builds boot as expected. Maybe a general question, which bordfamily fits now best to nanopct4. I remember exactly problems which were fixed bei 150balbes maintainer when pul…

I'm trying to understand the role of zram and having some difficulties with it. I've looked in several places and my understanding is this: - It's a block device in RAM that uses compression - It functions similar to swap I notice that mine is set to about 2 Gb: wurmfood@helios64:~$ cat /proc/swaps Filename Type Size Used Priority /dev/zram0 partition 1945084 0 5 My questions: 1. Does that mean 2 Gb of the device RAM is used for the zram swap device? 2. I can understand this on devices with slower storage, b…

System logs: http://ix.io/4bd2 I have been using Armbian OS with Rock Pi 4B. The problem with Rock Pi 4B is that it doesn't have a power-on/off button. So, for closed systems with no keyboard/UI, there is no way to shutdown/start the system properly. Only option is to disconnect the power cable, which has corrupted my OS few times(by the way didn't happen on Debian). I implemented shutdown function through MRAA library and by attaching a button to 40-pin GPIO header. But with this approach, system can go to sleep, but cannot wake-up through button because my software is not running. As I have understood, the best approach to have a proper button f…

Hi, i'm trying to compile an u-boot for my Rock-PI 4B. I wanted to apply a userpatch, that disables the uart debug console in u-boot. I seem to have an issue when using the Rock-PI together with a weather-sensor via RS485-Hat. Here is my patch: diff --git a/configs/rock-pi-4-rk3399_defconfig b/configs/rock-pi-4-rk3399_defconfig index be07b16bae..63d04ced6e 100644 --- a/configs/rock-pi-4-rk3399_defconfig +++ b/configs/rock-pi-4-rk3399_defconfig @@ -13,7 +13,7 @@ CONFIG_DEBUG_UART_CLOCK=24000000 CONFIG_SPL_SPI_FLASH_SUPPORT=y CONFIG_SPL_SPI=y -CONFIG_DEBUG_UART=y +CONFIG_DEBUG_UART=n CONFIG_SYS_LOAD_ADDR=0x800800 # CONFIG_ANDROID_BOOT_…

This feels really awkward, since I already asked about this problem in another part of the forum, but the bug reporting system says that bugs should be reported by posting in this section of the forum. Feel free to merge the other thread into this one if you want. (Link at bottom.) Linux kernel 5.15.x appears to have a serious regression that prevents GPIO from working correctly on the Rock Pi 4B+ (board version 1.73). Summary: All GPIO4A pins are nonfunctional: Pin 12 stuck off Pin 35 stuck off Pin 36 stuck off Pin 38 stuck off Pin 40 stuck off GPIO1B is nonfunctiona…

Hi, Have the r2s for some time and it worked well in the beginning. But then it started to freeze randomly. The logs do not have any error in it. Initially I thought it could be the interface drive problem, changed the interface and still freezes. When the r2s is frozen, serial port won't respond. Keeping serial connection and restarting the r2s, boot messages show normally. When I keep the serial connected, r2s do not freeze (tried for more than a week). Found this other post, not sure if this is the same problem as it does boot, but seems related. mUSB serial connection rarely works. Have to boot some times until it works. Although I am an exp…

Hello, I have recently bought a Helios64 item. I have mounted it, I have done all steps written on wiki here https://wiki.kobol.io/helios64/kit/ and here https://wiki.kobol.io/helios64/install/sdcard/ but when I try to follow this steps https://wiki.kobol.io/helios64/install/first-start/ USB to serial bridge is not detected by my notebooks (I have tried with notebook 1 (windows10 x64 with drivers downloaded and installed with exe setup) and notebook 2 (x86 cpu with last kernel ubuntu and windows xp)). I have unmounted the backplane cover, jumper P10, P11 and P13 (see here jumper description https://wiki.kobol.io/helios64/jumper/ ) are all opened so my question is: what is…

Actuaylly, I have a two problem. First is, If I print large outputs, It's out was unpredictable. $PS1 randomly added ...snip... ], "locs": [ "ALX", "SOP", "PNX", "NYC" ], "jbound": "0.010000", "tbound": "0.05" } ] } 20220908.04:53:56 root@openskyr2s:~# , <<<<<<--------------------- really randomly appeared my $PS1 in output / Even I use less/more, it sometimes happens. "val1": 4, "val2": 0, "subkey1": [ "blah" ], "filters": [ ...snip... Second is, Prints large outputs(jq , cat) to default console few times, I …

Hello, I am quite new to armbian build system. I have rock pi s v13 hardware. I want to change the default UART2 serial console port in Armbian for Rock Pi s to UART0. The reason is I need hardware flow control with one of my serial port. And UART1's RTS/CTS are muxed with UART2. And no other port exposed on Rock Pi s have the hardware flow control pins. Please guide me how I can achieve this.

I get no audio devices in Gnome/Jammy userland on an Armbian 5.18 kernel. From the console, alsamixer has controls for Analog RK809, but no Playback Mux for the speaker (mini jack) and changing the card Default to HDMI reports "This Sound Device Does Not Have Any Controls". The Gnome/Ubuntu audio applet has only a dummy device. Thanks!

