Skip to content
View in the app

A better way to browse. Learn more.
Armbian Community Forums

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Rockchip

Quick links to search tags:

Banana Pi M7, BIGTREETECH CB2, Khadas EDGE2, Libre Renegade, NanoPC T6 LTS, NanoPi M5, NanoPi M6, NanoPi R3S LTS, NanoPi R4S, NanoPi R6S, NanoPi R6C, NanoPi R76S, Odroid M1, Orange Pi 4 LTS, Orange Pi 5, Orange Pi 5 Plus, Pinebook Pro, ROCK 5A, ROCK 5B, ROCK 5C, ROCK 5 ITX, ROCK PI E, ROCK PI S, ROCK S0, Zero 3W/3E, RockPRO64, Tinkerboard

  1. opi 4 lts wifi?

    Orange Pi 4 LTS · Started by cristobalgh,

    anyone has it working???

    t9097

  2. How to reset the armbian system and restore the initial configuration operation？？

    Khadas EDGE2 · Started by lay,

    How to reset the armbian system and restore the initial configuration operation

    lay

  3. Impossible first boot opi5 4GB v1.2

    Orange Pi 5 · Started by DimonKyiv,

    Tried 5 diferrent microSD cards, 3 card readers, multiple redownloads on Mac and Windows. Diferrent power supplies, including 100W charger and 52pi EP-0136 direct 5v supply. No green LED, no LAN communication, no HDMI output. Everything i get is in log (via UART) Please help... i've got no more ideas. DDR Version V1.08 20220617 LPDDR4X, 2112MHz channel[0] BW=16 Col=10 Bk=8 CS0 Row=16 CS=1 Die BW=16 Size=1024MB channel[1] BW=16 Col=10 Bk=8 CS0 Row=16 CS=1 Die BW=16 Size=1024MB channel[2] BW=16 Col=10 Bk=8 CS0 Row=16 CS=1 Die BW=16 Size=1024MB channel[3] BW=16 Col=10 Bk=8 CS0 Row=16 CS=1 Die BW=16 Size=1024MB Manufacturer ID:0x1 Samsung CH0 RX Vref:32.7%, TX Vref:1…

    DimonKyiv

  4. armbian nanopi m4v2 rk3399 mali t864 not working

    NanoPi R4S · Started by Giuseppe93,

    Hello Armbian community, I am writing this topic because, despite the drivers for the processor's integrated GPU are installed within the operating system, they do not seem to work properly. Precisely the system seems to work but as soon as I try to play a video it is played by the CPU and not by the GPU with lag and the CPU is at 100%. I leave the link and the attachment of the result of the armbianmonitor -U command that I posted here: https://paste.debian.net/1337993/ it is a compressed tar.gz file since I included all the results of the command Analysis.txt

    Giuseppe93

  5. Whats the right kernel / OS for me ?

    Orange Pi 5 Plus · Started by H_Berger,

    Hello all, I'm also bought an orange pi 5 pro :-) I have red a little bit in the Forum (after i'm bought) and I'm a little bit confused now 🙂 I'm new in the embedded (arm) world but have some knowledge from the desktop/x86 windows & linux world. my first expirience with the device was also .... intresting. I'm installed the official (orangepi.org) debian-booksworm image with the 6.1.xx kernel .... and diddnt get the network interfaces to run, and no nvme device available ... next try was with debian-booksworm image and the 5.10..xx kernel and the networks just runned and the nvme showed up. But i think for my need this kernel is…

    • 0

      Reputation Points

    • 5 replies
    • 6.9k views
    H_Berger

  6. How to check the temperature of Rock Pi S CPU?

    Radxa Rock Pi S · Started by NaK,

    Per Radxa here, it is possible to obtain CPU temperature via "sudo cat /sys/class/thermal/thermal_zone0/temp". But the following paths do not exist on Armbian 23.05.1 Bookworm with Linux 6.1.30-rockchip64: /etc/armbianmonitor/datasources/soctemp /sys/devices/virtual/thermal/thermal_zone0/temp Running armbianmonitor -M, also does not show the temp: Time CPU load %cpu %sys %usr %nice %io %irq C.St. 22:29:52 408 MHz 0.02 0% 0% 0% 0% 0% 0% 0/6

    • 0

      Reputation Points

    • 5 replies
    • 8.3k views
    kolsi

  7. I compiled Tor browser from source code

    Orange Pi 5 · Started by snow,

    I could not find any arm64/aarch64 MODERN, up to date, Tor browser binaries. Anything below current-stable would be considered insecure, and at a glance I couldn't find them anywhere. So I was able to compile Nightly for the latest updates as well It took 331 minutes, and failed 4 times along the way with 8GB RAM native on the device and 4GB ZFS to start. It did a SIGKILL9 on firefox-glean. Increased to 8gb, still failed until I increased ZFS to 16gb, and then even at a whopping 16gb it crashed next on GkRust for OOM/SIGKILL9 as well until increased ZFS to 32GB! 331 minutes later, it was succesful Just wondering, to save myself from future pun…

    snow

  8. Armbian Kernels with Functional I2C-2 Module

    Orange Pi 5 Plus · Started by Robert Pace,

    I have built quite a few Debian12 Desktop images from github.com/armbian/build for a Debian Bookworm/XFCE/Vendor Kernel environment and noticed that recent vendor kernels do not have I2C-2.M0 as a kernel module listed within armbian-config. It appears that only two kernel modules are to be found, one being Panthos, the other involving a change in frequence of some item. This image does include I2C-2.mo: Armbian-unofficial_25.02.0-trunk_Orangepi5-plus_bookworm_vendor_6.1.84_xfce_desktop.img which includes kernel: Linux Atlas 6.1.99-vendor-rk35xx #1 SMP Fri Feb 21 18:11:03 UTC 2025 aarch64 GNU/Linux But these images do not contain the I2C-2…

    • 0

      Reputation Points

    • 5 replies
    • 4k views
    Robert Pace

  9. ubuntu22 Chrome://gpu The display report is soft processed!!!!

    Khadas EDGE2 · Started by lay,

    ubuntu22 Chrome://gpu The display report is soft processed!!!! How to configure it as hard processing？？？ help thank you.

    • 0

      Reputation Points

    • 4 replies
    • 2.3k views
    Igor

  10. orangepi5 - doesn't want to boot withoud SD card

    Orange Pi 5 · Started by 1,

    root@orangepi5:~# lsblk NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINTS sda 8:0 0 223.6G 0 disk ├─sda1 8:1 0 256M 0 part /boot └─sda2 8:2 0 221.1G 0 part /var/log.hdd / mtdblock0 31:0 0 16M 0 disk mmcblk1 179:0 0 29.8G 0 disk ├─mmcblk1p1 179:1 0 256M 0 part └─mmcblk1p2 179:2 0 29.2G 0 part zram0 254:0 0 7.7G 0 disk [SWAP] zram1 254:1 0 50M 0 disk /var/log root@orangepi5:~# cat /boot/armbianEnv.txt verbosity=1 bootlogo=false overlay_prefix=rockchip-rk3588 overlays=orangepi-5-sata fdtfile=rockchip/rk3588s-orangepi-5.dtb r…

    • 0

      Reputation Points

    • 4 replies
    • 2.4k views
    Werner

  11. Sound works but only with certain versions

    Radxa Rock 5 ITX · Started by Reluctant Linux User,

    Armbian_25.2.2_Rock-5-itx_noble_vendor_6.1.99_gnome_desktop.img.xz I first tried this, as it was the first version offered at the top of the page. No matter what I tried, sound would *not* work. Not speakers, not HDMI, nada, zip. I then started trying earlier versions further down the page. Armbian_25.2.2_Rock-5-itx_bookworm_vendor_6.1.99_cinnamon-backported-mesa_desktop.img.xz And this one, sound *did* work, at least through the speaker jack anyway, but I suspect HDMI would too. I'm really suspecting something kernel related is going here (that "Rockchip BSP" note right above it makes me suspect that). In any case, I'd like…

