Amlogic meson
Quick links to search tags:
Banana Pi CM4-IO, Banana Pi M2S, Banana Pi BPI-M2 Pro, Banana Pi M5, JetHub D1, JetHub H1, Khadas VIM1, Khadas VIM1S, Khadas VIM2, Khadas VIM3, Khadas VIM3L, Khadas VIM4, La Frite, Le Potato, Sweet Potato, Odroid C1, Odroid C2, Odroid C4, Odroid HC4, Odroid N2/N2+, Radxa Zero
-
The images where applied with Balena etcher. Petitboot was removed as described. The PSU was included in the bundle (15V 4A). Odroid Ubuntu works fine. The boot process stops at: Booting kernel ... I tried the following Images (none of them works): Armbian Buster - mainline kernel 5.10.y Armbian Focal - mainline kernel 5.10.y What am i missing ? Any help appreciated.
-
1 2 ### Activated 1 lzo-rle zram swap devices with 1816 MB each 3 4 ### Activated Armbian ramlog partition with zstd compression 5 6 ### Activated 1 lzo-rle zram swap devices with 1816 MB each 7 8 ### Activated Armbian ramlog partition with zstd compression 9 10 Sun 28 Mar 2021 04:42:10 PM CEST | Odroid N2 | 21.02.3 | arm64 | aarch64 | 5.10.21-meson64 11 12 ### dmesg: 13 14 [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034] 15 [ 0.000000] Linux version 5.10.21-meson64 (root@hirsute) (aarch64-linux-gnu-gcc (G…
-
Reputation Points
- 2 replies
- 5.9k views
-
-
Hi! Using the vanilla ARMBIAN image 23.02.2_Bananapim5_bullseye_current_6.1.11_minimal Enabling the provided uartA and uartC dtbos fails. Here is the output from the boot process, as captured via the Serial Debug interface: 238 bytes read in 3 ms (77.1 KiB/s) Applying kernel provided DT overlay meson-uartA.dtbo failed on fdt_overlay_apply(): FDT_ERR_NOTFOUND 238 bytes read in 3 ms (77.1 KiB/s) Applying kernel provided DT overlay meson-uartC.dtbo failed on fdt_overlay_apply(): FDT_ERR_BADMAGIC It seems that this image provides invalid dtbos, likely not properly built alongside the same kernel image. I'm happy to help de…
-
Reputation Points
- 3 replies
- 5.9k views
- 1 follower
-
-
I have flashed the last 23.8 bookworm lite image to my lepotato 1GB model, and it launched with 927 MB total memory. running apt update ; apt upgrade ; reboot it drops to 862M How can I reclaim the remaining memory? This is mostly a headless server i do not need any GPU. just basic hdmi output for troubleshooting purposes. before: Welcome to Armbian 23.8.1 Bookworm with Linux 6.1.50-current-meson64 System load: 8% Up time: 4 min Memory usage: 13% of 927M IP: CPU temp: 48°C Usage of /: 4% of 29G After: Welcome to Armbian 24.2.1 Bookworm with Linux 6.6.16-current-m…
-
no WiFi Adapter after fresh installation. usbcore.autosuspend=-1 fixes it: ___ _ _ _ ____ ____ / _ \ __| |_ __ ___ (_) __| | / ___|___ \ | | | |/ _` | '__/ _ \| |/ _` | | | __) | | |_| | (_| | | | (_) | | (_| | | |___ / __/ \___/ \__,_|_| \___/|_|\__,_| \____|_____| Welcome to Armbian 24.2.1 Bookworm with Linux 6.6.16-current-meson64 System load: 46% Up time: 0 min Memory usage: 7% of 1.82G IP: 192.168.25.252 CPU temp: 28°C Usage of /: 66% of 3.0G [ Menu-driven system configuration (beta): sudo apt update && sudo apt …
-
Reputation Points
- 3 replies
- 5.8k views
-
-
So Le Potato (and Sweet potato) take about 10 seconds before reaching systemd. Is there a way to speed this up? I've tried putting boot_delay=0 as well as console=serial in armbianEnv.txt in hope of shortening the time in u-boot, but these didn't change anything. I've also tried building this image with no initramfs and no loadable module support.
-
Reputation Points
- 9 replies
- 5.8k views
- 1 follower
-
-
Hi On fresh installed Armbian_23.5.1_Odroidn2_jammy_current_6.1.30_xfce_desktop when starting chromium-browser I get odroidn2:~$ chromium-browser Gtk-Message: 20:49:33.686: Failed to load module "xapp-gtk3-module" libva error: vaGetDriverNameByIndex() failed with unknown libva error, driver_name = (null) [18372:18372:0625/204934.172288:ERROR:gpu_init.cc(537)] Passthrough is not supported, GL is egl, ANGLE is [18372:18372:0625/204934.232251:ERROR:gl_display.cc(508)] EGL Driver message (Error) eglQueryDeviceAttribEXT: eglQueryDeviceAttribEXT [18372:18372:0625/204934.232523:ERROR:gl_angle_util_vulkan.cc(189)] Failed to retrieve vkGetInstanceProcAddr [18372:18372:06…
-
Reputation Points
- 5 replies
- 5.8k views
-
-
I have been reading about webcams, etc. and Linux and am working with my LePotato running Ubuntu 22.04. I added the Arduino CSI-USB converter so I can plug in an RPiHQ cam into the USB port. I see the following in the log messages: pi@lepotato:~$ dmesg | grep Camera [ 4.431905] usb 1-1.2: Product: Arducam IMX477 HQ Camera [ 8.798501] uvcvideo: Found UVC 1.00 device Arducam IMX477 HQ Camera (0c45:636d) [ 8.806595] input: Arducam IMX477 HQ Camera: Arduc as /devices/platform/soc/d0078080.usb/c9000000.usb/xhci-hcd.2.auto/usb1/1-1/1-1.2/1-1.2:1.0/input/input3 But I have no idea how to test further. I've tried cheese: cheese …
-
Reputation Points
- 1 reply
- 5.7k views
- 1 follower
-
-
Hi, I'm curious, is there any qualitative difference between the dedicated application images and the Minimal image followed by a "normal" manual installation of the given application? For example OpenMediaVault (OMV) which comes with tailored installation instructions for Armbian. IOW, does the dedicated application image "only " take care of the OMV installation for you, or is there more to it which I might miss when installing OMV myself (on top of the minimal image)? Thanks!
