Rockchip

I have tried to activate CANBUS using "armbian-config", but it does not appear in /dev/, neither with i2c

• 0

  Reputation Points

• 8 replies
• 10.6k views
• 1 follower

john antillanca

March 20, 20233 yr

Edge kernel 7.3.0-rc6 Makes board unstable [ 1173.843180] rockchip-dw-pcie 3c0800000.pcie: PCIe Gen.3 x2 link up [ 1173.971258] pcieport 0002:20:00.0: Root Port has been reset [ 1173.971328] nvme nvme0: restart after slot reset [ 1173.982877] nvme nvme0: D3 entry latency set to 8 seconds [ 1173.994210] nvme nvme0: 4/0/0 default/read/poll queues [ 1173.994642] pcieport 0002:20:00.0: AER: device recovery successful [ 1173.994719] pcieport 0002:20:00.0: Recovering Root Port due to Link Down [ 1173.994761] nvme nvme0: frozen state error detected, reset controller [ 1174.028524] phy phy-fe8c0000.phy.7: lane number 0, val 1 [ 1174.343104] rock…

• 0

  Reputation Points

• 8 replies
• 610 views

MaxT

Thursday at 05:20 PM4 days

I wanted to share 2 custom overlays I've created and tested for the RockPi E to enable UART1 and OTG via the GPIO. Create file rockchip-uart1.dts /dts-v1/; / { compatible = "rockchip,rk3328"; fragment@0 { target-path = "/serial@ff120000"; __overlay__ { pinctrl-0 = < 0x23 >; status = "okay"; }; }; }; Create file rockchip-otg.dts /dts-v1/; / { compatible = "rockchip,rk3328"; fragment@0 { target-path = "/usb@ff580000"; __overlay__ { dr_mode = "otg"; }; }; }; Install and enable overlays: sudo armbian-add-overlay rockchip-uart1.dts sudo armbian-add-overlay rockchip-otg.dts

• 1

  Reputation Points

• 8 replies
• 9.1k views

ich777

March 12, 20242 yr

Hi friends, back to the Gnome version which works incredibly well It works so well that I put my big desktop tower away and have been getting by strictly on this Armbian Gnome environment. I will be donating to Armbian soon However, I am curious, does anybody know how to fix the resume from suspend? For me, the computer goes into suspend mode just fine, but when I tap a keyboard key, the LED's will light on the keyboard indicating they have power, but the system never comes back. If I press the power button on the Orange Pi 5 itself, the system resumes perfectly -- no crashes, everything works as intended I just need it to …

• 0

  Reputation Points

• 8 replies
• 3.6k views
• 1 follower

snow

August 20, 20251 yr

Dear all, I'm looking for help on having RFCOMM TTY working on a Tinker Board S. Any help will be welcome !! Using : Ubuntu Bionic with Armbian Linux 4.19.69-rockchip # uname -a Linux astrotinker 4.19.69-rockchip #5.95 SMP PREEMPT Mon Sep 2 07:34:36 CEST 2019 armv7l armv7l armv7l GNU/Linux I'm trying to have rfcomm tty working with a bt HC-05 dongle, but RFCOMM TTY seems not to be available. The BT HC-05 is well reconized and connected: # bluetoothctl [NEW] Controller 80:C5:F2:46:E2:C2 astrotinker [default] [NEW] Device 00:14:03:06:04:ED HC-05_TIC Agent registered # systemctl restart bluetooth.service # …

• 0

  Reputation Points

• 8 replies
• 7k views
• 1 follower

FranckM

December 19, 20196 yr

I have a brand new Tinker Board S with the latest Armbian buster installed. I have hostapd set up for the board to be a WiFi access point. I can see the SSID on my Windows and mobile devices but when I connect, hostapd tells me an error code 8 and that the device is disassociated. I don't think this is the issue as the kernel panics at exactly the same time. Here is the output from dmesg: [ 101.279674] ------------[ cut here ]------------ [ 101.284852] kernel BUG at mm/slub.c:4117! [ 101.289337] Internal error: Oops - BUG: 0 [#1] PREEMPT SMP ARM [ 101.295860] Modules linked in: fuse rtc_ds1307 xt_state xt_conntrack nft_counter nft_chain_nat xt_MASQUERADE n…

• 0

  Reputation Points

• 8 replies
• 7.2k views
• 1 follower

Igor

March 29, 20215 yr

Hello everyone! I was struggling to make wiring work on OrangePi 5 Plus armbian. Tried everything and came up with a solution that worked for me. I was constantly getting these errors: wiringPiSetup: mmap (PWM) failed: Operation not permitted wiringPiSetup: mmap (GPIO) failed: Operation not permitted I'm on 23.8.2. 1. Install armbian and update apt sudo apt update 2. As stated in OrangePi5Plus wiki page I got .deb installer for wiringPi on OrangePi Now here's the link to this file: https://github.com/orangepi-xunlong/orangepi-build/blob/next/external/cache/debs/arm64/wiringpi_2.51.deb 3. The mos…

• 0

  Reputation Points

• 8 replies
• 16.8k views
• 2 followers

eselarm

November 6, 2025Nov 6

I finally successfully got Armbian installed on my Pinebook Pro's eMMC. That should be giving it its best possible performance. I thought you may all be interested in compiling a list of games that work at least reasonably well on it given its restrictions of being ARM64 architecture, 1.8GHz CPU & 4GBs RAM. So to start here is a list of the ones I currently have on mine. I may try more later but for now I'm limited by the stock 64GB eMMC that the PCP came with... 0AD - 3D RTS Cave Story - Pixel Art Metroidvania Dr Robotnik's Ring Racers - Kart Racer Dune Legacy - RTS Endless Sky - Space Sandbox Flare - Fantasy RPG Freeciv - St…

• 0

  Reputation Points

• 8 replies
• 2.9k views

Bruno Piras

June 17Jun 17

Just got my new tinkerboard powered up with armbian. For some reason I could not get anything after build 1.3 off the Asus site to boot! Anway, first impressions good, however in the graphics settings it seems to max out at 1920 x 1080 whilst on paper the tinkerboard is supposed to support 4k. I'll admit I am new to linux so perhaps i'm missing something ovbious, but if someone could explain how I can up the resolution to 3,840 x 2,160 that would be great. For the avoidance of doubt I have it connected to an Acer 27" 4k monitor.

• 1

  Reputation Points

• 8 replies
• 8.8k views

zador.blood.stained

August 4, 20179 yr

Hello, after a short break, wants to continue with the Tinkerboard. :) I use Armbian-Stretch with the kernel-4.4.126. I want to connect an IR receiver to a GPIO port and use it with the lircd tool. What possibilities does Armbian-Stretch offer me here? Thank you very much. Clash

• 1

  Reputation Points

• 7 replies
• 9.6k views
• 2 followers

jock

June 13, 20188 yr

After last apt upgrade (v21.05.4), lightdm on a RockPro64 does not start anymore. rockpro64:~:# systemctl status lightdm.service ● lightdm.service - Light Display Manager Loaded: loaded (/lib/systemd/system/lightdm.service; indirect; vendor preset: enabled) Active: failed (Result: exit-code) since Sun 2021-06-20 16:13:01 CEST; 21min ago Docs: manlightdm(1) Process: 1877 ExecStartPre=/bin/sh -c [ "$(basename $(cat /etc/X11/default-display-manager 2>/dev/null))" = "lightdm" ] (code=exited, status=0/SUCCESS) Process: 1880 ExecStart=/usr/sbin/lightdm (code=exited, status=1/FAILURE) Main PID: 1880 (code=exited, status=1/FAILURE) Ju…