    • 0

      Reputation Points

    • 4 replies
    • 2.8k views
    Reluctant Linux User

  12. Orange Pi 4 LTS wont boot from sd card.

    Orange Pi 4 LTS · Started by acupofchicory,

    i have 2 sd cards, 32 and 16gb. on every of them i burned ubuntu xfce and debian cli using dd and armbian imager (8 total tries). none worked. board every time booted into Android which locates on 16gb internal eMMC. what should i do? i looked into manual but no luck. i dont have DC to power board while doing maskrom. maybe i can wipe emmc from itself ( boot into android 12 and destroy it)? or i noticed that when i connect board via usb type c to my mac, it still powers on, so maybe i dont even need dc power to get maskrom device? im geniue lost now, i was searching in web for solution past 3 hours

    • 0

      Reputation Points

    • 4 replies
    • 987 views
    acupofchicory

  13. Need SPIDEV (/dev/spi*) enables on Renegade 4GB / Jammy

    Libre Renegade · Started by Patrick Pesch,

    Looking for information on enabling 4 wire SPI on the Libre Renegade. I think have it enabled (spi-spidev) in armbian-config and I think configured correctly in /boot/armbianEnv.txt: param_spidev_spi_bus=0 param_spidev_spi_cs=0 param_spidev_max_freq=1000000 Connecting to pins GPIO pin# 19/21/23/24 I still do not see ANY devices matching /dev/spi* - An guidance as to WHY? I have the build framework, but am new to building armbian kernels but could navigate it with some direction. TIA folks! [Trying to connect a 240x320 LCD display using the ST7789-VW controller, not using Arduino IDE]

    TonyMac32

  14. GPIO Uart on Tinkerboard

    Tinkerboard · Started by Tyler Vaught,

    Are the are UART Gpio pins enabled by default? If not, how do I enable them? Sorry but I'm a linux noob.

    Yuvaram Singh

  15. Unbootable images? Only old image I am using seems to work

    Radxa Rock Pi S · Started by 0xFF,

    Good morning, I cannot seem to get the the newest image (22.08 Bullseye) to boot. I've noticed the disk arrangement is significantly different than the known working image I am using. Here is what I see on the known working image... #fdisk -l Disk /dev/mmcblk0: 28.9 GiB, 30985420800 bytes, 60518400 sectors Units: sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disklabel type: gpt Disk identifier: 2A33F1A5-75EA-4125-AC19-16C0435D774A Device Start End Sectors Size Type /dev/mmcblk0p1 64 8063 8000 3.9M Linux filesystem /dev/mmcblk0…

    sbourouis

  16. spontaneously boot at initramfs

    Orange Pi 5 · Started by vanbinsbergen,

    I couldn't ping the pi anymore so i hook it up to HDMI. There i see the initramfs prompt What's up with that guys?? When i type df i only see /dev /run Broken m.2 sata?

    • 0

      Reputation Points

    • 4 replies
    • 7k views
    royk

  17. Problem connection rk3399 to 3.5TFT ili9341

    Orange Pi 4 LTS · Started by grecha,

    Hello! I would like to connect orangepi-4-lts to ili9341. I have new blank Armbian. $ uname -a Linux orangepi4-lts 5.15.52-rockchip64 #22.05.4 SMP PREEMPT I did overlay based on allwinner: /dts-v1/; /plugin/; / { compatible = "rockchip,rk3399"; fragment@0 { target = <&gpio1>; __overlay__ { ili9341_pins: ili9341_pins { pins = "PC7", "PD0"; function = "gpio_out", "gpio_out"; }; }; }; fragment@1 { target = <&spi1>; __overlay__ { status = "okay"; cs-gpios = <&gpio1 10 1>; ili9341: ili9341@0 { compatible = "ilitek, ili9341"; reg = <1>; pinctrl-names = "default"; …

    Spartan

  18. orange pi 5 pwm all enable

    Orange Pi 5 · Started by pshlab,

    /boot/armbianEnv.txt rebooting pwm all display working fine

    • 0

      Reputation Points

    • 4 replies
    • 9.1k views
    Dara Ó hEidhin

  19. How to clone SSD (nvme) to SD Card

    Orange Pi 5 · Started by Tony3,

    I thought it would be easy, but I am now turning in circles, so I am asking here. I have a working system booting on NVME (when no SD card inserted), with two partitions nvme0p1 (256Mb) and nvmeop2 (40Gb) I would like to clone my working system on a SD card. How shall I proceed? I am not asking details instruction, only the rough path I should follow (e.g. dd partitions, tune2fs ......). PS: I thought it would be easy, but whatever I do, the system keep taking /boot on the nvmeop1, so I really struggle to boot on the /boot of the SD card

    • 0

      Reputation Points

    • 4 replies
    • 5.7k views
    Tony3

  20. how to use gpio library provided by asus t=without using sudo keyword

    Tinkerboard · Started by Yuvaram Singh,

    hi , i am using the gpio library provided by asus tinker board to work with gpio on armbian os . i am having issue with running the python script without giving sudo cmd. is there any alternative to overcome giving sudo all the time while running gpio python script or any other alternate library to use with armbian python add_event_callback.py can't open /dev/mem and /dev/gpiomem wiringPiSetup: Unable to open /dev/mem and /dev/gpiomem: No such file or directory Segmentation fault

    • 0

      Reputation Points

    • 4 replies
    • 4.8k views
    Yuvaram Singh

  21. USB downs on plugging devices / Hotplug and "cold" plug

    Tinkerboard · Started by ThoLag,

    Hi! I've got a problem getting USB devices to work with Armbian 22.02.1 (Tinkerboard_bullseye_current_5.15.25) - fresh install, bare image without any modifications. While a simple usb keyboard would more or less work, plugging some devices seems to crash the built-in USB hub. This happens in "cold"-plug as in "hot"-plug, whereas there are slight differences. Booting up without any USB device attached: lsusb Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 002: ID 05e3:0608 Genesys Logic, Inc. Hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 002: ID 0bda:49f6 R…

    jock

  22. RockPi S f2fs install issue

    Radxa Rock Pi S · Started by Péter Stósz,

    Hello! Stock image from armbian.com; Armbian_25.8.1_Rockpi-s_trixie_current_6.12.41_minimal.img Here is the armbianmonitor's output: https://paste.armbian.com/ikodekuzel The error might be caused by the absence of the f2fs package in the image. root@rockpi-s:~# armbian-install Select filesystem type for eMMC /dev/mmcblk0 2 f2fs <OK> Formating /dev/mmcblk0 to f2fs ... please wait. Error: Filesystem tools for f2fs not installed, exiting root@rockpi-s:~# find / -type f -name f2fs* root@rockpi-s:~#

    0jay

  23. Waydroid for rk3588 with armbian edge (Panthor, kernel 6.8)

    Orange Pi 5 Plus · Started by Willzen,

    Updated: The Armbian vendor kernel version now includes Panthor, and will soon be able to run it as well. Waydroid images: https://github.com/WillzenZou/armbian_fork_build/releases/download/willzen-armbian-24.5.0/2.waydroid-panthorv10-240416-v1.img.tar.gz Note: Waydroid needs to be run in the Wayland desktop environment. (Such as Gnome wayland, KDE wayland session) What's work: OpenGL ES is ok, I have tested some game: Mincecrat, gameSHINE, Monument Valley 2 What's not work: Vulkan. Video hardware decode and encode. How to use Waydroid 1. To install Waydroid,…