Bluetooth device does not appear on my armbian (kernel is 5.17.5-media, tried on edge-media and current-media as well). # hciconfig version Can't get device info: No such device # bluetoothctl Agent registered [bluetooth]# devices No default controller available HCI socket does not seem to be created. Got this in dmesg: [ 11.990128] Bluetooth: HCI device and connection manager initialized [ 11.990145] Bluetooth: HCI socket layer initialized [ 11.990164] Bluetooth: L2CAP socket layer initialized [ 11.990188] Bluetooth: SCO socket layer initialized [ 12.081220] Bluetooth: HCI UART driver ver 2.3 [ 12.081245] Bluetooth: HCI UART pro…

Hello, so we use Kobol 64 with OMV since 4 months, and no problem at all. Just yesterday, want to change Ethernet cable, correctly shutdown the Helios64 NAS, and impossible to start it again. Just have the right system light, but left LED no blinking, no information in the USBC terminal. For the "recovery", press the recovery button, and then press the power button, and the LED System don't light up. What can we do, format the system, and reinstall OMV with all parameters... Not really serious, ins't it ? Thank you for any help. Regard.

Hi all, I have a nanopi m4 with following installation - Armbian_22.05.4_Nanopim4v2_jammy_current_5.15.48_xfce_desktop. I am looking for someone who has retroarch installed on armbian and fully working, and what the key steps are. Im asking because: 1) I tried installing by command line, which installs retroarch to a location with no cores. An issue with rk3399 cores is that there are none to download and must be built seperately (Is there a way to update a file so that cores can be downloaded through the application?) 2) In an attempt to build retroarch + cores, i downloaded and built libretro, which took probab…

(Note: this is crossposted from an ATS issue, since I think it might be quicker to get answers here. Will post on one thread when I get answers that work in the other) Have installed ats on my Rock64, running Armbian 22.05 Jammy with kernel version 5.10.63, and am having trouble getting the fan to spin. The fan I'm using is the one that comes with this case, and it spins when I connect it to a battery. One possible issue is that I had to manually add an entry for PWM_CTL: running sudo find /sys -name pwm\*, I get: /sys/kernel/tracing/events/pwm /sys/kernel/tracing/events/pwm/pwm_apply /sys/kernel/tracing/events/pwm/pwm_get /sys/kernel/debug/tracing/events/p…

Feels like this should be on here so everyone knows https://blog.kobol.io/2021/08/25/we-are-pulling-the-plug/

I'm not sure this is right place to submit libgnutls30 armbian package issues. If anyone libgnutls30 to 3.6.7.4-deb10u9, you may have trouble to connect some SSL destinations. I revert it back to 10u7, then problem was gone. 20220817.05:18:10 root@armbianr2s:~/lkm# echo -e "GET / HTTP/1.1\n\n\n" | openssl s_client -connect web.telegram.org:443 -tlsextdebug CONNECTED(00000003) ^C 20220817.05:18:47 root@armbianr2s:~/lkm# #SSL_CONNECTION_PROBLEM_SOME_SITES_AFTER_UPGRADE_libgnutls30_THEN_REBOOT; 20220817.05:19:03 root@armbianr2s:~/lkm# #PROBLEM_ALSO_HAPPENED_WHILE_tcptraceroute_THEREFORE_I_WAS_REALLY_CONFUSED_AND_WASTED_TIME. BECAUSE, tcptrace and python N…

Hello everybody! From what I found there’s no rockchip64 (is that the right one for rk3568?) header for 5.10.110. Since the current Kernel is that version can somebody help me either build or point me to right header files? That would be much appreciated

Running latest Jammy image and trying to attach USB to SATA 3 SSD. I tried two different USB 3 to SATA adapters and they both show up in lsusb: Bus 005 Device 002: ID 2109:0711 VIA Labs, Inc. VL711 SATA 6Gb/s bridge sudo fdisk -l doesn't show drive, but I can plug into my desktop and it mounts disk. Could be related to https://github.com/MichaIng/DietPi/issues/5378

Hello everyone, I want to use uart4 port for zigbee2mqtt,but I don't know how to activates it.

Hello, I installed Armbian 22.05.3 Jammy on a Rock Pi 4A+. Unfortunately 3 out of 4 USB ports do not work; only the USB 3.0 OTG port works. I tried using the Debian Buster download from Radxa, and all four ports work. Any suggestion on how to fix this with Armbian?

I just cannot access spi on my Rock64. I read a couple posts of it but none works out for me I'm running Armbian 22.05.3 Focal with Linux 5.15.52-rockchip64 on it. Tried enabling spi-jedec-nor and spi-spidev overlay, but with none of them I get output when executing ls /dev/spi*. Is it maybe a hardware issue, reading this post suggests that to me: https://forum.pine64.org/showthread.php?tid=5473&pid=34616#pid34616 But I cannot make much sense out of it. Can anyone help me get spi working?

Hi, I tried the new Bullseye image from https://www.armbian.com/station-m1/ to check bluetooth support but nothing is displayed on the screen at boot. No video signal come from the Station M1. The TF card used works with other images. Any hints ? Chris

I hope I am posting this in the right forum ? Just installed Armbian 22.05 Jammy XFCE. No audio either from the main board jack or the HDMI. Tested by playing mp3 with MPV and Celluloid as well as with Chromium Capture from armbianmonitor - U attached below or here http://ix.io/457n Any hints would be appreciated...I don't know how to investigate further this. No_Audio.txt

Armbian version 22.05.3 Focal Nanopi M4V2 There seem to be only default modes available with the nanopiM4V2. Manual adding a resolution does not work (it is added, but has no effect when selected) NanoPIM4V2 Screen 0: minimum 320 x 200, current 1920 x 1080, maximum 4096 x 4096 HDMI-1 connected primary 1920x1080+0+0 (normal left inverted right x axis y axi> 1920x1080 60.00* 60.00 50.00 1920x1080i 60.00 50.00 1280x1024 60.02 1280x960 60.00 1280x720 60.00 50.00 1024x768 60.00 800x600 60.32 56.25 720x576 50.00 720x480 59.94 The monitor is a …

Today I flashed the latest version CLI Jammy img instead of my old OS.First system boot,I can get the IP from my router DHCP and I can ping the Board's IP,but SSH connection refused.Now the Latest System won't start SSH service in first boot?I haven't a monitor,so I cant check the system booted or not.

