Rockchip
Quick links to search tags:
Banana Pi M7, BIGTREETECH CB2, Khadas EDGE2, Libre Renegade, NanoPC T6 LTS, NanoPi M5, NanoPi M6, NanoPi R3S LTS, NanoPi R4S, NanoPi R6S, NanoPi R6C, NanoPi R76S, Odroid M1, Orange Pi 4 LTS, Orange Pi 5, Orange Pi 5 Plus, Pinebook Pro, ROCK 5A, ROCK 5B, ROCK 5C, ROCK 5 ITX, ROCK PI E, ROCK PI S, ROCK S0, Zero 3W/3E, RockPRO64, Tinkerboard
-
RTL8852BE is the official recommended Wifi module for Orange Pie 5 PLUS, but it is not available in Armbian 24.5.1 Linux Vendor Kernel 6.1 without a driver module. Hope the official driver will be added to the 6.1 kernel. Thanks.
-
Reputation Points
- 13 replies
- 16.5k views
- 2 followers
-
-
please, helpme with thist message in boot :
-
Reputation Points
- 11 replies
- 7.8k views
- 2 followers
-
-
New Rock 5C work everything fine on Armbian 24 - bookworm stable release but only issue is that Wifi is not working on all stable release except Daily / Rolling releases. It seemed like something is misconfigure about wifi driver. You can see that I tested on both kernel 6.1.43 (stable) and latest edge and it's not working. But this daily release work like charm.
-
Reputation Points
- 3 replies
- 6.1k views
- 1 follower
-
-
I installed latest vendor image and because of the wifi issues I switched to the edge kernel. I messed up my fstab, couldn't connect with ssh, so I plugged it to my monitor and a keyboard, but there was no video. Eventually, I fixed it by booting vendor image from my sd card, but I got curious. I know, that vendor image just works, so I flashed edge image to my sd card to see what's wrong. The monitor recognizes the presence of the board, but it's just a black screen. I can ssh to the board, so the image definitely booted, but there's just no video. Here's the log from my original installation. I kept 6.8 kernel because the video is not important to me.
-
Reputation Points
- 7 replies
- 5.5k views
- 1 follower
-
-
I tested some stable armbian images. I want to use the Rock 5C as server, so no desktop is needed. Ubuntu is prefered. First I flashed `Armbian_24.5.1_Rock-5c_noble_vendor_6.1.43.img.xz` wich doesn't work. Log from first boot is attached at the bottom. Second I flashed `Armbian_24.5.1_Rock-5c_noble_edge_6.8.10.img.xz` wich is working well. SSH comes up as usual. Would be nice to use the vendor kernel (6.1.43) instead of the bleeding edge (6.8.10) one, because it is not reccommend and not all features are working. I OCR a screenshot from first boot with `Armbian_24.5.1_Rock-5c_noble_vendor_6.1.43.img.xz` Welcome to Armbian 24.5.1 noble!…
-
Reputation Points
- 9 replies
- 6.1k views
- 3 followers
-
-
I installed latest Armbian_24.5.1_Orangepi5-plus_bookworm_vendor_6.1.43_minimal.img and I can't get wifi to work. The adapter is RTL8852BE. I installed armbian-firmware-full and the adapter is shown in lspci, but there is no wireless interface. armbian-config does not list wifi as an option. armbianmonitor -u
-
Reputation Points
- 6 replies
- 10.8k views
- 4 followers
-
-
I lost whole day yesterday to try boot with new images from Armbian download page - kernel 6.1 / kernel 6.8 bookworm/trixi and none boots... If I take Ubuntu or Debian image I have no problem to boot from. Do you have the same?
-
playing around with armbian-config after switiching to vendor kernel - missing "toogle hardware configuration" Left is on (previous legacy vendor) kernel with "24.5.1 and right is legacy kernel with "24.2.1"" Just curious if anyone know why that is? Perhaps I should have taken other steps when switching to vendor kernel(I have rebooted and confirmed it is running vendor kernel prior to screenshot)
-
Reputation Points
- 0 replies
- 1.7k views
-
-
Can you help me with the contents of the file name? I understand edge, vendor, but then there are other suffixes that are not clear to me: are gnome-oibaf_desktop the same "kernel release" as the xfce_desktop or minimal? Or there are patches that are applied only to a specific version? Thanks!
-
Reputation Points
- 4 replies
- 2.3k views
-
-
I tested Armbian 24.5.1 Noble Gnome + trunk MESA/VPU Kernel: 6.6.31, Size: 1.3GB, Release date: May 25, 2024 on my PBP (sd card). What does not work: - Sound - HDMI Monitor on PB dock Thank you
-
I just upgraded to Arabian 24.5.1 using `apt-get upgrade` and now I cannot load ip_tables: # modprobe ip_tables modprobe: ERROR: could not insert 'ip_tables': Exec format error I’m not sure what to make of it.
-
Reputation Points
- 7 replies
- 5.4k views
- 1 follower
-
-
I tried both the 6.8.10 and 6.1.43 releases from CI pipeline and none of these has the ap6275p wifi option in the armbian-config tool. There was a previous post that mentioned that the module got merged for the new kernels but is there an ETA to have this one in the CI releases? I'm curious to try vlc but haven't been able to install that one yet with the new releases.
-
Reputation Points
- 3 replies
- 3.1k views
- 2 followers
-
-
Hi Referring to https://forum.armbian.com/topic/32667-usb-c-port-doesnt-work-on-pinebook-pro-after-the-latest-update-on-kernel-662/ USB -C is not working. I also tried 6.7.4-edge with no success. Looking for a solution G??gle found this: https://www.linuxquestions.org/questions/slackware-arm-108/pinebook-pro-usb-c-port-not-working-after-kernel-upgrade-4175732886/#google_vignette referring to Megi`s 6.7 kernel. The link was outdated, but the base worked and had versions 6.8 and 6.9. Tried both with a lot of success: USB-C working and the HDMI monitor output as well as Gigabit Ethernet work like a charm again. 😄 The only small issue remaining: Sound is not w…
-
Hi I installed a nvme SSD to my rockpro64 (with a generic PCIe adapter card). Somehow it only uses a x1 link instead of x4. I also observed the same behaviour with a x2 SATA card (only x1 link established). Output of lspci: LnkSta: Speed 2.5GT/s (downgraded), Width x1 (downgraded) To rule out hardware issues, I also tried the same setup with Manjaro-ARM which correctly negotiates a x4 link. LnkSta: Speed 2.5GT/s (downgraded), Width x4 dmesg for Armbian [ 2.221206] rockchip-pcie f8000000.pcie: host bridge /pcie@f8000000 ranges: [ 2.221296] rockchip-pcie f8000000.pcie: MEM 0x00fa000000..0x00fbdfffff -> 0x00…
-
Hi there Suddenly HDMI output stopped working on my orange Py 5. I've been using the board with an external monitor for a month but on the next boot HDMI connection disappeared. external display using type-c output works fine; I've already tried several HDMI cables and monitors - no results; no visual damages detected on the board; flashing image doesn't help; The system is Armbian 24.2.1 jammy OS with GNOME version 42.9. Any ideas what next steps should I do to find out whats happen?
