Rockchip

On my Odroid M1 I have a display that will not work, other displays do work. Unfortunately, I need this display to work. When I plug it in, I see "PHY PLL not locked" in dmesg. If I boot with it plugged in, I see the Hard Kernel logo, then the screen turns off as Armbian boots. I booted into the Ubuntu 20.04 Gnome image provided by HardKernel and that one works. 1. What could I change to allow this display to be detected? 2. Can I just force the board to boot with output to 1024x768@60. I just need the output. Thanks all.

• 0

  Reputation Points

• 0 replies
• 2.2k views
• 1 follower

JohnCHarris

May 12, 20233 yr

I am using Wifi/BT USB dongle to connect network for Orange Pi 5. But it does not work with Armbian. It works smoothly with Orange Pi's Ubuntu and Debian distros. I just need to insert the dongle into USB 3 to work. Is there anything I can do to use the dongle with Armbian? My dongle is "USB WiFi Bluetooth Adapter Dual Band 2.4/5.8Ghz Wireless RTL8821CU Don-ig"; https://www.ebay.com.au/itm/404244701011

• 0

  Reputation Points

• 5 replies
• 5.6k views

oh122

January 3, 20242 yr

Hi there. I just got my hands on a brand new 5T with 24GB of RAM and installed Armbian 26.04 minimal on it (on an SD card - no eMMC on this board). I immediately put it to use running CI jobs, however started seeing segfaults and things almost straight away. Current power source is the Radxa 60W power supply. Currently passively cooled (with the Radxa heat sink). Hasn't gone over 70º in the last 24 hours, even when maxxed out compiling rust packages. Here's information about the board: james@kassandra:~$ cat /proc/device-tree/model Radxa ROCK 5Tjames@kassandra:~$ james@kassandra:~$ dpkg -l | grep '^ii linux-' ii linux-base …

• 0

  Reputation Points

• 13 replies
• 2.7k views

jamesharton

May 11May 11

Referring the MPP samples, i have got an application which can give me NV12 data. 4 instance(or threads) of this application will give me raw data, i need to scale all of them in a single screen. Is it achievable through Mali GPU with current development of userland/kernel driver? Also i need to perform composition. On that tiled screen, i need to show other semi-opaque(transparent) window. Which library can help me to do the same?

• 0

  Reputation Points

• 0 replies
• 2k views

naseeb

September 27, 20188 yr

Hi. I installed Armbian_20.02.1_Tinkerboard_bionic_current_5.4.20_desktop on my TinkerBoard (not S) and get weird screen state (white, then growing black circle in the middle). I tried Armbian_20.02.1_Tinkerboard_bionic_legacy_4.4.213_desktop and it works very good, but I still want to test vulkan driver, so I updated only kernel to 4.19 (install linux-image-next-rockchip, linux-header-next-rockchip, linux-dtb-next-rockchip and delete 3 old packages). After reboot I got same screen. Is it known bug? Can it be related, that I'm using HDMI-to-VGA adapter? Can you help me to fix it or get usefull logs?

• 0

  Reputation Points

• 11 replies
• 6.4k views

Myy

April 19, 20206 yr

I used sudo swapoff -a as suggested in this thread: but the setting isn't persisted, and upon reboot sudo swapon --summary shows a partition There's no "swap" text in my /etc/fstab I'm trying to install Kubernetes, so I need to disable swap.

• 0

  Reputation Points

• 1 reply
• 4.5k views

trip

April 10, 20206 yr

Hello ! Not found any devices How to make it work? hciconfig -a hci0: Type: Primary Bus: USB BD Address: E8:48:B8:C8:20:00 ACL MTU: 1021:6 SCO MTU: 255:12 UP RUNNING PSCAN RX bytes:1537 acl:0 sco:0 events:148 errors:0 TX bytes:3430 acl:0 sco:0 commands:136 errors:0 Features: 0xff 0xff 0xff 0xfe 0xdb 0xfd 0x7b 0x87 Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3 Link policy: RSWITCH HOLD SNIFF PARK Link mode: PERIPHERAL ACCEPT Name: 'orangepi5' Class: 0x000000 Service Classes: Unspecified Device Class: Misce…

• 0

  Reputation Points

• 1 reply
• 2.8k views
• 1 follower

Michael Robinson

March 22, 20242 yr

Has anyone successfully migrated from 23.2 (stable) to 23.5 (stable)? Is that scenario possible today? I'm looking to get the Bluetooth working, I know it has been fixed in 23.5 but that one is currently broken.