• 1

  Reputation Points

• 7 replies
• 13.1k views

jrullan

July 23, 20215 yr

Hiya, I am currently trying to setup some ROCK 5B boards as runners and as I install the latest Ubuntu 24.04 (Noble) from here https://www.armbian.com/rock-5b/ it seems to get to where I configure my user etc, then on the next boot it gets stuck at kernal. So I guess before I go through trial and error , is there a recognised most stable build that can be relaibly flashed people would recommend, I found the Rock provided Debian and KDE Plasma to be very buggy and just kept locking up on me so something with Gnome would be cool for now , but will probably move to headless much further down the line. Amazing community reading the messages so far so thank y…

• 0

  Reputation Points

• 7 replies
• 6.3k views

eselarm

December 25, 2025Dec 25

In March 2023 I bought an OPI5 and immediately went for armbian, but I had problems and reported it in the link in this POST. in 2024: I bought the SD cards and other power supply directly from the manufacturers to see if the OPI5 works. I downloaded and burned the latest stable version of Bookworm and the results were the same, errors and everything froze. Before throwing OPI5 in the trash, I downloaded "nightly builds (unstable)" and installed it on an nvme and... it works without problems, I've had no problems for 13 days. In conclusion, the SD card reader is damaged and I can only use the NVME. HELP: I ask you for help with the command (.…

• 1

  Reputation Points

• 7 replies
• 3.2k views
• 1 follower

SteeMan

April 26, 20242 yr

Hi ChecMate, Just FYI I am seeing the same thing on an Orange Pi 4 LTS that I am setting up, what worked for me was to unplug the keyboard to let the boot start, then plug it in later. I tried 2 keyboards and both USB 2 & 3 ports, and the problem is consistent, if I boot with the kb plugged in the HDMI remains dead. Franck

• 1

  Reputation Points

• 7 replies
• 7.6k views
• 1 follower

Dopler

December 22, 20223 yr

I try to install the package rtl8812au-dkms and it fails with: CC [M] /var/lib/dkms/rtl8812au/4.3.8.12175.20140902+dfsg/build/core/rtw_beamforming.o CC [M] /var/lib/dkms/rtl8812au/4.3.8.12175.20140902+dfsg/build/core/rtw_odm.o CC [M] /var/lib/dkms/rtl8812au/4.3.8.12175.20140902+dfsg/build/core/efuse/rtw_efuse.o CC [M] /var/lib/dkms/rtl8812au/4.3.8.12175.20140902+dfsg/build/os_dep/osdep_service.o /var/lib/dkms/rtl8812au/4.3.8.12175.20140902+dfsg/build/os_dep/osdep_service.c: In function ‘rtw_change_ifname’: /var/lib/dkms/rtl8812au/4.3.8.12175.20140902+dfsg/build/os_dep/osdep_service.c:2183:28: warning: passing argument 1 of ‘_rtw_memcpy’ discar…

• 0

  Reputation Points

• 7 replies
• 9.4k views

Igor

January 5, 20233 yr

I'm trying to setup LIRC on my OPI5 but I can't find any details on how that would be possible. I checked the kernel configuration and I cannot see any references to LIRC either. The module list has nothing obvious - is this feature completely disabled? Any suggested alternatives?

• 1

  Reputation Points

• 7 replies
• 3.8k views
• 1 follower

royk

February 6, 20233 yr

Hello, I'm planning on running a k3s cluster with Rook storage with a few of the Orange Pi 5 that I got. A prerequisite for rook however is RBD module. I've been able to recompile the kernel including RBD support, however I've been unable to get the device to boot from the new kernel. Rebooting after kernel has been built and installed still reports Linux 5.10.110-rockchip-rk3588. Any help would be appreciated. I've since wiped the boxes clean and have a fresh install booting from SSD with the OS installed on the NVMe attached so I will be able to provide any information required. Thanks!

• 0

  Reputation Points

• 7 replies
• 5k views
• 2 followers

javierin

May 23, 20233 yr

Hi everyone!👋 I would like to turn off the leds on my Orange Pi 5. I already tried this with no success, since I can't find the mentioned files (I have /sys/class/leds/status_led instead of red/orangepi etc.). Any tips? Thank you in advance! 🙂

• 0

  Reputation Points

• 7 replies
• 16.7k views

Arturo Alee

September 6, 20233 yr

My Orange Pi 5 appears to be completely dead. No lights turn on when the power is connected and the SD card is freshly imaged as well. This started happening when I connected a USB-C multi-port dongle with a connected PD power supply to it. Is it possible to revive this?

• 0

  Reputation Points

• 7 replies
• 8.7k views

Ravi Terala

November 27, 20232 yr

The code being compiled is the latest mainline. My compile command: ./compile.sh build BOARD=rock-5b BRANCH=vendor BUILD_DESKTOP=yes BUILD_MINIMAL=no DESKTOP_APPGROUPS_SELECTED= DESKTOP_ENVIRONMENT=gnome DESKTOP_ENVIRONMENT_CONFIG_NAME=config_base KERNEL_CONFIGURE=no RELEASE=noble ENABLE_EXTENSIONS=mesa-vpu It has not been compiled successfully and is stuck here. I am in China and have used a VPN. Sometimes it compiles successfully, but after installation, the 3D acceleration feature is not detected. In the GNOME settings, it shows as LLVM software rendering. Installing 3D extension packages [ mesa-vpu ] [🚸] WARNING: SDCARD /var/cache/a…

• 0

  Reputation Points

• 7 replies
• 5k views

RND

March 19, 20251 yr

https://github.com/siderolabs/sbc-rockchip/issues/103 I'm trying to apply this patch, but I think i'm doing something wrong it doesn't seem to be working. I'm getting the same behavior. [ 1.369895] rockchip-dw-pcie a41000000.pcie: iATU: unroll T, 8 ob, 8 ib, align 64K, limit 8G [ 2.224201] r8169 0003:31:00.0 eth0: jumbo features [frames: 16362 bytes, tx checksumming: ko] [ 1.504906] rockchip-dw-pcie a40800000.pcie: iATU: unroll T, 8 ob, 8 ib, align 64K, limit 8G I tried putting the patch in: build/userpatches/kernel/rockchip64-current/ Then I tried it in: build/userpatches/kernel/archive/rockchip64-6.18/ b…

• 0

  Reputation Points

• 7 replies
• 1.8k views
• 1 follower

Werner

May 2May 2

I'm looking for information about the Ethernet chip on the Orange Pi 5. I need an SBC that has PTP hardware timestamp support (IEEE 1588). According to OrangePi.org, the Orange Pi 5 has the Motorcomm YT8531C, but I have not been able to find documentation that provides the answer about hardware PTP support. Most likely it does not, but I'd like to confirm on an actual device before purchasing one. If you have an Orange Pi 5, you can test this with this command: ls /sys/class/net |xargs -n1 ethtool -T If there is someone that is willing to run this command and post the output, I would appreciate it very much. Note: This is a cross-post from iot.stack…

• 0

  Reputation Points

• 7 replies
• 9.8k views
• 1 follower

royk

September 15, 20233 yr

Orange Pi 5 plus. It seems that in the 'edge' kernels, ssh is disabled by default. Since HDMI doesn't function this is a problem. I used the debugging UART and after setup I got the message "ssh.service is disabled" I enabled the service and all is well. Any reason why ssh would be disabled?

• 0

  Reputation Points

• 7 replies
• 9.7k views
• 1 follower

Marco Schirrmeister

April 26, 20242 yr

Hi, I've had my 5+ for a week now and tinker with it when I can. Some things I've noticed... Using Amrbian legacy 5.10 legacy.... the system draws about 2.2w idle using a USB meter and no peripherals attached. When using the trying the latest 24.2.0-trunk.79, the power draw increases to 3w idle. I also noted the LED flickers between green and red rather than blue and red with legacy. My guess is more peripherals are being enabled. When using legacy, the first time i run an apt-get update there are 39 'gets'. When I then added a launchpad ppa and run again I only get 6. Not sure why that is. I cannot get…

• 0

  Reputation Points

• 7 replies
• 6.2k views

Thewonderer

December 19, 20232 yr

Zero 3E, all images, same UUID/initramfs error on boot. Tried different flashing methods, sd cards. All the same fail. Board works with the old Joshua riek dist.