    DarkevilPT

  24. How to enter maskrom boot for emmc flashing, from software instead of using button?

    Radxa Rock S0 · Started by grixm,

    Hi. I have Rock Pi S0 boards that I install in an enclosure. It works, but it is conceivable that some critical bug or change with the image is discovered in the future so that customers later need to flash a new image to the emmc. But for them to do this, they would have to open the enclosure and locate the maskrom button, very inconvenient. Is there a way to trigger rebooting into maskrom from software instead of pushing the button? Apparently this is possible on the official radxa OS image by running command "reboot loader" instead of just "reboot", but not on armbian it seems. After investigating I see linux patches made by the rockchip team for kernel modu…

    grixm

  25. apt install v4l2loopback-dkms fails

    Libre Renegade · Started by bp0,

    v4l2loopback-dkms 0.12.7-2 fails to build make.log: DKMS make.log for v4l2loopback-0.12.7 for kernel 6.12.32-current-rockchip64 (aarch64) Sat Jul 5 09:16:17 PM CDT 2025 Building v4l2-loopback driver... make -C /lib/modules/6.12.32-current-rockchip64/build M=/var/lib/dkms/v4l2loopback/0.12.7/build modules make[1]: Entering directory '/usr/src/linux-headers-6.12.32-current-rockchip64' CC [M] /var/lib/dkms/v4l2loopback/0.12.7/build/v4l2loopback.o /var/lib/dkms/v4l2loopback/0.12.7/build/v4l2loopback.c: In function ‘vidioc_querycap’: /var/lib/dkms/v4l2loopback/0.12.7/build/v4l2loopback.c:717:9: error: implicit declaration of function ‘strlcpy’; did you mean ‘strncp…

    laibsch

  26. Fix for: USB-C Display Port on Khadas Edge2 (Rockchip RK3588S2)

    Khadas EDGE2 · Started by graphicore,

    Hello, I'm the owner of a Khadas Edge2, and I'm trying to run it with a USB-C DisplayPort (plus touch, plus Power) screen. That combination has historically failed for me, especially with newer kernel versions. There's an old thread in the Khadas user forum https://forum.khadas.com/t/usb-c-dp-stopped-working-after-apt-update/21788 describing the problem, but it went stale and unfixed. I'm not a kernel developer, so I can't fix something like that myself. However, I recently ran an investigation with an agent that, although lengthy, appears to have produced a good fix. It's all in here, the documentation and the result: https://codeberg.org/graphic…

    Efe Çetin

  27. armbian-install to NVME (Samsung 960 Pro) not working

    Orange Pi 5 · Started by Peter Hauck,

    For a fresh install of the latest desktop version for OrangePi5 I cannot get the system to run from NVME which is a Samsung 960 Pro. It gets stuck on the spinner at boot for the first-time boot after NVME using SD - NVME in armbian-installer. Any suggestions...

    • 0

      Reputation Points

    • 4 replies
    • 2.3k views
    royk

  28. Upgrade to Armbian 5.41, 4.14.23 kernel, howto?

    Tinkerboard · Started by Choryu Park,

    linux-xenial-root-next-tinkerboard 5.38 with 4.14.14 kernel installed. armbian's apt repository has only 5.38. but packaged rom file from dl.armbian.com is 5.41 with 4.14.23. (Armbian_5.41_Tinkerboard_Ubuntu_xenial_next_4.14.23_desktop.7z) How to upgrade on linux latest armbian? It need waiting?

    • 0

      Reputation Points

    • 4 replies
    • 5.1k views
    Thewonderer

  29. Tinker Board mainline Wifi Stability

    Tinkerboard · Started by TonyMac32,

    Please post complaints, as of my latest build I'm getting the link drops as well.

    • 1

      Reputation Points

    • 4 replies
    • 4.8k views
    TonyMac32

  30. Install Armbian without destroying 3rd partition

    Orange Pi 5 Plus · Started by Jose Francisco,

    Hello everybody. I own a Orange Pi 5 Plus with Debian and 3 partitions: boot, root and storage (fat, ext4, ext4). Now I want to try Armbian but I don't want to overwrite the storage partition, so I shoudn't use dd to write the .img file. Ant tip to solve this situation? Thanks.

    Jose Francisco

  31. WiFi adapter/DKMS on 6.10.6-current-rockchip-rk3588

    Orange Pi 5 · Started by mitu,

    I have installed the recently released `Desktop images with Armbian Linux v6.10` image (24.8.1, Debian Bookworm, with the Cinnamon desktop) on an OrangePi5 and I'm happy the HDMI support included has finaly enabled the video to my 1080p display. However, my previously supported WiFi adapter is not recognized in this version - it worked with the vendor (5.10) kernel which I used with last year's OrangePi5 image, but how it seems the driver is not installed with 6.10. The WiFi adapter is connected via USB and it's listed as Realtek Semiconductor Corp. RTL8812AU 802.11a/b/g/n/ac 2T2R DB WLAN Adapter. Now, there are a few DKMS/out-of-tree drivers that I could inst…

    mitu

  32. Orange Pi 5 Plus - No Sound

    Orange Pi 5 Plus · Started by octal8,

    Installed: Armbian_23.11.1_Orangepi5-plus_bookworm_edge_6.7.0-rc1 The analog device is visible, but there's no sound from the headphone jack. The hdmi device is not visible. aplay -l **** List of PLAYBACK Hardware Devices **** card 0: Analog [Analog], device 0: fe470000.i2s-es8328-hifi-analog es8328-hifi-analog-0 [fe470000.i2s-es8328-hifi-analog es8328-hifi-analog-0] Subdevices: 1/1 Subdevice #0: subdevice #0 There is no sound when I play a test file: aplay -D hw:0,0 /usr/share/sounds/alsa/Noise.wav Playing WAVE '/usr/share/sounds/alsa/Noise.wav' : Signed 16 bit Little Endian, Rate 48000 Hz, Mono apl…

    Werner

  33. Displayport via USB-C dock

    Pinebook Pro · Started by storz,

    does displayport over usb-c dock work for you? It doesn't for me neither on 5.15 nor on 6.1.

    Werner

  34. No wifi and bluetooth on fresh install Debian 13 trixie Minimal (CLI) — current 6.18.44

    Orange Pi 4 LTS · Started by slmq,

    Hello comunity/maintainers, Please could anyone help me? After fesh install Debian 13 trixie Minimal (CLI) — current 6.18.44 there is no wlan0 nor hci0, only theese events in dmesg: [ 4.389072] Btrfs loaded, zoned=yes, fsverity=yes [ 4.987196] systemd[1]: systemd 257.13-1~deb13u1 running in system mode (+PAM +AUDIT +SELINUX +APPARMOR +IMA +IPE +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBCRYPTSETUP_PLUGINS +LIBFDISK +PCRE2 +PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD +BPF_FRAMEWORK +BTF -XKBCOMMON -UTMP +SYSVINIT +LIBARCHIVE) [ 5.729379] sysfs: cannot cre…

    • 0

      Reputation Points

    • 4 replies
    • 1.1k views
    slmq

  35. USB-TTL converter for RK3399 @ 1500000 bps

    Libre Renegade · Started by drice,

    Can anyone provide a link to a currently available and confirmed working USB to 3.3V TTL converter that works at 1500000 bps? The PL2303 I have technically supports up to 3 Mbps but only in certain discrete steps, and 1500000 is not one of those steps. The MCP2221A only supports up to 460800 bps. The FTDI FT232 data sheet claims support up to 3 Mbps but is unclear about whether arbitrary baud rates are supported, or only discrete steps like the PL2303. Searching for a compatible USB-TTL cable to work with the RK3399 has been futile so far. A link to a confirmed working cable would be much appreciated. Confirmed working cables only. No theoretical devices, please.

    dpoon

  36. Tinkerboard GPIO no output possible

    Tinkerboard · Started by g2t,

    Hi, I have installed "Armbian_22.08.7_Tinkerboard_bullseye_current_5.15.74_minimal.img.xz" on a Tinkerboard (no S, with RK3288). I have tried to set the output of some header pins without success. I used both "sysfs" and "gpiod" (which uses char-devices). Test procedure, e.g. for pin 36 (gpio223): # echo "223" > /sys/class/gpio/export # cat /sys/class/gpio/gpio223/direction in # cat /sys/class/gpio/gpio223/value 0 # echo "out" > /sys/class/gpio/gpio223/direction # cat /sys/class/gpio/gpio223/direction out # echo "1" > /sys/class/gpio/gpio223/value # cat /sys/class/gpio/gpio223/value 0 # echo "0" > /sys/class/gpio/gpio223/value # ca…

    usual user

  37. How can I install the ntsync kernel module?

    Orange Pi 5 · Started by KhanhDTP,

    As the title says, how can I install the ntsync kernel module for use with Wine/Proton?

    • 1

      Reputation Points

    • 4 replies
    • 4.1k views
    The Tall Man

  38. Libre 3328 heatsink required?

    Libre Renegade · Started by jmandawg,

    Hi all. Is heatsink required for the libre 3328? When I log in to armbiam temp says 60 but it is in red text.