• 1

  Reputation Points

• 3 replies
• 2.9k views
• 1 follower

Werner

July 20, 20233 yr

Hi all, I'm using a UEFI based edge ubuntu 24.04 image which reported a kernel stack trace (system still seems functional and no ongoing issue/messages) - [ 22.382942] rcu: INFO: rcu_sched detected expedited stalls on CPUs/tasks: { 5-.... } 6 jiffies s: 381 root: 0x20/. [ 22.382966] rcu: blocking rcu_node structures (internal RCU debug): [ 22.382972] Sending NMI from CPU 7 to CPUs 5: [ 22.382983] NMI backtrace for cpu 5 [ 22.382995] CPU: 5 PID: 92 Comm: kworker/u16:2 Tainted: G W 6.8.5-edge-arm64 #2 [ 22.383004] Hardware name: Orange Pi Orange Pi 5 Plus/Orange Pi 5 Plus, BIOS v0.9.1 10/12/2023 [ 22.383009] Workqueue: writeb…

• 0

  Reputation Points

• 0 replies
• 1.5k views

ozacas

April 14, 20242 yr

I downloaded and flashed the three images of Armbian 24.8.1 (Noble GNOME, Ubuntu 22.04 Jammy and Debian 12 Bookworm) on the Banana Pi M7, connected to the computer via serial console. The three images are these: Armbian_24.8.1_Bananapim7_noble_vendor_6.1.75_gnome-kisak_desktop.img Armbian_24.8.1_Bananapim7_jammy_vendor_6.1.75_kde-neon-kisak_desktop.img Armbian_24.8.1_Bananapim7_bookworm_vendor_6.1.75_cinnamon-backported-mesa_desktop.img For each image, I booted and logged the board output. The board fails to successfully boot and instead gets stuck in a boot loop. I then mounted the armbi_root partition and edited the file armb…

• 1

  Reputation Points

• 7 replies
• 15.4k views
• 1 follower

armsom-jackson

November 29, 20241 yr

So my boss deploys a plethora of Asus TInkerboards to assist with production. We are currently using an OS image provided to us by this website---specifically, Ubuntu_xenial_next_desktop.7z. On some occasions, with kick ass access points, the tinkers will disconnect from the wireless network that we are using. We are also using an antennae attachment which seems to help a bit with connection issues. Without providing too much specific info, is there an updated driver being worked on somewhere that I could be pointed towards? Any info/words of wisdom would be very helpful! Thank you! Best regards and thanks in advance! Joey

• 0

  Reputation Points

• 3 replies
• 2.8k views

Joey Gehring

January 25, 20188 yr

I get "DRM_IOCTL_PANFROST_CREATE_BO No space left on device", is 1GB RAM too little? Also the screen goes black when the app boots, is that a problem with X11/Wayland?

• 0

  Reputation Points

• 3 replies
• 3k views

laibsch

August 22, 20251 yr

Hi, Got a Tinker Board and tried the 5.41 Xenial mainline 4.14.23 desktop -> https://www.armbian.com/tinkerboard/#kernels-archive Need to enable the I2S on 40pinheader connector for both playback & capture (192KHz/32bits) but I dont seem to find the info for this. Any help is valuable!

• 0

  Reputation Points

• 0 replies
• 2.5k views

Christos

May 21, 20188 yr

Which Os does support hardware encode h264\h265 ? Or where i can read about status supporting hardware encoding for video (h264\265) and image (jpeg) ? chip: RK3288

• 0

  Reputation Points

• 1 reply
• 3k views

TonyMac32

January 18, 20197 yr

I have a TinkerBoard S. In Bionic Desktop (kernel 4.4), the wireless icon menu lists two devices: wlan0 (which is the expected interface) and p2p0: I don't know this one, but it is always chosen for auto-connecting to the local wireless lan, receiving a random IP and not the one I configured on the router. I can then manually connect to the network with the wlan0 interface the IP is correct. How do I disable / remove / anyway stop that p2p0 interface to "steal" the network connection?