• 0

  Reputation Points

• 7 replies
• 2.7k views

Ary

July 11Jul 11

On a fresh Buster Minimal install, what is required to get armbian-config fully functional? apt install armbian-config 'works' but some functions don't, for instance it fails setting the locale as dpkg-reconfigure errors as usr/lib/armbian-config/jobs.sh line 839 dpkg-reconfigure : command not found EDIT: In armbian-config I selected 'full firmware package' and rebooted, time zone settings now work. Was odd that the welcome page said run armbian-config (beta) but it had to be installed manually via apt.

• 0

  Reputation Points

• 7 replies
• 7.6k views
• 1 follower

Technicavolous

March 6, 20215 yr

Using Linux tinkerboard 4.19.69-rockchip #5.95 SMP PREEMPT Mon Sep 2 07:34:36 CEST 2019 armv7l armv7l armv7l GNU/Linux Using glxgears as a test case.. I get 60fps without the screen rotated. If I rotate the screen right or left the frame rate drops to 4fps. That's on a fresh boot with nothing else running. I tested TinkerOS on the same board and it works fine rotated. My Raspberry PI 4 works fine rotated as well. What could be the problem with Armbian?

• 0

  Reputation Points

• 7 replies
• 6.5k views
• 2 followers

Igor

March 23, 20206 yr

Hello togehter, i had 2 ASUS TinkerBoard S and I want to work with your software... The Software was via Etcher installed on several MC - Cards (16, 32 and 64 GB), but it still not working. The POWER - LED is red and the both LEDs on GBIC - Interface are blinking green and yellow :-( So, what kind of problems that I have here. I tried out several IMAGE from your WebSite - but no one won't to work with me :-( Best regards Matthias

• 0

  Reputation Points

• 7 replies
• 4.5k views
• 1 follower

MatthiasK

March 24, 20206 yr

Problem 1 i just installed Operating system, and then used coding command sudo add-apt-repository ppa:liujianfeng1994/panfork-mesa sudo add-apt-repository ppa:liujianfeng1994/rockchip-multimedia sudo apt update sudo apt dist-upgrade sudo apt install mali-g610-firmware rockchip-multimedia-config to activate 3d accelerator. but it failed and an error appeared Errors were encountered while processing: /var/cache/apt/archives/mali-g610-firmware_1.0.0-1_all.deb E: Sub-process /usr/bin/dpkg returned an error code (1) https://ibb.co/0BhLJzm Problem 2 operating system can't mount exfat partition format so I used the following command sud…

• 0

  Reputation Points

• 7 replies
• 5.1k views

royk

February 17, 20233 yr

Video demonstrating issues reconnecting to Wi-Fi please help

• 0

  Reputation Points

• 7 replies
• 3.7k views

Igor

March 13, 20188 yr

@SteeMan the thing is I have a RockPro64 and the only way to get DP alt-mode working on the USB-C port is on the 4.4 kernel which isn't supported by newer versions. Is there any backup repo for buster? Thanks

• 1

  Reputation Points

• 7 replies
• 4.2k views

lululombard

March 30, 20242 yr

Hmm, seems i need someone holding my hand all steps of the way 😇. Soon i'll need to pay some.. 🥰 I got my OPI5plus working from emmc with nvme-to-sata adapter on edge kernel and now i have 5 HDDs and 1 SSD connected to it. Intended for ZFS with cache... But : ZFS module won't build. I installed linux-headers and tried # apt install zfsutils-linux zfs-dkms. --- Setting up zfs-dkms (2.1.9-2ubuntu1) ... Loading new zfs-2.1.9 DKMS files... Building for 6.7.0-rc1-edge-rockchip-rk3588 Building initial module for 6.7.0-rc1-edge-rockchip-rk3588 configure: error: *** None of the expected "bops->release()" interfaces were detected. …

• 1

  Reputation Points

• 7 replies
• 6.2k views

QuaxEros

February 4, 20242 yr

Hi ! I have a FriendlyElec NanoPi M5 and I want to play movies with it. But I want to squeeze everything out of this SBC ! So, I need hardware acceleration. I tested first with a OS image downloaded from FriendlyElec and mpv and (almost) everything works well. The mpv working configuration is: hwdec=rkmpp, vo=gpu, gpu-api=opengl. But I don't like that OS for other reasons, so I switched to Armbian. I installed the image "Armbian 26.5.1 KDE Wayland (Ubuntu 26.04 - vendor 6.1.115)", then I installed mpv, but when I try to play movies, it says: marus@nanopi-m5:/mnt/NAS/WDRed1/Samples/FullHD$ mpv --hwdec=rkmpp --vo=gpu --gpu-api=opengl H265.8bit.FullHD.192…

• 1

  Reputation Points

• 7 replies
• 2.3k views
• 1 follower

eselarm

July 8Jul 8

I connected an OV13850 camera to camera port 3. After enabling it in device tree config, I still can't see it in v4l2-ctl and other camera apps. dmesg | grep ov13850 shows nothing.

• 0

  Reputation Points

• 7 replies
• 4.2k views

unDefFtr

February 26, 20251 yr

Hello Developers, I ran into some issues installing the latest release on an Orange Pi 5 Plus. The images I downloaded are as follows: Armbian_24.11.2_Orangepi5-plus_noble_current_6.12.0_kde-neon-kisak_desktop.img.xz Armbian_24.11.2_Orangepi5-plus_noble_vendor_6.1.75_gnome-kisak_desktop.img.xz The KDE version will install and boot from the 256GB emmc drive, however it only works if there is a 4K HDMI monitor attached to HDMI1, I was not able to get it to display on a 1920x1200 HDMI monitor nor a USB connected or HDMI connected portable display (2560x1440). The Gnome version will boot with any of those 4 types…

• 0

  Reputation Points

• 7 replies
• 8.6k views

Werner

January 10, 20251 yr

I have connected USB 3.0 4 port hub to the type c of my radxa zero 3E but lsusb -t shows the hub is only on USB 2.0 as 480M. /: Bus 06.Port 1: Dev 1, Class=root_hub, Driver=ehci-platform/1p, 480M /: Bus 05.Port 1: Dev 1, Class=root_hub, Driver=ohci-platform/1p, 12M /: Bus 04.Port 1: Dev 1, Class=root_hub, Driver=ohci-platform/1p, 12M /: Bus 03.Port 1: Dev 1, Class=root_hub, Driver=ehci-platform/1p, 480M /: Bus 02.Port 1: Dev 1, Class=root_hub, Driver=xhci-hcd/1p, 5000M /: Bus 01.Port 1: Dev 1, Class=root_hub, Driver=xhci-hcd/1p, 480M |__ Port 1: Dev 2, If 0, Class=Hub, Driver=hub/4p, 480M and lsusb output Bus 002 Device 0…

• 0

  Reputation Points

• 7 replies
• 6.7k views
• 1 follower

Ali Alaei

July 15, 20251 yr

Currently running 24.8.3 and have copied it to the eMMC, working fine on both the µSD image and eMMC. (On the Rock-Pi-S, if you have a bootable image on the µSD card, it boots from that. If not, it boots from the eMMC.) Today, running from the µSD, I did an apt update and apt upgrade, and it updated a few packages (here's the list): # apt list --upgradeable Listing... Done armbian-config/unknown 25.2.0-trunk.154.1212.080011 all [upgradable from: 24.11.1] armbian-firmware/bookworm,bookworm 24.11.2 all [upgradable from: 24.11.1] base-files/bookworm 24.11.2-12.4+deb12u8-bookworm arm64 [upgradable from: 24.11.1-12.4+deb12u8-bookworm] linux-dtb-current-…

• 0

  Reputation Points

• 7 replies
• 3.8k views
• 1 follower

Meestor_X

December 30, 20241 yr

Dear all, I'm running latest Armbian Bionic on Pine64 RockPro64, trying to connect a Midi Keyboard device (having several of them for testing), but it is not recognized by ALSA. If I run acconnect -l After connecting the keyboard, it's not listed (same behavior with different keyboards). Does anyone possibly knows what module might be missing in the kernel? Thanks..