All armbian images with 5.x kernel are not working for me. I found working variant of 5.x kernel here - https://github.com/qxhome/rk3568-kernel5.10-alldrivers but it have problems with firewall and docker Does anybody have other variants?

Hey there, had anyone any success enabling PWM to control a PoE hat [1]? I tried a few overlays but no luck. ``` rock-3a-worker-1:overlay:# cat /boot/armbianEnv.txt verbosity=1 bootlogo=false overlay_prefix=rk35xx fdtfile=rockchip/rk3568-rock-3a.dtb rootdev=UUID=f0751d3c-c5c2-4ced-a989-772c2ad130a4 rootfstype=ext4 overlays=w1-gpio i2c7 i2c8 extraboardargs=nvme_core.default_ps_max_latency_us=0 usbstoragequirks=0x2537:0x1066:u,0x2537:0x1068:u ``` I also built mraa with the following: ``` IMRAA=ON FTDI4222=OFF BUILDCPP=ON BUILDTESTS=ON BUILDSWIG=ON USBPLAT=ON ONEWIRE=ON INSTALLTOOLS=ON BUILDSWIGPYTHON=…

Hi everyone, After the last armbian update with a new kernel does the internal networkcard not work anymore! Luckely does a USB NIC work and can i run everything but on only 100Mbps iwonstead of 1Gb of the internal NIC. What i remember did this problem also a few years ago happen. I have pasted all the required info to pastebin because armbianmonitor -u does not work. I got an error that network is not availble. Thank you all for you support!

Hi all, For the past few days, I've been trying to SSH into my NanoPi Neo3, but I keep getting the "Incorrect password" error. My set up: Load a supported Armbian image onto a 16GB, class 10 micro SD card using balenaEtcher. https://armbian.hosthatch.com/archive/nanopineo3/archive/Armbian_21.08.1_Nanopineo3_focal_current_5.10.60.img.xz Connect the NanoPi to my laptop, with a shared internet connection (Please note: It connects just fine. I've tried with a manual and automatic DHCP connection, and in both cases, been able to obtain the IP address). Insert the micro SD card. Plug in the power cord, and wait for th…

Dear maintainers, Guess some device tree issues with neo3 got me into this mess, since rk3328-nanopi-neo3-rev02.dtb is missnig. Scanning mmc 1:1... Found U-Boot script /boot/boot.scr 3185 bytes read in 7 ms (444.3 KiB/s) ## Executing script at 00500000 Boot script loaded from mmc 1 428 bytes read in 6 ms (69.3 KiB/s) 12514638 bytes read in 556 ms (21.5 MiB/s) 30083584 bytes read in 1326 ms…

PI-co ITX form factor(2.5 inch, 100 x 72mm) RK3588 powered, 8nm manufacturing process Quad A76 2.4Ghz + Quad A55 1.8Ghz Mali G610MC4 GPU(up to 5 channel 4K UI) 6T NPU 8K 10bit decoder, 8K encoder Support WiFi 6E and BT5.2 Support PCIe 3.0 x4 NVMe SSD Triple display support(with HDR) Two HDMI 2.1up to 8K@60FPS One USB C with DP up to 8K@30FPS HDMI in support up to 4K@60FPS 2.5G Ethernet with PoE support Offer 4GB/8GB/16GB(LPDDR4x) ram options

My NanoPi M4V2 wont boot. It has a solid red light no green at all. I cant access it with SSH. I went through the troubleshooting checklist available for the NanoPi in regards to the red light. Nothing was solved. I tried different SD cards with different types of images and different types of burners. Nothing works. I know that the SD cards, images, and burners are not the problem cuz I tested it on a Raspberry Pi with no problems.

(only rockpi-4a tag available..) After enabled `rpi-7inch-lcd` overlay, rockpi-4-b-plus doesnt boot, no display, no ip. Before reboot: root@rockpi-4c:/home/qnet# cat /boot/armbianEnv.txt verbosity=1 bootlogo=true overlay_prefix=rockchip fdtfile=rockchip/rk3399-rock-pi-4b.dtb rootdev=UUID=072c27ac-4335-4062-9b8d-a9d0a71d6c3a rootfstype=ext4 usbstoragequirks=0x2537:0x1066:u,0x2537:0x1068:u overlays=rpi-7inch-lcd root@rockpi-4c:/home/qnet# sudo reboot root@rockpi-4c:/home/qnet# Thank you!

Since Linux 5.15, the USB3 port on ROCK64 does not work anymore with Armbian. The following kernel errors are shown: usb 5-1: USB disconnect, device number 2 [...] usb usb5-port1: Cannot enable. Maybe the USB cable is bad? This has been reported by multiple users with multiple drives and cables, also disabling UAS does not help. lsusb shows the drive/device, but lsblk does not. I know the ROCK64 is not currently supported by Armbian/has no maintainer, so I'm not expecting anything, just posting this as information and probably someone with more insights into the rockchip64 kernel build has an idea or workaround.

Hi Is it possible to install the system on NMVE M2 ? Or how to completely transfer the SD card OS to NMVEIs it possible to install the system on NMVE M2 ?

I have an orangepi 4b rk3399 board and I am not able to boot with an armbian image above kernel 5.0 . until kernel 4.4.2.1.3 it boots but no usb port works and if you update the kernel it doesn't boot anymore. Can someone help me.