• 1

  Reputation Points

• 2 replies
• 9.9k views

trip

April 11, 20206 yr

My microphone is not working on armbian jammy gnome Device : Opi 5 16GB I tried to use command arecord -l I showed 1 sound card Named rockchip or something like it with similar name.

• 0

  Reputation Points

• 4 replies
• 3.2k views
• 1 follower

rbrisita

May 7, 20233 yr

playing around with armbian-config after switiching to vendor kernel - missing "toogle hardware configuration" Left is on (previous legacy vendor) kernel with "24.5.1 and right is legacy kernel with "24.2.1"" Just curious if anyone know why that is? Perhaps I should have taken other steps when switching to vendor kernel(I have rebooted and confirmed it is running vendor kernel prior to screenshot)

• 0

  Reputation Points

• 0 replies
• 1.7k views

igelkotten

May 27, 20242 yr

I got my Orange Pi 5 board to boot v6.1.20 I took all the patches from here: https://gitlab.manjaro.org/manjaro-arm/packages/core/linux-rk3588/-/tree/main/ and built from Armbian's latest trunk source. These patch(es) will need to be modified to support v6.2 & v6.3. > uname -a > Linux orangepi5 6.1.20-rockchip-rk3588 #trunk SMP Tue Apr 25 11:47:11 UTC 2023 aarch64 aarch64 aarch64 GNU/Linux

• 0

  Reputation Points

• 2 replies
• 6.6k views

Darwin wu

July 16, 20233 yr

Sorry, don't have the Armbianmonitor info handy but wanted to get this started... I'm trying to bring up a Libre Renegade RK3328-CC for use as a media center. Armbian's performance is absolutely wonderful compared to the other builds I've tried on this box. Unfortunately, I want the HDMI output going to a Samsung Frame TV, and resolution negotiation fails badly -- I get obvious rasters with black between them, nowhere near the 4K that this TV model is capable of and not even a smooth conversion (Note that the eyes here suggests that the black line is occurring every third raster or something like that...) What information I have gathered so far: …

• 0

  Reputation Points

• 7 replies
• 5.3k views
• 1 follower

Joseph Kesselman

May 27, 20242 yr

HI, On one orangepi5B, it seems not possible to have details from u-boot when starting target. The first messages on HDMI start with the kernel root@hn-orangepi5b-450:~# dmesg |head [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x412fd050] [ 0.000000] Linux version 6.12.0-current-rockchip-rk3588 (build@armbian) (aarch64-linux-gnu-gcc (Ubuntu 11.4.0-1ubuntu1~22.04) 11.4.0, GNU ld (GNU Binutils for Ubuntu) 2.38) #3 SMP PREEMPT Sun Nov 17 22:15:08 UTC 2024 [ 0.000000] KASLR disabled due to lack of seed [ 0.000000] Machine model: Xunlong Orange Pi 5 [ 0.000000] efi: UEFI not found. [ 0.000000] NUMA: Faking a node at [m…

• 0

  Reputation Points

• 0 replies
• 2k views

Jean-Marc

January 30, 20251 yr

Sir, I have Purchase the Tinker board before 20 days, I install the Armbian 5.35 version in the Board, All software are very Nicely Work , but could not connect audio , I am trying to the 10 more times reinstall the Armbian 5.35 version but could not connect the audio output in audio 3.5mm Jack , I will so tired please solve this Problem in my tinker Board …

• 1

  Reputation Points

• 1 reply
• 3.9k views
• 1 follower

TonyMac32

January 25, 20188 yr

I need one more component working. 3D and OpenCL. Has anyone successfully installed Panfrost on a RK3399 board ? Update! I manged to build the Panfrost X11 driver. Here's how I did it: https://panfrost.freedesktop.org/building-panfrost-mesa.html Before you create the build directory update the meson_options.txt file change platforms from auto to x11 change dri_driver from auto to swrast change gallium-drivers to panfrost cd to the build directory meson .. . -Ddri-drivers= -Dvulkan-drivers= -Dgallium-drivers=panfrost -Dlibunwind=false --prefix=/{wherever you want} ninja install …

• 1

  Reputation Points

• 28 replies
• 28.1k views
• 3 followers

Merblud

October 13, 20197 yr

Tinkerboard (old one, not S) to be used as x2go thin client. Installed latest image (5.70_Tinkerboard_Ubuntu_bionic_next_4.19.14_desktop), applied all updates. Working fine (thanks to everybody who contributed). Issue remaining: My Tinkerboard refuses to use the monitor's native display size of 1920x1200, tried several monitors and cables (HDMI to DVI adapter cables, in case this is relevant). Without any modifications, Armbian desktop comes up with 1280x960. I used xrandr to set 1920x1080 (works), but 1920x1200 leads to "xrandr: Configure crtc 0 failed". Any chance to resolve this?