• 0

  Reputation Points

• 7 replies
• 4.5k views

Igor

June 18, 20197 yr

I want to share some information about an issue that I see on my OPi5+. Since I got it I am messing around with it and everything works great so far with the edge 6.7 kernel. One thing I noticed though was, that right after installation with nothing connected and when idle, there was one kernel process that was constantly consuming around 10% CPU time and the load stays at 1. The process was irq/136-hym8563. The number varies of course after each boot. Kernel driver is rtc_hym8563. Since it is build into the kernel I was not able to unload it as a first test. Side node, the issue is not seen on the Rock5b, so it seems OPi5+ hardware specific. Even if bot…

• 1

  Reputation Points

• 7 replies
• 5.1k views

Werner

February 14, 20242 yr

I am trying to build the kernel with the standards scripts, but directly on my orange pi 5. The build is stopping at some point because of a Warning issued by the compiler (this is the default behaviour for the compiler who does not tolerate any warning by default). (Some functions in the C code are depreciated, thus a warning is issue) How can I set the CFLAGS so that the kernel build takes it into account during compilation? Thanks.

• 1

  Reputation Points

• 7 replies
• 4.2k views

Tony3

February 8, 20233 yr

Desktop images with Armbian Linux v6.12 variant Cinnamon with mesa/vpu support fails to boot from SD card. The message displayed on screen is "Begin: Running /scripts/init-premount ... (initramfs) _" SPI was erased, and the minimal install have no issues booting from a sd card. The SBC is an Orange Pi 5 Plus with 16gb ram

• 0

  Reputation Points

• 7 replies
• 7k views
• 1 follower

Robert Pace

December 26, 20241 yr

Hi guys i am new on forum so i am sorry if this topic is in wrong place or if i badly look for answer in existing topics. I already using bionic legacy 4.4.199 destkop for few weeks and i am happy ( only problem which i have is with bluetooth-device manager not working aftar i connect keyboard or mouse and handsfree doesnt work too) but i see on web that there is new version so i download bionic 5.4.8 desktop to give a try. boot look normal until i get to tinkerboard login. there i use default root/1234 - it ask for changing root pass so i make it - then Retype pass and after enter it doesnt do anything. i can type anythong but enter only move…

• 1

  Reputation Points

• 7 replies
• 5.3k views
• 1 follower

TonyMac32

February 5, 20206 yr

After looking at this message from @Seb042 I thought it would be better to open a new topic to discuss this. From what I saw from my install: $ dmesg ... [ 6.166453] iwlwifi 0002:21:00.0: api flags index 2 larger than supported by driver [ 6.166480] iwlwifi 0002:21:00.0: TLV_FW_FSEQ_VERSION: FSEQ Version: 93.8.63.28 [ 6.167021] iwlwifi 0002:21:00.0: loaded firmware version 59.601f3a66.0 ty-a0-gf-a0-59.ucode op_mode iwlmvm [ 6.267334] iwlwifi 0002:21:00.0: Detected Intel(R) Wi-Fi 6 AX210 160MHz, REV=0x420 [ 6.273748] iwlwifi 0002:21:00.0: reporting RF_KILL (radio disabled) [ 6.450150] iwlwifi 0002:21:00.0: WFPM_UMAC_PD_NOTIFIC…

• 1

  Reputation Points

• 7 replies
• 5.5k views
• 1 follower

ricardo_brz

May 31, 20242 yr

Why does HDMI Audio work on Debian 12 Bookworm 6.1 version and not on Debian 12 Bookworm 6.12? I have updated to latest version and still no HDMI audio. Is there a patch or something i can do to fix this?

• 0

  Reputation Points

• 7 replies
• 3.6k views
• 1 follower

7alken

July 25, 20251 yr

Hello! First, and foremost, how issue looks like: https://imgur.com/a/ZrPUi9t Initially I noticed this issue with Dell UP3017 (2560x1600) on Libre Computer ROC-RK3399-PC (post). However later I noticed this on fresh Armbian installations on NanoPC-T4 too (post). Later on I found that old Armbian installations on NanoPC-T4 is unaffected, probably because of older uboot (something from last Armbian 5.xx days) that already flashed on eMMC. Yesterday I compared a couple of old Armbian images (initially that was posted here) Armbian_20.05.7_Nanopct4_focal_current_5.4.49.img - issue is not reproducible, Armbian_20.08.2_Nanopct4_focal_current_5.8.6.img …

• 1

  Reputation Points

• 7 replies
• 7.8k views
• 1 follower

RussianNeuroMancer

February 27, 20215 yr

I downloaded and flashed the three images of Armbian 24.8.1 (Noble GNOME, Ubuntu 22.04 Jammy and Debian 12 Bookworm) on the Banana Pi M7, connected to the computer via serial console. The three images are these: Armbian_24.8.1_Bananapim7_noble_vendor_6.1.75_gnome-kisak_desktop.img Armbian_24.8.1_Bananapim7_jammy_vendor_6.1.75_kde-neon-kisak_desktop.img Armbian_24.8.1_Bananapim7_bookworm_vendor_6.1.75_cinnamon-backported-mesa_desktop.img For each image, I booted and logged the board output. The board fails to successfully boot and instead gets stuck in a boot loop. I then mounted the armbi_root partition and edited the file armb…

• 1

  Reputation Points

• 7 replies
• 15.4k views
• 1 follower

armsom-jackson

November 29, 20241 yr

Sorry, don't have the Armbianmonitor info handy but wanted to get this started... I'm trying to bring up a Libre Renegade RK3328-CC for use as a media center. Armbian's performance is absolutely wonderful compared to the other builds I've tried on this box. Unfortunately, I want the HDMI output going to a Samsung Frame TV, and resolution negotiation fails badly -- I get obvious rasters with black between them, nowhere near the 4K that this TV model is capable of and not even a smooth conversion (Note that the eyes here suggests that the black line is occurring every third raster or something like that...) What information I have gathered so far: …

• 0

  Reputation Points

• 7 replies
• 5.3k views
• 1 follower

Joseph Kesselman

May 27, 20242 yr

Has anyone made (or bought!) an adapter that takes the 3 pin TTL-level console port and converts it to a DB9 or RJ45 port that can mount in a PCI bracket? If so, what did you use? And what port did you use to power it as the console port does not provide a 3.3V or 5.5V pin for power (there is a pin labeled "RSV" which seems to supply 5V and may be usable but I don't know its capabilities). I've done this before for other systems using these without too much trouble but when I tried with this board it's not working. Admittedly I haven't hooked it up to a scope to look at the signals, but I'm suspicious of the high baudrate being to blame. I have a couple USB ad…

• 1

  Reputation Points

• 7 replies
• 3.7k views
• 1 follower

blood

May 27, 20251 yr

Hello Armbian forum, I need to have a GPIO interrupt on Orange PI5. I have successfully installed WiringOP and I am using it with C code. The problem is that the interrupt is not working, and I am receiving the following error. How can I proceed? Does anyone know how to enable the WiringOP interrupt on the GPIO PIN? Code C : #define AUX 13 wiringPiISR(AUX, INT_EDGE_FALLING, &MyFunction); Error: wiringPiISR: unable to open /sys/class/gpio/gpio92/value: No such file or directory PS. I have just successfully installed this version: Armbian 23.02 Jammy Gnome

• 0

  Reputation Points

• 7 replies
• 4.5k views
• 1 follower

elsabz

June 8, 20233 yr

Hello!! I got Dolphin running under Armbian and it seems its mainly GPU bound for the games that Iv'e tested. I am aware that the Panfrost drivers are not optimal but I thought I'd like to try and squeeze a few extra fps out of this setup by overclocking the GPU if that's possible. Is it? And does anyone know how I can do that? Cheers!