-
Reputation Points
- 2 replies
- 5.7k views
- 1 follower
-
-
I'm testing the Armbian image for Odroid N2+ ( Armbian_22.08.7_Odroidn2_jammy_current_5.19.17_xfce_desktop) to see if it's a good migration path from the HardKernel base image. Unfortunately I need to get both i2c bus running on the GPIO and so far only the first bus seems to work (i2c-0). Looking into /sys/bus/i2c/devices , it looks like i2c-1 is tied to the hdmi port instead of the 2nd i2c bus on the GPIO : lrwxrwxrwx 1 root root 0 Dec 31 1969 0-0051 -> ../../../devices/platform/soc/ffd00000.bus/ffd1c000.i2c/i2c-0/0-0051 lrwxrwxrwx 1 root root 0 Dec 31 1969 i2c-0 -> ../../../devices/platform/soc/ffd00000.bus/ffd1c000.i2c/i2c-0 lrwxrwxrwx 1 root …
-
Reputation Points
- 4 replies
- 5.6k views
- 1 follower
-
-
For the second time today on my few-days-old Odroid N2+ build with Buster desktop I have a system-wide freeze. Blue LED is constantly on and there is no response to keyboard or mouse events. Was interacting with Plex both times but I only have Plex, Tautulli and Samba server set up. I'm loath to pull the power but 30mins in to the second freeze (I pulled the plug on the first one). What should I be looking for when I get it running again?
-
Reputation Points
- 13 replies
- 5.5k views
- 1 follower
-
-
I know there is a template, but this board is already on the download page as unsupported, just ran a group of tests on it after building a full desktop image, I think we can move it to supported without any issues, the S805X is the same as an S905X with some things turned off, like comparing an H3 and an H2+. Pros: SPI contains u-boot, we don't have to do anything with that. Libre Computer updates the firmware periodically (available on their site) already supports USB boot, etc, and has a "press escape for menu" option, making it very difficult to brick. UMS mode is menu selectable (I feel like we need to look at this. I hav…
-
Reputation Points
- 3 replies
- 5.5k views
- 1 follower
-
-
Hello, I have a La Frite 1gb. Im trying to boot armbian but it wont boot, I have checked the common problems list on the libre computer forum , It stated sd card, power supply etc. I have made sure that none of these are the problem, I have tried 5 different sd cards and im now using a 6th brand new Sandisk Extreme bought in the store (The one recommended by libre computer). I have tried many PSUs , All 5V 3.0A which is supposed to be enough, I get no help in the la frite forum so i thought i would check in with you guys and see if anyone knows what the issue could be. Also, id like to add, it wont boot anything, none of the images of ubuntu destkop, raspbian, etc f…
-
Hello everyone! I bought Khadas VIM1 board and Official FAN(Ali Link) but seems to be not working with Armbian Bullseye, how I can run it? Thanks.
-
Reputation Points
- 8 replies
- 5.4k views
-
-
my C2 did not boot after upgrading from 6.6.63-current-meson64 to 6.12.17. I also tested kernel 6.12.13 from debian minimal image, same problem: Applying kernel provided DT fixup script (meson-fixup.scr) ## Executing script at 32000000 ## Loading init Ramdisk from Legacy Image at 13000000 ... Image Name: uInitrd Image Type: AArch64 Linux RAMDisk Image (gzip compressed) Data Size: 17076402 Bytes = 16.3 MiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 04080000 Booting using the fdt blob at 0x4080000 Loading Ramdisk to 7af01000, end 7bf4a0b2 ... OK Loading Device Tree…
-
Reputation Points
- 5 replies
- 5.4k views
-
-
From time to time, I notice that the HC4 looses its IP address. journalctl then tells me: dhcp4 (eth0): selecting lease failed: -131 But I don't know the reason for it. Sometimes it happens after a reboot. Pulling the ethernet cable off and plugging it in again seems to help and after a few tries, the HC4 is reachable again. I'd be happy to give more information, but I don't know yet how to debug it. I noticed that /var/log (zram) sometimes gets full but I don't know if this is related…
-
Hello All, Have a question, I see there is an option to use eMMC with the Le Potato aml-s905x-cc 1gb (which I got running yesterday), but what eMMC modules actually work with this board (I'm using a MicroSD card on my board at the moment)? Perhaps there should be a thread for Le Potato Hardware Options (just a thought)
-
Has anyone tried using PXE boot and install on ODroid-N2 I have 12 Odroid-N2s, I want to install them automatically over network using FAI, I can seem to find a way to do that, actually I am currently unable to even boot the armbian kernel using netboot # generated by fai-chboot for host default with IP no IP default Debian Testing Netboot Installer(Armbian) LABEL Debian Testing Netboot Installer(Odroid) KERNEL /boot/vmlinuz INITRD /boot/initrd.gz DTB /boot/meson64_odroidn2.dtb APPEND ip=dhcp root=/srv/fai/nfsroot:vers=3 rootovl FAI_FLAGS=verbose,sshd,createvt FAI_CONFIG_SRC=nfs://pxe/srv/fai/config FAI_ACTION=install console=tty0 n…
-
Hi, after a long time I started up my C4 and tried both the standard download kernel as well as a home compiled one. I need SPI on the C4, so I changed the device tree to meson-sm1-odroid-c4-spidev.dtb, and see spidev kernel modul loaded, but no driver, and I don't get any signals on the corresponding pins. Any help is appreciated - would be great to have SPI working again... See you, Michael
-
I have two Le Potato boards (http://ix.io/2ykP http://ix.io/2ykN), I installed Armbian Focal on them. One of the board has defective HDMI (board from Kickstarter?), it has no HDMI output. Other board was ordered from Amazon, a year later. It has HDMI output but colors are not right (white is green, black is purple, etc, HDMI image is not nice but it is usable; it is interesting that when I use HDMI to VGA adapter, colors are right; when board runs in low resolution, colors are right on HDMI too. But when resolution is high, 1950x1200, then HDMI colors are wrong - I swapped HDMI cable without any effect - is this known video driver issue??). So because only one…
-
Hi Installed Armbian_25.2.3_Odroidhc4_bookworm_current_6.12.17-homeassistant_minimal.img an a HC4 and noticed that USB doesn't work. lshw shows: *-usbhost:0 product: xHCI Host Controller vendor: Linux 6.12.17-current-meson64 xhci-hcd physical id: 1 bus info: usb@1 logical name: usb1 version: 6.12 capabilities: usb-2.00 configuration: driver=hub slots=2 speed=480Mbit/s *-usbhost:1 product: xHCI Host Controller vendor: Linux 6.12.17-current-meson64 xhci-hcd physical id: 2 bus info: usb@2 logical name: usb2 version: 6.12 …
-
Hi guys. I'm the maintainer for the Khadas VIM3. There are 2 small issue's with the Armbian images for VIM3, and also for VIM2. armbianmonitor -u http://ix.io/46L9 First off, the VIM3 has all its cores clocked to 1.5Ghz by default. I created a Jira for that a while ago. https://armbian.atlassian.net/browse/AR-1094 My simple fix is in /etc/default/cpufrequtils MAX_SPEED=15xxxxxxx → MAX_SPEED=2400000 But I have no idea how/where to adjust this so it is correct for all VIM3 images. Then for VIM2 and VIM3 (maybe VIM3L and VIM1 too) the HDMI audio isn't working as it should. https://armbian.atlassian.net/browse/AR-1095 I once was…
-
Reputation Points
- 5 replies
- 5.3k views
- 1 follower
-
-
Sometimes when reboot device goes to emergency mode and you can not connect to it remotelly. I read on internet, may be here, that make this [Firmware Bug]. I downgrade Kernel to "Igor" recommended 5.7.15 and there the [Firmware Bug] missing. I tested new and newest Kernel via armbian-config but the [Firmware Bug] is present everywhere. Kernel 5.7.15 seems good without this bug but i have no sounds on Audio out or via HDMI. --- journalctl -xb [Firmware Bug]: Kernel image misaligned at boot, please fix your bootloader!