-
Reputation Points
- 6 replies
- 6.8k views
- 1 follower
-
-
-
Hello, sorry for my English. I have an Orange Pi 5 8gb and a 512gb nvme SSD. I would like to use it to install 2 operating systems (Android 12 + Batocera). This way, when starting the orange pi, it asks which operating system I want to start on. Is this possible?
-
Reputation Points
- 3 replies
- 5.3k views
-
-
I'm using a few Libre Computer Renegades as headless servers, and they're working well (thank you!), but I'm wanting to set one up for personal use, and I've discovered that when I plug headphones into the analog audio jack, the left and right channels are reversed. (Also, the default volume, (for example, from speaker-test in a terminal) is too loud for headphones.) sudo armbianmonitor -u Says: System diagnosis information will now be uploaded to https://paste.armbian.com/Error adding document. so I've attached armbian-hardware-monitor.log instead. armbian-hardware-monitor.log
-
Reputation Points
- 0 replies
- 1.9k views
- 1 follower
-
-
It seems that the HDMI output does not have any option beyond 1080P. Tried multiple monitors. The font size at uboot stage seems right but the resolution maxed out at 1080P after kernel starts. Tried Armbian 24.2.1 with 6.6.16. Could be related with this: https://forum.manjaro.org/t/rk3399-hdmi-output-for-resolutions-different-than-1080p/90644. but patches should be applied at Kernel 6.4: https://www.phoronix.com/news/Linux-6.4-imx25-Rockchip-4K Attached is the screenshot when connected with DELL 25inch monitor. Should have 2K option. diagnoses: https://paste.armbian.com/gaketoluye Thank you
-
Reputation Points
- 4 replies
- 3.8k views
-
-
I have some problem starting Linux image with my OPi 5+. I just got an OPi 5+ 16Gb RAM no eMMC. I flashed official Android image into SD card with SDDiskTool following the instruction in wiki. It worked. Then I do the "Data Reset" in Android Settings. The board doesn't boot anymore. I re-flashed Android into the SD, and it worked again. Then, I want to try Linux. I flashed Joshua Riek ubuntu-22.04.3-preinstalled-desktop-arm64-orangepi-5-plus.img.xz into the same SD with balenaEtcher. It doesn't boot. I tried again with Armbian_24.2.1_Orangepi5_jammy_legacy_5.10.160_gnome-amazingfated_desktop.img.xz and official Ubuntu image as well. None of them ma…
-
Hey everyone, I'm starting to lose my mind here. I've got an Orange Pi 5 which works great with a micro SD card. Now I got myself a nvme ssd and all I want to do is move my system from the sd card to the ssd. I've created an image of the sd card on my PC using "dd" and then wrote it on the ssd using dd again. It seemed to work fine, the only issue seems to be, that the UUID of the partitions on the ssd were the same as on the sd card, that's why I changed the UUID of the root partition on the ssd using "tune2fs -U random /dev/nvme0n1p2". I booted up the Pi with my sd card again and used armbian-config to flash mtdblock0 (boo…
-
Reputation Points
- 10 replies
- 29k views
-
-
Before writing I searched the forum a bit but couldn't find any recent posts about it. I have an OPI5 board and on NVME I would like to install armbian. I downloaded the image to micro sd and it boots fine. At this point I don't know what to do because I had to waste a lot of time on it some time ago and I don't remember the steps. With the armbian-config utility is it possible to clone the armbian release I am using on the micro sd? I remember that this wasn't possible some time ago. I would like to know specifically the steps to take and whether it is advisable to delete any old partitions on nvme. Thank you
-
Reputation Points
- 8 replies
- 13.6k views
- 1 follower
-
-
I've noticed that some system images will start the OrangePi with 4:2:2 output on HDMI instead of 4:4:4. This causes artifacts, especially when there's white text on a red background. What's the interface or method to change this? Does this have to be done via U-Boot or can it be done in userspace?
-
Reputation Points
- 3 replies
- 2.7k views
- 1 follower
-
-
Updated: The Armbian vendor kernel version now includes Panthor, and will soon be able to run it as well. Waydroid images: https://github.com/WillzenZou/armbian_fork_build/releases/download/willzen-armbian-24.5.0/2.waydroid-panthorv10-240416-v1.img.tar.gz Note: Waydroid needs to be run in the Wayland desktop environment. (Such as Gnome wayland, KDE wayland session) What's work: OpenGL ES is ok, I have tested some game: Mincecrat, gameSHINE, Monument Valley 2 What's not work: Vulkan. Video hardware decode and encode. How to use Waydroid 1. To install Waydroid,…
-
Reputation Points
- 4 replies
- 17.5k views
- 2 followers
-
-
I've compiled mainline kernel 6.6 which runs well on my OrangePi/RK3399. The only problem left is getting H.264 decoding working. Unfortunately, when I query /dev/video1 which is the node created by the hantro-vpu driver, only MPEG2 and VP8 are shown as supported codecs for decoding. No H.264, even though I've read many places that the mainline hantro driver supports H.264. Has anyone else had this problem? Is there something else I need to do to get this working?
-
Reputation Points
- 9 replies
- 6.8k views
- 1 follower
-
-
Im running Armbian 24.2.1 jammy on odroidm1 with additional zfs volumes. On update, sometimes I had to reinstall the zfs kernel module, but now I have the problem, that the system does not recognize the kernel headers: sudo apt-get --reinstall install zfs-dkms Reading package lists... Done Building dependency tree... Done Reading state information... Done 0 upgraded, 0 newly installed, 1 reinstalled, 0 to remove and 0 not upgraded. Need to get 2,397 kB of archives. After this operation, 0 B of additional disk space will be used. Get:1 http://mirrors.dotsrc.org/armbian-apt jammy/jammy-utils arm64 zfs-dkms all 2.2.3-1 [2,397 kB] Fetched 2,397 kB in 1s …
-
-
I purchased the wifi + bt module. It is RTL8852BE. my armbian: Linux orangepi5-plus 5.10.160-legacy-rk35xx #1 SMP Fri Feb 2 07:51:33 UTC 2024 aarch64 aarch64 aarch64 GNU/Linux My Bluetooth never works. It cannot be listed under hciconfig: vnc@orangepi5-plus:~$ hciconfig -a vnc@orangepi5-plus:~$ rfkill ID TYPE DEVICE SOFT HARD 0 bluetooth bt_default blocked unblocked 1 wlan phy0 unblocked unblocked vnc@orangepi5-plus:/$ sudo cat /var/log/dmesg | grep "\(luetooth\|RFKILL\)" [sudo] password for vnc: [ 4.299662] kernel: Bluetooth: Core ver 2.22 [ 4.299678] kernel: Bluetooth: HCI device and connection …
-
Orange Pi 5 plus. It seems that in the 'edge' kernels, ssh is disabled by default. Since HDMI doesn't function this is a problem. I used the debugging UART and after setup I got the message "ssh.service is disabled" I enabled the service and all is well. Any reason why ssh would be disabled?