    • 0

      Reputation Points

    • 4 replies
    • 4.5k views
    Johnny

  39. Why aren't the A76 cores running at 2.4 GHz???

    Orange Pi 5 · Started by lurk101,

    pi@opi5:~/AoC-2023-cplusplus$ lscpu --all --extended CPU SOCKET CORE L1d:L1i:L2:L3 ONLINE MAXMHZ MINMHZ MHZ 0 0 0 0:0:0:0 yes 1800.0000 408.0000 1800.0000 1 0 1 1:1:1:0 yes 1800.0000 408.0000 1800.0000 2 0 2 2:2:2:0 yes 1800.0000 408.0000 1800.0000 3 0 3 3:3:3:0 yes 1800.0000 408.0000 1800.0000 4 0 0 4:4:4:0 yes 2256.0000 408.0000 2256.0000 5 0 1 5:5:5:0 yes 2256.0000 408.0000 2256.0000 6 1 2 6:6:6:0 yes 2304.0000 408.0000 2304.0000 7 1 3 7:7:7:0 yes 2304.0000 408.0000 2304.0000 Why the odd cortex a76 MAXMHZ …

    • 0

      Reputation Points

    • 4 replies
    • 2.4k views
    lurk101

  40. OrangePI 5 self-reboots running GeekBench 5

    Orange Pi 5 · Started by XFer012,

    Hello, I am running Armbian 23.05 "minimal" (with the provided kernel 5.10.110) on my OrangePI 5 4GB. Upgraded all packets to latest. When trying to run GeekBench 5.5.1 ARM Preview, it reboots when approaching the end of multicore tests, with "performance" governor and default speed range (0.4 - 2.4 GHz for A76). Same goes if I drop the max clock speed to 2.2 for A76. After dropping to 2.0 GHz max, it runs fine; but this hurts performances quite a bit. I tried various power sources, including a bench PSU which can reliably supply up to 30A (but I only see a few spikes over 2A). The board has a large heatsink installed wit…

    • 0

      Reputation Points

    • 4 replies
    • 2.6k views
    XFer012

  41. 2x WIFI causing DNS problem on Tinkerboard Default settings

    Tinkerboard · Started by zer02,

    Hello, I am using the latest Desktop Armbian and use the internal wifi and a usb wifi stick (edimax ew 7811-un). Both devices are detected by network-manager. I use network-manager to connect to my router. I get internet. Minutes later, there is DNS conflict (/var/log/syslog) and I cannot resolve any websites anymore. I only see dhclient DHCPDISCOVER on eth0 255.255.255.255 for some reasons. I have this problem with a fresh installed Armbian. How can I solve this? Thank you

    • 0

      Reputation Points

    • 4 replies
    • 4.6k views
    tkaiser

  42. Orange pi 5 onboard mic

    Orange Pi 5 · Started by Netnax,

    Is it possible to use the onboard microphone of Orange Pi 5 on Armbian? It does not seem to turn on

    BOFFBOY

  43. File names for a newbie

    Orange Pi 5 Plus · Started by ricardo_brz,

    Can you help me with the contents of the file name? I understand edge, vendor, but then there are other suffixes that are not clear to me: are gnome-oibaf_desktop the same "kernel release" as the xfce_desktop or minimal? Or there are patches that are applied only to a specific version? Thanks!

    • 0

      Reputation Points

    • 4 replies
    • 2.3k views
    ricardo_brz

  44. Rock Pi S no CLK signal on SPI1

    Radxa Rock Pi S · Started by Martin Petrašovský,

    I am experiencing an issue with my Rock Pi S. When using SPI1, I am not observing any CLK output signal on pin GPIO3_B3, which I have verified with an oscilloscope. Other signals such as MOSI, MISO, and CS are functioning correctly. I have found that this issue does not occur in the older kernel 4.4.143-65-rockchip-g58431d38f8f3. However, when using the latest Armbian 25.2.2 Bookworm Minimal / IOT image, this problem arises. Could someone please assist me in resolving this problem?

    solaris3308

  45. Baudrate supported by RK3399

    Pine RockPro64 · Started by Rahul,

    Hi, I am using rockpro64 "https://www.pine64.org/?product=rockpro64-4gb-single-board-computer" that uses Rockchip RK3399 Hexa-Core (dual ARM Cortex A72 and quad ARM Cortex A53) 64-Bit Processor. My simple application is to have a UART communication. When i run serial write with 1500000 Baudrate, then it works fine. But if i lower the baudrate such as 115200, then it throws garbage value. So can i get some suggestions here? Thanks.

    • 0

      Reputation Points

    • 4 replies
    • 6.5k views
    chwe

  46. Tinker board can't be HTTP File server?

    Tinkerboard · Started by Choryu Park,

    Hi! I'm using Tinker board with armbian 5.31 stable (Ubuntu 16.04.3 LTS 4.4.73-rockchip), and using this as File Server. Cause i've install lighttpd and php7-0-fpm, and install Nextcloud (Owncloud). HTTPS is installed using Let's encrypt certification. Network is directly connected broadband, Half-Giga network. It looks working smoothly but little slow. BUT it's not. it's stuck on every file downloading. It's occurred both HTTPS and HTTP. First, HTTPS file downloading is stopped unexpectedly, cause can't download any files. HTTP is same but automatically resume, cause download is can be completed. …

    • 0

      Reputation Points

    • 4 replies
    • 4.9k views
    Choryu Park

  47. Reconnect ethernet interface after disconnection

    Tinkerboard · Started by Z11ntal33r,

    Hello! I've been using Armbian on my newly bought Tinker Board for less than two weeks now and I've to say that the work you guys have put into this is incredible! It truly is remarkable and inspires us newcomers which haven't started studying computer science or are currently studying - as myself. So, I will definitely contribute and help others in the future to increase the Armbian community! However, as I'm new to Unix, Tinker Board, everything that's not Windows or Mac OS, I've a deep learning curve ahead! Let's start with my setup: Build: ARMBIAN 5.32.170921 nightly Ubuntu 16.04.3 LTS 4.14.0-rc1-rockchip (I know it's nightly so there are bugs, ye…

    • 0

      Reputation Points

    • 4 replies
    • 3.5k views
    Z11ntal33r

  48. media acceleration

    Orange Pi 4 LTS · Started by eloon,

    Hi, does anyone know how to get hardware video acceleration on orange 4 lts? I've looked around and I saw that rk3399's multimedia support can be enabled using the rk3399 legacy multimedia framework. But that requires a legacy buster image, which doesn't exist for the orange pi. I've tried to compile it myself, but it seems the compile script won't allow it. Is it really impossible to compile a legacy kernel for orange pi 4 lts?

    • 1

      Reputation Points

    • 4 replies
    • 5.5k views
    usual user

  49. How to switch to mainline kernel in Armbian 23.11 on Orange Pi 5 ?

    Orange Pi 5 · Started by adr3nal1n27,

    Hi, The release notes for Armbian 23.11 state, under Key Improvements in This Release, "Mainline Kernel for RK3588 with experimental HDMI support." I am currently running the default 5.10.160-legacy-rk35xx kernel If I wanted to switch to and try out the mainline kernel for RK3588 with experimental HDMI support, would I do something like this: sudo apt install linux-image-collabora-rockchip-rk3588 After testing, If I want to rollback to the default legacy kernel, what are the steps involved? Apologies if there are instructions elsewhere that cover this. Thanks in advance for any guidance.

    adr3nal1n27

  50. armbian Bionic desktop 1388x768 asus tinkerboard s hdmi tv resolution

    Tinkerboard · Started by trip,

    Hello, I own a Tinker Board S (bought one or two years ago) attached to a Sony Bravia KDL 22EX320 TV by HDMI, which has a native resolution of 1388x768 pixels. Bionic desktop with kernel 5.4 (got from https://dl.armbian.com/tinkerboard/Bionic_current_desktop) didn't properly recognize the TV resolution, but set it to 1920x1024. If I run xrandr --props the resolution is not listed. I'm posting because I'm almost sure that the old TinkerOS 2.0.8 (that I installed with the board) recognized the TV resolution correctly - it anyway boots to desktop without requiring interaction, so not being able to read the text at the edges of the console …