• 0

  Reputation Points

• 2 replies
• 4k views

Azq2

March 21, 20197 yr

i'm stuck with this since day 1 but now i upgraded to armbian (with kodi-gbm) i had this problem worse stress testing the board with stress -c 4 doesn't bring the board into shutdown, but logging in to kodi-gbm or using graphical interface? it brings instability all of a sudden. there's no inherent pattern from the shudowns except when i launch kodi or access some files (emby transcoding doesn't cause any instability). anything outside the text mode should cause it to shutdown. weirdly enough, when i removed the USB peripherals (2xUSB HDD, own power supply for both cases) the instability worsens and doesn't boot or sometimes reboot cycle after fsck.ext4 on sta…

• 0

  Reputation Points

• 1 reply
• 3k views
• 1 follower

xAda

January 13, 20233 yr

Hi, How can i get the Rknpu working in Armbian for latest builds. I am unable to find how to make this work. Thanks in Anticipation

• 0

  Reputation Points

• 0 replies
• 2.1k views
• 1 follower

Rajiv Singh

August 18, 20242 yr

All images have build dates 1 month back. Several images seem to be based on "vendor kernel". What is happening? G

• 1

  Reputation Points

• 19 replies
• 8.7k views

compent

March 6, 20251 yr

I have the latest armbian 6.1.75-vendor-rk35xx (ubuntu with gnome desktop) installed and everything works perfectly except that some videos are hanging in chromium. In dmesg I get [23230.260311] [drm:rockchip_vop2_mod_supported] *ERROR* Esmart0-win0 unsupported format modifier 0x800000000000351 and then boom, the whole thing stops playing and hangs. No other error anywhere. This happens with specific mp4 videos on specific frames. Any suggestions?

• 0

  Reputation Points

• 1 reply
• 2k views
• 1 follower

ArmBoy1988

October 7, 20242 yr

This will be a catch-all for HDMI-related things. Sep. 29, 2017 UPDATE First up is hotplugging in Mainline. Script/rule added to build system. Thank you @botfap for the script I am getting the system events triggered saying the HDMI is unplugged/replugged, (using udevadm -monitor) however nothing is happening in response to the events it would seem, the screen is still blank. I could hook a script to the event, but I'm not exactly sure what I would tell it to do... Any thoughts would be great, I'll be researching.

• 1

  Reputation Points

• 19 replies
• 16.9k views
• 2 followers

Tido

March 1, 20188 yr

Hello, I've installed the 22.11 version with the 5.15 kernel on the microSD card. I've a rockpro64 with the SSD adapter and a WD black 250GB nvme. The system doesn't recognizes this drive. I've tested the latest stable ayufan image (kernel 4.4) and it recognises it perfectly. Should I downgrade the kernel to the 4.4 branch? Any help would be appreciated. Thanks,

• 0

  Reputation Points

• 0 replies
• 2.2k views
• 1 follower

jolosan

December 11, 20223 yr

Hello, I am using Armbian 23.8.2 Jammy for Orange Pi 5 PLus and it cannot diplay 4K via HDMI. How to enable/switch this on?

• 0

  Reputation Points

• 6 replies
• 5.4k views

thanh_tan

March 22, 20242 yr

I've noticed that some system images will start the OrangePi with 4:2:2 output on HDMI instead of 4:4:4. This causes artifacts, especially when there's white text on a red background. What's the interface or method to change this? Does this have to be done via U-Boot or can it be done in userspace?

• 0

  Reputation Points

• 3 replies
• 2.7k views
• 1 follower

jock

May 2, 20242 yr

Hello, currently on Rock5B running Armbian 24, I am not seeing the U-Boot output logs during UART debugging. Where in the source code can I enable this? Thank you.