-
Reputation Points
- 7 replies
- 9.7k views
- 1 follower
-
-
Been trying to play 4k youtube videos with VLC and I haven't had any luck with vp09 and mp4 files. Is VP9 supported with 24.2.1 + kernel 5.10.160? I have no issues with hardware decoding of mp4/h264 in vlc but is vp9 hardware decoding possible? Browser seems to play youtube in 4k but not sure which codec it is using
-
Reputation Points
- 0 replies
- 1.9k views
- 1 follower
-
-
Hi all, I'm using a UEFI based edge ubuntu 24.04 image which reported a kernel stack trace (system still seems functional and no ongoing issue/messages) - [ 22.382942] rcu: INFO: rcu_sched detected expedited stalls on CPUs/tasks: { 5-.... } 6 jiffies s: 381 root: 0x20/. [ 22.382966] rcu: blocking rcu_node structures (internal RCU debug): [ 22.382972] Sending NMI from CPU 7 to CPUs 5: [ 22.382983] NMI backtrace for cpu 5 [ 22.382995] CPU: 5 PID: 92 Comm: kworker/u16:2 Tainted: G W 6.8.5-edge-arm64 #2 [ 22.383004] Hardware name: Orange Pi Orange Pi 5 Plus/Orange Pi 5 Plus, BIOS v0.9.1 10/12/2023 [ 22.383009] Workqueue: writeb…
-
Hey everyone. New to Armbian and Orange Pi, but no stranger to everything I ever try do do being a major hassle! So here's the deal. Installed Armbian jammy 5.1 for orange pi plus. Working nicely. Except some of you might remember me from earlier today when I was struggling to get my ax210ngw working correctly (thanks by the way. Fixed that)! So I follow the process to switch from SD card to my Samsung 980 pro 1tb nvme. Bit of confusion getting it to show as an option in armbian-install, but I got it. Formatted in ext4 with a partition via gparted--now every time I try to run the install script, no matter which option I choose, it either freezes or…
-
I haven't tried Jammy with 6.1.43 but the kernel doesn't say rc anymore so curious of the status. How does this build compare in terms of feature and performance with 5.10? Is all the video decoding supported? The RK3588 Kernel support page says that hdmi audio is not supported - is that really the case? Is gnome/wayland supported? I see that only KDE is listed there.
-
Reputation Points
- 1 reply
- 3.2k views
- 1 follower
-
-
In March 2023 I bought an OPI5 and immediately went for armbian, but I had problems and reported it in the link in this POST. in 2024: I bought the SD cards and other power supply directly from the manufacturers to see if the OPI5 works. I downloaded and burned the latest stable version of Bookworm and the results were the same, errors and everything froze. Before throwing OPI5 in the trash, I downloaded "nightly builds (unstable)" and installed it on an nvme and... it works without problems, I've had no problems for 13 days. In conclusion, the SD card reader is damaged and I can only use the NVME. HELP: I ask you for help with the command (.…
-
Reputation Points
- 7 replies
- 3.2k views
- 1 follower
-
-
Sorry, don't have the Armbianmonitor info handy but wanted to get this started... I'm trying to bring up a Libre Renegade RK3328-CC for use as a media center. Armbian's performance is absolutely wonderful compared to the other builds I've tried on this box. Unfortunately, I want the HDMI output going to a Samsung Frame TV, and resolution negotiation fails badly -- I get obvious rasters with black between them, nowhere near the 4K that this TV model is capable of and not even a smooth conversion (Note that the eyes here suggests that the black line is occurring every third raster or something like that...) What information I have gathered so far: …
-
Reputation Points
- 7 replies
- 5.3k views
- 1 follower
-
-
Also the function keys don't seem to work either. Any fix?
-
Reputation Points
- 0 replies
- 2k views
-
-
New 6.x based kernels for OPI 4 LTS seems to be a hit or miss for HDMI monitors. Some work, and others especially TVs dont output video at all. Images with 5.15.x kernels dont have this issue.
-
Reputation Points
- 3 replies
- 3.9k views
- 1 follower
-
-
If someone is interested can easy setup OledStats for OrangePi5 and SSD1306 Hardware: Orangepi5 SSD1306 OLED display Software Armbian Jammy KDE Neon 6.1.43 Files attached in ZIP archive device.py PixelOperator.ttf setup.py stats.py How to: 1) add overlay wget https://raw.githubusercontent.com/orangepi-xunlong/linux-orangepi/orange-pi-5.10-rk3588/arch/arm64/boot/dts/rockchip/overlay/rk3588-i2c5-m3.dts sudo armbian-add-overlay rk3588-i2c5-m3.dts reboot 2) connect OLED display to I2C5 M3 Pins SDA + SCL (pins 1(VCC),2(SDA),3(SCL) and 5(GND)) check connection sudo i2cdetect -y 5 must be detected 3c value …
-
Reputation Points
- 9 replies
- 5.9k views
-
-
Hi all, reporting a regression in new Armbian 24.2.1 kernel version. New kernel is causing Orange Pi 4 LPS not to boot most of the time, when it boots, then there is no network. Kernel hangs with oops errors on the screen, and all debugging stuff. Sorry that I did not caught any of them on my phone, but it would have been incomplete anyway. How to reproduce: Install any 24.2.1 based system on Orange Pi 4 LTS Upon first boot, you will have issues. No Ethernet network. Second boot will most likely not succeed no matter what you do and system will brick permanently, by not booting at all (no video output), or booting and then showing kernel crash. …
-
Reputation Points
- 5 replies
- 4.3k views
- 2 followers
-
-
@SteeMan the thing is I have a RockPro64 and the only way to get DP alt-mode working on the USB-C port is on the 4.4 kernel which isn't supported by newer versions. Is there any backup repo for buster? Thanks
-
Reputation Points
- 7 replies
- 4.2k views
-
-
I've found information on how to use your own IR remote controller from this site: https://forum.odroid.com/viewtopic.php?f=215&t=44671 In short: 1. Enable logging from the IR kernel module, enter in a terminal: sudo -i echo 1 > /sys/module/rockchip_pwm_remotectl/parameters/code_print dmesg -w 2. Check if your remote is supported by pressing the keys on your remote. It should give you info like: [ 3485.342354] USERCODE=0xfb04 [ 3485.369309] RMC_GETDATA=fd 3. Download the overlay file below and edit the usercode and the code for each key. So for like with the key above it'll be 0xfd 4. Place the header f…
-
Reputation Points
- 0 replies
- 4.3k views
- 2 followers
-
-
I create a file 98-use-serial.rules under folder /etc/udev/rules.d . But symlink not created . My purpose is to fix USB port names, As COM1 COM2 COM3 This is the content of 98-usb-serial.rules: SUBSYSTEM=="tty",ATTRS{busnum}=="1",ATTRS{devnum}=="2",SYMLINK+="COM1" SUBSYSTEM=="tty",ATTRS{busnum}=="4",ATTRS{devnum}=="2",SYMLINK+="COM2" SUBSYSTEM=="tty",ATTRS{busnum}=="5",ATTRS{devnum}=="2",SYMLINK+="COM3" I used to fix the USB port on Asus Tinker S, Khada_VIM3 , all worked fine. I have no idea why Orange Pi 4 LTD not working.
