Rockchip
Quick links to search tags:
Banana Pi M7, BIGTREETECH CB2, Khadas EDGE2, Libre Renegade, NanoPC T6 LTS, NanoPi M5, NanoPi M6, NanoPi R3S LTS, NanoPi R4S, NanoPi R6S, NanoPi R6C, NanoPi R76S, Odroid M1, Orange Pi 4 LTS, Orange Pi 5, Orange Pi 5 Plus, Pinebook Pro, ROCK 5A, ROCK 5B, ROCK 5C, ROCK 5 ITX, ROCK PI E, ROCK PI S, ROCK S0, Zero 3W/3E, RockPRO64, Tinkerboard
-
anyone has it working???
-
Reputation Points
- 5 replies
- 5.5k views
- 2 followers
-
-
Hi, I went to see if there were any updates to the OPi5+ images and saw the OPi5 had updates. I clicked on the link on the main download page. https://www.armbian.com/orangepi-5/ https://redirect.armbian.com/orangepi5-plus/archive/ I've come back and now it has desktop images but no server images.
-
Hi, after upgrading to Armbian 24.11.3 noble with 6.1 Kernel I have this problem that every time I turn off my TV that is connected to OPI with HDMI, then turning it back on again it will never have a HDMI signal. Same thing happens when I unplug the HDMI cable and plug it back in. I can reproduce it every single time - not just occasionally. It is not a hardware or cable problem, the exact same setup has worked flawlessly for long time with older Armbian and 5.1 kernel. I tried disabling all of the KDE power saving settings, also totally disabled kpowerdevil - with no change. SSH still works fine, the OS has not crashed. …
-
i recently purchased an orange pi 5 plus 16gb with the wifi / bt card, the aluminum wifi case, fan and 1tb ssd. when i go to the official website i see different images there none of which seem to work 100%. i mean i was able to get each up and running but what i noticed is that the graphical drivers would not load. i saw a youtube video claiming armbian has the right driver support for the mali 610 gpu. can someone assist me getting this to work? im big into emulation gaming and right now it doesnt even have Vulkan support i crave. someone help thanks
-
Ubuntu Noble had some early day issues with default key ring not being stored properly and or synced to the logged in user and users getting popup prompts about the default keyring locked. A week ago I downloaded Armbian Noble 25.5.2 desktop onto my OPi5. It has been my daily driver for the past week or so. It has been a really nice release for my OPi5. All has been good except the default keyring popups. I have created new users, deleted stored keyrings, changed passwords among other things. At this point I am able to store the default keyring password (which is the same as my login PW). However, when launching chromium, and ProtonVP…
-
Hello friends: I have opi5 with the spi removed, which spiloader do I use to boot from the sd card? Thank you so much
-
Reputation Points
- 1 reply
- 1.8k views
- 1 follower
-
-
FYI. Searching some forums around the web, stumbled on a post that indicated the TU3 Nano would work on the OPi 5. I thought I would give it a try. It worked for me plugged it in reboot. Download speed topped out at 200mb on the usb3 (top plug) connected to 5Ghz wifi. Happy days. Running the Feb.27 stable version of Armbian_23.02.2_Orangepi5_jammy_legacy_5.10.110_gnome_desktop. TC
-
Reputation Points
- 4 replies
- 3.8k views
- 2 followers
-
-
Hi Anyone else having problems with NVMe disks on the Orange Pi 5 Plus 16gb? I have a WD Black SN750 and use the original power supply, I have tried with Armbian and Ubuntu Rockchip and with both I have random failures at startup not recognizing the drive. When fail I do this tests: 08:13:33 cristian@orangepi5-plus ~ → lspci 0000:00:00.0 PCI bridge: Rockchip Electronics Co., Ltd Device 3588 (rev 01) 0000:01:00.0 Non-Volatile memory controller: Sandisk Corp Device 501e 0002:20:00.0 PCI bridge: Rockchip Electronics Co., Ltd Device 3588 (rev 01) 0002:21:00.0 Network controller: Realtek Semiconductor Co., Ltd. RTL8822CE 802.11ac PCIe Wireles…
-
Reputation Points
- 18 replies
- 11.1k views
- 1 follower
-
-
Hello friends, htop does not show me the temperature, I am attaching information about my system (I have the libsensors library installed). If someone can help me please. Thank you. OS: Armbian 24.5.0-trunk.89 trixie aarch64 Host: Xunlong Orange Pi 5 Kernel: 6.8.0-rc1-edge-rockchip-rk3588 Uptime: 1 hour, 14 mins Packages: 333 (dpkg) Shell: bash 5.2.21 Terminal: /dev/pts/0 CPU: (8) @ 1.800GHz Memory: 187MiB / 7687MiB
-
Reputation Points
- 3 replies
- 4.2k views
- 1 follower
-
-
please, helpme with thist message in boot :
-
Reputation Points
- 11 replies
- 7.8k views
- 2 followers
-
-
Degin: MounlAng root Tile syslel ... Degan: munning escrapusr cucad-lop ... uonc. Begin: Running /scripts/local-premount ... Scanning for Btrfs filesystems done. Begin: Waiting for root file system ... Begin: Running /scripts/local-block ... done. done. Geve up waiting for root file system device. Cowmon problems: ⁃ Boot args (cat /proc/cmdline) - Check rootdelay= (did the system wait long enough?) - Missing modules (cat /proc/modules; ls /dev) ALERT! UUID=db80a2ac-ec37-4fda-91db-92604becfcce does not exist. Dropping to a shell! BusyBox v1.30.1 (Ubuntu 1:1.30.1-7ubuntu3.1) built-in shell (ash) Enter 'help' for a list of built-in commands. (initramfs) …
-
Reputation Points
- 1 reply
- 2.8k views
- 1 follower
-
-
I was able to flash armbian bookworm cli to the ssd using balena etcher but when I boot the OPI5 from the sdcard and run lsbk it can only see the sdcard any ideas ...
-
Hi there, my new OPi5 with Armbian Bookworm Cinnamon mesa backoprted does not see my mPCIe SSD disk. Just got this: https://allegro.pl/oferta/nowy-superszybki-dysk-ssd-512gb-m-2-nvme-2242-9605598735 \ module, but it is not recognized by the system. Armbianmonitor output: https://paste.armbian.com/huhedogene lspci -v output: 0004:40:00.0 PCI bridge: Rockchip Electronics Co., Ltd RK3588 (rev 01) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0, IRQ 89 Bus: primary=40, secondary=41, subordinate=41, sec-latency=0 I/O behind bridge: [disabled] [16-bit] Memory behind bridge: [disabl…
-
Reputation Points
- 21 replies
- 9.2k views
- 1 follower
-
-
Hi there, I pourchased OPi5 (not preferred OPi5 Pro, because of Armbian lacking support), flashed Debian 24.8.1_bookworm_6.10.6_cinnamon_backported_mesa_desktop, configured (user, switch to static IP, user). Worked OK. Now, ssh'ing into showed "113 packages upgrade". Did "apt upgrade". Download OK, but when applying apgrade process hung twice: - once on "configuring libc", had to power off, then restarted (after an apt-get suggested in response to apt upgrade). Upgrade hung second time (no progress on bottom bar for hours, no new ssh session). - twice was on "configuring udev". After this, board is almost dead: - boots to anima…
-
Reputation Points
- 11 replies
- 4k views
- 1 follower
-
-
Hello, I am trying to create a custom uboot using armbian. it's possible? I am using the following command but I cannot generate the "uboot.bin" to save it to the spi: ./compile.sh uboot-config BOARD=orangepi5 BRANCH=current BUILD_DESKTOP=no BUILD_MINIMAL=yes BUILD_ONLY=u-boot CONFIGURATION=stable KERNEL_CONFIGURE=no KERNEL_ONLY=no PROGRESS_DISPLAY=plain RELEASE=bookworm UBOOT_ONLY=yes Thank.