• 0

  Reputation Points

• 3 replies
• 3.6k views

eselarm

November 29, 20241 yr

I have built an Orange Pi 5 Plus systems. I have a 256gb eMMC card which seems to run as speed would expect. Yet when I test the NVMe drive I get slow speeds compared to what is suggested to get. I have seen other people posts that suggest they are getting at least 4gb/s using NVME drives. I have searched for other issues but there is no errors in the logs just can't get the speeds I was expecting. I have the following which suggests at least 5gb/s KINGSTON SNV3S500G I have formatted it using Ext4. root@orangepi5-plus:/boot# hdparm -Tt /dev/nvme0n1 /dev/nvme0n1: Timing cached reads: 2804 MB in 2.00 seconds = 1404.10 M…

• 0

  Reputation Points

• 3 replies
• 2.9k views

ozacas

December 14, 20241 yr

I Installed this image and it works fine. Sadly the build in WiFi module is not working. I now use an external wifi dongle. What could be the problem here? Ernst-Jan

• 0

  Reputation Points

• 13 replies
• 1.9k views
• 1 follower

eselarm

July 23Jul 23

Cannot login to wifi router. $ lsb_release -a No LSB modules are available. Distributor ID: Debian Description: Armbian 26.8.3 trixie Release: 13 Codename: trixie $ dmesg [ 18.683974] r8152 6-1:1.0 enx001e063222ad: carrier on [ 27.803475] wlxe0e1a93880f7: authenticate with xx:xx:xx:xx:xx:xx [ 29.112665] wlxe0e1a93880f7: send auth to xx:xx:xx:xx:xx:xx (try 1/3) [ 29.115405] wlxe0e1a93880f7: authenticated [ 29.126606] wlxe0e1a93880f7: associating to AP xx:xx:xx:xx:xx:xx with corrupt beacon and probe response [ 29.134087] wlxe0e1a93880f7: associate with xx:xx:xx:xx:xx:xx (try 1/3) [ 29.253998] w…

• 0

  Reputation Points

• 4 replies
• 751 views
• 1 follower

dev001

August 31Aug 31

Hopefully this is not a stupid question but I came across Joshua-Riek/ubuntu-rockchip: Ubuntu for Rockchip RK35XX Devices (github.com) when searching for my video playback issues. Does anyone know how this compares with the current armbian release with vendor kernel? Are all the fixes from that release integrated in armbian or does it go the other way?

• 1

  Reputation Points

• 15 replies
• 19.7k views
• 1 follower

going

November 1, 20241 yr

I have set up Armbian 24.8.4 bookworm on my 32GB Orange Pi 5 Plus. Most everything works as expected out of the box. The second HDMI port doesn't detect the second screen, and the screen displays No Signal. I have tested the cables and monitors to ensure they are functioning. I have also ensured I wasn't plugged into the HDMI input by accident. I was about ready to proclaim it a hardware issue, but on booting the "Official" Orange PiOS Arch image, the dual monitor support worked as expected. I checked the dtb file included with the Arch image, and it has many references to HDMI0 and HDMI1 devices, while the one used by default with the Armbian ima…

• 0

  Reputation Points

• 5 replies
• 5.7k views
• 1 follower

royk

October 27, 20241 yr

Hello! I set up a firewall on the Asus Tinkerboard. I came across a very strange thing - the lack of support for the CT target in iptables. In fact, it appears that iptables has support of given target, but the required kernel module is missing. After running cat /boot/config-4.4.120-rockchip | grep NETFILTER_XT_TARGET_ST I saw the following: # CONFIG_NETFILTER_XT_TARGET_CT is not set. What the reason of that decision? It blocks ability to forward sip, ftp and some other protocols precisely. And also blocks ability to use SYNPROXY target correctly. Is it planned to include this module in the build?

• 1

  Reputation Points

• 4 replies
• 3.8k views

Igor

August 16, 20188 yr

Hi, since i have a Asus tinkerboard incoming i was wondering if anyone knows if the "generic" arm64 distro will work this board. Its based of the rockchip RK3288 SoC The support pages states that the board supports debian, but since i dont need a UI ect (im going to use it headless) i dont need the board to load a ui into memory and wanted to use a normal build instead of the TinkerOS Please note, my knowledge of the inner workings of *nix is quite limited, so if my question is to generic or imprecise i apologize.