-
Hello friends: I have opi5 with the spi removed, which spiloader do I use to boot from the sd card? Thank you so much
-
Reputation Points
- 1 reply
- 1.8k views
- 1 follower
-
-
Hello, I tried to install the RTL8821CE card on Orange Pi 5 Plus, but only the Bluetooth is on, the wifi not working. Which driver i should use? I am using Armbian 24.2.1 Jammy with Linux 5.10.160-legacy-rk35xx here is the dmesg of admin@orangepi5-plus:~$ nmtui admin@orangepi5-plus:~$ dmesg | grep 8821 [ 5.588211] pci_bus 0003:30: root bus resource [mem 0x9c0000000-0x9ffffffff pref] [ 8.482106] rtw_8821ce 0002:21:00.0: enabling device (0000 -> 0003) [ 8.493940] rtw_8821ce 0002:21:00.0: Firmware version 24.11.0, H2C version 12 [ 8.534600] rtw_8821ce 0002:21:00.0: rfe 6 isn't supported [ 8.534719] rtw_8821ce 0002…
-
My current TV doesn't have CEC but I'm planning to replace it with something that has CEC support and would really like to automate the on/off thing... Is cec-utils supported or is there an alternate kernel API?
-
Reputation Points
- 2 replies
- 3.6k views
- 1 follower
-
-
Hi all, Just want to share this issue i came across from my recently purchased OPI5+ 32GB version. I noticed it freezes when transferring .img from micro SD card to eMMC or NVMe drives via the command line. Now the img file are armbian OS and no its not the img file issue. at times I can get it to around 70seconds and it will freeze. hard reboot is required, unable to complete the transfer. I have also tried to reduce the bs=10 speed but still the same. Now i have also got the 16GB version and this works fine with no issues... Good chance there is something wrong with this latest hardware..…
-
Reputation Points
- 61 replies
- 30k views
- 5 followers
-
-
I just installed with the latest KDE image, but I'm able to reproduce this with any of the images available. After going through the initial configuration, wifi works great. I updated apt and upgraded everything. Then I installed the armbian-firmware-full package. After rebooting wifi still works. Then I setup Bluetooth for my mouse and keyboard. They work correctly. After rebooting I no longer see any networks to connect to for wifi. If I disable Bluetooth and reboot wifi works again and so does Bluetooth. Is this an issue of daemons or drivers loading in the wrong order?
-
Reputation Points
- 0 replies
- 1.6k views
- 1 follower
-
-
I just installed with the latest KDE image, but I'm able to reproduce this with any of the images available. After going through the initial configuration, wifi works great. I updated apt and upgraded everything. Then I installed the armbian-firmware-full package. After rebooting wifi still works. Then I setup Bluetooth for my mouse and keyboard. They work correctly. After rebooting I no longer see any networks to connect to for wifi. If I disable Bluetooth and reboot wifi works again and so does Bluetooth. Is this an issue of daemons or drivers loading in the wrong order?
-
Reputation Points
- 0 replies
- 1.2k views
- 1 follower
-
-
what is new? download (temporally) final versions https://www.armbian.com/khadas-edge-2/
-
Reputation Points
- 2 replies
- 2.7k views
- 1 follower
-
-
I'm trying to update python on my armbian bookworm to 3.12 but I cannot find any packages for bookworm. I regret not going with the ubuntu one now 😕 because that one has the deadsnake packages. Any known alternatives? (beside compiling your own packages)
-
Reputation Points
- 2 replies
- 10.3k views
- 1 follower
-
-
Tinkerboard (not 2) not booting after kernel updates for some reason. Who knows how to fix this?
-
Reputation Points
- 38 replies
- 15k views
- 4 followers
-
-
Hello I'm running the NAS on Orange PI 5. I've run Armbian with EDK2 from https://github.com/armbian/build/pull/5900. The system starts from SSD disk connected via PCIE card with 4 SATA ports. I wanted to run simple fan control via GPIO, but setting the value 1 or 0 on GPIO has no effect and the multimeter connected to GPIO always shows 2.85V. How I did it. I installed wiringOP as the manual says. I selected GPIO 0 and entered the commands gpio mode 0 out gpio write 0 0 I connected a multimeter to GPIO 0 but it always shows 2.85V when I did gpio write 0 1 the multimeter also shows 2.85V gpio readall shows 1 in column V when "gpio write 0 1" com…
-
I have a RockPro64 that I have been using for many years as a server. It is currently running Armbian bookworm 12.5. Most of the storage is on an M.2 SSD attached to the PCI socket and is subdivided into disk volumes using linux LVM2. Today I accepted the Armbian kernel upgrade from 6.1.50 to 6.6.16 During the reboot it failed to mount any of my LVM volumes because the device nodes where not present. I found this article about how to recover the situation: https://unix.stackexchange.com/questions/11125/lvm-devices-under-dev-mapper-missing While in rescue mode I ran the suggested command vgchange -a y <name of volume gr…
-
Reputation Points
- 0 replies
- 2k views
- 1 follower
-
-
Well, I am trying to flash armbian to my board, but after I run upgrade_tool ef in mistake. I can't do anything via maskrom/loader at all wherever Windows or linux. Then I try to unbrick it via flash the "MiniLoaderAll.bin" via "upgrade_tool db" and "ul" but them don't work at all(Timeouted),How can I do with it?