-
Reputation Points
- 1 reply
- 3.1k views
- 1 follower
-
-
for some strange reason the content of armbianEnv.txt (rootdev) is not applied in my opi5, if anyone can help me. Thank !!!
-
Reputation Points
- 2 replies
- 3k views
- 1 follower
-
-
Hello everyone I was trying to look for information in the forum but I can't find any topic where this specific issue is discussed. I also looked for help in the omv forum and they told me it was a problem with the distribution, hopefully you can help me. My system running Armbian_24.5.1_Orangepi5-plus_bookworm_vendor_6.1.43_minimal Install OMV, omv extras, i try to configure the compose folders and i get the 500 internal server error, clear cache, update and reboot system but there is no change, a moderator asked me for the log by executing the following command "Your error output is incomplete. What is the output of: sudo omv-salt …
-
Reputation Points
- 1 reply
- 5.8k views
- 1 follower
-
-
Hi all! I have a problem with Armbian images on kernel 5.10.160 (jammy & bookworm Armbian_23.11.1_Orangepi5-plus_***_5.10.160.img) When starting from the SD card the nvme device is not visible root@orangepi5-plus:~# lsblk NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINTS mtdblock0 31:0 0 16M 0 disk mmcblk1 179:0 0 58G 0 disk ├─mmcblk1p1 179:1 0 256M 0 part /boot └─mmcblk1p2 179:2 0 57.1G 0 part /var/log.hdd / mmcblk0 179:32 0 233G 0 disk mmcblk0boot0 179:64 0 4M 1 disk mmcblk0boot1 179:96 0 4M 1 disk zram0 254:0 0 7.7G 0 disk [SWAP] zram1 254:1 …
-
Reputation Points
- 1 reply
- 1.9k views
- 1 follower
-
-
Hi all, Just want to share this issue i came across from my recently purchased OPI5+ 32GB version. I noticed it freezes when transferring .img from micro SD card to eMMC or NVMe drives via the command line. Now the img file are armbian OS and no its not the img file issue. at times I can get it to around 70seconds and it will freeze. hard reboot is required, unable to complete the transfer. I have also tried to reduce the bs=10 speed but still the same. Now i have also got the 16GB version and this works fine with no issues... Good chance there is something wrong with this latest hardware..…
-
Reputation Points
- 61 replies
- 30k views
- 5 followers
-
-
Hi I want to use the I2S GPIO output pins ( 26 pins ) on Orange Pi4 LTS to connect multi channel DAC. Is it possible to overlay some pins?
-
Reputation Points
- 5 replies
- 6.7k views
- 2 followers
-
-
After booting up armbian 23.02.2 on my orange pi 4 LTS, cpu temp goes up to 95 deg celcius when stress testing (no heatsink or fan installed at all) and the device reboots shortly afterwards. I ran `armbianmonitor -m` when stress testing and found out that some of the cores are not throttling. I examined the default trip point settings coming with the image in the file /boot/dtb/rockchip/rk3399-orangepi-4-lts.dtb: trips { cpu_alert0 { temperature = <0x14c08>; hysteresis = <0x7d0>; …
-
Reputation Points
- 7 replies
- 7.6k views
- 1 follower
-
-
Hello folks! I was experimenting with all ARM images (Manjaro, Fedora, Arch, etc) i could find to test with the Orange Pi 4 LTS SBC board, and when i was about to return to armbian, it didnt boot anymore, not even from the SD card flashed with a proper image. I' currently using UART USB to TTL debug device to see whats happening with the board and it returns this: NOTE: [At the moment of this screenshot the board was with a SD card flashed with the default orange pi debian server image] Does anyone know how to reset this board and get it booting again from any ARM images? Would really appreciate any help on this…
-
Seems like the kernel 6.12.16 just does not boot - either updated regularly or from "rolling" minimal image. Steps to reproduce: - 1 way - just burn and run current "rolling" minimal image (Armbian_25.5.0-trunk.115_Orangepi4-lts_plucky_current_6.12.16_minimal). Result: Getting no records on UART after "Starting kernel..." and only red led shining. - 2 way Enabling kernel updates from already up to date Armbian v25.2.2 with older 5.15.76-rockchip64 (`# sudo armbian-config` -> System -> Kernel -> SY201 - Install alternative kernels) Result: same as above - 3 way Enabling kernel updates from older Armbian 22.08.10 without Armbian update itself.…
-
Reputation Points
- 22 replies
- 11k views
- 3 followers
-
-
Hi ChecMate, Just FYI I am seeing the same thing on an Orange Pi 4 LTS that I am setting up, what worked for me was to unplug the keyboard to let the boot start, then plug it in later. I tried 2 keyboards and both USB 2 & 3 ports, and the problem is consistent, if I boot with the kb plugged in the HDMI remains dead. Franck
-
Reputation Points
- 7 replies
- 7.6k views
- 1 follower
-
-
Hi I am wondering if anyone has had any luck using a mini PCIe to SATA adapter with an Orange Pi 4 LTS to attach a SATA hardrive? If yes, which adapter did you use? I would like to throw the OPi 4 LTS and a hard drive in a box and make a mini fanless NAS box. thanks
-
Reputation Points
- 0 replies
- 2.7k views
- 1 follower
-
-
i have 2 sd cards, 32 and 16gb. on every of them i burned ubuntu xfce and debian cli using dd and armbian imager (8 total tries). none worked. board every time booted into Android which locates on 16gb internal eMMC. what should i do? i looked into manual but no luck. i dont have DC to power board while doing maskrom. maybe i can wipe emmc from itself ( boot into android 12 and destroy it)? or i noticed that when i connect board via usb type c to my mac, it still powers on, so maybe i dont even need dc power to get maskrom device? im geniue lost now, i was searching in web for solution past 3 hours
-
Reputation Points
- 4 replies
- 989 views
-
-
Hi all, After a restart and after a few days go by my My Orange Pi 4 LTS randomly loses its ability to make outbound network connections. I can ssh into the box, however for some reason the routing tables are empty: > ping 192.168.1.53 ping: connect: Network is unreachable > netstat -r Kernel IP routing table Destination Gateway Genmask Flags MSS Window irtt Iface The box is connected through an ethernet cable, configured to used DHCP, but I see no IPv4 address in the interface configuration: > ifconfig eth0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500 inet6 2a01:cb15:81c2:e5…
-
Reputation Points
- 0 replies
- 2.7k views
- 1 follower
-
-
Hi all, Testing this OP5, got a standard M2 NVMe SSD (this works on my OP5Plus) I have formatted to exFAT with windows, inserted on the OP5, loaded ArmbianOS on MicroSD, it boots fine but I cant get it to show the nvme drive using fdisk -l or lsblk It seem like its not detecting the m2 nvme ssd at all.. little help please ?