-
Armbian_22.08.7_Bananapim5_bullseye_edge_5.19.16_gnome_desktop Hello, I'm trying to rotate the desktop from landscape to portrait. Trying to do this in the display settings in the desktop does not work correctly as it only uses the top half of the screen. What does work is to rotate using xrandr: xrandr -o right I'm trying to do this automatically on start up so I have written a script to call from lightdm.conf The script: #!/bin/sh xrandr -o right exit 0 The parts in lightdm.conf [Seat:*] that I've edited: display-setup-script=/home/badger/screen.sh session-setup-script=/home/badger/screen.sh This w…
-
I was trying Jammy (autobuild) with kerenl 5.15.18 on Khadas Vim3 4GB RAM, but is does not start, no HDMI output, no LED activity. Then I tried Hirsute with kerenl 5.13 and that boots fine, but after update new kernel (5.15) and also u-boot is installed and then it does not start again. My solution for now is to boot Hirsute with 5.13 and replace all edge packages with current (linux-dtb-current-meson64, linux-image-current-meson64, and linux-u-boot-khadas-vim3-current). This downgrades the kernel to 5.10.81, but the board can be updated and boots fine.
-
Reputation Points
- 6 replies
- 5.3k views
- 3 followers
-
-
Logs: https://paste.armbian.com/kasujazuwo Hi, I've been looking to run the desktop version of Armbian on the M5 however it will not start (blank screen, no signal). I can see the Debian Icon at startup, and the Armbian Icon at shutdown. startx does not bring it up, however sudo startx will but I'm not sure if this is the best way. I have tested: Armbian_22.11.3_Bananapim5_bullseye_current_6.1.4_gnome_desktop.img Armbian_22.11.3_Bananapim5_bullseye_current_6.1.4_cinnamon_desktop.img and both are the same. Any ideas are appreciated! Thanks.
-
Hello, I have tried Bullseye CLI image 30nov from https://www.armbian.com/bananapi-m5/ flashed with etcher to ensure integrity on sdcard sandisk A1 64G It appears that it loops in /scripts/local-block giving up to mount armbian root even with correct UUID why does it loop like this?
-
Reputation Points
- 6 replies
- 5.2k views
- 3 followers
-
-
Khadas VIM1S is an upcoming low-profile single board computer powered by an Amlogic S905Y4 quad-core Cortex-A35 processor that’s meant to provide an upgrade to the Amlogic S905X-powered Khadas VIM SBC introduced in 2016, and since then renamed to Khadas VIM1. Khadas has been teasing two new SBCs: the low-end Khadas VIM1S with S905Y4 SoC, and the most powerful Khadas Edge2 board equipped with a Rockchip RK3588S octa-core Cortex-A76/A55 processor. I have received both as you can clearly see from the photo above :), but I’m only allowed to write about information available publicly at this time, so today I’ll introduce the Khadas VIM1S which looks just like the VIM1 board. K…
-
I've tried shutdown -h now, poweroff, shutdown -h, all results in a reboot instead of shutdown. I've searched and haven't found a solution, just other people with the same problem. I'm running "Armbian_24.2.1_Lepotato_bookworm_current_6.6.16_cinnamon_desktop.img", has anyone found a solution to this problem? I tried raspbian on the le potato and that will shut down but gives me other issues when installing openhabian. Armbian just seems to work otherwise but I'd like a clean way to shutdown when needed so I don't risk corrupting my sd card.
-
Reputation Points
- 5 replies
- 5.2k views
-
-
Install of Armbian 21.02.2 Buster with Linux version 5.7.15-meson64 and gpiod package installed on the Odroid N2 does not work for gpiomon. The gpiod command gpioinfo and gpioget work fine. Gpiomon fails with message "No such device". Searching for hours I believe the issue is that interrupts have not been assigned to the gpiopins, so appropriate devices don't exist. Any information on when/how to get a fully functional gpiod and associated python package going. Python code using python3-libgpiod also fails on the line.request function with the same "No such device" error.
-
Reputation Points
- 2 replies
- 5.2k views
- 1 follower
-
-
Was wondering if there is any plans to support the recently released ODroid-N2 sbc.
-
Hello everyone, I've recently started migrating a project for Banana Pi M5 from Debian 10 Buster to Armbian, because I've found that the latest versions of it now support the GPU, Mali G31, and come with Panfrost OpenGL driver, which is crucial for this project. Everything was perfect until I had to implement two features: operating with TV via CEC and showing boot logo. Quickly about the last one - as I've understood, we have to use Plymouth, but I didn't really get how to do it, I've tried to activate it but had no success (how exactly see under paragraph). However, it doesn't work on Server Images (even on those that were compiled with build tools and activat…
-
Hi, This is my first try to add a board to armbian build system. I got a BPI M2S since several months, but only had time recently to investigate on this promising SBC. I made a PR here, if somebody wants to try it: https://github.com/armbian/build/pull/4597 The main improvements are to be done for the dts file, since I'm not an expert about such file definition. Only 1 ethernet of the Gbit ports is working, since I copy the config from vim3 that share the same hardware for it. I didn't try to customize u-boot and I use the one for radxa zero2 that works to launch armbian on the board. armbianmonitor -u is here: https://paste.armbian.co…
-
Reputation Points
- 7 replies
- 5.1k views
- 1 follower
-
-
This isn't a question but more of a tutorial. I wanted to install Debian Bookworm with latest kernel to my odroid. I'm documenting my steps and experience here in case you stumble across it and find it useful. At the time of writing, the link on the Odroid HC4 site to download Bookworm is broken. No worries, I thought, I'll just build it myself, doesn't seem too hard. My host system is Windows 10 where I'm building in a WSL 2 Ubuntu. It has GCC 9.3.0 installed. Follow the usual instructions here. My compilation command is: ./compile.sh KERNEL_CONFIGURE= BUILD_MINIMAL=no BUILD_DESKTOP=no EXTERNAL_NEW=prebuilt BOARD=odroidhc4 BRA…
-
Reputation Points
- 1 reply
- 5.1k views
- 1 follower
-
-
Hi there! I've installed Armbian 23.02.0 Jammy on my Banana Pi M5. And I'm using 3.5" display with HDMI interface. The screen has a native 480x320 resolution, but accept a range from 640x480 to 1920x1080. On resolutions over 800x480 is not readable, so I'm able to change resolution with the following line in /boot/armbianEnv.txt extraargs=video=HDMI-A-1:800x480M@87 fbcon=rotate:0 with lower resolutions 800x480 to 640x480 (60 to 87hz) the screen has an offset down of one character line so ther's a blank line up and I don't see login and shell input command down. Looking at 16:9 resolutions I see all the text with the minimum of 896…
-
Reputation Points
- 3 replies
- 5.1k views
- 1 follower
-
-
I have recently acquired a BPI-M2 Pro with what is supposed to be USB WiFi (Realtek RTL8821CU). I am running Armbian 22.08.7 Bullseye. armbian-config does not recognize any WiFi. The output from lsusb -t also does not show the presence of USB WiFi as expected. root@bananapi-m2p:~# lsusb -t /: Bus 02.Port 1: Dev 1, Class=root_hub, Driver=xhci-hcd/1p, 5000M |__ Port 1: Dev 2, If 0, Class=Hub, Driver=hub/4p, 5000M /: Bus 01.Port 1: Dev 1, Class=root_hub, Driver=xhci-hcd/2p, 480M |__ Port 1: Dev 2, If 0, Class=Hub, Driver=hub/4p, 480M Do I have a defective device, or is the WiFi not actually a USB module? Is there something else I need to …
-
Reputation Points
- 8 replies
- 5.1k views
- 1 follower
-
-
Hi, I am using Armbian (latest) image on Banana Pi CM4 and I don't have access to gpio493. I am getting the following error: And looks like gpiochip4xx is not available: When I modprobe this gpio number, I am getting following error: modprobe: FATAL: Module gpiochip493 not found in directory /lib/modules/6.7.2-edge-meson64 Could you please help, how can I enable gpio 493? Thanks
-
Reputation Points
- 12 replies
- 5.1k views
-
-
It took me a day and a week to get it somewhat working but I have Retropie installed and would like to have Emulation Station auto start after login. The setting from within the Retropie Setup script does nothing. Typing "emulationstation" after login does indeed run the program but Id like a way to have it autostart once the Potato is powered on (like a Raspberry Pi 3).