    • 0

      Reputation Points

    • 4 replies
    • 4.2k views
    trip

  51. Orange Pi 5 no HDMI

    Orange Pi 5 · Started by Evan Heinrich,

    Hi all, this is my first post here on the forum. I'm getting ready to wrap up for the night, but I recently purchased an Orange Pi 5 (non-B) to do some tinkering with. I downloaded the Bookworm XFCE variant as I am somewhat familiar with XFCE already. Anyway, upon initial testing, I thought my power supply wasn't good enough for the board. I wasn't getting any HDMI output. When I removed the micro-SD card and tried to boot it that way, an orange pi splash screen would show on the attached display, so I think the port actually works (?) I have a spare USB to TTL Serial adapter so I was able to verify the board was successfull…

    slmq

  52. Armbian Tinkerboard Polish desktop language

    Tinkerboard · Started by PIK,

    Hi I have a problem with change desktop language from en to polish. I tryed all solutions armbian-config , dpkg-reconfigure locales, export LANG. After reboot I got english desktop and locale info http://ecocut.pl/wp-content/uploads/2019/03/locale-1.jpg

    • 0

      Reputation Points

    • 4 replies
    • 4.3k views
    Kisuke-CZE

  53. NanoPi M5 26.5.1 UFS install: btrfs root does not boot and manual partition layout is not available

    Nanopi M5 · Started by Gabriel Becker,

    Hi, I would like to report an issue I encountered while testing the new NanoPi M5 UFS boot support in Armbian 26.5.1. Board: NanoPi M5 Boot media for installation: SD card Target storage: onboard UFS BOOT switch after installation: UFS/SD Tested images: * `Armbian_26.5.1_Nanopi-m5_trixie_vendor_6.1.115_minimal.img.xz` * `Armbian_26.5.1_Nanopi-m5_trixie_current_6.18.33_minimal.img.xz` My current NVMe setup uses a custom layout: * `ext4` `/boot` * `btrfs` `/` I had to use this layout because, in my previous NVMe tests, installing the system directly to NVMe with btrfs using `armbian-install` did not boot when `/boot` was also located on btrfs. With a separate ext4 `/b…

    • 0

      Reputation Points

    • 4 replies
    • 1.5k views
    eselarm

  54. Mic recording silent file

    Orange Pi 5 · Started by Rudra Patel,

    My microphone is not working on armbian jammy gnome Device : Opi 5 16GB I tried to use command arecord -l I showed 1 sound card Named rockchip or something like it with similar name.

    rbrisita

  55. odroid m1,c2,xu4 cannot connect to wifi network via wifi dongle. corrupt beacon and probe response

    Odroid M1 · Started by dev001,

    Cannot login to wifi router. $ lsb_release -a No LSB modules are available. Distributor ID: Debian Description: Armbian 26.8.3 trixie Release: 13 Codename: trixie $ dmesg [ 18.683974] r8152 6-1:1.0 enx001e063222ad: carrier on [ 27.803475] wlxe0e1a93880f7: authenticate with xx:xx:xx:xx:xx:xx [ 29.112665] wlxe0e1a93880f7: send auth to xx:xx:xx:xx:xx:xx (try 1/3) [ 29.115405] wlxe0e1a93880f7: authenticated [ 29.126606] wlxe0e1a93880f7: associating to AP xx:xx:xx:xx:xx:xx with corrupt beacon and probe response [ 29.134087] wlxe0e1a93880f7: associate with xx:xx:xx:xx:xx:xx (try 1/3) [ 29.253998] w…

    dev001

  56. Tinkerboard rk3288 iptables CT target problem, NETFILTER_XT_TARGET_ST not set

    Tinkerboard · Started by Sergey Zinchenko,

    Hello! I set up a firewall on the Asus Tinkerboard. I came across a very strange thing - the lack of support for the CT target in iptables. In fact, it appears that iptables has support of given target, but the required kernel module is missing. After running cat /boot/config-4.4.120-rockchip | grep NETFILTER_XT_TARGET_ST I saw the following: # CONFIG_NETFILTER_XT_TARGET_CT is not set. What the reason of that decision? It blocks ability to forward sip, ftp and some other protocols precisely. And also blocks ability to use SYNPROXY target correctly. Is it planned to include this module in the build?

    • 1

      Reputation Points

    • 4 replies
    • 3.8k views
    Igor

  57. How to install on nvme

    Odroid M1 · Started by JulienD,

    Hello, Some weeks ago, I installed the kinetic version. It was rooted on the nvme drive and was working decently. After some explanations on this forum, I decided to install the LTS version. I burned a new SD card, inserted it and powered on. I was never prompt about where to install the system. After installation, the df command shows that the system is installed on the sd card. I can see nvme partitions in /dev but they aren't mounted. nvme is partitionned in two parts : one for the system, the other one is crypted and dedicated to data. How should I do? Thanks Julien

    • 0

      Reputation Points

    • 4 replies
    • 8.5k views
    VolkerW

  58. Enable G_ether USB OTG

    Orange Pi 5 Plus · Started by vysec,

    Hi there, I've been trying to enable g_ether and USB OTG on my Orange PI 5+. I've tried things like editing /boot/orangepiEnv.txt and adding module-load dwc2,g_ether. However, I don't get any usb0 interface pop up which indicates to me that the USB/OTG mode is not set to peripheral on the settings. I'm not sure how to go about it? Would anyone be able to advise? I want to use the power port for also Ethernet.

    • 0

      Reputation Points

    • 4 replies
    • 5.6k views
    Werner

  59. Nanopi M6 DHCP is not working / Ethernet Failed to reset the dma

    NanoPi M6 · Started by aproxityloq,

    This issue is about Nanopi M6 model without LCD, but there is no tag for Nanopi M6, even though it has Platinum support, so I had to set nanopi-r6c tag. The Ethernet interface can't receive settings from DHCP with errors: [ 12.894724] rk_gmac-dwmac fe1c0000.ethernet: IRQ eth_lpi not found [ 12.894866] rk_gmac-dwmac fe1c0000.ethernet: Looking up phy-supply from device tree [ 12.894876] rk_gmac-dwmac fe1c0000.ethernet: Looking up phy-supply property in node /ethernet@fe1c0000 failed [ 12.894892] rk_gmac-dwmac fe1c0000.ethernet: supply phy not found, using dummy regulator [ 12.894948] rk_gmac-dwmac fe1c0000.ethernet: clock input or output? (output). …

    • 1

      Reputation Points

    • 4 replies
    • 4k views
    aproxityloq

  60. [HELP] Stuck in U-boot after overlay.dts attempt

    Radxa Rock Pi S · Started by yuri.vivaldi,

    Hi, everyone I have 2 rockpi s based boards, and I tried to apply an overlay to one. It actually compiled, I rebooted and the nothing more. I connected serial, e it was on U-boot, spitting this: Spoiler DDR Version V2.06 20211109 CHIP ID = 0x00003308 REG2C: 0x00000034, 0x00000034 In 589MHz DDR3 Col=10 Bank=3 Row=15 Size=512MB OUT: sdram_init finish. Boot1 Release Time: Mar 24 2022 08:28:57, version: 1.36 ROM VER:0x56323030, 19 chip_id:330800,0 ChipType = 0x13, 512 DPLL = 1300 MHz ...nandc_flash_init enter... No.1 FLASH ID:ff ff ff ff ff ff DPLL = 1300 MHz sfc nor id: ff ff ff DPLL = 1300 MHz sfc_nand id: ff ff ff NeedKHz=200KHz,…

    yuri.vivaldi

  61. [SOLVED] Armbian 25.2.1 NVMe SPI flash boot issues

    Orange Pi 5 Plus · Started by Jacob Olness,

    EDIT: I tried using ext4 rather than btrfs and.. somehow that solved it? I don't understand how the SSD file system would change how the bootloader is flashed because if properly flashed, the SD card shouldn't work at all, unless something has changed. Hey all, I wanted to move to the newest version of armbian (25.2.1) and for whatever reason neither `apt update && apt upgrade` nor `armbian-upgrade` (as a sanity check) worked so I wiped the SPI flash using `mtdtools` as prescribed in the forum post linked on the support page. 1) Booted from SD, installed Armbian and the bootloader. 2) Shut down, removed SD and turned on. Machine hung and never boote…