-
Reputation Points
- 12 replies
- 10.8k views
- 1 follower
-
-
Hi, I've been running Armbian legacy server on my 5+ for a month now. I had trouble initially with my EMMC not booting, but I discovered, I had to wipe the SPI Nor then using Armbian config to flash it, then write to EMMC. When a new version of Armbian comes out for the 5+ and it may be a 6.8 kernel build, will I need to re-flash the SPI before I can install the newer version of Armbian (or another image from that's not Armbian?) before updating the EMMC. I found the steps on the Radxa site insightful for a general overview of SPI Nor and flashing (I understand it not an OPi5 x board), but it's not clear to me if a different OS will ne…
-
Reputation Points
- 0 replies
- 3.2k views
-
-
Hi, I have downloaded and tested the 6.12 kernel Minimal/IOT images and they are not booting. I downloaded trixie 6.1, booted, then manually installed latest 6.12 with armbian-config and the reboot failed. I re-flashed sd card with 6.1, installed edge 6.16.4 (latest) with armbian-config and it booted fine.
-
Good day, I have Opi 5 and bought this display https://www.aliexpress.com/item/1005005641383181.html?src=google&aff_fcid=66031a1404104c2cb62a43359c4edcd8-1705719622481-01990-UneMJZVf&aff_fsk=UneMJZVf&aff_platform=aaf&sk=UneMJZVf&aff_trace_key=66031a1404104c2cb62a43359c4edcd8-1705719622481-01990-UneMJZVf&terminal_id=b834b596955b44a1bf643629f5ba5647&afSmartRedirect=y . It was a blind buy ... And now I can't get it work if its even possible. I'm its my first time trying to get display on these boards usually use them trought Monitor or TV and it works flawlessly. Cant find even config.txt . But now im lost at how to get …
-
System Information: https://paste.armbian.com/mozehisomu When i am trying to setup many vlan interfacces i have whis dmesg message: rk_gmac-dwmac fe1c0000.ethernet eth0: MAC_VLAN_Tag_Filter full (size: 4) interface info: ethtool -i eth0 driver: st_gmac version: Jan_2016 firmware-version: expansion-rom-version: bus-info: supports-statistics: yes supports-test: no supports-eeprom-access: no supports-register-dump: yes supports-priv-flags: no I need about 20-30 vlan interfaces
-
Reputation Points
- 16 replies
- 8.3k views
- 4 followers
-
-
Hi Basically the subj sums it up. I got the AP6275P wireless module with Armbian, and BT is not functional. `hcitool dev` doesn't show the device in its output. Neither does `rfkill`. It works with the Ubuntu image published by Orange Pi though, so it doesn't look like a hardware issue. I'm using Armbian 23.5 Jammy Gnome with the 5.10.160 kernel. Happy to provide any additional data.
-
Reputation Points
- 9 replies
- 7.9k views
- 1 follower
-
-
Hi all Armbian fans, As of today, I checked officially platinum supported Armbian version for Orange Pi 5. I was amazed how low performing is armbian image. I was using latest armbian with HW install procedure at: https://redirect.armbian.com/orangepi5/Jammy_legacy_gnome , and Ubuntu from https://github.com/Joshua-Riek/ubuntu-orange-pi5/releases/download/v1.11/ubuntu-22.04-preinstalled-desktop-arm64-orange-pi5.img.xz Both glxinfo -B says: Accelerated : yes Armbian glmark2 Score: 705 Ubuntu glmark2 Score: 1285 Difference is HUGE When we could expect any "normal" Mali…
-
Hello, my Orange Pi 5 works well with the stock OS (1.22, Ubuntu Jammy, BSP kernel 6.1.99), using the SD as a boot device. It also works ok with Armbian Minimal-IoT / Debian 13 / 6.1: v25.8.2 for Orange Pi 5 running Armbian Linux 6.1.115-vendor-rk35xx But I prefer Ubuntu and wanted to try 6.12, so I downloaded 25.8.2 / Ubuntu Server / 6.12. Wrote to SD, hooked up the debug UART and powered on. The bootloader is fine, the kernel starts, but at a certain point it panics: [ OK ] Reached target sockets.target - Socket Units. Starting armbian-hardware-monitor.…ce - Armbian hardware monitoring... …
-
Hello, I have an orange Pi5, i had installed armbian a few years ago and everything was working fine. Roughly one year ago i turn it off and kept off until now. A few days ago I tried to turn it on again and i've inserted a new sd card containing armbian but it doesn't boot. I've re created the sd card a few times and also used another sd card because i was thinking something was wrong with the card. The board turn on but i got only the red led, and is stable. Searching on internet i found that maybe the Orange Pi is bricked, so i tried to use the MaskRom and Recovery button, but nothing happen. Also i'm not able to see the board inside the RKDevTool, neithe…
-
Orange PI 5 doesn't boot after firmware update using ARMBIAN beta tool. There isn't so much documentation, as this board is new. How to recover the firmware?
-
Reputation Points
- 14 replies
- 22.6k views
- 1 follower
-
-
Hi all, I’m new to this whole SBC thing, and I recently got an Orange Pi 5. I first installed the official OS (Ubuntu), where I needed to do into orangepi-config and go into System > Hardware > wifi-ap6275p and enable that to use the official M.2 WiFi dongle. However, I don’t see this option on Armbian. Does it not support it?
-
Reputation Points
- 1 reply
- 2.9k views
- 1 follower
-
-
Hi all, I'm trying to debug a sporadic problem with my Orange Pi 5 (16GB) which I'm unable to reproduce. I'm hoping maybe someone else experienced a similar issue or at least has any pointers on how to debug it further. The problem: At random times of the day, the board just appears to freeze up. All communications stop. Board is powered on, with red LED on and green LED off. I have to manually unplug the device to reset it. Within the last 2 weeks, this happened 3 times already. Each time, the last log appears to be a journalctl flush (example: https://pastebin.com/dDm5Xtis - the board froze at midnight, no more logs until …
-
My orange pi 5 armbian Os isn’t displaying hdmi output to my monitor. However, it works on my flat screen tv, any reason why this might be ?