-
hello everyone, can anyone tell me how to install the driver for the RTL8811 WiFi USB dongle?
-
Reputation Points
- 3 replies
- 5k views
- 1 follower
-
-
Hello, i've tried the actually armlogic Image for my six le potatos. (https://dl.armbian.com/lepotato/Ubuntu_xenial_next_desktop.7z) In the first step it looks ok. But then i found you, that there is missing a xfs Module. I need this for a ceph test deployment. After some research i found out, that you can compile you own kernel with this description: https://docs.armbian.com/Developer-Guide_Build-Preparation/ I tried it and copy the kernel to the le potatos. But then a lot of strange things happens. Some of them where starting, some not, and when they started after some time the whole system brokes (looks lik…
-
Reputation Points
- 8 replies
- 5k views
- 1 follower
-
-
Hello All, Le Potato aml-s905x-cc 1gb found some useful items for this neat piece of hardware: ADAFRUIT INDUSTRIES 954 USB-TO-TTL SERIAL CABLE, RASPBERRY PI (1 piece) (excellent cable for console access) comes with 4 wires (Black - GND, White - TX, Green - RX, Red - Power), using the power adapter, leave the red connector off Use a terminal program (PuTTY, etc) and set the baud at 115,200, 8 data bits, 1 stop bits, and no parity, no flow control Need good wireless adapter which works: MK electronics 150 Mbps USB Wi-Fi Adapter Network Wlan Adapter Stick Windows Mac Linux Desktop PC Notebooks 150 MB…
-
Reputation Points
- 1 reply
- 4.9k views
- 1 follower
-
-
How to configure headless similar to the instructions in HardKernel's Wiki? https://wiki.odroid.com/odroid-xu4/application_note/software/headless_setup?s[]=headless#change_resolution_in_xorgconf I'm guessing the device is different?... Also what wold be the rest of the xorg.conf settings? The wiki page only shows the part that should be modified. Thanks.
-
Reputation Points
- 0 replies
- 4.9k views
- 1 follower
-
-
I just got one so I have modified my version of htop for the Raspberry Pi to work on the AML-S905X-CC (Le Potato) that shows cpu temp and current frequency in case anyone is interested. Here's the GitHub : https://github.com/leeadama/htop/tree/lepotato See the Readme for Build Instructions. Once you have it built and installed, you add the temp and frequency display like any other meter. I.E. press F2, arrow all the way to the right and choose Temperature Sensors, press Enter to add it and Enter to confirm. Then just repeat the process for the FreqMeter. Tested on Ubuntu Desktop - Mainline Kernel Linux lepo…
-
Odroid N2+ booting from eMMC with a 4TB USB drive. With the USB drive disconnected, the system boots fine and very quickly. With the USB drive connected, it throws hundreds of errors for about 30 seconds before finally moving on and booting from the eMMC. I have no desire to ever boot from SD or USB, so I would like to just disable those options. I found this topic https://forum.armbian.com/topic/10349-disable-u-boot-usb-support/ but I can't really follow what they're talking about and I have no idea how to patch U-boot or build a new boot image. Is there an easier way to do this? Here's what the errors look like: Hit any key to stop autoboot: …
-
Reputation Points
- 7 replies
- 4.9k views
- 1 follower
-
-
Hi, Like the title says the UART overlays are not working on the armbian radxa zero device if I use the official out-of-the-box image. Using the armbian-config I can enable UART A and B but these changes do not reflect in the /dev/tty devices (using other distros is can see /dev/ttyAML0, /dev/ttyAML1 and /dev/ttyAML4). Unless the devices are called something else i confirm that the overlays are not working. That being said I want to recompile a armbian image with the correct overlays but I am a complete noob. Here is my plan : i successfully compiled a minimal cli armbian image for the radxa zero without any…
-
I am having trouble installing specific hardware dkms because the dkms requires the linux header files for the installed kernel version which are not available or do not exist. Armbian 23.05.1 Ubuntu 22.04 desktop version is build with kernel 6.6.63 but an apt search for the relevant headers finds none. Headers exist for 6.2, 6.5 and 6.8 but not for 6.6. How can I address this?
-
Reputation Points
- 5 replies
- 4.8k views
-
-
Hi everyone, I'm experiencing a severe boot delay on my Banana Pi M5 running Server Armbian Image (v25.2.2 - Banana Pi M5 - Armbian Linux 6.12.21-current-meson64) when no HDMI monitor is connected. The board itself is working fine, but without an HDMI connection, the system takes several long minutes to complete the boot process. Details The system boots normally and quickly when an HDMI monitor is attached. However, without a monitor, in headless mode , the boot process is significantly delayed several minutes (approx. 4 minutes). Blue led blinking normaly. I've Tried modified /boot/armbianEnv.txt by setting: display_autodetect=fals…
-
Reputation Points
- 10 replies
- 4.8k views
- 3 followers
-
-
I have a brand new VIM4 NPU bare board in fanless aluminum case with power supply and Khadas cable. Khadas Ubuntu versions with gnome desktop work perfectly without any slowdown in both emmc and sd version but armbian desktops do not work! Only xfce (via oowow or latest armbian.com version) launches after several minutes but then presents slowdowns. All versions with cinnamon (oblique lines) and gnome (armbian logo) freeze after launching the desktop environment whether with an installation on emmc sd or usb… No problems with server versions, only desktop versions… I wonder if it is the fact of not having a fan and/or the NPU chip that makes the Armbian desktops…
-
Reputation Points
- 6 replies
- 4.8k views
-
-
Hi, first post here. After upgrading Armbian on my Odroid-N2 to 5.8.13-meson64, I can no longer mount using autofs, neither manually nor via systemctl. The error message is: mount: /home/<mountdir>: unknown filesystem type 'aufs'. The Armbian Build Options information suggests that kernel builds include AUFS by default: AUFS ( yes | no ): Include support for AUFS Am I missing something? Armbian version is #20.08.6 SMP PREEMPT Thu Oct 1 18:51:27 CEST 2020
-
Are there any plans of adding webcam drivers to the kernel modules for Le Potato? Specifically, I'm looking to use a uvc video webcam, but can't figure out how to compile it myself.