    • 1

      Reputation Points

    • 4 replies
    • 6.4k views
    Jacob Olness

  62. Network bridge fails to initialize (VLAN in promisc mode not supported)

    Orange Pi 5 · Started by Wolverine,

    Hello, I tried to setup a network bridge on the Orange Pi 5 to utilize with Qemu/KVM and some virtual machines I have. Here is my armbianmonitor output: https://paste.armbian.com/dajivikohi I edited /etc/netplan/armbian-default.yaml and modified it to setup a simple network bridge. I've done this countless times on other hardware I have. I rebooted, but the bridge fails to initialize and the screen gets an error dumped out every 5-10 seconds: rk_gmac-dumac: fe1c0000.ethernet eth0: Adding VLAN in promisc mode not supported rk_gmac-dumac: fe1c0000.ethernet eth0: failed to initialize vlan filtering on this port Is bridg…

    • 0

      Reputation Points

    • 4 replies
    • 7k views
    Oskar Enoksson

  63. The microphone (on Android) does not work after installing Armbian?

    Orange Pi 5 Plus · Started by KAHrel,

    Hello, good afternoon. I'm using a translator, so I apologize if it's not clear. I have an Orange Pi 5 Plus SBC which I have Android installed on the m2 drive. I install Armbian on a microSD card. I don't remember what problem I was having, but I had to format the SPI Flash. After that, the Armbian version worked fine. Also, after formatting the SPI Flash, my microphone stopped working on Android (it works on Armbian). Could this be due to formatting the SPI Flash? Thank you.

    Igor

  64. Armbian does not boot, can't find partition mmc 1:1?

    Pine RockPro64 · Started by MisterC707,

    Hello! I'm trying to get Armbian jammy latest to boot on my new RockPro64. I've tried both the CLI and XFCE images, flashed with Balena to a good SanDisk uSD card. Both boot into U-Boot but then fail to find a partition on mmc 1. Checking the SD card there's only 1 Linux partition and no FAT one. I tested with a Debian image on the same SD card (DOS + Linux Partition) and it booted into the installer no problem. Any ideas? Thanks! (Also asked on Pine 64 Forums, I will update/close this if they resolve it or vice/versa.)

    • 0

      Reputation Points

    • 4 replies
    • 6.7k views
    MisterC707

  65. Build for RockPro64 works for BRANCH "dev", but fails for "default"

    Pine RockPro64 · Started by Meier,

    Noob here, please excuse if I ask something obvious and feel free to just point me into the right direction. About a week ago, I was able to successfully build Armbian for RockPro64 in the standard Vagrant build environment, creating a bootable image using the compilation GUI without any special kernel configuration. I tried again yesterday, both with the GUI and the CLI command below, but the build process always fails: $ sudo ./compile.sh BOARD=rockpro64 PROGRESS_LOG_TO_FILE=yes KERNEL_ONLY=no KERNEL_CONFIGURE=no RELEASE=stretch BUILD_DESKTOP=no BRANCH=default ... CC [M] drivers/net/wireless/rockchip_wlan/rtl8723bu/core/rtw_mp_ioctl.o CC [M]…

    • 1

      Reputation Points

    • 4 replies
    • 4k views
    Meier

  66. Emby server in Orange Pi5

    Orange Pi 5 · Started by RODO RODO,

    Hello Is it possible to install emby server in Orange Pi5? Thanks

    Gypsophila .

  67. A resonably fresh kit that supports HDMI ??

    Orange Pi 5 · Started by Gullik,

    Hi, After bleeding edge 6.8 or so, I lost HDMI output. Does anyone run the recent kernels with HDMI? Which ? The 6.1.75 kernel has HDMI, but a lacks Mt7961 wifi, and changing keyboard does not work, which probably is my lack of understanding of wayland. Gullik PS the HDMI issue might be a resolution thing, unfortunately I use an old TV ( 1920x1024)

    • 0

      Reputation Points

    • 4 replies
    • 3.5k views
    jyce

  68. Is the NanoPC-T6 Plus compatible with the NanoPC T6 LTS image ?

    NanoPC T6 LTS · Started by magic_sam,

    Dear all, I just received my new NanoPC-T6 Plus from FriendlyElec: https://www.friendlyelec.com/index.php?route=product/product&path=69&product_id=315 I couldn't find a dedicated image for this SBC, is it compatible with the one for the NanoPC T6 LTS (same board, upgraded LPDDR5 RAM) ? https://www.armbian.com/nanopct6-lts/ Best regards, Magic Sam

    • 0

      Reputation Points

    • 4 replies
    • 3.9k views
    magic_sam

  69. [Bug] System restarts on seek on h264 video files

    Orange Pi 5 · Started by rix81,

    Hello, i'm using Armbian 23.11 Jammy-amazingfated Gnome. Kernel 5.10 If to seek a couple of times in h264 1080p BD remux'es it will cause system restart. Any video players are affected. Tried mpv, vlc, kodi and others. Problem affect just h264 1080p remuxes, that typically are 30..40 Gb, smaller h264 or even larger h265 files seem to work fine. I tried fresh install of armbian, where no rkmpp is installed, then h264 files plays/seeks fine, in software mode of course. Once I did sudo update/upgrade, that also installs rkmpp and other rockchip stuff, then videos start to play with rkmpp and problem is back. I've tried disabling hw deco…

    • 0

      Reputation Points

    • 4 replies
    • 2.8k views
    noba

  70. Nanopi R4s does not bootup after power off then on

    NanoPi R4S · Started by sami,

    hello guys, i recently observed a weird behavior with my nanopi R4s(jammy os). when the power goes OFF then ON in like 5 seconds duration then the nanopi does not boot up at all! i need to remove the adapter for like 15 seconds so it would be able to boot again! is this normal?

    • 1

      Reputation Points

    • 4 replies
    • 5.2k views
    Junkman

  71. OPi 5: Plug and Play - Wifi TP-Link T3U Nano

    Orange Pi 5 · Started by toocanad,

    FYI. Searching some forums around the web, stumbled on a post that indicated the TU3 Nano would work on the OPi 5. I thought I would give it a try. It worked for me plugged it in reboot. Download speed topped out at 200mb on the usb3 (top plug) connected to 5Ghz wifi. Happy days. Running the Feb.27 stable version of Armbian_23.02.2_Orangepi5_jammy_legacy_5.10.110_gnome_desktop. TC

    toocanad

  72. Armbian-gaming box64 box86 + wine

    Orange Pi 5 · Started by jerrebxl,

    I am waiting on my opi5 but was already investigating how to run Roblox (an x86 32 bit Windows game) on it. Grapejuice + box86 + wine could do the trick and saw this interesting script: https://github.com/NicoD-SBC/armbian-gaming Will this be working for opi5 too or is it specific to rk3399 (saw that in some compiler flags)? Anybody experience or an updated installer script? Related info: This YouTube channel covers examples of running games on rk3588 (rock5b) making me believe performance could be quite good: https://youtube.com/@TheByteman

    • 0

      Reputation Points

    • 4 replies
    • 11.5k views
    NicoD

  73. AetherSx2 - OpenGL is not supported. Only OpenGL 3.0 was found

    Orange Pi 5 · Started by djdiegodj,

    I'm using the ps2 emulator and when I try to run a game I get an error message "OpenGL is not supported. Only OpenGL 3.0 was found" I'm using the version "Armbian 23.02 Jammy Gnome"

    Hqnicolas

  74. Advice wanted, after todays update OPI 5 plus does not boot from nvme anymore

    Orange Pi 5 Plus · Started by Zyxx,

    Hi @ all, long time reader, but never managed to register. Now it is time... as I'm not able to solve this myself, kindly asking for help. I'm stuck, my Orangepi 5 plus stops boot at this: Loading, please wait... Starting systemd-udevd version 252.36-1~deb12u1 Begin: Loading essential drivers ... done. Begin: Running /scripts/init-premount ... (initramfs) What happened before? Last year I bought the Orangepi 5 plus (8GB) and went ahead, testing everything out - having incredible fun with this little box. But with a way to old/slow sd card which finally failed two or three months ago. I went ahead and wrote the A…