-
Reputation Points
- 0 replies
- 2.2k views
- 1 follower
-
-
Hello friends, htop does not show me the temperature, I am attaching information about my system (I have the libsensors library installed). If someone can help me please. Thank you. OS: Armbian 24.5.0-trunk.89 trixie aarch64 Host: Xunlong Orange Pi 5 Kernel: 6.8.0-rc1-edge-rockchip-rk3588 Uptime: 1 hour, 14 mins Packages: 333 (dpkg) Shell: bash 5.2.21 Terminal: /dev/pts/0 CPU: (8) @ 1.800GHz Memory: 187MiB / 7687MiB
-
Reputation Points
- 3 replies
- 4.2k views
- 1 follower
-
-
So I was messing around with my new OrangePi-5+ and installed the EDK2 UEFI firmware for Rockchip RK3588 platforms onto the SPI flash (/dev/mtdblock0). After which I tried all sorts of images and kernels with varying success, only the 5.10.160-legacy-rk3588 kernel would really have a working display. Until I tried a generic UEFI arm64 image (Jammy-CLI on a USB stick) which gave a working display, albeit at 1080p max. (my monitor is 4K) with no acceleration (after the extra steps), and installed the Mate desktop (just my preference). The big caveat is that it does not recognize the SD-card, EMMC or SPI-flash, just regular drives (e.g. sda/nvme0n1 etc) and I'm…
-
Reputation Points
- 5 replies
- 29.1k views
- 1 follower
-
-
I built armbian using the branch 23.11 with legacy-kernel 5.10.160 for use as a Nextcloud server. Version: Armbian-unofficial 23.11.0-trunk Bullseye \l . 5.10.160-legacy-rk35xx After running sudo apt upgrade there were a few packages which were being upgraded successfully from 23.11.0-trunk to 23.11.1. Unfortunately the package armbian-bsp-cli-orangepi5-plus-legacy cannot be upgraded to 23.11.1 due to the base-files still being on 23.11.0-trunk. The system is running fine though. $ sudo apt update && sudo apt list --upgradable Hit:2 http://deb.debian.org/debian bullseye InRelease Hit:3 http://deb.debian.org/debian bullseye-updates InRe…
-
Reputation Points
- 3 replies
- 3.8k views
-
-
Hi guys. I have been using a RockPro64 as a miniserver for many years. It runs stable most of the time. I have assigned it a host name "ab2" via armbian-config. It usually responds well to this alias. Only from time to time it happens that it no longer responds to the hostname. Only a reboot helps. Do you have any idea what this could be? PS Thanks for your great work! Sem
-
Reputation Points
- 1 reply
- 2.3k views
- 1 follower
-
-
Hi, I've been running Armbian legacy server on my 5+ for a month now. I had trouble initially with my EMMC not booting, but I discovered, I had to wipe the SPI Nor then using Armbian config to flash it, then write to EMMC. When a new version of Armbian comes out for the 5+ and it may be a 6.8 kernel build, will I need to re-flash the SPI before I can install the newer version of Armbian (or another image from that's not Armbian?) before updating the EMMC. I found the steps on the Radxa site insightful for a general overview of SPI Nor and flashing (I understand it not an OPi5 x board), but it's not clear to me if a different OS will ne…
-
Reputation Points
- 0 replies
- 3.2k views
-
-
Hi, I have orange pi 5. I searched all over internet for information how to set on startup/power on GPIO pins behavior, but i cannot find anything. Most of GPIO pins are set to IN mode 1. Sadly I need them to output mode 1. I am scared something could burn this way since i set them to though wiringPI after kernel boot sequence is complete. Can some one give information how I can set them up at earlier point when I power on the board? I found that DTB/DTS file could do it. But there is no clear information / pin addresses I should set. Thanks in advance! Regards!
-
Reputation Points
- 0 replies
- 1.9k views
- 1 follower
-
-
I'd like to congratulate you for a great release (24.2.1) with KDE! I was looking for a guide to install KDE in a minimum version, but I could not trim it down enough, and this release solved my issues. Everything is working smoothly, video acceleration is there, Wi-Fi (AX210) is there, bluetooth is there! A real pleasure to use. Best, team!
-
Reputation Points
- 1 reply
- 1.9k views
- 1 follower
-
-
Hi, I went to see if there were any updates to the OPi5+ images and saw the OPi5 had updates. I clicked on the link on the main download page. https://www.armbian.com/orangepi-5/ https://redirect.armbian.com/orangepi5-plus/archive/ I've come back and now it has desktop images but no server images.
-
Hi all! I have a problem with Armbian images on kernel 5.10.160 (jammy & bookworm Armbian_23.11.1_Orangepi5-plus_***_5.10.160.img) When starting from the SD card the nvme device is not visible root@orangepi5-plus:~# lsblk NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINTS mtdblock0 31:0 0 16M 0 disk mmcblk1 179:0 0 58G 0 disk ├─mmcblk1p1 179:1 0 256M 0 part /boot └─mmcblk1p2 179:2 0 57.1G 0 part /var/log.hdd / mmcblk0 179:32 0 233G 0 disk mmcblk0boot0 179:64 0 4M 1 disk mmcblk0boot1 179:96 0 4M 1 disk zram0 254:0 0 7.7G 0 disk [SWAP] zram1 254:1 …
-
Reputation Points
- 1 reply
- 1.9k views
- 1 follower
-
-
Hi Team, I want to build or get pre-built armbian image for kernel 4.4 with wifi : rtl8723as enabled. Please help or provide any suggestion to build armbian image for rockpi-e. Any help or suggestion will be appriciated.
-
Reputation Points
- 3 replies
- 3.1k views
- 1 follower
-
-
I have been working on rk3328 (kernel 6.1) based board recently and have been trying to bringup wifi RTL8723AS module using rockpi-e image. As there is no direct support available for this module I have tried to cloning it from github and building it but it gives compilation errors. Hence I referred to drivers available in the kernel and found one for the module similar to that of my module (RTL8723BS), cross verified through user manual and datasheets and build it using armbian. The driver gets built properly and even initializes upon powerup but it isn't getting into probe. The wifi is interfaced through SDIO to the board. Any idea what might b…
-
Reputation Points
- 0 replies
- 2.2k views
- 1 follower
-
-
Hello, unfortunatelly I post again, because of the latest problem with broken install of initramfs .... The system is unable to write it to uboot and gives the error about unsupported architecure. Every standard commands are probed, without result. it comes always the same error.
-
Reputation Points
- 4 replies
- 5.1k views
- 1 follower
-
-
I have a custom PCIe x4 lane card that I'm trying to integrate with a RockPro64 SBC. This custom card has been tested with many users on different platforms including a linux x86 system. When I try this card in a RK3399 system, I get a strange result when I view the assigned address space with the lspci command. It appears the address assigned is the exact value of the BAR address size for each BAR. If I change the BAR size the assigned address changes to that value. Below is a dmesg dump along with a lspci output for my device. Device is [ad00:001e]. Any guidance? dmesg: [ 2.395091] rockchip-pcie f8000000.pcie: host bridge /pcie@f8000000 ranges: [ …
-
Needed/wanted to add Bluetooth to my OPi5 and also needed WiFi at the same time. Did not want to use 2 USB ports so I tried the T2UB. Working well. Bluetooth appeared on my Armbian Ubuntu Jammy setup and I plugged in the dongle. It saw a few of my bluetooth devices. Reason I wanted bluetooth is to use a controller for some games/emulators. I'll make another post for that. My PS4 Dualshock controller is not showing up in the list of devices. My version is an older version, Armbian 23.06.420 Jammy with Linux 5.10.160-rk35xx No end-user support: built from trunk Conclusion: TPLink T2UB should work properly on Armbian Ubuntu desktop.