-
Reputation Points
- 4 replies
- 4.7k views
- 1 follower
-
-
Odroid-C2 (there was no adequate tag) After I upgraded my ssd install from 23.11.1 to 24.2.1, the board didn't boot. When starting 24.2.1 from a fresh sd card, usb and disk leds are on, and the board boots. But they don't show in lsusb. If I reconnect them after the board is booted, the leds stay off (and obviously they don't show in lsusb). Of course, booting from external ssd stops at some point, because usb is lost during the boot (when connecting a display, the failures start to happen on armbian services). Had to restore previous release 23.11.1 from backup on my ssd. Everything works again.
-
Reputation Points
- 4 replies
- 4.7k views
- 2 followers
-
-
I am unable to configure Xorg to ignore (and stop using as its default) the None-1 video device causing me not to be able to display a desktop via the HMDI-1-1 device. It has been suggested (https://ubuntu-mate.community/t/how-to-configure-xorg/26732/3) that I disable this device in the kernel, hopefully, via a kernel option such as : video=None-1:d Does anyone know where (which file) and how (specific method) I should do this?
-
Reputation Points
- 3 replies
- 4.7k views
-
-
Hello, I run armbian 20.08.3 on an Odroid N2 with a dongle wifi. I have upgraded the board from armbian-firmware full 20.08.3 to 20.08.4. After that the screen insn't recognize anymore (it's an AOC e2250Sda) and after some reboot it s doest start anymore. Have I to wait the nex update ? Thanks a lot
-
Hello I've tried to install the newest Armbian image "Armbian_22.08.7_Bananapim5_jammy_edge_5.19.16_cinnamon_desktop.img.xz" Copied with Balena Etcher to SDcard. Attached a serial tty cable and started with card in SD-Slot. Unfortunately it stops while booting. Please can anybody help me ? Here is the serial log:
-
Hello, I know this is a forbidden question, I will adress specially to @chewitt and @Igor. Why I dare to do this? Because today, it is the fist time I managed to run Libreelec (LE) nighly https://test.libreelec.tv/11.0/Amlogic/bananapi-m5/ and have the somehow the same suffering with boot and so on and as I did not give up, I shot the last bug preventing LE to boot. I don't want to register in every forum for each pack , christian forgive me I will put the explanation here. The last image suffer from a missing link..in /flash as it is all momified in squashfs , this need extra skills. wget https://ftp.halifax.rwth-aachen.de/libreelec/L…
-
Reputation Points
- 4 replies
- 4.6k views
- 1 follower
-
-
Today we got working UART A, so I decided to wire up a cheap DCF77 receiver to it. On a first test I got spammed with libre-computer-board ntpd[1518]: parse: convert_rawdcf: start bit / parity check FAILED for "###############RADMLS1248124P124812P1248121241248112481248P??" This was solved with the following kernel patch: diff -Nru libretech-linux.old/drivers/tty/serial/meson_uart.c libretech-linux/drivers/tty/serial/meson_uart.c --- libretech-linux.old/drivers/tty/serial/meson_uart.c 2017-10-24 19:49:30.776000382 +0200 +++ libretech-linux/drivers/tty/serial/meson_uart.c 2017-10-24 19:52:39.660000472 +0200 @@ -362,7 +362,7 @@ writel(val, port->membase + A…
-
Hello all, I noticed that since recently (TM) I got loads of spam from panfrost in my dmesg output: I understand that this has something todo with graphics. The only "graphic" thing I'm doing is running standard Klipper-Screen through HDMI and this seems to be working as always... It definately wasn't there like half a year ago. can I get rid of it? Is it something to worry about? my armbian is running on a Banana-Pi CM4 module of of the eMMC. It's a rather standard installation with Klipper installed via KIAUH. sincerely - cad435
-
Reputation Points
- 10 replies
- 4.6k views
- 1 follower
-
-
I don't understand why I can't update to 5.19. I just updated to various user-space Debian 11.5 packages, but I can't see any newer kernels. root@odo:/boot# apt policy linux-image-edge-meson64 linux-image-edge-meson64: Installed: 22.05.1 Candidate: 22.05.1 Version table: *** 22.05.1 500 500 https://mirrors.xtom.de/armbian bullseye/main arm64 Packages 100 /var/lib/dpkg/status 22.02.1 500 500 https://mirrors.xtom.de/armbian bullseye/main arm64 Packages 22.02.0-trunk.0046 500 500 https://mirrors.xtom.de/armbian bullseye/main arm64 Packages 22.02.0-trunk.0045 500 500 https://mirrors.xtom.de/armbian bullse…
-
Hi I was using: Title: Armbian 21.08.5 Odroidhc4 Debian buster legacy Then something bad pushed me to run apt update/upgrade No ZFS anymore. Installed 22.08.2, but, when tried to install kernel headers using armbian-config, result: "grep: invalid max count" message. What is the current correct way to install Armbian with ZFS? Thanks ChrisO
-
Reputation Points
- 5 replies
- 4.6k views
- 1 follower
-
-
Hi, after the installation of the new kernel version (5.6.15-meson64) on my board (Le Potato), the display have ~1cm offset on the top of the monitor and ~1cm of non-visible element on the bottom. It is basically moved down by ~1cm from the center. I have already had this problem, but it "self solved" by updating the kernel, so i have no hint to solve the problem, only that it is very likely caused by something in the kernel. For the display i use an HDMI connector. I have attached the armbianmonitor log, if some more info are needed, you have only to ask. Thanks in advance for the time and dedicated effort. Have a good day! Edit: Wow,…
-
Reputation Points
- 3 replies
- 4.5k views
-
-
hello, I found default armbian image will cause the CPU temperature very high. My cpu freq is setting 1Ghz and usage is around 20%, This should not cause the cpu to overheat. This is my armbianmonitor -m : ``` Time CPU_cl0/CPU_cl1 load %cpu %sys %usr %nice %io %irq Tcpu C.St. 18:55:22 1000/1000 MHz 0.88 17% 6% 9% 0% 0% 1% 103.0 °C 8/8 18:55:27 1000/1000 MHz 0.89 17% 5% 9% 0% 0% 1% 103.0 °C 8/8 18:55:32 1000/1000 MHz 0.90 17% 5% 9% 0% 0% 1% 103.1 °C 8/8 18:55:37 1000/1000 MHz 0.83 17% 5% 9% 0% 0% 1% 103.2 °C 8/8 18:55:42 1000/1000 MHz 0.76 17% 6…
-
Hi, I recently bought Odroid N2+ (4GB) as a replacement for my raspberry pi 4. With legacy kernel 4.9 boars seems to be working fine. But when I flashed latest 5.10 kernel version it boots but without HDMI signal. I've read some topics here and in hardkernel forum and my conclusion is that my monitor resolution (3440x1440@60Hz) might not be supported by the kernel. I use this monitor. After some tinkering I was able to boot with video by passing following string to bootargs: setenv bootargs ${bootargs} "video=HDMI-A-1:2560x1440@60" Unfortunately the image is flickering and almost unusable in most cases. Here is an excerpt from 4.9 kernel bootlog wi…
-
Reputation Points
- 1 reply
- 4.5k views
- 1 follower
-
-
I've been trying to enable SPI on the board but have had no luck in this. I noticed that in the armbian-config there is no spi option. I have edited the armbianEnv.txt file to include orerlays = spi-spidev param_spidev_spi_bus = 0 I've tried changing the bus to 1 None of these actions have helped. Any advice would be greatly appreciated.