-
Reputation Points
- 1 reply
- 1.9k views
-
-
Hello All, Do you also have this kind of messages in syslog ? [ 1601.687044] ------------[ cut here ]------------ [ 1601.687070] WARNING: CPU: 2 PID: 112 at drivers/gpu/drm/rockchip/rockchip_drm_vop2.c:2986 vop2_crtc_load_lut+0x54/0x310 [ 1601.687075] Modules linked in: bnep zstd joydev sch_fq_codel fuse ip_tables ipv6 r8152 panfrost gpu_sched [ 1601.687114] CPU: 2 PID: 112 Comm: kworker/u16:1 Tainted: G W 5.10.110-rockchip-rk3588 #trunk.0184 [ 1601.687117] Hardware name: Orange Pi 5 (DT) [ 1601.687127] Workqueue: events_unbound commit_work [ 1601.687134] pstate: 40c00009 (nZcv daif +PAN +UAO -TCO BTYPE=--) [ 1601.68713…
-
orangepi5-max:~:% sudo apt upgrade -y Upgrading: armbian-bsp-cli-orangepi5-max-edge bsdutils fdisk libbz2-1.0 libmysqlclient24 libudisks2-0 linux-u-boot-orangepi5-max-edge rfkill zlib1g-dev armbian-firmware bzip2 gnu-coreutils libfdisk1 libsmartcols1 libuuid1 login udisks2 armbian-plymouth-theme diffutils libattr1 libminizip1t64 libssh-4 linux-dtb-edge-rockchip64 mount util-linux base-files eject …
-
Reputation Points
- 1 reply
- 446 views
- 1 follower
-
-
Hi all, this is my first post here on the forum. I'm getting ready to wrap up for the night, but I recently purchased an Orange Pi 5 (non-B) to do some tinkering with. I downloaded the Bookworm XFCE variant as I am somewhat familiar with XFCE already. Anyway, upon initial testing, I thought my power supply wasn't good enough for the board. I wasn't getting any HDMI output. When I removed the micro-SD card and tried to boot it that way, an orange pi splash screen would show on the attached display, so I think the port actually works (?) I have a spare USB to TTL Serial adapter so I was able to verify the board was successfull…
-
Reputation Points
- 4 replies
- 11.5k views
- 1 follower
-
-
Stable, weekly and CI builds https://www.armbian.com/orangepi-5/
-
Is it possible to use the onboard microphone of Orange Pi 5 on Armbian? It does not seem to turn on
-
Reputation Points
- 4 replies
- 3.6k views
- 2 followers
-
-
I have created a micro desktop case. It's an open design that is still in the creation phase. The shell is 3d printed, the sides are acrylic, and the opi5 mount panel can be 3d printed or made from acrylic. I'm looking for feedback with design suggestions/needs. This is the first real opi5 micro tower design currently for OPI5. My cad drawing of the OPI5 mainboard is 99.9% accurate, so if someone wants to use that as a footprint for other projects by all means. https://github.com/berin-aquaquad/orange-pi-5 I am using DesignSpark Mechanical a free cad software that is on par with Fusion360. The shell has been designed as a split body so smaller 3d printers can c…
-
Reputation Points
- 63 replies
- 30.8k views
- 3 followers
-
-
The OPI5 has an onboard RTC. On the back of the board near the RTC chip there are two pcb "test points". One says RTC1, the other says GRD1, I would assume a CR2032 could be connected to those points to maintain RTC function. I don't dare do anything till I get a solid answer. Can anyone give me any feedback as to options.
-
Orange pi 5 (i dont find way hot to make it in orange pi 5 section) English is not my native, i hope you understand and sorry for mistakes I spend like 3 days on this problem and i think i am stuck I tested offisial image and Josua and there i can use my wifi normally Setup orange pi 5 v1.3.2 clened spi (i got problem like here) armbian 26.5.1 vendor 6.1.115 (from armbian imager on windows) sandisk extreme 64gb sd card after boot i runs sudo apt update sudo apt upgrade -y armbian-config (choose orange pi 5 ap6275p overlay) /boot/armbianEnv.txt verbosity=1 bootlogo=false console=both e…
-
Reputation Points
- 5 replies
- 2.1k views
- 1 follower
-
-
A new variation of Orange Pi 5 is now available. I think it's available on AliExpress, but I've seen the item on Amazon.com as well...reasonable price: https://www.amazon.com/Orange-Pi-Rockchip-Frequency-Development/dp/B0C5BZLPZN It comes now with the RK3588 instead of the RK3588s of the 5 and 5B. It's similar in capabilities of the Rock 5B but I believe has a few more bells and whistles. It has two 2.5GB ethernet ports. Separate connectors than GPIO for RTC and fan. Full size HDMI input as well as 2 full size HDMI outputs. Can have m.2 for 2230 WiFi/BT on top side as well as m.2 2280 on bottom of board. I think it can only go up to 16GB me…
-
Reputation Points
- 42 replies
- 44.3k views
- 9 followers
-
-
After looking at this message from @Seb042 I thought it would be better to open a new topic to discuss this. From what I saw from my install: $ dmesg ... [ 6.166453] iwlwifi 0002:21:00.0: api flags index 2 larger than supported by driver [ 6.166480] iwlwifi 0002:21:00.0: TLV_FW_FSEQ_VERSION: FSEQ Version: 93.8.63.28 [ 6.167021] iwlwifi 0002:21:00.0: loaded firmware version 59.601f3a66.0 ty-a0-gf-a0-59.ucode op_mode iwlmvm [ 6.267334] iwlwifi 0002:21:00.0: Detected Intel(R) Wi-Fi 6 AX210 160MHz, REV=0x420 [ 6.273748] iwlwifi 0002:21:00.0: reporting RF_KILL (radio disabled) [ 6.450150] iwlwifi 0002:21:00.0: WFPM_UMAC_PD_NOTIFIC…
-
Reputation Points
- 7 replies
- 5.5k views
- 1 follower
-
-