• 0

  Reputation Points

• 1 reply
• 5.1k views

Igor

October 11, 20206 yr

I installed the image on the SD card put the games in the roms folder correctly. I don't know why I have no sound in games. put it on two different smart tv's and both are without audio in games. Has anyone here experienced this and know how to solve it?

• 0

  Reputation Points

• 3 replies
• 2.8k views

Werner

October 13, 20224 yr

hi , i installed Armbian 22.11 Jammy minimal image for headless console only usage. uname -a Linux tinkerboard 5.15.80-rockchip #22.11.1 SMP PREEMPT Wed Nov 30 11:05:19 UTC 2022 armv7l armv7l armv7l GNU/Linux i installed teamviewer and if device rebooted with hdmi connected, i am able to use teamviewer and teamviewer shows shell output but when rebooted without hdmi cable connected, teamviewer seems working on device , but cant connect it.. here is teamviewer info TeamViewer 15.37.3 (DEB) TeamViewer ID: 1374960804 teamviewerd status ● teamviewerd.serv…

• 0

  Reputation Points

• 11 replies
• 5.4k views
• 3 followers

atone

January 10, 20233 yr

I am trying to compile the Kernel on my PC with the Ubuntu recommended version. I get the error below: arch/arm/dts/rk3128-evb.dtb: Warning (avoid_default_addr_size): Relying on default #address-cells value for /syscon@20008000/usb2-phy@17c arch/arm/dts/rk3128-evb.dtb: Warning (avoid_default_addr_size): Relying on default #size-cells value for /syscon@20008000/usb2-phy@17c FATAL ERROR: Couldn't open "./u-boot.dtb": No such file or directory ./tools/mkimage: Can't read u-boot.itb.tmp: Invalid argument make: *** [Makefile:1053: u-boot.itb] Error 255 Any idea what this could be? It is the first time I am running ./.compile.sh potential…

• 0

  Reputation Points

• 1 reply
• 3.1k views

Werner

February 7, 20233 yr

I only have options 1,4,5,7 on my nand-sata-install utility and can only boot from a single armbian microsd card but no other. /dev/mtdblock0 shows no files. Everything has been fine till now! Would love some help. Thanks

• 0

  Reputation Points

• 1 reply
• 1.7k views

Werner

January 24, 20242 yr

It seems that If I use the mainline kernel Ethernet does not work, in the sense that it doesn't even get initialized. ip addr will only show the loopback interface, and the kernel log will show this regarding the ethernet port. Could it be a device tree issue? [ 6.867997] rk_gmac-dwmac ff540000.ethernet: PTP uses main clock [ 6.868097] rk_gmac-dwmac ff540000.ethernet: Linked as a consumer to regulator.5 [ 6.868103] rk_gmac-dwmac ff540000.ethernet: clock input or output? (input). [ 6.868112] rk_gmac-dwmac ff540000.ethernet: TX delay(0x25). [ 6.868118] rk_gmac-dwmac ff540000.ethernet: RX delay(0x11). [ 6.868126] rk_gmac-dwmac ff540000.ethernet: integr…

• 0

  Reputation Points

• 13 replies
• 8.5k views
• 2 followers

jpegxguy

April 8, 20197 yr

So recently I decided to use my (quite old) tinker board, I downloaded the last armbian (desktop, 4.4.213) OS, managed to install a vncserver (x11vnc) and also to use it without a screen plugged in it. And now I would like to turn it into a urbackup server, but I got some error with mdadm, "Module md_mod not found in directory /lib/modules/4.4.213-rockchip". I tried to use this forum to find a solution (https://github.com/armbian/build), but I couldn't make it work. When i tipe ´´git clone https://github.com/armbian/build´´ it stop around 7% at resolving deltas, and it just freeze. Someone could have any idea how to solve this issue?? And i can't get my armbianmon…