-
Reputation Points
- 2 replies
- 4.5k views
-
-
In my quest to use an ODROID N2 as a time server, I had to figure out how to enable UART_EE_A. Device trees for other boards sometimes enable UART A in the base device tree but the ODROID N2/N2+ does not. I am not sure why device trees don't fully define devices like UART_A and then just leave them disabled instead of partially defining them with missing "pinctrl" entries (as in the N2 device tree). Anyway, I've attached `meson-g12b-odroid-uart-ee-a.dtso` as an example of how to enable UART_EE_A. Additionally: The DT overlays for Meson UARTs (e.g. `/boot/dtb/amlogic/overlay/meson-uartA.dtbo`) are not compatible with …
-
Reputation Points
- 4 replies
- 4.5k views
- 1 follower
-
-
Hi, is posible to add Canbus by a MCP2515 in a spi port ? thanks!
-
Reputation Points
- 1 reply
- 4.5k views
- 1 follower
-
-
Lepotato with Armbian Jammy armbianmonitor -u is here: https://pastebin.com/UVbLxVH0 Trying to use I2c to drive a SSD1306 type oled screen. All wires have been tested for continuity and are good. Screen is connected as follows: Screen SDA -> Pin 27 Screen SCL -> Pin 28 Screen VCC -> Pin 4 Screen GND -> Pin 6 ive enabled i2c-a and i2c-b via armbian-config i2cdetect -y 0 0 1 2 3 4 5 6 7 8 9 a b c d e f 00: -- -- -- -- -- -- -- -- 10: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 20: -- -- -- -- -- -- -- -- -- -- -- -…
-
Reputation Points
- 2 replies
- 4.4k views
- 1 follower
-
-
BananaPi BPI-CM4 new design with Amlogic A311D Quad core ARM Cortex-A73 and dual core ARM Cortex-A53 CPU ,ARM G52 MP4(6EE) GPU,NPU for AI at 5.0 TOPS, support Camera and MIPI-CSI interface ,HDMI output,2 Gigabit port . 4G RAM and 16 GB eMMC flash. BPI-CM4 hardware interface: BPI-CM4 IO baord interface
-
Reputation Points
- 4 replies
- 4.4k views
- 1 follower
-
-
Hello, I want to have the GPU mali integration so I choose Armbian kernel 5.4 But there is no sound l. The command aplay -l not list any hardware. And no sound on HDMI An idea ? If I must choose another image can you tell me the good image ? And can I will keep the bifrost wayland integration ? Thanks a lot.
-
Reputation Points
- 3 replies
- 4.4k views
- 1 follower
-
-
Armbian_23.11.1_Odroidn2_bookworm_current_6.1.63.img.xz was downloaded and flashed to SD card. System booted OK from the SD card and successfully started the OS. Then I used armbian-config to write the root file system to an SSD. After reboot, the system appears to get through the boot stage OK. It also proceeds to start up the OS OK, but then services fail to start. Further action stops temporarily, but pressing the escape key or a function key makes the screen go black for a second or so, returning with what's shown in the last image. No other keys have any ef…
-
Reputation Points
- 6 replies
- 4.4k views
- 3 followers
-
-
After updating my Odroid N2+ today, lo is the only network interface shown when running 'ip a' The update was 18 packages: root@odroidn2p10:~# apt upgrade Reading package lists... Done Building dependency tree... Done Reading state information... Done Calculating upgrade... Done The following packages will be upgraded: armbian-config armbian-firmware armbian-zsh libldap-2.5-0 libldap-common libnss-myhostname libpam-systemd libsystemd0 libudev1 linux-dtb-current-meson64 linux-image-current-meson64 linux-u-boot-odroidn2-current python3-tz sudo systemd systemd-sysv tzdata udev 18 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. Need to g…
-
Reputation Points
- 3 replies
- 4.4k views
- 1 follower
-
-
FYI, Device is Odroid N2+ 4 GB. Some months ago I installed/ran: Armbian_25.2.1_Odroidn2_bookworm_current_6.12.13_xfce_desktop.img with no issues that I could not overcome. I re-downloaded it yesterday and re-installed/ran it on another Odroid N2+ 4GB with no issues. However when I try to install/run: Armbian_25.11.1_Odroidn2_noble_current_6.12.58_xfce_desktop.img "* Desktops are very simple and minimal but containing standard features such as Chromium, Firefox browser, Office tools etc." It leads to a number of issues, but the most important one is no internet browsers are installed that are either visible from the Applica…
-
Hi guys! Image from that link http://imola.armbian.com/dl/khadas-vim3l/archive/Armbian_22.05.1_Khadas-vim3l_jammy_edge_5.17.5_xfce_desktop.img.xz is about 352 Mb. When Im unzip it - 7zip give me error. http://imola.armbian.com/dl/khadas-vim3l/archive/Armbian_22.05.1_Khadas-vim3l_focal_current_5.10.110_xfce_desktop.img.xz - same problem. By the way I have some problem with building image by myself, some time it gives me complete with success, but image is broken too. I think so because first boot take loooooong time with no set root pwd, only rounding circle and second boot don't give me to set root pass and other credentials. So if it possible, could you test that …
-
Reputation Points
- 4 replies
- 4.3k views
- 1 follower
-
-
As the original thread, which was closed by moderator for obvious reason, did attract attention of few peoples having the same problem as me, it would be a waste not to follow up on this, I think. Let me sum up: I have two HC4, one bought in 8.2021 and other one 11.2022, both have two SSDs each. The older one after a kernel upgrade didn't see a second disk any more. I've just tried few kernels I could find with the following results: OK: Linux odroidhc4 5.12.10-meson64 #21.05.4 SMP PREEMPT Wed Jun 16 08:19:35 UTC 2021 aarch64 aarch64 aarch64 GNU/Linux OK: Linux odroidhc4 5.13.12-meson64 #21.08.1 SMP PREEMPT Wed Aug 25 19:35:13 UTC 2021…
-
Reputation Points
- 5 replies
- 4.3k views
- 1 follower
-
-
Hello, I am having hard time installing hwclock 4PCS DS3231 on S905X-CC board. Can anyone please help?