-
Reputation Points
- 0 replies
- 1.3k views
-
-
On a fresh install from the website on kernel 6.1 bookworm/Jammy when rebooting the board a kernel panic occurs and the device will not boot unless power cycled. This was not the case even a few months ago on a 6.6 edge kernel. I also tried the current edge 6.7 kernel and the board wouldn't boot at all not that I expected it to. The board says 3308B on the chip(samsung memory) and ive also tried two different micro sd. Anyone else having this issue? Serial output is below of the relevant failure Thanks for anyone willing to look. Update: Reboot works fine on rockpi-s ordered more recently late 2023 with non-samsung ram mo…
-
Reputation Points
- 1 reply
- 2.7k views
-
-
I only have options 1,4,5,7 on my nand-sata-install utility and can only boot from a single armbian microsd card but no other. /dev/mtdblock0 shows no files. Everything has been fine till now! Would love some help. Thanks
-
i am taping in the dark here and in need of some help. i am running openhab on armbian 23.8.1 server and i need to get audio out on 3.5 jack for alerts. openhab has only two options system speaker and web audio. web audio plays on client like browsers using pulse audio. But if i use system speaker nothing comes out. What can i do to get sound on 3.5mm out on opi? is it even possible? i have this but this is also where my knowlege ends so help needed. aplay -l **** List of PLAYBACK Hardware Devices **** card 0: rockchipdp0 [rockchip-dp0], device 0: rockchip-dp0 spdif-hifi-0 [rockchip-dp0 spdif-hifi-0] Subdevices: 1/1 Subdevice #0: subdevice #0 card…
-
Hi, I tried to connect an external USB 3.2 gen 2x2 4TB SSD drive to the only USB-C port available on the Rockpro64, but it's not recognized. I don't know if I need to install some packages for it to work? Any help would be very appreciated! I am on Ubuntu Jammy based Armbian: 6.1.63-current-rockchip64 #1 SMP PREEMPT Mon Nov 20 10:52:19 UTC 2023 aarch64 aarch64 aarch64 GNU/Linux It works well with the same cable on a Macbook Pro. Kind regards, Baptiste dmesg [ 4.879030] usb usb1-port1: Cannot enable. Maybe the USB cable is bad? [ 4.880111] [drm] Initialized panfrost 1.2.0 20180908 …
-
I want to share some information about an issue that I see on my OPi5+. Since I got it I am messing around with it and everything works great so far with the edge 6.7 kernel. One thing I noticed though was, that right after installation with nothing connected and when idle, there was one kernel process that was constantly consuming around 10% CPU time and the load stays at 1. The process was irq/136-hym8563. The number varies of course after each boot. Kernel driver is rtc_hym8563. Since it is build into the kernel I was not able to unload it as a first test. Side node, the issue is not seen on the Rock5b, so it seems OPi5+ hardware specific. Even if bot…
-
Good day, I have Opi 5 and bought this display https://www.aliexpress.com/item/1005005641383181.html?src=google&aff_fcid=66031a1404104c2cb62a43359c4edcd8-1705719622481-01990-UneMJZVf&aff_fsk=UneMJZVf&aff_platform=aaf&sk=UneMJZVf&aff_trace_key=66031a1404104c2cb62a43359c4edcd8-1705719622481-01990-UneMJZVf&terminal_id=b834b596955b44a1bf643629f5ba5647&afSmartRedirect=y . It was a blind buy ... And now I can't get it work if its even possible. I'm its my first time trying to get display on these boards usually use them trought Monitor or TV and it works flawlessly. Cant find even config.txt . But now im lost at how to get …
-
Hmm, seems i need someone holding my hand all steps of the way 😇. Soon i'll need to pay some.. 🥰 I got my OPI5plus working from emmc with nvme-to-sata adapter on edge kernel and now i have 5 HDDs and 1 SSD connected to it. Intended for ZFS with cache... But : ZFS module won't build. I installed linux-headers and tried # apt install zfsutils-linux zfs-dkms. --- Setting up zfs-dkms (2.1.9-2ubuntu1) ... Loading new zfs-2.1.9 DKMS files... Building for 6.7.0-rc1-edge-rockchip-rk3588 Building initial module for 6.7.0-rc1-edge-rockchip-rk3588 configure: error: *** None of the expected "bops->release()" interfaces were detected. …
-
Hi gals & guys, Came over to this forum from the OPI forums which seem.. rather low on real-user activity. I am quite new to the SBC Arm64 platform and have many questions. I am an experienced sysadmin on x86/amd64 and still figuring out the differences. I bought a Orange Pi 5 Plus 32G of RAM and i am running of the 256G emmc. I am able to run different OS's (OPI-Ubuntu, OPI-debian, plain Ubuntu and Armbian). As i intend to use the board as server i didn't look into Android and the like.. My plan is running (OMV) from the emmc and attaching ZFS storage by means of a nvme-to-sata adapter and providing iscsi storage from there to my home-lab with my VM's …
-
Reputation Points
- 9 replies
- 15.4k views
-
-
and, BTW, this will probably work on any SBC that has pwm and working port of wiringPi (wiringOP is much simpler than the dtbo method, IMO) WHY: I don't like fans that run full speed ALL the time pwm fans are a bit limited on the ground in small size, and expensive The SBC has pwm pins, so why not use them none of the examples I have found are adequate, either gpio off/full or excessive python scripts, 40 lines or more,, the bash script is ~ 10 lines Some of the wiringOP/gpio packages don't work (ubuntu-full desktop) try the commands in rc.local, if they don't work, then,,, dpkg -l |grep wiring; apt remove ..... git clone https://github.com/orangepi-x…
-
When executing a command - sudo opt upgrade - returns an error: Setting up linux-image-legacy-rk35xx (23.11.1) ... Armbian 'linux-image-legacy-rk35xx' for '5.10.160-legacy-rk35xx': 'postinst' sta rting. * dkms: running auto installation service for kernel 5.10.160-legacy-rk35xx [ OK ] update-initramfs: Generating /boot/initrd.img-5.10.160-legacy-rk35xx W: Possible missing firmware /lib/firmware/rtl_nic/rtl8125a-3.fw for module r816 9 W: Possible missing firmware /lib/firmware/rtl_nic/rtl8107e-2.fw for module r816 9 W: Possible missing firmware /lib/firmware/rtl_nic/rtl…
-
Reputation Points
- 2 replies
- 2k views
- 1 follower
-
-
I installed Armbian 23.11 Bookworm Kernel 6.1, Size: 482Mb, Release date: Nov 30, 2023. After installation, a CH340 based board was connected to my original Tinkerboard and recognized. Subsequently, I used armbian-config to provide the default desktop (Cinnamon flavor). Thereafter, the CH340 board is incompletely recognized. Specifically, no device is presented as /dev/ttyUSB?. The device appears in the list from lsusb, the kernel module ch341.ko loads, but no device in /dev. The forum search shows a previous instance of a similar issue many years back. I attempted to build the driver from wch.cn, but the kernel sources pulled from armbian-config were for the Linux tinker…
-
Reputation Points
- 6 replies
- 4.5k views
- 2 followers
-
-
My setup includes orange pi 5 plus, Samsung NVME SSD M2 4 TB with Armbain os. 256 GB eMMC and Intel BE 200 Wi-Fi. There are no drivers for the intel BE 200 Wi-Fi or any instructions to make it work.