    • 0

      Reputation Points

    • 4 replies
    • 4.5k views
    Zyxx

  75. Query re nvme addr in armbian boot.cmd

    Orange Pi 5 · Started by mcfo,

    Hi, SD card did not load Armbian_25.8.1_Orangepi5_trixie_current_6.12.41_xfce_desktop. I noticed that in boot.cmd line 9 , rootdev is defined as /dev/mmcblk0p1. Should that be /dev/mmcblk0n1 or /dev/mmcblk0n1p1? I note that this file should not be edited and the armbianEnv.txt only refers to rootdev=UUID=7e27c862-0a39-41cd-891e-7d77ff7968fd. Is this an error or am I off course? If so where do I correct it? cheers

    • 0

      Reputation Points

    • 4 replies
    • 2.2k views
    mcfo

  76. Coming from Joshua Riek's UBUNTU

    Orange Pi 5 · Started by Bas,

    Hello OPI5 users. Running Joshua Riek's Ubuntu distro, I keep getting stability issues. Perhaps because I keep using Xorg. Perhaps because hardware acceleration is buggy. In the past I used super stable Armbian OPI5 distro's without hardware acceleration. Infact I still use Armbian on another RK3588 box, I don't think it has EVER crashed, running docker, Mosquito, HomeAssistant, and a buch of other things. Now that my Orange Pi 5 gets a slightly more serious use as webserver, I really like to get rid of the unpredictable Xorg crashes, and gladly would sacrifice HW acceleration for stability. My situation is this: Using JR Ubuntu Because I …

    • 0

      Reputation Points

    • 4 replies
    • 8.8k views
    Bas

  77. I have no SD writer, can I boot from a simple USB thumbstick?

    Orange Pi 5 · Started by snow,

    Hi there, Just got Orange Pi 5 8GB and have no idea where to begin. I have a microSD card available, but no writer. I had the idea to boot from USB thumbstick and then write the SD card using the port on the Orange Pi 5, then I can boot from SD card. Is this possible? What image and method do I need to follow in order to boot from a simple 32GB USB Sandisk thumbstick? Thank you!

    berin

  78. HDMI not working above 1080P

    Pine RockPro64 · Started by wilsonh,

    It seems that the HDMI output does not have any option beyond 1080P. Tried multiple monitors. The font size at uboot stage seems right but the resolution maxed out at 1080P after kernel starts. Tried Armbian 24.2.1 with 6.6.16. Could be related with this: https://forum.manjaro.org/t/rk3399-hdmi-output-for-resolutions-different-than-1080p/90644. but patches should be applied at Kernel 6.4: https://www.phoronix.com/news/Linux-6.4-imx25-Rockchip-4K Attached is the screenshot when connected with DELL 25inch monitor. Should have 2K option. diagnoses: https://paste.armbian.com/gaketoluye Thank you

    • 0

      Reputation Points

    • 4 replies
    • 3.8k views
    DavidFajardo

  79. Rock Pi S - Audio Support

    Radxa Rock Pi S · Started by danj,

    Hi everyone! I am struggling with audio input. Output audio from LINEOUT pins works fine out-of-the-box! What about the audio input? To begin with I have tested the arecord command with these error messages… TEST 1 root@rockpi-s:~# arecord -f S16_LE -d 10 -r 16000 --device=“hw:0,0” test-mic.wav Recording WAVE ‘test-mic.wav’ : Signed 16 bit Little Endian, Rate 16000 Hz, Mono arecord: set_params:1358: Channels count non available TEST 2 root@rockpi-s:~# arecord -f S16_LE -c 2 -d 10 -r 16000 --device=“hw:0,0” test-mic.wav Recording WAVE ‘test-mic.wav’ : Signed 16 bit Little Endian, Rate 16000 Hz, S…

    • 0

      Reputation Points

    • 4 replies
    • 4.6k views
    PHLAK

  80. Thinkerboard S Diode Dylema

    Tinkerboard · Started by JMSKK,

    I have a question or at last 2. 1.Where to connect outside diode to thinkerboard . 2.How to turn off/on it from command line.

    • 0

      Reputation Points

    • 4 replies
    • 3.3k views
    JMSKK

  81. cpufrequtils not correctly loaded on boot

    Radxa Rock Pi S · Started by kolsi,

    Hello, I have Rock Pi S V13 and Armbian 23.8.1 Bookworm with Linux 6.1.50-current-rockchip64. When I change CPU settings (min frequency, max frequency, scaling governor) using armbian-config, the change works correctly as expected. However, these settings are lost on reboot. When I check the status of cpufrequtils service, it seems that it does not load correctly as it is not able to find the requested governor: But if I start it manually later, it seems to load all my settings correctly: Any ideas to fix the problem except manually reloading it later? armbianmonitor: https://paste.armbian.com/owoluf…

    • 0

      Reputation Points

    • 4 replies
    • 6k views
    kolsi

  82. armbian gpu performance

    Orange Pi 5 · Started by Dim3nt0,

    with clean install of armbian plus those 4 lines to install hardware acceleration glmark2-es2 gives score of about 800-900, about less then 25% of performance opi5 is capable. is it possible to raise that a bit, not all the way but just a bit more without instaling gnome or wayland, just to keep armbian as clean as its possible. as it is, its stable but barely(they do run) able to run 4k youtube oe 4k mkv, as soon as there is gnome and wayland it starts to crash, joshua rieks version, monka, armbian with all the drivers, any i tried it would crash eventualy.

    • 1

      Reputation Points

    • 4 replies
    • 10.7k views
    NicoD

  83. PCIe width only x1 for a x4 card

    Pine RockPro64 · Started by Nino,

    Hi I installed a nvme SSD to my rockpro64 (with a generic PCIe adapter card). Somehow it only uses a x1 link instead of x4. I also observed the same behaviour with a x2 SATA card (only x1 link established). Output of lspci: LnkSta: Speed 2.5GT/s (downgraded), Width x1 (downgraded) To rule out hardware issues, I also tried the same setup with Manjaro-ARM which correctly negotiates a x4 link. LnkSta: Speed 2.5GT/s (downgraded), Width x4 dmesg for Armbian [ 2.221206] rockchip-pcie f8000000.pcie: host bridge /pcie@f8000000 ranges: [ 2.221296] rockchip-pcie f8000000.pcie: MEM 0x00fa000000..0x00fbdfffff -> 0x00…

    • 0

      Reputation Points

    • 4 replies
    • 4.6k views
    Nino

  84. Video GPU acceleration not working correctly on Youtube and Chromium

    Orange Pi 5 · Started by gospod,

    This https://github.com/Joshua-Riek/ubuntu-rockchip/wiki/Orange-Pi-5 produces nearly 0 dropped frames at 4K 60fps on https://www.youtube.com/watch?v=LXb3EKWsInQ While latest Armbian_23.11.1_Orangepi5_jammy_legacy_5.10.160_gnome-amazingfated_desktop.img.xz and doing immediately after install, only these commands: sudo add-apt-repository ppa:liujianfeng1994/panfork-mesa sudo add-apt-repository ppa:liujianfeng1994/rockchip-multimedia sudo apt update sudo apt dist-upgrade sudo apt install mali-g610-firmware rockchip-multimedia-config exactly like it says on https://www.armbian.com/orangepi-5/ and sudo reboot produces alot of dropped frames on same youtube …

    BOFFBOY

  85. No display using MIPI DSI on Radxa 5c

    Radxa Rock 5C · Started by OlivierSC,

    Hello, I'm trying to connect a MIPI DSI display. Currently, backlight is working, but not the display in Armbian (Armbian 25.5.1 Noble Gnome). DTS is loaded and corresponding kernel module panel-simple-dsi is loaded as well. Same DTS works on the official Radxa 5c image (rock-5c_bookworm_kde_b2) (kernel 6.1.43-15) Has anyone faced a similar issue? armbianmonitor -u : https://paste.armbian.com/ocoperohak.yaml Thanks!