-
Reputation Points
- 5 replies
- 4.3k views
- 1 follower
-
-
Banani Pi M5, Armbian_23.02.2_Bananapim5_bullseye_current_6.1.11_xfce_desktop into SD card, USB drive connected and auto mounted in fstab. Boot loop looking for system into USB. I have to disconnect USB then it boots up from SD. Any help?
-
I downloaded the most recent armbian focal for odroidc2. uname -a Linux odroidc2 5.6.18-meson64 #20.05.4 SMP PREEMPT Mon Jun 15 01:50:20 CEST 2020 aarch64 aarch64 aarch64 GNU/Linux However, linux headers are not available for this version: apt-cache search linux-headers-current | grep meson64 linux-headers-current-meson64 - Linux kernel headers for 5.6.15-meson64 on arm64 Also here, only 5.6.15 available: https://apt.armbian.com/pool/main/l/ I tried to simply use 5.6.15 headers by manually setting the following link: lrwxrwxrwx 1 root root 37 Jul 4 21:00 /lib/modules/5.6.18-meson64/build -> /usr/src/linux-header…
-
Reputation Points
- 4 replies
- 4.3k views
- 1 follower
-
-
I tried 3 las disk images in SD card, update and OMV is not available fo install. In all tutorials show that OMV is available there. But when on my N2, it's not available.
-
Reputation Points
- 1 reply
- 4.2k views
- 1 follower
-
-
I'm using the "Armbian 22.11.1 Lepotato jammy 5.19.17 xfce desktop" image which comes with lightdm windows manger and wayland xserver. I want to use https://github.com/debauchee/barrier but it does not support wayland, so I want to switch to xorg. So far I've tried installing xorg using apt and adding the following line to /etc/lightdm/lightdm.conf xserver-command=Xorg but when I do sudo systemctl restart lightdm the display manager hangs forever with blank screen and blinking cursor.
-
Reputation Points
- 1 reply
- 4.2k views
- 1 follower
-
-
I am trying the first releases of armbian on my new odroid n2 and would like also to test openmediavault which should be available with 3rd party option on armbian-config. But at the moment this software option is not available. Is there a reason for this, maybe the device is very new and not tested for the moment?
-
I bought a le Potato and an emmc module. The module fits fine on my odroid. The le Potato has the same connector gender as the emmc module however and cannot be connected. Do emmc modules come sometimes with male and sometimes female connectors?
-
Checksum not matching for images for odroid n2 for these: Focalstable5.10.ySHA ASC278MApr 4 2021 Focal xfce desktopstable5.10.ySHA ASC802MApr 4 2021 Also after installing images they would crash.
-
Hi all, I'm a bit lost to find the root cause so I share all what I noticed Installed - I'm using Armbian_21.02.4_Odroidn2_buster_current_5.10.27.img image on a eMMC 64Gb on an Odroid N2+ board - I installed docker and have two containers activated from portainer/portainer-ce and linuxserver/plex images - I installed exFat-fuse and exFat-utils to be able to mount an external exFat drive connected via USB Issues - Right after booting, the USB drive is mounted but is not seen by Plex. Restarting the plex container make the trick but I have to do it each time - After some time, the mounting point is not anymore accessible and give me the ' Transport en…
-
Reputation Points
- 2 replies
- 4.1k views
- 1 follower
-
-
Hello, I was running OpenMediaVault on Armbian Buster some time ago and after an update (I suppose) the system would not boot normally anymore. Had to move places shortly after that, so the board stayed in a box for about a year and now I would like to put it back into service. A Bullseye image is required for OMV 6, so I went to the website and downloaded the latest image for my Odroid N2 board : Armbian_23.02.2_Odroidn2_bullseye_current_6.1.11.img.xz I then flashed the 16GB eMMC and plugged it in ... no boot (fixed red led / no network) If I do the same with an SDCard, it boots up normally (blinking blue led / working SSH) …
-
Reputation Points
- 2 replies
- 4.1k views
- 1 follower
-
-
Installing Bullseye from download list works fine, but after `apt update / apt upgrade` or a firmware update through armbian-config, boot process gets stuck with Uboot logo in the corner and won't proceed any further. Any ideas? Using a EMMC card and BalenaEtcher to burn.
-
Reputation Points
- 4 replies
- 4.1k views
- 2 followers
-
-
So, I've noticed there were some updates available, so decided to do so, now running 20.08.7 Focal / 5.8.13 kernel. Now, I did run the nand-sata-install when I first installed armbian a month ago to an external SSD and all's working perfectly. The thing is, a couple of weeks ago, even after this latest update and rebooting, the sbc won't boot up, I had to pull the plug and back about 20 times for it to boot. So this is what I found running dmesg. [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034] [ 0.000000] Linux version 5.8.13-meson64 (root@xeon) (aarch64-none-linux-gnu-gcc (GNU Toolchain for the A-profile Architecture 9.2-2…
-
Reputation Points
- 1 reply
- 4.1k views
- 1 follower
-
-
Currently no /dev/watchdog device on N2 with -current and -dev armbian kkernel. But watchdog present in -legacy. I see meson-wdt kernel module present on image, I transplant meson_wdt segment from dts file of legacy kernel to dev and current. diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dts b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dts index 819afc748828..18990208f269 100644 --- a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dts +++ b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dts @@ -226,6 +226,20 @@ hdmi_connector_in: endpoint { }; }; }; + + wdt: watchdog@0xffd0f0d0 { + compatible = "amlogic, meson-wdt"…
-
Reputation Points
- 2 replies
- 4.1k views
- 1 follower
-
-
I am attempting to install the v4l2loopback module for my device (Le Potato running Armbian 22.02.1 Bullseye) and am running to some issues. I installed linux-headers-5.10.102-meson64 since that matches the kernel image installed: marc@lepotato:/usr/src$ dpkg -l |grep linux-image ii linux-image-current-meson64 22.02.1 arm64 Linux kernel, armbian version 5.10.102-meson64 current marc@lepotato:/usr/src$ dpkg -l |grep linux-headers ii linux-headers-current-meson64 22.02.1 arm64 Linux kernel headers for 5.10.102-meson64 on arm64 current But when I try and install the v4l…
-
Long story short: I used for about one year an odroid HC4 as NFS server and worked fine. Now I would add a player service for it. It mounts an HDMI port, so I tried to plug in the cable and it worked. I were able to see the video output but with no sound. I found there is no detected hdmi card: # aplay -l **** List of PLAYBACK Hardware Devices **** card 0: ODROIDHC4 [ODROID-HC4], device 0: fe.dai-link-0 (*) [] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: ODROIDHC4 [ODROID-HC4], device 1: fe.dai-link-1 (*) [] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: ODROIDHC4 [ODROID-HC4], device 2: fe.dai-link-2 (*) [] Subdevices: 1/1 Subdevice #0: sub…