Good job with Armbian, I just can't find the power management, DevTerm A06 has batteries. Maybe I'm blind, please tell me where to look.

Hi ! Is there any chance to flash an armbian to the 16MB SPI Flash-Chip? regards, volker.

First Rockchip RK3399 based board from Orangepi maker - under development, not much news except what can be scrapped from pictures. Chip: http://rockchip.wikidot.com/rk3399

I have a weird issue where I have everything working as I want it a few different services running in docker (Pi-Hole, Motioneye, Home Assistant, Emby) and all their individual management pages are accessible. However as soon as i move the install over to emmc, all networking seems to break, with services no longer working, but some admin pages report everything is fine. Pi-Hole for example shows as running but no devices accessing the dns cant load webpages and the pi-hole management pages stop showing any further queries received. ive repeated the process of doing a clean install to sd , everything fine. move to emmc stops working ☹️

https://github.com/sigmaris/u-boot First I tried the mainline uboot v2022.04 version and the sigmaris uboot, in the uboot command line I executed the nvme info command and found no nvme devices available. https://github.com/radxa/u-boot Since the radxa version does not have the relevant configuration files for nanopc-t4, the compilation and testing of the radxa version is abandoned. Is the patch in this thread for the mainline v2020.04 release? @piter75 @Hover

Hi I`m trying to set NAS server (OMV) on nanopi M4v2 with sata HAT and eMMC. I have instaled OMV but it is working realy slow and I want to make another clean install. I`m using Armbian Buster from here https://www.armbian.com/nanopi-m4-v2/ I`m tryng now for 4 hours to boot from fresh made SD card but I always end up on eMMC module. If I unplug module I can boot from SD card. I was trying Recovery key and PWR key combination but with no luck What can I try next. Thank you for help!

I use orangepi 4B. I use console Ubuntu with kernel 4 from Xunlong And my CPU Temperature (by htop) is about 70°C I use console armbian with kernel 5 (Governor = powersave). And my CPU Temperature is about 79°C Why so? I want to get 70°C in armbian too.

Good morning, I'm using RK3328 SOM-EVB by Olimex with Armbian 22.02.0-trunk with Linux 4.4.213-rockchip64. I'm using it with an HDMI LDC 7" capcaitive touchscreen by Waveshare (https://www.waveshare.com/product/displays/lcd-oled/lcd-oled-1/7inch-hdmi-lcd-h.htm). I can't rotate the LCD in portrait mode. In Application->Screen the "Rotation" section is "none" and there aren't any other choice (like left, right, inverted). If in command line I use: xrandr --output HDMI-1 --rotate left it gives me back: xrandr: output HDMI-1 cannot use rotation "left" reflection "none" Does anybody knows how to solve it and rotate the …

Hi there, now I have pure bug report: done apt update + apt ugprade, GUI frozen, even no SSH, about an hour later (I was outside my house) (probably) restarted but up to multiuser, no GUI at all. Howeve I CAN log over SSH, sthe issue "startx", but ONLY as ROOT. (much indesired, as ex web browser should never be started as root). I can enable remote X in /etc/X11/xinit/xserverrc , then start remote X session. Also "init 5" attempts to start X, but crashes. How to diagnose and repair? Laurent

Hi, any hope to have a 5.x server image with support for the M1 bluetooth soon ? Chris

Hello People. First of all, thank you to all the people that puts work and time into this project. It's my first time posting here. I've been trying to solve this problem by myself since this board it's unsupported now, but I had no luck. The thing it's, I can't get the linux to recognize properly the PlutoSDR, I get this errors in dmesg. [ 19.885514] usb 4-1: new high-speed USB device number 6 using xhci-hcd [ 20.035134] usb 4-1: Dual-Role OTG device on non-HNP port [ 20.035310] usb 4-1: set a_alt_hnp_support failed: -32 [ 20.161463] usb 4-1: new high-speed USB device number 7 using xhci-hcd [ 20.311139] usb 4-1: D…

Hey guys, looks like there's no support for board serial number in latest images for Station M2. Serial number on rk356x is coming from otp memory, so: 1) there are no bindings for `otp` and `cpuinfo` devices in .dts, like here 2) there are no kernel driver to extract data from otp memory, like here I'm ready to contribute, but not sure what's the future plan for those.

Hi, is it possible to switch off the GPU of the Station M1 to reduce power in headless server application ? Chris

Board Dimensions: 90mm x 122mm x 16mm Heatsink Dimensions: 100mm x 123mm x 19mm Weight: 253 g including heatsink Rockchip RK3568 Processor L1 instruction cache: 32 KB, 4-way set associative (128 sets), 64 byte lines, shared by 1 processor L1 data cache: 32 KB, 4-way set associative (128 sets), 64 byte lines, shared by 1 processor L3 data cache: 512KB , 16-way set associative (512 sets), 64 byte lines, shared by 4 processorsQuad-Core Cortex-A55 (1.992GHz) ARMv8-A architecture with Neon and Crypto extensions Mali-G52 MP2 GPU with 4 x Execution Engines (650Mhz) 0.8Tops@INT8, integrated …

SoC: Rockchip RK3568B2 CPU: Quad-core ARM Cortex-A55 CPU, up to 2.0GHz GPU: Mali-G52 1-Core-2EE，supports OpenGL ES 1.1, 2.0, and 3.2, Vulkan 1.0 and 1.1, OpenCL 2.0 Full Profile VPU: 4KP60 H.265/H.264/VP9 video decoder, 1080P60 H.264/H.265 video encoder NPU: Support 0.8T RAM: 2GB LPDDR4X Flash: 8GB eMMC Ethernet: one Native Gigabit Ethernet, and two PCIe 2.5Gbps Ethernet USB: two USB 3.2 Gen 1 Type-A ports HDMI: support HDMI1.4 and HDMI2.0 operation support up to 10 bits Deep Color modes support up to 1080p@120Hz and 4096x2304@60Hz support 3-D…