• 0

  Reputation Points

• 7 replies
• 13.6k views

fredrum

March 11, 20233 yr

Fairly recently, I've noticed these warnings appearing when running apt update. I have tried importing the keys from the repositories in question, but that has not remediated the issue. root@modron:/home/luna# apt update Hit:1 http://deb.debian.org/debian trixie InRelease Hit:2 http://deb.debian.org/debian trixie-updates InRelease Hit:3 http://deb.debian.org/debian trixie-backports InRelease Hit:4 http://security.debian.org trixie-security InRelease Hit:6 https://download.docker.com/linux/debian trixie InRelease Hit:7 https://github.armbian.com/configng stable InRelease Get:5 http://armbian.lv.auroradev.org/apt trixie InRelease [62.3 kB] Err:5 http://armbian.lv.…

• 0

  Reputation Points

• 7 replies
• 9.3k views
• 3 followers

technik007_cz

March 1Mar 1

I installed latest vendor image and because of the wifi issues I switched to the edge kernel. I messed up my fstab, couldn't connect with ssh, so I plugged it to my monitor and a keyboard, but there was no video. Eventually, I fixed it by booting vendor image from my sd card, but I got curious. I know, that vendor image just works, so I flashed edge image to my sd card to see what's wrong. The monitor recognizes the presence of the board, but it's just a black screen. I can ssh to the board, so the image definitely booted, but there's just no video. Here's the log from my original installation. I kept 6.8 kernel because the video is not important to me.

• 0

  Reputation Points

• 7 replies
• 5.5k views
• 1 follower

VaRusLAN

June 5, 20242 yr

After booting up armbian 23.02.2 on my orange pi 4 LTS, cpu temp goes up to 95 deg celcius when stress testing (no heatsink or fan installed at all) and the device reboots shortly afterwards. I ran `armbianmonitor -m` when stress testing and found out that some of the cores are not throttling. I examined the default trip point settings coming with the image in the file /boot/dtb/rockchip/rk3399-orangepi-4-lts.dtb: trips { cpu_alert0 { temperature = <0x14c08>; hysteresis = <0x7d0>; …

• 0

  Reputation Points

• 7 replies
• 7.6k views
• 1 follower

mimosius

September 17, 20242 yr

My setup includes orange pi 5 plus, Samsung NVME SSD M2 4 TB with Armbain os. 256 GB eMMC and Intel BE 200 Wi-Fi. There are no drivers for the intel BE 200 Wi-Fi or any instructions to make it work.

• 1

  Reputation Points

• 7 replies
• 9.1k views
• 2 followers

razvanphp

May 1, 20251 yr

I've downloaded the Armbian 25.5.1 (Kernel 6.12) Home Assistant image (https://dl.armbian.com/orangepi5-plus/Bookworm_current_minimal-homeassistant), burned to microsd and rebooted the orange pi 5 plus. I burned the image to a microsd cards, inserted the microsd and did a hard reboot of the SBC. The error message is "Gave up waiting for root filesystem device."

• 0

  Reputation Points

• 7 replies
• 3.5k views

Igor

July 30, 20251 yr

Hi! I just booted Armbian_20.08_Rockpro64_focal_current_5.7.15.img via sdcard , but HDMI output seems to stop after "Starting Kernel". Just after that I see some yellow/black vertical lines on my monitor and then the screen goes black, no more HDMI input on the monitor. Logging into Armbian on the RockPRO then works fine via ssh, can do the setup, update etc. So it looks like a problem with HDMI output? Anyone ideas how to solve this? Would like to have console terminal access via HDMI as last resort Thanks in advance! p.s. Just tried the Armbian_20.08_Rockpro64_focal_current_5.7.15_desktop which seems to have t…

• 1

  Reputation Points

• 7 replies
• 7.7k views

rik-shaw

November 17, 20205 yr

Hi, I've got several tinkerboards that I've reproduced this problem on. I'm using the tinkerboard to do network tests, this includes iperf3 traffic,dns querys (dig), https and http (echoping), and ping. All of these tests runs against IPv6 targets and IPv4 targets. These tests are scheduled to very frequently (every other minute or so). To begin with, all tests run fine.. I get good results (~1gbit throughput / low latency / no packet loss). However, after running the tests for 15-20min, suddenly all traffic will more or less stop working (80-90% packet loss). This is no matter what I'm pinging, can be the local router, some target on the…

• 0

  Reputation Points

• 7 replies
• 7k views
• 1 follower

berre

May 13, 20188 yr

Hi all, recently I installed the Mali GPU Drivers from the instructions on the official Armbian website. I have Armbian 23.02.2 Jammy installed, with KDE Plasma desktop. I found two problems: 1. The mouse flickers when I move it. This happens on both XFCE and Plasma (X11) 2. Every once in a while, the Plasma panels freeze and I have to reboot my OPI to get it to work. This also happens if I right-click on it and press "Enter Edit Mode". If I don't do that, it freezes randomly (afaik). This affects both the panels and the background (panels don't update, can't interact, cannot right-click). Does anyone know of any solutions to this? Thanks!

• 0

  Reputation Points

• 7 replies
• 7.6k views
• 2 followers

royk

February 23, 20233 yr

Hello Armbian-Community! TL;DR I've successfully enabled the Rockchip RK3568 NPU (0.8 TOPS INT8) on the ODROID-M1 with 8GB RAM running Armbian 6.18.9-current-rockchip64. The only thing needed to make this work for everyone is a 1-line kernel patch in Armbian build that I've already submitted: https://github.com/armbian/build/pull/9403 Once this patch is merged into Armbian, the DKMS modules will work out-of-the-box on all RK3568 boards. The Problem 1. Hardkernel and Rockchip provide NPU patches for quite old kernel versions: rockchip <= 6.6 hardkernel <= 5.10 2. IOMMU …

• 0

  Reputation Points

• 7 replies
• 4k views

ferro

August 4Aug 4

Hi, I've downloaded Ubuntu-mainline image at https://www.armbian.com/tinkerboard/ and written to SD as below but Hang while booting. # dd if=Armbian_5.35_Tinkerboard_Ubuntu_xenial_next_4.13.16_desktop.img of=/dev/mmcblk0 5742592+0 records in 5742592+0 records out 2940207104 bytes (2.9 GB, 2.7 GiB) copied, 481.509 s, 6.1 MB/s Log: U-Boot SPL 2017.09-armbian (Nov 22 2017 - 17:12:11) Returning to boot ROM... U-Boot 2017.09-armbian (Nov 22 2017 - 17:12:11 +0100) Model: Tinker-RK3288 DRAM: 2 GiB MMC: dwmmc@ff0c0000: 1 *** Warning - bad CRC, using default environment In: serial Out: serial …

• 0

  Reputation Points

• 7 replies
• 6.6k views
• 1 follower

Tido

December 2, 20178 yr

Hello all, I am running an Orange Pi 5 board with Armbian on a SD Card and I realized that my /var/log path is constantly full, with it being at /dev/zram1 It gets full at 50Mb with the file /var/log/samba/cores/smbd/core taking up all the space I have not managed to read this file, so I can't tell what kinds of errors are showing up. My OpenMediaVault and samba setup are running perfectly fine, and even though I delete this core file, it shows up again during reboot. I have tried to set enable core files = no in smb.conf With no sucess. The file continues to show up during reboot. Any ideas how to solve this? …

• 1

  Reputation Points

• 7 replies
• 8.7k views
• 1 follower

bedna

Thursday at 03:56 AM4 days

hello guys bluetooth stopped working uname -a Linux pinebook 5.15.76-rockchip64 #22.08.8 SMP PREEMPT Sun Oct 30 10:57:32 CET 2022 aarch64 GNU/Linux dmesg | grep Bluetooth [ 9.863147] Bluetooth: Core ver 2.22 [ 9.863249] Bluetooth: HCI device and connection manager initialized [ 9.863261] Bluetooth: HCI socket layer initialized [ 9.863266] Bluetooth: L2CAP socket layer initialized [ 9.863276] Bluetooth: SCO socket layer initialized [ 9.972130] Bluetooth: HCI UART driver ver 2.3 [ 9.972144] Bluetooth: HCI UART protocol H4 registered [ 9.972147] Bluetooth: HCI UART protocol BCSP registered [ 9.972218…