Hello, Long time Gentoo and Raspberry Pi user, but I am interested in a more powerful Arm device. Will buy an Orange Pi 5 plus device if it meets my requirements. I am interested about dual or multiple boot: let's say Linux and Android or, at least multiple Linux distro - let's say Armbian and Gentoo. It is possible ? On Raspberry Pi 4 with a larger boot partition I switch content of /boot from boot/debian /boot/gentoo, have multiple partition on SATA SSD connected via USB edit root parameter in /boot/cmdline.txt and that way I choose which distro to boot. On Orange PI 5 (Plus) I read that SPI chip have to be flashed to choose the boot device fro…
-
Reputation Points
- 6 replies
- 15.7k views
- 1 follower
-
-
Installed: Armbian_23.11.1_Orangepi5-plus_bookworm_edge_6.7.0-rc1 The analog device is visible, but there's no sound from the headphone jack. The hdmi device is not visible. aplay -l **** List of PLAYBACK Hardware Devices **** card 0: Analog [Analog], device 0: fe470000.i2s-es8328-hifi-analog es8328-hifi-analog-0 [fe470000.i2s-es8328-hifi-analog es8328-hifi-analog-0] Subdevices: 1/1 Subdevice #0: subdevice #0 There is no sound when I play a test file: aplay -D hw:0,0 /usr/share/sounds/alsa/Noise.wav Playing WAVE '/usr/share/sounds/alsa/Noise.wav' : Signed 16 bit Little Endian, Rate 48000 Hz, Mono apl…
-
Reputation Points
- 4 replies
- 5.3k views
- 2 followers
-
-
Hi, newbie here again.... I recently switched to Armbian from Orange Pi Ubuntu. I am running Armbian 23.8.1 Jammy with Linux 5.10.160-legacy-rk35xx My issue is a noticeable slowdown in NVME performance. I now get 522.35 MB/sec (as per hdparm test), but before on orange pi ubuntu it was around 1900 MB/s . FYI...Armbian is installed on and booting from the NVME. everything else seems to work perfect and I don't get smartctl errors. Please advise - Crucial P3 4TB PCIe M.2 2280 SSD NVMe (PCIe Gen 3 x4) - Have all the latest updates /dev/nvme0n1: Timing cached reads: 7988 MB in 2.0…
-
Reputation Points
- 10 replies
- 13.4k views
- 1 follower
-
-
Board: Orange Pi 5 Plus (RK3588) Armbian image used: Downloaded from https://armbian.cn/boards/orangepi5-plus (Ubuntu 26.04, .img format) Comparison image: Joshua Riek's Ubuntu for Rockchip – https://joshua-riek.github.io/ubuntu-rockchip-download/boards/orangepi-5-plus.html Problem Description I downloaded the Armbian image for Orange Pi 5 Plus from the official Armbian page and flashed it to both a TF card and eMMC. The board fails to boot in either case. However, when I flash Joshua Riek's Ubuntu image using the exact same methods, the board boots successfully without any issues. I have compared the partition layouts of both images and found them to be essenti…
-
Reputation Points
- 3 replies
- 1.2k views
- 1 follower
-
-
I am running Ubuntu 24.04 Noble (Armbian Linux 6.1.115-vendor-rk35xx) and no additional packages affecting VPU performance have been installed; everything is stock. Jellyfin is running in Docker, and transcoding works perfectly, except for some movies. I tried to play a 4K video in Chrome (native HEVC support), set the bitrate to 40mbps, and the video played normally at a transcoding speed of about 3x, but after a while, Orange Pi crashed. In Firefox inside neko (where there is no hardware acceleration and HEVC), the crash happened even faster, after ~2 seconds of playback. The crash happens as if the board loses power: journalctl is not saved, nothing is …
-
Reputation Points
- 3 replies
- 3.7k views
- 1 follower
-
-
Hi can anyone advise if they have come accross this issue. so somehow HDMIRX seems to be the hdmi input controller starts to freak out for no reason there is nothing plugged into it EVER and will randomly start to outpur this to console im thinking maybe the HDMIRX is faulty and want to remove it, I have tried removing it removed the DTB , decompiled and edited and removed it from DTB, tied to blacklist it but with no effect it does not stop spamming and the device [ 89.603095] rk_hdmirx fdee0000.hdmirx-controller: hdmirx_phy_register_write wait cr write done failed! [ 89.613765] rk_hdmirx fdee0000.hdmirx-controller: hdmirx_phy_register_write wa…
-
Reputation Points
- 1 reply
- 2.5k views
- 1 follower
-
-
Hello, I am using Armbian 23.8.2 Jammy for Orange Pi 5 PLus and it cannot diplay 4K via HDMI. How to enable/switch this on?
-
I made a configuration via armbian-config, but the camera does not work, here are the messages /sys/bus/i2c/drivers/ov13855 3-0036 bind uevent unbind sudo i2cdetect -y 3 0 1 2 3 4 5 6 7 8 9 a b c d e f 00: -- -- -- -- UU -- -- -- 10: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 20: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 30: -- -- -- -- -- -- UU -- -- -- -- -- -- -- -- -- 40: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 50: -- -- -- -- -- -- -- -- 58 -- -- -- -- -- -- -- 60: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 70: -- -- -- -- -- -- -- -- …
-
I have some problem starting Linux image with my OPi 5+. I just got an OPi 5+ 16Gb RAM no eMMC. I flashed official Android image into SD card with SDDiskTool following the instruction in wiki. It worked. Then I do the "Data Reset" in Android Settings. The board doesn't boot anymore. I re-flashed Android into the SD, and it worked again. Then, I want to try Linux. I flashed Joshua Riek ubuntu-22.04.3-preinstalled-desktop-arm64-orangepi-5-plus.img.xz into the same SD with balenaEtcher. It doesn't boot. I tried again with Armbian_24.2.1_Orangepi5_jammy_legacy_5.10.160_gnome-amazingfated_desktop.img.xz and official Ubuntu image as well. None of them ma…
-
Hi, my orange pi 5 plus cant boot armbian, its hang and screen goes flicker, im currently not been able to boot android images to (its hang and flicker to),, i cant boot armbian and android version.. but other linux is normally booting fine.. any advise?