Perhaps someone will be interested in this information. https://www.stationpc.com/thread-84-1-1.html

Good news. Full-fledged working images (20210827) of ArmbianTV for P2 and M2 are ready. All the equipment works in them and you can start and configure the system via an HDMI monitor and a keyboard/mouse. M2 https://disk.yandex.ru/d/OBDO8BU2y1M6ug https://users.armbian.com/balbes150/rk3566/ P2 https://disk.yandex.ru/d/neKXsYolKXgLzg https://users.armbian.com/balbes150/rk3568/

The binaries supplied with the ArmBian release for the Rock Pi 4 work great. However, when I try to build my own from Mainline sources, I see lots of booting issues. Do you use Rockchip provided binaries, or are they built from scratch? Any help would be gratefully received.

Cannot connect to wifi via on-board wifi on Station P1. External USB WiFi controller (rtl88x2bu) works fine on the same board $ cat /boot/extlinux/extlinux.conf label Armbian kernel /boot/Image initrd /boot/uInitrd fdt /boot/dtb/rockchip/rk3399-roc-pc-plus.dtb append root=UUID=d98925da-408f-480e-b729-321ddcdbd2b8 console=ttyS2,1500000 console=tty0 rw no_console_suspend consoleblank=0 fsck.fix=yes fsck.repair=yes net.ifnames=0 bootsplash.bootfile=bootsplash.armbian $ uname -a Linux station-p1 5.15.25-media #22.02.1 SMP PREEMPT Sun Feb 27 09:07:40 UTC 2022 aarch64 GNU/Linux $ journalctl -u NetworkManager ... …

Hello, I received recently an Helios64 from a new friend, However, when I get home, I plug it in, turn it on (already I have to press the power button for 4 seconds to get some life) and I get the following LEDs lit up: - LED1 - LED2 - LED3 - LED5 - LED6 i got nothing on the serial line (tested on MacOS and Windows), and no reaction when I do quick and long press on Recovery nor Reset. Is there some electronic schematic that could help me to debug hardware or procedure to get JTAG access to the RK3399 ? Regards,

@Contributor/Maintainer AR-1172 - fix complete 08 May 2022 There is was a bug in the 5.15, 5.16 and 5.17 kernel r8152 driver that affected RTL8153b Gigabit USB Ethernet (LAN0) on the Orange Pi R1plus LTS and other boards. The bug only presents on high load and I can trigger it reliably with bidirectional high load on Orange Pi R1plus LTS. The bug kills the RX interface and it requires power down to reset. I assume that it also affects the Orange Pi R1plus, and there are reports of it affecting NanoPi R2S. I would assume that other boards could be impacted. My proposed fix is to revert the driver back to the version used in 5.10 kernel (and to disa…

Hey guys. I have helios64 with 5x WD14tb red pro.... and ZFS fs. but currently im out of free space I want to extend somehow my storage pool. I'm wonder if it's possible to buy additional storage enclosure like from QNAP ( TL-D800C) - JBOD 1 x USB 3.2 Gen 2 type C and put additional 8x HDD I wanted to create additional ZFS pool raidz1 Do You think it will work?

NanoPi-M4 will be cheaper and same form factor as RPI 3.

Hello, My NAS becomes unresponsive every time I run a somewhat CPU-intensive task: indexing photos in photoprism, importing followings in Mastodon… or just browsing Mastodon. Is it expected of the Rockchip RK3399 or can I improve the situation with the right CPUfreq config ? For context, here is my CPUfreq config and kernel (I have yet to update): axel@helios64:~$ cat /etc/default/cpufrequtils ENABLE="true" GOVERNOR=performance MAX_SPEED=1200000 MIN_SPEED=1200000 axel@helios64:~$ uname -a Linux helios64 5.10.21-rockchip64 #21.02.3 SMP PREEMPT Mon Mar 8 01:05:08 UTC 2021 aarch64 GNU/Linux Thanks!

Not sure if this is the place for this since it isn't really a software issue, but... So I decided to take apart my Helios64 to apply the 2.5Gb/1Gb Ethernet fix and things went badly. I ended up accidentally destroying the 402 caps on one of the SATA ports by scrapping the board against the standoffs as I was pulling it out of the case. As far as I can tell, they should be part of the SATA standard, 10nF DC blocking caps, so I have a rough idea of what they might have been but I don't know for sure since they are simply gone. Does anyone happen to know what those caps were or have access to a circuit diagram or BOM I could referenc…

even though I disabled DVFS : $ cat /etc/default/cpufrequtils ENABLE="true" GOVERNOR=conservative MAX_SPEED=1416000 MIN_SPEED=1416000 I had a few random reboot. I disabled zswap and , since I get this kind of trace about it: mars 30 22:15:29 helios64 kernel: ------------[ cut here ]------------ mars 30 22:15:29 helios64 kernel: kernel BUG at mm/zswap.c:1313! mars 30 22:15:29 helios64 kernel: Internal error: Oops - BUG: 0 [#1] PREEMPT SMP mars 30 22:15:29 helios64 kernel: Modules linked in: binfmt_misc softdog veth xt_nat xt_tcpudp xt_conntrack xt_MASQUERADE nf_conntrack_netlink nfnetlink xfrm_user xfrm_algo xt_addrtype iptable_filter iptable…