-
Reputation Points
- 7 replies
- 9.1k views
- 2 followers
-
-
!!! Warning !!!: Think twice before you upgrade kernel on your PineBook Pro. After years unfortunately I decided to unlock upgrades Armbian Kernels and upgraded kernel to the newest one (current) - 5.15.93. After reboot Armbian couldn't find my encrypted root disk and booting ended every time in (initramfs). I installed again kernel 5.10.60 #21.08.1 and Armbian finds my encrypted disk again. Of course still there is no information that I have to enter the password to unlock disk but only black screen. Happily I know that I have to enter the password when the screen is black. Every upgrade of Armbian is connected with a dose of stress that I'll have to …
-
pi@opi5:~/AoC-2023-cplusplus$ lscpu --all --extended CPU SOCKET CORE L1d:L1i:L2:L3 ONLINE MAXMHZ MINMHZ MHZ 0 0 0 0:0:0:0 yes 1800.0000 408.0000 1800.0000 1 0 1 1:1:1:0 yes 1800.0000 408.0000 1800.0000 2 0 2 2:2:2:0 yes 1800.0000 408.0000 1800.0000 3 0 3 3:3:3:0 yes 1800.0000 408.0000 1800.0000 4 0 0 4:4:4:0 yes 2256.0000 408.0000 2256.0000 5 0 1 5:5:5:0 yes 2256.0000 408.0000 2256.0000 6 1 2 6:6:6:0 yes 2304.0000 408.0000 2304.0000 7 1 3 7:7:7:0 yes 2304.0000 408.0000 2304.0000 Why the odd cortex a76 MAXMHZ …
-
Installed: Armbian_23.11.1_Orangepi5-plus_bookworm_edge_6.7.0-rc1 The analog device is visible, but there's no sound from the headphone jack. The hdmi device is not visible. aplay -l **** List of PLAYBACK Hardware Devices **** card 0: Analog [Analog], device 0: fe470000.i2s-es8328-hifi-analog es8328-hifi-analog-0 [fe470000.i2s-es8328-hifi-analog es8328-hifi-analog-0] Subdevices: 1/1 Subdevice #0: subdevice #0 There is no sound when I play a test file: aplay -D hw:0,0 /usr/share/sounds/alsa/Noise.wav Playing WAVE '/usr/share/sounds/alsa/Noise.wav' : Signed 16 bit Little Endian, Rate 48000 Hz, Mono apl…
-
Reputation Points
- 4 replies
- 5.3k views
- 2 followers
-
-
does displayport over usb-c dock work for you? It doesn't for me neither on 5.15 nor on 6.1.
-
Reputation Points
- 4 replies
- 4.4k views
- 1 follower
-
-
Hello people, Happily running Bookworm, because it was the mainstream download for OPI5 a few months ago, I now see that the main download for OPI is back to Jammy. Apart from hardware accceleration, Bookworm runs great for me. In fact HA is not crucial for my server usage, though it would be nice. Question: what is the reason the main OPI5 download is now back to Jammy in stead of Bookworm? And what would be the advantages of going back from Bookworm to Jammy? (Got the aluminium passively cooling case for the OPI5, so far it's been great, 10 minutes of stresstesting all 8 cores doesn't get above 70 degrees celsius. For reference my…
-
Hello everyone, and Happy New Year. One question about Orange Pi 5 Plus: i have installed a wifi module (supported than what the official Orange documentation reports) AX210NGW in my Orange Pi 5 Plus main board with Operating System: Armbian 23.11.1 bookworm and Kernel: Linux 5.10.160-legacy-rk35xx. I copied in /lib/firmware the firmware of the module (https://intel.ly/3S0QZrA). if from the terminal I run: lspci I see the device but in "Armbian-config" in hardware section don't see the wifi module, and I can't activate the module to surf the Internet or the local network in wifi. The question is: am I forgetting any steps to setup the wifi module cor…
-
Reputation Points
- 9 replies
- 10.6k views
- 1 follower
-
-
New OPI5+, unable to finish install because ethernet doesn't work. I haven't been able to figure it out and my searches turned up nothing. journalctl has the following messages: - hpptx phy lane locked! - rk_gmac-dwmac fe1c0000.ethernet error: no phy at addr -1 - stmmac_open: cannot attach to phy (error -19) I've checked power supply, cables, edited the interfaces file, and more , with no success. I have an Orange Pi 5 that I can swap as is in its place and everything works. Coupled with the fact that I couldn't find mention of the errors, I'm hoping that someone can help me before I give up and return the OPI5…
-
Reputation Points
- 19 replies
- 10.6k views
- 1 follower
-
-
Hello, i'm using Armbian 23.11 Jammy-amazingfated Gnome. Kernel 5.10 If to seek a couple of times in h264 1080p BD remux'es it will cause system restart. Any video players are affected. Tried mpv, vlc, kodi and others. Problem affect just h264 1080p remuxes, that typically are 30..40 Gb, smaller h264 or even larger h265 files seem to work fine. I tried fresh install of armbian, where no rkmpp is installed, then h264 files plays/seeks fine, in software mode of course. Once I did sudo update/upgrade, that also installs rkmpp and other rockchip stuff, then videos start to play with rkmpp and problem is back. I've tried disabling hw deco…
-
I've got Orange Pi 5 Plus board with 16 Gb of RAM, 256 Gb of eMMC, Realtek RTL8852BE-CG wireless module. SD card is Samsung EVO Plus 32Gb. I tried to run Armbian images on this board (from the SD-card I've mentioned before) but it was absolutely failed. I tried 5 images: Armbian_23.11.1_Orangepi5-plus_jammy_legacy_5.10.160_gnome-amazingfated_desktop.img.xz Armbian_23.11.1_Orangepi5-plus_bookworm_legacy_5.10.160.img.xz Armbian_23.11.1_Orangepi5_jammy_legacy_5.10.160_gnome-amazingfated_desktop.img.xz Armbian_23.11.1_Orangepi5-plus_bookworm_edge_6.7.0-rc1.img.xz Armbian_23.11.1_Orangepi5-plus_jammy_edge_6.7.0-rc1.img.xz which…
-
Reputation Points
- 27 replies
- 20.2k views
- 2 followers
-
-
This https://github.com/Joshua-Riek/ubuntu-rockchip/wiki/Orange-Pi-5 produces nearly 0 dropped frames at 4K 60fps on https://www.youtube.com/watch?v=LXb3EKWsInQ While latest Armbian_23.11.1_Orangepi5_jammy_legacy_5.10.160_gnome-amazingfated_desktop.img.xz and doing immediately after install, only these commands: sudo add-apt-repository ppa:liujianfeng1994/panfork-mesa sudo add-apt-repository ppa:liujianfeng1994/rockchip-multimedia sudo apt update sudo apt dist-upgrade sudo apt install mali-g610-firmware rockchip-multimedia-config exactly like it says on https://www.armbian.com/orangepi-5/ and sudo reboot produces alot of dropped frames on same youtube …
-
Reputation Points
- 4 replies
- 4.3k views
- 3 followers
-
-
Hello, as already mentioned in topic USB C port doesn't work after upgrading to the latest kernel 6.6.2 . The previous problem with not working left usb 3 port persist no more. Everything is fine. As I remember , before update the usb c port has worked with the adapter and the devices like mouse, usb flash etc. Now it doesn't work any more, furthermore it gives no signal of life. There is 0 amps current measured, also dmesg -W gives no output at all after plugging in the device. PS: I was unable to upload the report file, also the service paste.armbian.com doesn't work at the moment.