-
Reputation Points
- 2 replies
- 3.3k views
- 1 follower
-
-
I received my new orange pi 5 plus. I installed the official Orange PI 5 Plus Ubuntu on a SD card and it worked great. Then I installed the "Armbian_23.8.1_Orangepi5-plus_jammy_legacy_5.10.160_gnome_desktop" on SD card (Yes I took the image from the page with the "archive for orange Pi 5 plus"), and it get stuck on a screen displaying "Orange PI" (I do not see any armbian logo) , and nothing else happens (the blue light on the board does not blink). Why is that? How can I see what is happening? I installed in the past Armbian on an Orange Pi 5 with no issue, so I am really wondering what is going on there. Your view/ideas w…
-
I'm running armbian 23.08 bookworm on an orange pi 5 plus. I'm trying to run VMs that boot with UEFI, but these are hanging. I suspect a bug in the vendor kernel (5.10.160-rk35xx), since this works fine on an AWS bare metal arm64 host. Example: ``` $ sudo apt install qemu-system qemu-efi-aarch64 ... $ cp /usr/share/AAVMF/AAVMF_VARS.fd ./aavmf_efivars.fd $ qemu-system-aarch64 \ -machine virt \ -cpu max \ -drive if=pflash,unit=0,format=raw,readonly=on,file=/usr/share/AAVMF/AAVMF_CODE.fd \ -drive file=aavmf_efivars.fd,format=raw,if=pflash -net none \ -nographic \ -enable-kvm …
-
Reputation Points
- 2 replies
- 4.2k views
- 1 follower
-
-
It was found that 3.5mm jack has issue with using headset. Speakers are work good on my "uname -a Linux orangepi5-plus 6.19.0-rc5-edge-rockchip64 #1 SMP PREEMPT Mon Jan 12 03:03:14 UTC 2026 aarch64 aarch64 aarch64 GNU/Linux" system but micro is silent. By debugging it was found that register 0x2b(43) "DAC Control 21" has difference between actually used es8388 on OP5+ and original driver's IC es8328. Also microphone bias was never activated by bits 2,3 in register 0x03. I create patch and now microphone work properly. I don't know how to properly share this patch so I will attache it here. orangepi-5-plus_ES8388_Microphone.patch
-
Reputation Points
- 2 replies
- 1.8k views
- 1 follower
-
-
After enabling the rk3588-hdmirx overlay in armbian-config device tree overlays, whenever I boot, I am greeted with multiple hdmirx (fdee0000.hdmirx-controller: hdmirx_wait_lock_and_get_timing HDMI pull out, return!) errors on boot. On a previous install, the hdmirx errors would block the entire boot process and it would just hang forever. I do not know the exact cause, but the issues seemed to arise after I ran this command to disable the X Display Server "systemctl set-default multi-user.target". The errors could only be resolved if I plugged in the sd card into another device and removed rk3588-hdmirx from overlays in /boot/armbianEnv.txt . …
-
Reputation Points
- 3 replies
- 2.8k views
- 1 follower
-
-
Any guidance on getting the native 2-pin fan connector and control working with Armbian Jammy? e.g. using pwm-fan driver to control the fan. Thanks for any help, please be kind, I'm a newbie 🙂
-
Reputation Points
- 2 replies
- 6.8k views
- 1 follower
-
-
Hello! Can anyone comment whether PCIE Passthrough is even theoretically possible on an Orange Pi 5+? Or should I just cease and desist? #1) The hardware seems to be there #2) IOMMU seems to be working at least for platform/PHP devices #3) VFIO looks to be on #4) no cigar The missing piece looks to be MMU600_PCIE support, as non-platform devices don't seem to be getting assigned iommu groups? --- #1 "There are two MMU600 instances in RK3588, MMU600_PCIE and MMU600_PHP respectively " https://github.com/FanX-Tek/rk3588-TRM-and-Datasheet/blob/master/Rockchip RK3588 TRM V1.0-Part1-20220309.pdf #2 root@oppa:~…
-
Hello, I've been using https://joshua-riek.github.io/ubuntu-rockchip-download/boards/orangepi-5-plus.html with a custom kernel that I built to activate my TPM2.0 device and it works. Now I'm asked to use an UEFI compatible image with my Orange Pi 5 Plus. So what I did is more or less the same thing that in here But instead of the legacy kernel I used the 6.1.115-rockchip-vendor-rk35xx kernel and my device booted, I got an HDMI output, etc. And then I updated it to my custom kernel (6.1.0-1027-rockchip) that has the necessary configurations to allow TPM over SPI. Now I'm trying to activate my TPM2.0 as I did before. To do th…
-
Continuing the tradition (1, 2) of micro-optimizations for single-board computers that come into my hands. This time I optimized or rather fixed the wake-up function via USB/WoL/WWoL on the Orange Pi 5 Plus. Also got the WiFi adapter RTW8852BE/RTW8852CE working (at least those are the ones I tested). I tested exclusively on the Vendor 6.1.x kernel since the main wake-up features via USB/PCIE/GPIO1-GPIO4 only work in it. I don't currently have the ability to test the new current kernel and I doubt that Power Management will work fully there. Armbian for Orange Pi 5 Plus from the official website, Vendor kernel (kernel 6.1.115-vendor-rk35xx), what does…
-
My Orange Pi 5 appears to be completely dead. No lights turn on when the power is connected and the SD card is freshly imaged as well. This started happening when I connected a USB-C multi-port dongle with a connected PD power supply to it. Is it possible to revive this?
-
Reputation Points
- 7 replies
- 8.7k views
-
-
/boot/armbianEnv.txt rebooting pwm all display working fine
-
Reputation Points
- 4 replies
- 9.1k views
-
-
-
Expected Behavior: I am able to enter sleep mode, either graphically or using systemctl suspend, and then wake from sleep mode by typing on the keyboard or pressing the power button Current Behavior: The system appears to enter sleep fine, but once in sleep pressing the power button or pressing buttons on the keyboard seems to do nothing (pressing keys on my keyboard causes it to light up, however my mouse does not light up). The display remains blank and the green led does not blink. I have to do a forced shutdown by holding the power button or unplugging the power supply. Note: the behavior is the same no matter if I suspend from a desktop sessio…
-
Reputation Points
- 12 replies
- 9.3k views
-
-
Hello, I have a problem with mounting a USB HD via fstab. If I enter the HD in the fstab, the system hangs when booting. The problem, USB is not activated yet and will be loaded later. If I remove the HD from fstab, it is automatically mounted under /run/media/USER. However, this must not be mounted under a user, but should be mounted as root. What can I do. Thanks very much
-
Hi I want to work with g_audio drivers on the usb type c otg port. When I build the image with current kernel, by applying the following overlay (I only change dr_mode to peripheral) i am able to convert the usb port in peripheral mode and successfully load the g_audio drivers and audio interfaces also come up. /dts-v1/; /plugin/; / { compatible = "rockchip,rk3588s"; fragment@0 { target = <&usb_host0_xhci>; // This matches the label in the device tree __overlay__ { dr_mode = "peripheral"; }; }; }; But when i want to do similar with the vendor kernel, which has different device tree, c…
-
Reputation Points
- 1 reply
- 5.4k views
-
-
Hi, Armbian_23.02.2_Orangepi5_jammy_legacy_5.10.110 works well with my OPI5. I can ssh to and play with it from my Debian desktop. I don't have HDMI monitor so I want to try serial port. i'm using USB-TTL cable to connect OPI5 to my Debian box. Then in Debian bash I use this command to connect to the port screen /dev/ttyUSB0 Then power on the OPI5. The output is garbled: If i change it to cs7 (screen /dev/ttyUSB0 cs7), the output is still something I cannot understand: The stty command and output: $ sudo stty --file=/dev/ttyUSB0 --all speed 9600 baud; rows 0; columns 0; line = 0; intr = ^C; quit = ^\; erase = ^?; kill = ^U; e…
-
Reputation Points
- 15 replies
- 11.9k views
- 1 follower
-
-
My Orange Pi 5 with latest debian does not reboot. I use it faceless (without local screen) via RDP (LAN) from Windows, works fine. But I cannot reboot. Neither via RDP nor via SSH. The green LED stops blinking, the red LED continues. But no LAN access. Must do hard reset via button or power off/on. Any ideas?
-
Hi. Great work with Armbian. Any good advice setting up Wayland and pipewire (for OBS studio) on the Orange pi 5 (23.02 jammy gnome)? I did manage to install both pipewire+pipewire-media-session+pipewire-pulse+related qt5 Wayland package and setting up QT_QPA_PLATFORM=wayland environment variable. But no luck.