I'm running armbian 10.5 (kernel 5.8.6-rockchip64) on my new NanoPi R2S. I configured it as a router: lan0 (USB ethernet) is the LAN interface, eth0 (real ethernet) is the wan interface, ip forwarding enabled. On the LAN subnet I put a iperf3 client, on the WAN subnet I put a iperf3 server. Launching iperf -c _server_ip_ on the client is ok, I can reach 830Mbps, but launching iperf with -R (reverse) makes the lan0 interface to reset/disconnect. I can find the following logs in the kernel: Sep 8 20:53:32 gw kernel: [ 611.981696] ------------[ cut here ]------------ Sep 8 20:53:32 gw kernel: [ 611.981726] NETDEV WATCHDOG: lan0 (…

Hello! I have NanoPi M4 V2 4GB with EMMC installed (no sd card currently) and i got device bricked after installing updates. Here is the logs via TTL : Spoiler DDR Version 1.24 20191016 In channel 0 CS = 0 MR0=0x98 MR4=0x3 MR5=0xFF MR8=0x8 MR12=0x72 MR14=0x72 MR18=0x0 MR19=0x0 MR24=0x8 MR25=0x0 CS = 1 MR0=0x18 MR4=0x3 MR5=0xFF MR8=0x8 MR12=0x72 MR14=0x72 MR18=0x0 MR19=0x0 MR24=0x8 MR25=0x0 channel 1 CS = 0 MR0=0x98 MR4=0x3 MR5=0xFF MR8=0x8 MR12=0x72 MR14=0x72 MR18=0x0 MR19=0x0 MR24=0x8 M…

Hi to all, after the 16GB of the eMMC is slowly reaching my limits, I installed a 128GB M.2 SSD and wanted to use the kobol tutorial to transfer the system data on it... https://wiki.kobol.io/helios64/install/transfer/#transfer-rootfs-from-emmc-to-sata-or-usb ... unfortunately I see at position 4 only /dev/md0 instead of the M.2 Sata on /dev/sda root@helios64:/dev# lsblk NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT sda 8:0 0 119.2G 0 disk sdb 8:16 0 3.7T 0 disk └─md0 9:0 0 7.3T 0 raid5 /srv/dev-disk-by-label-nas sdc 8:32 0 3.7T 0 disk └─md0 9:0 0 7.3T 0 raid5…

Like many others, I get constant reboots with my Helios. I'm not sure it's worth me posting logs as a number of people already seem to be doing that. My question is, does anyone have a stable system? If so what OS and kernel are you using? I don't care about latest and greatest features, I just want it to stop hard rebooting.

Hi, I'm using a RockPi 4 B as a wifi access point. Everything is working fine with good performances until the Wifi stop working, usually after 3-4 days. When that happens, dmesg is flooded with these logs : [221057.075187] ieee80211 phy0: brcmf_proto_bcdc_query_dcmd: brcmf_proto_bcdc_msg failed w/status -110 [221057.075202] ieee80211 phy0: brcmf_cfg80211_get_station: GET STA INFO failed, -110 [221124.657840] ieee80211 phy0: brcmf_proto_bcdc_query_dcmd: brcmf_proto_bcdc_msg failed w/status -110 [221127.217786] ieee80211 phy0: brcmf_proto_bcdc_query_dcmd: brcmf_proto_bcdc_msg failed w/status -110 [221127.217806] ieee80211 phy0: brcmf_cfg80211_get_stat…

Can't enable (using armbian-config) GUI ("desktop") without enabling 'auto-login". If I try to do so, GUI simply doesn't start. OrangePi 4 (not B), Armbian Buster. Which log shoud I look for info / include on forum?

I have a recovery issue. I have successfully flashed an image on to my RK3399 SOM, but I made a mistake on the USB, so am trying to correct the error, but I have no USB communication when I boot into recovery mode. When I boot into recovery mode, it reports: "'recovery' does not seem to be a partition nor an address Unable to boot:recovery". It also tries to find a backup partition: "'backup' does not seem to be a partition nor an address Unable to boot:backup" then suggests I start rockusb: "try to start rockusb", but I have no USB. I have tried with several different computers and USB cables, but there is no USB! I assume that the boot file for recovery mode are no…

Hello, I had a NanoPi M4v2 running 5.10.63 (buster) for a while without issue. Both I2C and SPI were working perfectly fine and the system was stable. Today apt updated the kernel to 5.15.25 and it broke multiple things, the first issue was that the network wasn't working properly, yellow light but not green one / no IP requested from the local DHCP server. The overlays on this system were: overlays=dwc3-0-host i2c7 i2c8 spi-spidev overlays=dwc3-0-host i2c7 i2c8 spi-spidev I connected the eMMC moule to a card reader and removed the overlays one by one and found out that `i2c8` was breaking my boot / network: overl…

Hi! I am trying the vanilla 5.15 kernel which has support for helios64. The system is booting, disks, MMC and network are working. But fancontrol fails. It seems the /sys entries have changed and the udev rules are not working. I've tried to understand the wiki page in order to adapt the udev rules and fancontrol config file but I am a little bit lost. Is there updated versions of those config files? Kind regards, Xavier Miller.