• 0

  Reputation Points

• 7 replies
• 6.5k views
• 3 followers

ckohn

February 21, 20233 yr

Hi everyone, I just received an "orange pi 5 plus" and I wanted to use the hdmi-input feature in it. I installed armbian and added the hdmirx overlay, and now I can use ffmpeg or gstreamer to stream video input. Good. Alas, I see no alsa hdmi input card. I tried to search for some settings but didn't find any... The only information I found on this feature are here https://github.com/armbian/linux-rockchip/blob/rk-6.1-rkr3/arch/arm64/boot/dts/rockchip/rk3588-orangepi-5-plus.dts do you have any pointer to give me on how to enable this feature? (I know how to compile stuff, using Linux since 1998 ) thanks …

• 1

  Reputation Points

• 7 replies
• 12.3k views
• 1 follower

ozacas

October 16, 20241 yr

Hi all, I am a newbie here. Is there a way to install ZFS on RockPro64 RK3399 with the latest Armbian release (doesn't matter if it is bionic, buster or focal)?

• 0

  Reputation Points

• 7 replies
• 5.4k views
• 1 follower

joekhoobyar

October 25, 20223 yr

I slowly convinced myself that I wanted a PineBook Pro, some time after the first production run. But then COVID, parts shortages, etc. happened and they were not available again until about mid-2022. But when they were, I decided to snap one up. And since then I have not been able to get it to boot Armbian. It came from the factory with Manjaro, which for me being a Debian guy, might as well be useless. So the PBP sat around collecting dust. Since then I have tried a few times to get it to work. I read many forum posts, tried some things. I won't document all that in detail. In this post, I will continue from where I left off her…

• 1

  Reputation Points

• 7 replies
• 10.4k views
• 2 followers

TRS-80

July 27, 20242 yr

After upgrading today with "apt update && apt upgrade" I was no longer able to watch videos. mpv player would Segfault, also tried vlc - not working either. Gnome desktop with wayland itself works, only video playback seems to be affected. After rolling back the following packages in liujianfeng1994 repo it started to work again: librockchip-mpp1:arm64 OLD: 1.5.0-1+git221020.d63affb~jammy NEW, causes segfault: 1.5.0-1+git230210.c145c84~jammy The repository no longer has the old version, but I managed to get it back to 1.5.0-1+git221020.d63affb~jammy like this #Find the deb file from cache find /var/cache/apt -name '*librockc…

• 0

  Reputation Points

• 7 replies
• 7.6k views

martivo

February 13, 20233 yr

Orange Pi 5 user here, got a new NVMe and decided to try the KDE Neon image for a first time, as it's reported that it's been tested and works: And it does -- until you do an apt update and reboot. Upon reboot, the graphical client and cursor appear but keeps popping up a bunch of error reporting windows, because KWin has crashed Just curious if anyone else wants to try it and confirm because you might want to remove that blurb Gnome image works great though, I've been running it full-time as a desktop with excellent stability and long long uptime

• 1

  Reputation Points

• 7 replies
• 3.9k views
• 1 follower

JFL

August 18, 20251 yr

When connected to some PC monitors, the image is larger than the physical screen: about 20 pixels at the top and bottom sides, and 50 pixels at the right and left sides are missing. This happens as soon as the board boots (without logo), the start of lines are truncated, and this also happens on text ttys (Ctrl + Alt + F1..6). I guess it's about a boot env variable, but I could not find it.

• 0

  Reputation Points

• 7 replies
• 4.7k views

bolet75

June 24, 20242 yr

Hello, my Orange Pi 5 works well with the stock OS (1.22, Ubuntu Jammy, BSP kernel 6.1.99), using the SD as a boot device. It also works ok with Armbian Minimal-IoT / Debian 13 / 6.1: v25.8.2 for Orange Pi 5 running Armbian Linux 6.1.115-vendor-rk35xx But I prefer Ubuntu and wanted to try 6.12, so I downloaded 25.8.2 / Ubuntu Server / 6.12. Wrote to SD, hooked up the debug UART and powered on. The bootloader is fine, the kernel starts, but at a certain point it panics: [ OK ] Reached target sockets.target - Socket Units. Starting armbian-hardware-monitor.…ce - Armbian hardware monitoring... …

• 0

  Reputation Points

• 7 replies
• 4.7k views

XFer012

December 1, 2025Dec 1

Hello, here with a Radxa Rock 5 ITX I experience endless loading at reboot after some system upgrades... But not always. Am I doing something wrong by using the command reboot from ssh ? instead of shutdown and power up ? In that case the system loads to rescue mode, asking for the root password and even if entered correctly does not identify. All comes back to working state with a shutdown and a reboot. Notice : I've made a donation to support the team. Please help.

• 0

  Reputation Points

• 7 replies
• 3.4k views

Werner

April 8, 20251 yr

Hello all! Not sure what is going on at all but I'm having a problem booting the "rolling release" of armbian (debian 14/forky) minimal cli. I'm using a nano pi R76S with 4gb of RAM and 64GB emmc. I can successfully burn a microsd for the previous version (also minimal cli vesion) which boots ok.However if I try to use the newer version nothing happens -- the red LED on the R76S stays permanently on and I get no display or any other life. I did try using different microsd cards but it did not make any difference. I also tried using the same microsd (I wrote the older version first to the microsd which boots) then wrote again on the sa…

• 1

  Reputation Points

• 7 replies
• 2.2k views
• 1 follower

SuperKali

May 21May 21

I am working with a Rock Pi S v1.3 and thus far the only image I have been able to get to boot is Armbian 21.05.9 Focal with Linux 4.4.247-rockpis. I have tried the recent Arabian Bookworm, Armbian Jammy and a few other variations I have come across on various forum posts here. With the above working image I can communicate with it via UART and get to the terminal. With everything else I don't even get the blinking blue LED; just two solid green LEDs. I have a few of these boards and have confirmed this issue across all of them. I am not sure what next steps to take so any pointers would be greatly appreciated. Thank you very much in ad…

• 0

  Reputation Points

• 7 replies
• 5.6k views
• 2 followers

boi

June 9, 20233 yr

Hello everyone, I recently installed my orangePi 5 to pass workload from my x86 servers over to the orangePi. My main focus is to reduce my overall energy consumption of my homelab. TL;DR Kernel thinks, that while being idle the sweet spot for the frequencies in "ondemand" and "schedutil" is: 1024MHz on the small chips (CPU0-3) 816MHZ on the big chips (CPU4+5, CPU6+7) Reason is an internal cost calculation power vs. frequency gain, which sorts out the lower frequencies. Long story: After getting my first orangePi5 in place, I started to play around with the hardware. I am running: █ █ █ █ █ █ █ █ █…

• 1

  Reputation Points

• 7 replies
• 9.1k views
• 1 follower

Matthias Strubel

September 20, 20233 yr

I just upgraded to Arabian 24.5.1 using `apt-get upgrade` and now I cannot load ip_tables: # modprobe ip_tables modprobe: ERROR: could not insert 'ip_tables': Exec format error I’m not sure what to make of it.

• 0

  Reputation Points

• 7 replies
• 5.4k views
• 1 follower

Koehn

November 26, 20241 yr

Guys, i'm new. I enabled the sata module in armbian-config then i did sudo dd bs=1M if=/path/your/armbian.img of=/dev/sda status=progress && sudo sync overlays=opi5-sata is in mnt/boot/armbianEnv.txt Without the sd, the orangepi boots in initramfs. I've added a screenshot with the shell output on hdmi. I can boot from SD but that's not what i need. Any thoughts whats going on?