-
Hi guys, First post here, I successfully managed to flash and boot Armbian 25.8.2 (Bookworm Minimal) from an SD card. Everything was working great, HDMI output and network included. I then ran “sudo armbian-install” and selected Option 4 to move the system to my NVMe SSD and make it boot from there. The process itself completed without errors. However, after shutting down and removing the SD card and powering on again the system doesn’t boot. I have the red LED turned on however the green LED that was previously flickering doesn’t turn on. There’s also no HDMI output and the board doesn’t connect to the network. I tried ins…
-
Reputation Points
- 16 replies
- 6.6k views
- 1 follower
-
-
Hey, I'm experiencing graphics failures, accelerated decoding problems, flickering window decorations and shell hangups in Plasma. All events are associated with syslog entries: dma-pl330 fea30000.dma-controller: pl330_submit_req:1738 Try increasing mcbufsz (258/256) dma-pl330 fea30000.dma-controller: fill_queue:2264 Bad Desc(2) I've attached the whole system log in case someone is interested. Running Armbian 23.02.2 Jammy Linux orange 5.10.110-rockchip-rk3588 #23.02.2 SMP Fri Feb 17 23:59:20 UTC 2023 aarch64 Panfrost-mesa updated to HEAD. A very similar problem occurs with Orange Pi 5 Debian ready distro images, but …
-
Reputation Points
- 5 replies
- 4.2k views
-
-
Greetings, I have an Orange Pi 5 with the edk2 1.1 UEFI bios on the SPI, and an NVMe installed. The BIOS has been set to "Mainline" in the device tree option I tried visiting here https://armbian.com/boards/uefi-arm64 and burning the minimal current6.18.8 CLI image to my USB stick. The Orange Pi 5 displays the graphical grub menu with no problems, complete with penguin in the background etc, but once I choose the boot Armbian option, it displays a few lines of terminal output and then the monitor goes black as if the GPU is initializing and a desktop or graphic would be about to show - when instead, the monitor just reports no signal instead. The system isn't…
-
Reputation Points
- 1 reply
- 1.3k views
- 1 follower
-
-
playing around with armbian-config after switiching to vendor kernel - missing "toogle hardware configuration" Left is on (previous legacy vendor) kernel with "24.5.1 and right is legacy kernel with "24.2.1"" Just curious if anyone know why that is? Perhaps I should have taken other steps when switching to vendor kernel(I have rebooted and confirmed it is running vendor kernel prior to screenshot)
-
Reputation Points
- 0 replies
- 1.7k views
-
-
EDIT: I am using the Armbian 23.5.5 Orange Pi 5 Plus Jammy Legacy 5.10.160 Gnome Desktop image Let me preface this with I am a Linux noob and this is one step below black magic voodoo to me. For some reason my Orange Pi 5 Plus USB 3.0 ports are no longer functioning. I setup my OPi at my testing station and everything was working fine (except I couldn't get my WiFi dongle to work but that's a different post) After I turned off my Orange Pi 5 Plus, disconnected it and set it back up where it was going to be staged now the USB 3.0 ports no longer function. Putting in the "lsusb" command shows all my ports, including the non-f…
-
Hello all! In Orange Pi OS latest image all works well EXCEPT it keeps launching apps in a stupid bordered window that has a huge obnoxious bar at the top with 2 absolutely useless buttons, a window to full screen option and the X button How do I hide this stupid thing? It's blocking the whole top of my screen and cutting off part of my TiviMate Pic here https://imgur.com/a/8uo8WrM
-
Reputation Points
- 2 replies
- 2.1k views
- 1 follower
-
-
Hello, i just bought new display from orangepi. But i have problem get it work with armbian 23 jally with kernel 5.15. I try get files from orange pi os with no success. Does somebody have working dts for this type of display ? Orange Pi RK3399 10.1inch LCD Touch Screen & Display Panel screen - OP1102 DTS
-
Have anyone experience with 3rd party module connection with SPI to Opi5? I'm running Linux orangepi5 5.10.110-rockchip-rk3588 #23.02.2 SMP. I add spidev device using armbian-config (opi-spi4-m0-cs1-spidev) verbosity=1 bootlogo=false overlay_prefix=rockchip-rk3588 fdtfile=rockchip/rk3588s-orangepi-5.dtb rootdev=UUID=6fc3824e-c6c2-4781-8807-20e5a4bfc432 rootfstype=ext4 overlays=opi5-spi4-m0-cs1-spidev Two devices appears - crwxrw-rw- 1 root root 153, 0 Apr 17 10:55 /dev/spidev4.0 crwxrw-rw- 1 root root 153, 1 Apr 17 10:55 /dev/spidev4.1 Internal loopback test with spidev_test works w/o problem if I put wire MOSI <-> MISO. …
-
Hello Armbian forum, I need to have a GPIO interrupt on Orange PI5. I have successfully installed WiringOP and I am using it with C code. The problem is that the interrupt is not working, and I am receiving the following error. How can I proceed? Does anyone know how to enable the WiringOP interrupt on the GPIO PIN? Code C : #define AUX 13 wiringPiISR(AUX, INT_EDGE_FALLING, &MyFunction); Error: wiringPiISR: unable to open /sys/class/gpio/gpio92/value: No such file or directory PS. I have just successfully installed this version: Armbian 23.02 Jammy Gnome
-
Reputation Points
- 7 replies
- 4.5k views
- 1 follower
-
-
I have an Orange Pi 5 (16GB RAM) running Armbian Jammy with the latest updates installed. I am booting from NVMe and when it boots successfully it runs flawlessly without issue. The problem occurs when I reboot -- the majority of the time it does not boot up successfully. Sometimes when it boots I only see the red light (and no green light), and other times I will see the green light flash like normal, yet the external hard drive does not spin up or mount properly. This results in me needing to power down the Orange Pi 5 and try again. Eventually it will boot up successfully (along with the external HDD) and then everything is good; that is, until the next time I have to …
-
Reputation Points
- 12 replies
- 8.5k views
- 1 follower
-
-
hello! Can help me about orange 3b, I want to adapt one dts file to my board, how to correctly indicate the names of the pins, the example gives the following sample entry: https://mjmwired.net/kernel/Documentation/devicetree/bindings/display/panel/sitronix,st7701.txt reset-gpios = <&pio 3 24 GPIO_ACTIVE_HIGH>; /* LCD-RST: PD24 */ how to correctly fix this for my board?
-
Reputation Points
- 5 replies
- 3.7k views
- 1 follower
-
-
I installed the image on the SD card put the games in the roms folder correctly. I don't know why I have no sound in games. put it on two different smart tv's and both are without audio in games. Has anyone here experienced this and know how to solve it?