-
Reputation Points
- 0 replies
- 4k views
- 1 follower
-
-
Hi, I currently have the issue of a non working usb port on my odroidhc4. dmesg output: [ 133.464610] usb usb1-port2: connect-debounce failed The port does not show up when lsusb is entered. uname -a: Linux odroidhc4 6.12.56-current-meson64 #1 SMP PREEMPT Wed Oct 29 13:09:02 UTC 2025 aarch64 GNU/Linux I solved this temporairly a while ago by booting an older kernel (linux-image-6.12.43+deb12-arm64) like mentioned here: Are there any progresses on how to fix this reliably? Because I think still running kernel 6.6.63 is not save. Thanks for your answer in advance, if you need more information I am happy to…
-
Reputation Points
- 6 replies
- 4k views
- 1 follower
-
-
Hello all, As subtitler guy, I experienced many troubles making aegisub work. , I finally made the subtitle editor, working with hardware under armbian jammy but having still annoyances. I want to share my thought and my discoveries on it. First I would like to thanks all who post on this already, including alternative ways such as schroot and of course the armbian team for the improvements of the boot .. schroot allow to run an linux in a linux. According to what I experienced, meson driver development is leaded by oibaf and in advance in ubuntu but here aegisub does exists only on debian. The idea was thus to boot on debian jammy and chroot i…
-
$ stress -c 1 -t 60 & [1] 2578 $ sudo chrt -r -p 95 2578 chrt: failed to set pid 2578's policy: Operation not permitted Why this doesn't work? My actual problem is that Jack Audio can't use real-time scheduling, but this example should demonstrate that there is a general problem probably. (getting ERROR: Cannot use real-time scheduling (RR/10) (1: Operation not permitted), ERROR: AcquireSelfRealTime error) $ uname -a Linux odroidc2 6.6.16-current-meson64 #1 SMP PREEMPT Mon Feb 5 20:14:39 UTC 2024 aarch64 GNU/Linux $ lsb_release -a No LSB modules are available. Distributor ID: Debian Description: Armbian 24.2.1 bookworm Release: 12 Codename: …
-
Reputation Points
- 1 reply
- 4k views
- 1 follower
-
-
Yakov, Why do you list Armbian 23.5 Jammy as a supported load on https://www.armbian.com/radxa-zero/ Armbian 23.5 Jammy works on the 2G version of the Radxa Zero board. Armbian 23.5 Jammy does NOT work on 1G version of Radxa Zero. (and presume the .5G version) - Boot failure loop after identifying boot device on 1G version of Radxa Zero. Has this been fixed? In which version? Where do we find it? Armbian_22.08.0-trunk_Radxa-zero_bullseye_current_5.10.134_minimal.img.xz works on 1G version of Radxa Zero. - https://github.com/radxa-build/radxa-zero/releases/tag/20220801-0213
-
Reputation Points
- 3 replies
- 4k views
- 1 follower
-
-
Hi, Does anyone know how to get rid of the error on Odroid N2+ ? The error appears after some time of using GUI app on XFCE DRM_IOCTL_MODE_CREATE_DUMB failed: Cannot allocate memory Failed to create scanout resource
-
Reputation Points
- 2 replies
- 4k views
- 1 follower
-
-
Hi, Odroid N2+ Armbian 22.05 Jammy Kernel 5.10.y, Size: 360Mb, Updated: Jul 1, 2022 + XFCE installed by means of armbian-config htop shows Systemd: degraded (1/372 failed) root@n2p-dev:~# systemctl --failed UNIT LOAD ACTIVE SUB DESCRIPTION ● fwupd-refresh.service loaded failed failed Refresh fwupd metadata and update motd LOAD = Reflects whether the unit definition was properly loaded. ACTIVE = The high-level unit activation state, i.e. generalization of SUB. SUB = The low-level unit activation state, values depend on unit type. 1 loaded units listed. root@n2p-d…
-
Hi there, I have two Le Potatos, one for each of my boys. One of them has Raspbian OS on it and the other has Armbian. What we have found is that the one with Raspbian is able to run Scratch (https://scratch.mit.edu/), but the one that I have loaded with Armbian gives an error that says that WebGL is not working properly on Chromium. On Firefox I don't get an error, but Scratch doesn't work right. I purchased these on the same day, so as far as I know, the hardware should be the same. Is there a way to enable WebGL on Armbian so that my boys can use Scratch on this system? In case it helps: https://paste.armbian.com/wepugikade
-
Been using the Lepotato with Armbian fine for a few weeks. Typically accessing via ssh over the network, suddenly after a reboot, it's not appearing on my network, solid red light, solid green light, and a blue heartbeat as well as the NIC light blinking as if network connection is functioning normally, but my network is not assigning an IP address and the potato isnt sending any packets. What might the problem be here? HDMI shows no output, using Armbian Jammy made for the tato.
-
Reputation Points
- 2 replies
- 3.9k views
- 1 follower
-
-
I loose the HDMI signal and screen get black because startx (main launcher script to enter Xorg!) from xinit package has been forgotten to be installed. After doing the magic combination CTRL+ALT+F1/F2 and login in console mode, this will fix the issue and open the gates of cinnamon sudo apt install xinit Enjoy , SoSie
-
Reputation Points
- 1 reply
- 3.9k views
- 2 followers
-
-
Sorry if I ask, but I can't seem to find an actual definitive answer anywhere about this. Is there at the moment or will be in the future a way to have an hardware accelerated MATE desktop using armbian on le potato? And if there is/will be, what limitations does/would it have? (opengl/window compositing/video decoding/video encoding...) Thanks in advance
-
Reputation Points
- 0 replies
- 3.9k views
-
-
So, first of all, pretty much a newbie here. I'm trying to add protonvpn to my HC4. I was able to do it with Ubuntu Mate (from the HC4 webpage) on the same hardware, so I'm pretty sure it's possible on Armbian. To be fair, the ProtonVPN website says that raspbian is not supported (and I assume they meant to say ARM) but I have been able to get it to work on Mate, and the problem on Armbian seems to be the Public Key and nothing else. After installation, the app will start, but won't work, so some successful compiling for ARM seems to be happening. What I did: - Downloaded the deb file for Debian based stable release - Tried GDebi and Apt, but dpkg wo…
-
Reputation Points
- 0 replies
- 3.9k views
- 1 follower
-
-
I recently upgraded from an Odroid HC2 to and Odroid HC4. I reinstalled the OS following the instructions on armbian.com, flashing onto a MicroSD. After migrating the apps (mostly dockers), I found that restic (backup tool) was generating out of memory errors and bringing the system to a halt in a way the HC2 didn't. This surprised me as it's overall higher specced, and the configuration was otherwise identical. After some troubleshooting, I realised there was no swap drive specified, and that creating a swap eliminated my out of memory errors. I'm not sure if the source of the "problem" is the swapfile here, but it at least…