• 0

  Reputation Points

• 6 replies
• 6.5k views

vanbinsbergen

July 30, 20233 yr

Is there an Armbian image with home assistant that isn't minimalistic? or Is there a way to install HA on a more robust desktop armbian 25.2 image for the Orange Pi 5 Plus? I feel the orange pi 5 is robust enough to handle HA under a desktop Armbian environment than other SBCs.

• 0

  Reputation Points

• 6 replies
• 6k views
• 1 follower

eselarm

July 25, 20251 yr

I was trying to enable i2c on my RockPro64, and when looking at the documentation in the overlay directory, it states this: rockchip (Rockchip) ### Provided overlays: - i2c7, i2c8, pcie-gen2, spi-spidev, uart4, w1-gpio ### Overlay details: ### i2c7 Activates TWI/I2C bus 7 I2C7 pins (SCL, SDA): GPIO2-B0, GPIO2-A7 GPIO1-C5, GPIO1-C4 ### i2c8 Activates TWI/I2C bus 8 I2C8 pins (SCL, SDA): GPIO1-C5, GPIO1-C4 Note that the "GPIO1-C5, GPIO1-C4" from i2c8 is accidentally included on the i2c7 pins line. I would submit a PR for this change, but ... I'm not sure where this document actually lives, and it's not easy to figure out. …

• 0

  Reputation Points

• 6 replies
• 4.9k views
• 1 follower

ak_hepcat

February 15, 20224 yr

Hello, I've used the Tinkerboard S (Rockchip RK3288) with the Armbian images available for download (https://www.armbian.com/tinkerboard/). Currently, the /dev/ttyS4 serial port is not available unless CONFIG_SERIAL_8250_NR_UARTS=5 when the Linux kernel is built since the serial ports are populated in /dev starting with /dev/ttyS0 and the last serial port to be populated is /dev/ttyS4. By default, CONFIG_SERIAL_8250_NR_UARTS=4. Some additional kernel settings are required to ensure that all of the available serial ports can be utilized. Moreover, I had to activate I2C4 in the device tree overlay using the Armbian configuration utility (https://docs.armbi…

• 1

  Reputation Points

• 6 replies
• 4.8k views
• 2 followers

nkinar

March 27, 20224 yr

I just tried the official Jammy image on the Rock Pi S, which does not boot. Looking at serial, it halts after "Starting kernel ...". I've tried redownloading the image, burning it again and on a different SD card. I also tried the bullseye image, which *does* boot (which makes me believe this is not a hardware issue). Anyone with a Rock Pi S that could confirm my observation? This image failed to boot: Armbian_22.08.7_Rockpi-s_jammy_edge_5.19.16.img Serial output: rock-pi-s-fail.txt This image booted ok: Armbian_22.08.7_Rockpi-s_bullseye_edge_5.19.16.img Serial output: rock-pi-s-ok.txt Diff of serial output (up t…

• 1

  Reputation Points

• 6 replies
• 4.5k views
• 1 follower

Igor

January 11, 20233 yr

I compiled Armbian Rock-5c bookworm vendor 6.1.99 minimal. WiFi driver extension radxa-aic8800.sh breaks Rock 5C vendor (kernel 6.1.99) boot. I compiled without the extension to confirm. The radxa-aic8800 driver has recently been modified in the download source. I modified radxa-aic8800.sh to download the previous driver version "3.0+git20240327.3561b08f-2" and this does not fix the issue. Ref: Jira AR-2603 Logs attached. Any fix or insight would be good. @amazingfate is this something that you might have ideas about? armbian-hardware-monitor.log rock5c-debug.log

• 0

  Reputation Points

• 6 replies
• 7.8k views

schwar3kat

February 7, 20251 yr

Hello, I want to install libdrm from here https://github.com/rockchip-linux/libdrm-rockchip But there are already problems with autogen.sh. See below. Does anyone have a tip for armbian (Debian stretch) on how to install this library? The Clash Spoiler $ ./autogen.sh autoreconf: Entering directory `.' autoreconf: configure.ac: not using Gettext autoreconf: running: aclocal --force -I m4 ${ACLOCAL_FLAGS} autoreconf: configure.ac: tracing autoreconf: configure.ac: creating directory build-aux autoreconf: running: libtoolize --copy --force libtoolize: putting auxiliary files in AC_CONFIG_AUX_DIR,…

• 1

  Reputation Points

• 6 replies
• 7.1k views

Clash

April 9, 20188 yr

Hi! I've had for quite a while the following error messages at startup: [ 39.095667] zswap: default zpool zbud not available [ 39.095670] zswap: pool creation failed This has happened with various 5.0, 5.1, 5.2 and now 5.3 kernels. Any idea what I should do to fix it? Mathias

• 0

  Reputation Points

• 6 replies
• 6.3k views

Mathias

September 11, 20197 yr

Hello I encounter a problem when I run the TCPDUMP command Here is the error eth0: SIOCETHTOOL(ETHTOOL_GLINK) ioctl failed: Device or resource busy Work like a charm with Radxa Debian OS, but on two Armbian same problem. Someone knows why ? Thanks

• 0

  Reputation Points

• 6 replies
• 3.8k views
• 1 follower

Neooostef

November 24, 20241 yr

Hi Guys, It seems that I can't boot latest Armbian image from SD-card - system always boots into "inintramfs". See the screenshot. SD-card is 100% working (all sectors tested). The image - 25.11.1_noble_6.12.58_gnome_desktop (downloaded from front page of OrangePi5). Checksum is OK. Please note - I've already tested 3 different prorgams for images: USB-imager, Rufus, Win32diskimager. Nothing helped))). I also re-wrote MTD flash (not sata) by "armbian-install" and got nothing (!) I use my main Armbian-server installed on nvme, but I would prefer to run SD-images as well... Unfortunately, as I see, this became very difficult task lately(((. …

• 1

  Reputation Points

• 6 replies
• 4.4k views
• 1 follower

peacepenguin

September 11Sep 11

How can I recover from this? I haven't rebooted: _ _ _ /_\ _ _ _ __ | |__(_)__ _ _ _ / _ \| '_| ' \| '_ \ / _` | ' \ /_/ \_\_| |_|_|_|_.__/_\__,_|_||_| v24.8.4 for Orange Pi 5 running Armbian Linux 6.10.6-current-rockchip-rk3588 Packages: Debian stable (bookworm) IP addresses: (LAN) 192.168.1.2 10.8.0.1 (WAN) xxx.xxx.xxx.xxx Performance: Load: 1% Up time: 21 days 23:00 Memory usage: 10% of 15.35G CPU temp: 41°C Usage of /: 21% of 233G Tips: Support our work and become a sponsor https://github.com/sponsors/armbian Commands: System config : sudo armbian-config System…

• 0

  Reputation Points

• 6 replies
• 10k views
• 2 followers

ScottP

November 16, 20241 yr

Hello Everyone, As I am still working on hardening my Odroid-M1 servers, I am looking for a solution to activate a real console for root login only. My homelab is not in the same room as my desk, so I need to get access from an internal VLAN with restrictions and take control even if the network drivers are not enabled. Have you tested or used a UART to Ethernet converter like https://www.pusr.com/products/ethernet-to-uart-modules-usr-k7.html or https://www.waveshare.com/uart-to-eth.htm or something else? Let me know your thoughts. Sincerely, Frederic

• 0

  Reputation Points

• 6 replies
• 4.1k views
• 1 follower

going

August 20, 20233 yr

Thank you all for this series of notes. I have been operating Armbian 22.08 successfully using the sd card on my PBP and like it BUT I would like to boot from emm. I have tried dozens of ways to install it to no avail. Seems to be associated with the rootdev=UUID=... If I use the UUID provided in the Armbian-install then I can boot from emm but it ends up mounting and running from the SD partition. Is there any code that can be inserted into the /boot/armbianEnv.txt file that would provide better diagnostics? To me it appears as if the emm partitions UUID is not available at boot time. Thanks, Carl

• 1

  Reputation Points

• 6 replies
• 6.9k views
• 2 followers

AB-Stromer

July 11, 20233 yr

May I ask where to add and place the background image？？ help.....