-
With the prior image and kernel 5.10.110 I was able to run compile.sh and produce the linux-source-legacy-rockchip-rk3588_23.02.0-trunk_all.deb which provided the kernel source in /usr/src/linux-source-5.10.110-rockchip-rk3588.tar.xz. I downloaded the latest img which provides kernel 5.10.160 which booted fine. However, running the same compile.sh process I used previously with success produced the older deb package that contains the 5.10.110 kernel source. There were a couple of errors displayed. My compile.sh command is: ./compile.sh BOARD=orangepi5 BRANCH=legacy BUILD_ONLY=kernel RELEASE=jammy KERNEL_CONFIGURE=no The first error encountered was …
-
I want to share some information about an issue that I see on my OPi5+. Since I got it I am messing around with it and everything works great so far with the edge 6.7 kernel. One thing I noticed though was, that right after installation with nothing connected and when idle, there was one kernel process that was constantly consuming around 10% CPU time and the load stays at 1. The process was irq/136-hym8563. The number varies of course after each boot. Kernel driver is rtc_hym8563. Since it is build into the kernel I was not able to unload it as a first test. Side node, the issue is not seen on the Rock5b, so it seems OPi5+ hardware specific. Even if bot…
-
Hello. The official adapter does not work for my orange pi 5 plus. https://aliexpress.ru/item/1005005956334270.html?spm=a2g2w.orderdetail.0.0.4e224aa6r3APff&sku_id=12000035019805399 The problem is this. Wi-Fi works, you turn on bluetooth, bluetooth doesn’t work initially. After turning on bluetooth, Wi-Fi does not work and bluetooth does not work either. Realtek RTL8852BE-CG BE CPU work in all officials builds. Help me please
-
Reputation Points
- 9 replies
- 11.3k views
- 3 followers
-
-
Hi folks, Ran into some issues with July 6 bookworm images for Orange Pi 5 Plus - it boots but there is no video or network. Orange Pi 5B has a note to change the dtb - one is also needed for the 5 Plus. It should be `fdtfile=rockchip/rk3588-orangepi-5-plus.dtb`. (I tried to search for related issues, but the rate limit is stopped me so I gave up.)
-
the issue is as follows: 1. When using the Type-C interface to connect to an external monitor, the display works normally if the monitor is connected after the development board has started. 2. If the monitor is disconnected and then reconnected after approximately several hours (possibly more than 6 hours), the display fails to show any image. I used the `armbianmonitor -u` command, and it output the following URL. https://paste.armbian.com/foyecusoju If the Type-C interface is functioning normally, the latest output from `dmesg -w` would show the following: [ 1155.922647] xhci-hcd xhci-hcd.15.auto: xHCI Host Controller [ 1155.922692]…
-
Reputation Points
- 1 reply
- 2.9k views
- 1 follower
-
-
Hello! First time poster, long time admirer. I've been unable to get ANY of the 6.10.x images to boot off SD card (Sandisk Extreme) for the Orange Pi 5 Plus. Specific images which are not working for me: Armbian_24.8.0-trunk.472_Orangepi5-plus_noble_edge_6.10.2_gnome-kisak_desktop.img.xz Armbian_24.5.5_Orangepi5-plus_noble_edge_6.10.1_gnome-kisak_desktop.img.xz Armbian_24.8.0-trunk.472_Orangepi5-plus_trixie_edge_6.10.2_minimal.img.xz Has anybody else had better luck?
-
Hello, I am running Armbian 23.05 "minimal" (with the provided kernel 5.10.110) on my OrangePI 5 4GB. Upgraded all packets to latest. When trying to run GeekBench 5.5.1 ARM Preview, it reboots when approaching the end of multicore tests, with "performance" governor and default speed range (0.4 - 2.4 GHz for A76). Same goes if I drop the max clock speed to 2.2 for A76. After dropping to 2.0 GHz max, it runs fine; but this hurts performances quite a bit. I tried various power sources, including a bench PSU which can reliably supply up to 30A (but I only see a few spikes over 2A). The board has a large heatsink installed wit…
-
root@orangepi5:~# lsblk NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINTS sda 8:0 0 223.6G 0 disk ├─sda1 8:1 0 256M 0 part /boot └─sda2 8:2 0 221.1G 0 part /var/log.hdd / mtdblock0 31:0 0 16M 0 disk mmcblk1 179:0 0 29.8G 0 disk ├─mmcblk1p1 179:1 0 256M 0 part └─mmcblk1p2 179:2 0 29.2G 0 part zram0 254:0 0 7.7G 0 disk [SWAP] zram1 254:1 0 50M 0 disk /var/log root@orangepi5:~# cat /boot/armbianEnv.txt verbosity=1 bootlogo=false overlay_prefix=rockchip-rk3588 overlays=orangepi-5-sata fdtfile=rockchip/rk3588s-orangepi-5.dtb r…
-
I don't work with this board often, because it has been so stable, so I am less familiar with the boot process. I rebooted it today, and realized that it wouldn't post. I found a UART cable and grabbed this log. Can anyone point me to somewhere for it? Or would it be "easier" to just reflash the sd card? DDR V1.11 f1474cf52f cym 23/05/09-11:02:36 LPDDR4X, 2112MHz channel[0] BW=16 Col=10 Bk=8 CS0 Row=17 CS1 Row=17 CS=2 Die BW=8 Size=4096MB channel[1] BW=16 Col=10 Bk=8 CS0 Row=17 CS1 Row=17 CS=2 Die BW=8 Size=4096MB channel[2] BW=16 Col=10 Bk=8 CS0 Row=17 CS1 Row=17 CS=2 Die BW=8 Size=4096MB channel[3] BW=16 Col=10 Bk=8 CS0 Row=17 CS1 Row=17 CS=2 Die BW=8 Size=4096M…
-
Reputation Points
- 9 replies
- 8.5k views
- 1 follower
-
-
If someone is interested can easy setup OledStats for OrangePi5 and SSD1306 Hardware: Orangepi5 SSD1306 OLED display Software Armbian Jammy KDE Neon 6.1.43 Files attached in ZIP archive device.py PixelOperator.ttf setup.py stats.py How to: 1) add overlay wget https://raw.githubusercontent.com/orangepi-xunlong/linux-orangepi/orange-pi-5.10-rk3588/arch/arm64/boot/dts/rockchip/overlay/rk3588-i2c5-m3.dts sudo armbian-add-overlay rk3588-i2c5-m3.dts reboot 2) connect OLED display to I2C5 M3 Pins SDA + SCL (pins 1(VCC),2(SDA),3(SCL) and 5(GND)) check connection sudo i2cdetect -y 5 must be detected 3c value …
-
Reputation Points
- 9 replies
- 5.9k views
-
-
I've noticed a funny thing on 23.11.0-trunk.244, trixie edge. If I use netplan to change the names of the network interfaces, they disappear on the next reboot - linux no longer detects them at all. dmesg will show: ``` rockchip-dw-pcie a40c00000.pcie: Phy link never came up rockchip-dw-pcie a41000000.pcie: Phy link never came up ``` The interfaces will disappear from lspci. Any hint on what's causing this?
-
Reputation Points
- 1 reply
- 2.1k views
- 1 follower
-
(Phone).thumb.jpg.f60309bb32d95d32f028a6642a35c6ea.jpg)