-
Reputation Points
- 6 replies
- 4.4k views
-
-
I am using Wifi/BT USB dongle to connect network for Orange Pi 5. But it does not work with Armbian. It works smoothly with Orange Pi's Ubuntu and Debian distros. I just need to insert the dongle into USB 3 to work. Is there anything I can do to use the dongle with Armbian? My dongle is "USB WiFi Bluetooth Adapter Dual Band 2.4/5.8Ghz Wireless RTL8821CU Don-ig"; https://www.ebay.com.au/itm/404244701011
-
After looking at this message from @Seb042 I thought it would be better to open a new topic to discuss this. From what I saw from my install: $ dmesg ... [ 6.166453] iwlwifi 0002:21:00.0: api flags index 2 larger than supported by driver [ 6.166480] iwlwifi 0002:21:00.0: TLV_FW_FSEQ_VERSION: FSEQ Version: 93.8.63.28 [ 6.167021] iwlwifi 0002:21:00.0: loaded firmware version 59.601f3a66.0 ty-a0-gf-a0-59.ucode op_mode iwlmvm [ 6.267334] iwlwifi 0002:21:00.0: Detected Intel(R) Wi-Fi 6 AX210 160MHz, REV=0x420 [ 6.273748] iwlwifi 0002:21:00.0: reporting RF_KILL (radio disabled) [ 6.450150] iwlwifi 0002:21:00.0: WFPM_UMAC_PD_NOTIFIC…
-
Reputation Points
- 7 replies
- 5.5k views
- 1 follower
-
-
Hello everyone! I was struggling to make wiring work on OrangePi 5 Plus armbian. Tried everything and came up with a solution that worked for me. I was constantly getting these errors: wiringPiSetup: mmap (PWM) failed: Operation not permitted wiringPiSetup: mmap (GPIO) failed: Operation not permitted I'm on 23.8.2. 1. Install armbian and update apt sudo apt update 2. As stated in OrangePi5Plus wiki page I got .deb installer for wiringPi on OrangePi Now here's the link to this file: https://github.com/orangepi-xunlong/orangepi-build/blob/next/external/cache/debs/arm64/wiringpi_2.51.deb 3. The mos…
-
Reputation Points
- 8 replies
- 16.8k views
- 2 followers
-
-
When connected to some PC monitors, the image is larger than the physical screen: about 20 pixels at the top and bottom sides, and 50 pixels at the right and left sides are missing. This happens as soon as the board boots (without logo), the start of lines are truncated, and this also happens on text ttys (Ctrl + Alt + F1..6). I guess it's about a boot env variable, but I could not find it.
-
This image works OK, and we now have both a 6.7 kernel AND graphics. Minor issues: EzCast stupid windows Wifi adapter does not plug and play. The vertical USB port does not sense plugging in a device (Wifi) Good work, Gullik
-
Hi, I've had my 5+ for a week now and tinker with it when I can. Some things I've noticed... Using Amrbian legacy 5.10 legacy.... the system draws about 2.2w idle using a USB meter and no peripherals attached. When using the trying the latest 24.2.0-trunk.79, the power draw increases to 3w idle. I also noted the LED flickers between green and red rather than blue and red with legacy. My guess is more peripherals are being enabled. When using legacy, the first time i run an apt-get update there are 39 'gets'. When I then added a launchpad ppa and run again I only get 6. Not sure why that is. I cannot get…
-
Reputation Points
- 7 replies
- 6.2k views
-
-
Hello , looking to upgrade from SBC Rock64 to RockPro64< however, on the homepage it is mentioned, that https://wiki.pine64.org/wiki/ROCKPro64_Software_Releases Since my Rock64 is running aready Linux kernel 4.4 and i am looking to upgrade, both from Rock64 and from SDcard to eMMC, my question, if this limitation still applies to RockPro64 with newer editions of Armbian, also since there is no mention of it on the official Armbian Page for RockPro64 https://www.armbian.com/rockpro64/ Thank you very much
-
Reputation Points
- 1 reply
- 2.8k views
- 1 follower
-
-
Hello, sorry if this has been answered somewhere else. I was just wondering how i upgrade my Orange Pi 5 running Arbmian 23.11.1 Bookworm w/ Linux 5.10.160-legacy-rk35xx to the latest Kernel. I tried using `sudo armbian-config` and updating via that with kernel upgrades unfrozen but it doesn't seem to work. Is there something I'm missing? Startup splash below: ___ ____ _ ____ / _ \| _ \(_) | ___| | | | | |_) | | |___ \ | |_| | __/| | ___) | \___/|_| |_| |____/ Welcome to Armbian 23.11.1 Bookworm with Linux 5.10.160-legacy-rk35xx System load: 4% Up time: 0 min Memory usage: 8% of 3.83G IP: …
-
Reputation Points
- 6 replies
- 8k views
- 1 follower
-
-
Hi, I'm pretty new to this forum may be I will ask some already answered questions, but here they are: I just had a new orangepi 5 plus card and I failed to use the "buses": - I2s: didn't find anywhere how to activate it (i'm trying a dac as a soundcard). Didn't find the hifiberry-dac overlay neither (ok maybe this one is just for raspberry). - spi: I plugged a simple mcp3008 to the spi pins but can't read anything on it (i have the /dev/spidev0.0/1 and /dev/spiddev4.0/1 devices). I think I respected the rights pins. - i2c: when I activate the overlays in armbianEnv.txt, I can see a lot of messages every seconds with dmesg about rk-hdmi. Ma…