• 0

  Reputation Points

• 6 replies
• 3.7k views

Werner

September 5, 20242 yr

I installed latest Armbian_24.5.1_Orangepi5-plus_bookworm_vendor_6.1.43_minimal.img and I can't get wifi to work. The adapter is RTL8852BE. I installed armbian-firmware-full and the adapter is shown in lspci, but there is no wireless interface. armbian-config does not list wifi as an option. armbianmonitor -u

• 0

  Reputation Points

• 6 replies
• 10.8k views
• 4 followers

EricaLina

January 1, 20251 yr

After some days of uptime Zram usage is 100% https://paste.armbian.com/fecegemiwe What can I do with it?

• 0

  Reputation Points

• 6 replies
• 4.9k views
• 1 follower

atone

January 17, 20233 yr

Hello, After 5 years of loyal service, my Helios64 SBC just died on me last night. Would a Radxa Rock5 ITX+ and a M.2 to Hexa SATA Adapter could be a good drop in replacement to reuse the case? Both are Mini-ITX so it would fit. I know I would lose the front panel lights and power/reset button, and I would need to cut the back panel to fit the I/O shield but these are minor problems. What I am more concerned with, is if it is at all possible to power the 5 HDD from the radxa board (as the Helios 64 board didi). Helios engineers had made it possible to do it with minimum power, mainly by starting up the drives sequentially. …

• 0

  Reputation Points

• 6 replies
• 2.6k views
• 1 follower

luneth

December 26, 2025Dec 26

Hello, compiling Kernel 5.4.40 (setting in lib.config with KERNELBRANCH=tag:'5.4.40') under Vagrand with RT-Patch "patch-5.4.40-rt24.patch" putting in " ~/build/userpatches/kernel/rockchip64-current/ "for RockPro64 fails. ........ [ o.k. ] * [l][c] general-rt5651-add-mclk.patch [ o.k. ] * [l][c] mp8859-kbuild-makefile.patch [ o.k. ] * [c] patch-5.4.40-rt24.patch [ o.k. ] * [l][c] rk3328-add-dmc-driver.patch [ o.k. ] * [l][c] rk3328-audio-and-renegade-supplies.patch [ o.k. ] * [l][c] rk3328-clean-up-codec-gpio-SD.patch [ o.k. ] * [l][c] rk3328-fix-wrong-mmc-shift.patch [ o.k. ] * [l][c] rk3399-add-sclk-i2sout-src-clock.patch [ o.k. …

• 0

  Reputation Points

• 6 replies
• 4.8k views
• 1 follower

martinayotte

May 27, 20206 yr

Keep getting the error below when trying to run docker containers. I have a first gen Tinkerboard with Armbian on a SSD. Seen some post's about some error with cgroups v2, and using kernels below 5.x sudo docker run -d --name hello hello-world b22653867370a24ab900fc077f50fc6b05bb6eb986906caee88250fc9e9f5433 docker: Error response from daemon: failed to create shim task: OCI runtime create failed: runc create failed: unable to start container process: error during container init: error setting cgroup config for procHooks process: bpf_prog_query(BPF_CGROUP_DEVICE) failed: function not implemented: unknown. docker --version Docker version 20.10.21, build b…

• 1

  Reputation Points

• 6 replies
• 7.1k views

alex9534126

January 2, 20233 yr

I purchased a ROC-RK3328-CC from LovRPi.com. The ONLY OS available I can get to boot is Armbian, so this is important. This is a new install. Everything seems to work well enough except DNS. The browser can't resolve domain names, though it can access the various routers' IP's.. cat resolv.conf shows the head text and nameserver 127.0.0.53 I've tried editing the network connection, adding DNS servers, which had no effect except that systemd-resolve --status shows the correct DNS servers for eth0 (the wired connection). This cannot be altered by systemd-resolve --set-dns=[DNS Server IP]. It doesn't throw an error but neit…

• 0

  Reputation Points

• 6 replies
• 23.4k views

Johnny

November 21, 20187 yr

My application creates 15 threads. Since A53 has 4 cores it is likely that more threads will be spawned by A53. Is there a way to manipulate scheduling and create more threads through cortex A72 so that it compensates the delay. Examples 6 threads on A72 and 9 threads on A53. This way it ensures the run time does not fluctuate and we achieve peak performance.

• 0

  Reputation Points

• 6 replies
• 4.7k views
• 2 followers

jock

June 28, 20188 yr

Hi. By updating the system today caused the hardware acceleration to fail. Start-Date: 2023-08-04 12:26:33 Commandline: apt upgrade Upgrade: armbian-jammy-desktop-gnome:arm64 (23.02.2, 23.08.0-trunk--1-Vf900-B4c8e), system-monitoring-center:arm64 (1.43.9, 1.43.10), ufw:arm64 (0.36.1-4build1, 0.36.1-4ubuntu0.1), libmutter-10-0:arm64 (42.9-0ubuntu1, 42.9-0ubuntu4), libpoppler-cpp0v5:arm64 (22.02.0-2ubuntu0.1, 22.02.0-2ubuntu0.2), mutter-common:arm64 (42.9-0ubuntu1, 42.9-0ubuntu4), poppler-utils:arm64 (22.02.0-2ubuntu0.1, 22.02.0-2ubuntu0.2), libpoppler-glib8:arm64 (22.02.0-2ubuntu0.1, 22.02.0-2ubuntu0.2), gir1.2-mutter-10:arm64 (42.9-0ubu…

• 0

  Reputation Points

• 6 replies
• 6.9k views
• 1 follower

-

August 8, 20233 yr

Hello. I want to try UEFI boot on this board. And I have one question. Can I use Rockchip vendor kernel with Armbian UEFI?

• 0

  Reputation Points

• 6 replies
• 7.6k views
• 1 follower

VennStone

August 5, 20251 yr

Hi everyone, I'm facing an issue with Armbian installation on Rock 5B Plus. Hardware Board: Radxa ROCK 5B+ (RK3588) Storage: NVMe #1 (system): 256 GB, in M.2 slot 1 NVMe #2 (backup): 128 GB, in M.2 slot 2 Boot: MTD flash + NVMe Power supply: both POE+ HAT 25W and official power supply 30W Software Armbian: 25.11.2 Desktop ubuntu Kernel: 6.1.115-vendor-rk35xx Boot configured via armbian-install → “Boot from MTD Flash, system on NVMe” Initial install steps Wrote Armbian image to microSD and booted from SD. Used armbian-install to install: Boot from MTD Flash, system o…

• 0

  Reputation Points

• 6 replies
• 4.9k views
• 1 follower

armbuilder

April 22Apr 22

Hello, I am using Armbian 23.8.2 Jammy for Orange Pi 5 PLus and it cannot diplay 4K via HDMI. How to enable/switch this on?

• 0

  Reputation Points

• 6 replies
• 5.4k views

thanh_tan

March 22, 20242 yr

So recently I decided to use my (quite old) tinker board, I downloaded the last armbian (desktop, 4.4.213) OS, managed to install a vncserver (x11vnc) and also to use it without a screen plugged in it. And now I would like to turn it into a urbackup server, but I got some error with mdadm, "Module md_mod not found in directory /lib/modules/4.4.213-rockchip". I tried to use this forum to find a solution (https://github.com/armbian/build), but I couldn't make it work. When i tipe ´´git clone https://github.com/armbian/build´´ it stop around 7% at resolving deltas, and it just freeze. Someone could have any idea how to solve this issue?? And i can't get my armbianmon…

• 0

  Reputation Points

• 6 replies
• 5.5k views

Werner

May 12, 20206 yr