    royk

  86. RK3588 (Radxa Rock 5C) overheating issues

    Radxa Rock 5C · Started by ileri,

    I have a RK3588 (Radxa Rock 5C) system running Armbian Debian Trixie. I have the heatsink and the fan installed as well. I set the fan PWM to 255 as soon as temperature reaches 50 degrees via a systemd service. When using all 8 cores, the system overheats (>110 degrees) and eventually shuts down. For example, when compiling ffmpeg, it works fine with 'make -j6', but 'make -j8' results in a shutdown before compilation is complete. Likewise I had thermal issues when using llama.cpp. Shouldn't the OS throttle the CPU when temperature reaches high levels? I think that is not happening at the moment. Online search referred me to cpufrequtils to …

    ileri

  87. Bluetooth not working with Armbian Noble 24.04 (2025-03-07)

    Radxa Zero 3W/3E · Started by alansrobotlab,

    I'm unable to activate bluetooth in the armbian build above. Confirmed bluetooth working in the vendor radxa bookworm xfce build. Here's what I see in dmesg that may be relevant: ... [ 9.329177] kernel: Bluetooth: Core ver 2.22 [ 9.329247] kernel: NET: Registered PF_BLUETOOTH protocol family [ 9.329261] kernel: Bluetooth: HCI device and connection manager initialized [ 9.329281] kernel: Bluetooth: HCI socket layer initialized [ 9.329296] kernel: Bluetooth: L2CAP socket layer initialized [ 9.329337] kernel: Bluetooth: SCO socket layer initialized ... [ 11.165207] kernel: [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: u…

    yuki Orikasa

  88. Is there a wireless keyboard which works with the Orange Pi 5?

    Orange Pi 5 · Started by Peter Gamma 02,

    I don t know for sure a wireless keyboard which works with the Orange Pi 5. Crosstalk Solutions says on his YouTube channel that the Rii (Upgrade) i4 Mini Bluetooth Keyboard with Touchpad, Blacklit Portable Wireless Keyboard with 2.4G USB dongle for Smartphones, PC, Table works with the Orange Pi 5: https://kit.co/crosstalk/orange-pi-5 But Crosstalk Solutions does not show a proof of function in his video, and I don t know anybody else who confirms a wireless keyboard who is working with the Orange Pi 5. Do you know a wireless keyboard?

    compent
  89. Guest

    I want to install Armbian on Nvme SSD

    Orange Pi 5 · Started by Guest,

    I want to install Armbian on Nvme SSD. How do I install on SSD?

    • 0

      Reputation Points

    • 4 replies
    • 4.7k views
    Guest
    Guest

  90. I2C sensor on OPI5

    Orange Pi 5 · Started by OttawaHacker,

    I need to move my homeassistant from rpi4 to an opi5 but I have some I2C sensors connected. Had anyone any luck configuring python and gpio to work with I2C sensors? This was a bit rough a while ago and the kernel support seems much more limited compared to the rpi4 for this type of use case. Any experience?

    martivo

  91. armbian jammy 23.5 cli orangepi5 unable to reboot

    Orange Pi 5 · Started by aditnsr,

    I did a fresh install of armbian jammy 23.5 cli on my orangepi 5 (I previously used 22.11 and 23.02), and I cannot reboot. "sudo reboot" just hangs the system. Not really a big deal, just somewhat annoying, because previous versions runs fine. Anybody else experiencing the same problem? "armbianmonitor -U" output is attached. armbianu.txt

    conky

  92. How to enable OV13855 camera on OPi5?

    Orange Pi 5 · Started by Sargador,

    Hello. Is it possible to enable OV13855 camera on OPi5 with the latest armbian image? If yes, how do it? Thanks!

    • 0

      Reputation Points

    • 4 replies
    • 7.9k views
    Roman Aliev

  93. initramfs-tools issue "unsupported architecture" unable to write to uboot

    Pinebook Pro · Started by pinebookpro-owner,

    Hello, unfortunatelly I post again, because of the latest problem with broken install of initramfs .... The system is unable to write it to uboot and gives the error about unsupported architecure. Every standard commands are probed, without result. it comes always the same error.

    technik007_cz

  94. Using a Samsung SSD 980 PRO 2TB NVME

    Odroid M1 · Started by usual user,

    While exploring my Info Center, I stumbled across this screen: If there are other users who use a Samsung SSD 980 PRO 2TB, they may also be interested in following this link: https://www.pugetsystems.com/support/guides/critical-samsung-ssd-firmware-update/

    • 0

      Reputation Points

    • 4 replies
    • 3.3k views
    usual user

  95. RGMII Settings in DTB files for Odroid-M1

    Odroid M1 · Started by fly_kt,

    Hello, I've installed armbian with Debian Trixie on my Odroid-M1 to replace the Ubuntu installed via petitboot. Everything was running smoothly except the networking part which was very slow (with luck some 100kbit/s) and has shown very high packetloss, even while the switch and ethtool report absolutely no problems and replacing cables and switching ports didn't help. Switching to 100Mbit/s was working fine, no loss anymore, switching back to 1G caused massive packet loss. With some help from chatgpt and another M1 I own that was still running the hardkernel/petitboot installed kernel and dtb I could trace the issue down the RGMII timing…

    fly_kt

  96. RTL8723BS in AP mode gets kernel errors

    Tinkerboard · Started by Ravaz,

    Hello, I'm unable to make the RTL8723BS chip on my Tinker Board to work on AP mode with the 5.4 kernel (same configuration works on legacy kernel). When I try to connect I get this error on dmesg: RTL8723BS: ap recv deauth reason code(3) sta:40:4e:36:cf:8a:18 On the console I also get a bunch of kernel errors similar to this: Message from syslogd@localhost at Dec 27 14:26:11 ... kernel:[ 799.239910] ff60: bf0377a4 dd8057e8 dd07ffac dd07ff78 c014a17c bf0377b0 de2d9128 de2d9128 Is this a known problem? Thanks

    Ravaz

  97. Rock 5C (Lite) - Wifi is not working or driver not found

    Radxa Rock 5C · Started by PHYO ZIN KHANT,

    New Rock 5C work everything fine on Armbian 24 - bookworm stable release but only issue is that Wifi is not working on all stable release except Daily / Rolling releases. It seemed like something is misconfigure about wifi driver. You can see that I tested on both kernel 6.1.43 (stable) and latest edge and it's not working. But this daily release work like charm.

    ajvuik

  98. radxa zero 3W & 3E chromium and firefox fail

    Radxa Zero 3W/3E · Started by theskid,

    hi After recent sudo apt update && sudo apt upgrade via armbian debian bookwork XFCE chromium and firefox breaks its not updates for chromium or firefox as happens when i hold those packages from upgrading too also on fresh sdcard flash/install without full upgrade(just upgrading chromium and its dependencies via depository) chromium still works fine, its something else in the depository that breaks it

    Werner

  99. Tinker: effects after 'echo mem > /sys/power/state'

    Tinkerboard · Started by SteMMo,

    Hi all, I'm trying a Tinkerboard running armbian (minimal) and DietPi. My goal is to handle suspend and wake up. To enter in suspend mode i run 'echo mem > /sys/power/state'. I'm looking other ways to suspend .. by C application or by a signal on GPIO To wakes up I notes different modes on different OSes: - linaro pressing power button, pressing a key on usb+bt keyboard, pressing usb+bt mouse button - dietpi - pressing power button - armbian minimal - nothing ? my guess is that the board shuts down Please con you confirm? Where does reside this different behaviors? Thanks, regards. PS: is …

    • 0

      Reputation Points

    • 3 replies
    • 4k views
    Igor

  100. Tinkerboard S eMMC image boot

    Tinkerboard · Started by Robertspark,

    Looking for a bit of advice... Been running Armbian CLI on the tinker (nonS) via SD card no problems Got an S with eMMC... Wrote tinkerOS and it loads no problems... Wrote Armbian image.... No go / boot Any suggestions on how to fix.... Thanks... There is a bit here which is what it used to re-write TinkerOS to the eMMC https://tinkerboarding.co.uk/wiki/index.php?title=Setup Really like the Armbian CLI versions as lightweight and without bloat.

    Robertspark

Account

Navigation

Search

Search

Configure browser push notifications
Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.