My nanopi m4b has been showing slowness problems that I believe to be caused by the ethernet, I access a site inside it that has a camera stream and sometimes it is slow, and now the connection via ethernet completely stopped working, I looked for something in the logs but I didn't find anything that could indicate the problem, I can access my site over wifi

I have tried the following: ------------------------------------------------------------------------ CONVERT dtb to dts ------------------------------------------------------------------------ dtc -I dtb -O dts /boot/dtb-4.4.192-rockchip64/rockchip/rk3399-rockpi4b.dtb -o /boot/dtb-4.4.192-rockchip64/rockchip/rk3399-rockpi4b.dts ------------------------------------------------------------------------ EDIT dts ------------------------------------------------------------------------ nano /boot/dtb-4.4.192-rockchip64/rockchip/rk3399-rockpi4b.dts ---------------------------------------------------------------------------------- uart4 e…

Hi there, I have a rockpi 4b running armbian bionic desktop legacy kernel 4.4y on a 128 GB emmc module, I’d like to use this machine as a server. I was just tinkering around with Plex, .bashrc and crontab while all of a sudden the keyboard mapping over RDP changed (e.g. > became ;, ~ became @ etc) (indication of the problem?). I tried to fix this by changing the system keyboard layout and running dpkg-reconfigure keyboard-configuration, this all didnt work. I decided to reboot the machine to see if that would work. After the reboot I could not connect to either RDP or SSH so I decided to connect the machine to a HDMI monitor. This resulted in the following o…

Using P14 in the documentation (https://wiki.kobol.io/helios64/usb/#serial-console) I am unable to get a serial connection to work. Has anyone been able to get UART2 debug Serial working using P14 and an FT232 USB cable? With Kobol plug pulled looking to just have this run in DAS mode over USB-C to still get use without fear but still need to maintain serial console to monitor booting as it sometimes locks up on boot. Downclocking to 1Ghz or below conservative seems to do a lot better but still looking to have remote debug console. When I try to connect I just get the follow error and no output. pl2303_get_line_request - failed: -32

Updated Armbian on Rock64 today, then lightdm stopped working. After peeling the layers it appears to come down to Xorg giving signal 11 "Segmentation fault" /usr/sbin/lightdm --debug [+0.12s] DEBUG: XServer 0: Launching X Server [+0.12s] DEBUG: Launching process 2575: /usr/bin/X -core :0 -seat seat0 -auth /var/run/lightdm/root/:0 -nolisten tcp vt7 -novtswitch [+0.12s] DEBUG: XServer 0: Waiting for ready signal from X server :0 [+0.12s] DEBUG: Acquired bus name org.freedesktop.DisplayManager [+0.13s] DEBUG: Registering seat with bus path /org/freedesktop/DisplayManager/Seat0 …

Hello, I have a strange behavior with my nanopi r2s. I got the official armbian (buster) image with Openmediavault and docker along with portainer. I run qBittorrent as a container. When i start a torrent download the r2s crashes sporadically. The issue is observable only when a torrent is being downloaded..The crash happens sometimes almost immediately after boot up when the download process is resumed, but sometimes it can take a whille. Sometimes it is event possible to complete the download. I've got a nice class 10 sandisc 32 gb and a 256 SSD plugged in a usb 3.0 dock with external power supply. The r2s power is also pretty good but tested with different …

I've gotten the following messages/error the past 2 mornings. Any ideas what the problem is? CRON-APT RUN [/etc/cron-apt/config]: Sat Jan 22 07:35:28 EST 2022 CRON-APT SLEEP: 1394, Sat Jan 22 07:58:42 EST 2022 CRON-APT ACTION: 0-update CRON-APT LINE: /usr/bin/apt-get update -o quiet=2 E: Failed to fetch https://stpete-mirror.armbian.com/apt/dists/buster/main/binary-armhf/by-hash/SHA512/5d6932f3c06c2c055d95b7a09e2bd4686b4bf8756d10bb52c9c9b96b33f1adde18116d55152d9c103d1e24ef83acecdddfc32a945b60812b6818b2be5a48458c 404 Not Found [IP: 130.225.254.116 80] E: Failed to fetch https://imola.armbian.com/apt/dists/buster/main/by-hash/SHA512/1b7ba13d5e752b8c1035070d43466…

Hello, When I comment device via USB 3.0 I see it: ender3@ender3:~$ lsusb Bus 005 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 004 Device 002: ID 1d50:614e OpenMoko, Inc. Bus 004 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub However with pins GND, DP1, DM1, +5V Bus 005 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 004 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID …

This is a continuation of ata1.00: failed command: READ FPDMA QUEUED noted by @djurny. I've experienced the same issue, and have some additional data points to provide. My observations so far: I'm using WDC WD60EFRX (68MYMN1 and 68L0BN1) drives The drives were working without issue previously behind a ASMedia ASM1062 SATA Controller, I've also used some of them behind ASM1542 (external eSATA enclosure) I can reproduce the issue on a clean install of Armbian 20.08.21 Buster and Focal I can reproduce via simple `dd` to `/dev/null` from the drive so filesystem does not seem to be the underlying cause Every drive is affected (i.e. e…

Board orangepi4b uname -a Linux orangepi4 5.10.63-rockchip64 #21.08.2 SMP PREEMPT Wed Sep 8 10:57:23 UTC 2021 aarch64 GNU/Linux Got syntax error on armbianmonitor -u: armbianmonitor -u "System diagnosis information will now be uploaded to syntax error at or near "" Please post the URL in the forum where you've been asked for" set -x armbianmonitor -u Network/firewall problem detected. Not able to upload debug info. Please fix this or use "-U" instead and upload whole output manually attached file err is output from armbianmonitor -U Anyway I had to reflash after a microSD broke. Previously I used 4.4.…

Hello, I think this is my first post here. I am trying to operate an Epson L4150 on-board Rock pi4 b multifunction printer. I was successful in running the printer. But the scanner is another story. Xsane does not recognize it. I have been trying to install the driver which is downloaded from the Epson page, but it is for armhf. I tried a dpkg --add-architecture armhf, then update, but when I try to run install.sh from the Epson driver, it throws error: E: Failed to locate package libboost-filesystem1.58.0 Somebody could help me? Thank you

I recently plugged in a 4TB Seagate Expansion hard drive and it worked fine. After rebooting the Rockpi4B via 'sudo reboot' the drive is not recognised - dmesg shows: [ 3.877060] sd 1:0:0:0: [sdb] Unit Not Ready [ 3.877082] sd 1:0:0:0: [sdb] Sense Key : 0x4 [current] [ 3.877094] sd 1:0:0:0: [sdb] ASC=0x44 <<vendor>>ASCQ=0x81 Any ideas?

If Helios/Kobol is out of business - What "specs" should I use to define a replacement board - a rockchip 3399 board with the dimensions ? Help please -- (I'm getting an increased number of memory errors and of late an increased number of USB faults) I'm running (at the moment) - the system as a simple NAS with exported NFS4 volumes - the entire lot of 5 drives are formatted at BTRFS -- I'm working on archiving the data off and once done I'll format all as ext4 and try using simple RAID. Rich Leonard

Hello, I have an ARMBIAN image 08.21.6 kernel 5.10.16 it works very well on rockpi 4B + rev 1.6 I tested the last Kernel but without more success. when we fix the ip address and we up (several times) the eth0 network this one puts to work at a time. Do you have an idea ? Regards.

A few Armbian packages were updated (armbian-bsp-cli-helios64, armbian-config, armbian-firmware &armbian-zsh) to version 21.05.08. At some point I noticed that the fancontrol service had failed to start up after the reboot - it was complaining about a file missing(/dev/thermal-cpu). If you run into this after the update, just update your /etc/fancontrol to the content below and your fancontrol should go back to normal. # Helios64 PWM Fan Control Configuration # Temp source : /dev/thermal-cpu # After 21.05.08 [2021.08.10] # Temp source : /dev/thermal-board INTERVAL=10 # FCTEMPS=/dev/fan-p6/pwm1=/dev/thermal-cpu/temp1_input /dev/fan-p7/pwm1=/dev/th…

I loaded both the Raxda Debian OS and the Armbian OS on the Rock Pi 4A+ (4GB RAM / 32GB eMMC) integrated eMMC chip and both boot fine. I then ran the Phoronix pts/scikit-learn benchmark and got a big discrepancy in performance: https://openbenchmarking.org/result/2112285-NE-2112281NE08 The Raxda Debian OS (noted as rockpi4a+raxdadebian in the benchmark) performs basically the same as the Rock Pi 4A version (noted as rockpi4-rk3399 running Armbian), as expected. The Armbian OS (tested multiple times as rockpi4a-emmc, rockpi4a+, rockpi4a+governor, and rockpi4a+armbian) all perform terribly. Thoughts?

Hello to everybody ! I'm new to this forum and to linux. After installing my Helios64 recently, I had a few problems and had to go with the eMMC maskrom installation which were fine. PS : I've installed on top of the linux kernel (4.4) Open Media Vault (latest version). After installing everything, I've noticed that the fans were not functioning. I've checked the documentation on kobol.io site and went to the /etc/fancontrol config file and set the values as it was shown on the doc. I've restarted the fancontrol service, but still nothing. I've tried to read the pwm of my fans (has fan P7 were linked to the hwmon0 : cat /sys/class/…

Hi! I'm trying to install NUT because I connected a UPS device. I'd like to get it working so that the server is shutdown safely when there is a power interruption and that I get an e-mail notifying me as soon as there is an interruption. Already after installing via sudo apt install nut nut-client nut-server I get the following warnings: Setting up nut-client (2.7.4-8) ... Job for nut-monitor.service failed because the service did not take the steps required by its unit configuration. See "systemctl status nut-monitor.service" and "journalctl -xe" for details. invoke-rc.d: initscript nut-client, action "restart" failed. ● nut-moni…

Hello, I have a Helio64 not yet configured and I would like to be able to install the latest image available on https://armbian.hosthatch.com/dl/helios64/archive/ and especially to install the latest OpenMediaVault 6 version. Do you think this is possible ? Or will OpenMediaVault 6 not be available from armbian-config? As I write this post, the latest image available for Helios64 is Armbian_21.05.9_Helios64_bullseye_current_5.10.63.img.xz I thank you for your help Flolm

Hi my Helios 64 do not boot up anymore. In serial console i can see U-boot crc problem. So what can i do? Spoiler port is : /dev/ttyUSB0 flowcontrol : none baudrate is : 1500000 parity is : none databits are : 8 stopbits are : 1 escape is : C-a local echo is : no noinit is : no noreset is : no hangup is : no nolock is : no send_cmd is : sz -vv receive_cmd is : rz -vv -E imap is : omap is : emap is : crcrlf,delbs, logfile is : none initstring : none exit_after is : not set exit is : no Type [C-a] [C-h] to see available commands Terminal ready T T DDR Version 1.24…

Hi guys, I have been using my Helios64 for more than a year now. I have it connected with the 1Gbps NIC. I have been reading about network bonding and getting both NICs up and running. The main purpose would be to have it running in mode "Adaptive Transmit Load Balancing" (mode 5). First I've discovered the issue with the 2.5Gbps not being able to keep a consistent (and performant) speed. So I've soldered the missing pin from the capacitor to the NIC (more on this later). I've checked the speed and now it is up to specs, getting very close to 1000Mbps (960-980Mbps). But here it comes the problem that I'm facing, if I enable both independently …