• 0

  Reputation Points

• 6 replies
• 5.5k views

Werner

May 12, 20206 yr

This guide is specifically for the official orange pi 5 PCIe WiFi 6.0 Module that can be found here although it has been in and out of stock https://a.co/d/bhjoolW It uses the ap6275p chip. The guide will be split into 2 sections depending on what OS you want to use Orange Pi OS 1. install the wifi module into the m.2 slot and boot sd card with either the latest orange pi os ubuntu or debian http://www.orangepi.org/html/hardWare/computerAndMicrocontrollers/service-and-support/Orange-pi-5.html 2. edit the boot file to enable wifi by adding overlays=wifi-ap6275p to the end. Note if you already have overlays=<anything> line such as ssd-sa…

• 0

  Reputation Points

• 3 replies
• 26.2k views

adogecheems

June 8, 20251 yr

Dear all, I have recently acquired an ODROID M1 board and flashed Armbian 24.5.3 on it to replace my old XU4 running Armbian 24.5.1. I've managed to port everything from the old XU4 to the new M1 except for two WiFi dongles. They worked just fine on the XU4 but the M1 just doesn't want to recognize them, I can see them when I run `lsusb` Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 007 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 002: ID 0bda:0811 Realtek Semiconductor Corp. Realtek 8812AU/8821AU 802.11ac WLAN Adapter [USB Wireless Dual-Band Adapte…

• 0

  Reputation Points

• 16 replies
• 8.4k views
• 1 follower

Igor

April 7, 20251 yr

Hi, I am running the latest Armbian image with Noble + GNOME for the Rock 5C. I have build it using the `compile.sh` script without altering the kernel, desktop enabled, based on Noble, with GNOME, no applications, no extensions. Added the kisak PPA repo afterwards and enabled the panthor overlay for hardware acceleration. Should be close to the `Armbian_24.11.1_Rock-5c_noble_vendor_6.1.75_gnome-kisak_desktop.img` image, I think. With Chromium (few tabs), VSCodium (working on some code) and a couple of terminals open, things were crashing all the time. Here is a reproducable example with Chromium, when navigating t…

• 1

  Reputation Points

• 6 replies
• 6k views

ScottP

January 2, 20251 yr

I have been trying for days now to update my device and all goes well until i get to 'beta.armbian.com:80 (130.185.239.78)' and then it will not update and stays at 0%. i have tried on different! installations and on different devices even a new installation but the same problem occurs. It used to work fine until a couple of days ago! I have even tried turning off all security on my router but no change. Is there a reason for this , if so is there anything i can do to correct it?

• 0

  Reputation Points

• 2 replies
• 2.5k views
• 1 follower

Igor

February 12, 20251 yr

Hello! I'm trying to look around in the Armbian build/config scripts to see how I can enable a mainline v6.15-rc3 kernel to be built. I did try to make a build/userpatches/lib.config file with the contents, KERNELBRANCH="tag:v6.15-rc3" But that's not working. Would anyone be able to tell me the file I need to edit for an OrangePi 5? Update: I actually seem to have it try by editing config/sources/families/rockchip-rk3588.conf changing the version tag. But I get a bunch of red errors complaining about SHA1. hmm...an 'rc3' is probably not to be found in a tree with 'stable' in it. Cheers! Fred

• 0

  Reputation Points

• 2 replies
• 3.8k views

Fredrik

April 22, 20251 yr

As https://www.armbian.com/tinkerboard/ has a quite fresh 4.14 Linux kernel (in Armbian Stretch Next Desktop 5.50) I am trying to use that instead of the standard TinkerOS 2.0.7 with a 4.4.103 kernel. However, Armbian is configured to provide only spidev2.0, while TinkerOS can have spidev0.0, spidev0.1, spidev2.0 and spidev2.1 all enabled at the same time as long as you disable UART4 which shares GPIO header pins with SPI0. In the TinkerOS case, there is a config tool which edits a small and straightforward text file in /boot/ containing lines such as "intf:spi0=on" or "intf:uart4=off". The corresponding Armbian file seems to be /boot/armbianEnv.txt - possibly…

• 0

  Reputation Points

• 8 replies
• 5.5k views
• 1 follower

TonyMac32

July 28, 20188 yr

Hello, Some weeks ago, I installed the kinetic version. It was rooted on the nvme drive and was working decently. After some explanations on this forum, I decided to install the LTS version. I burned a new SD card, inserted it and powered on. I was never prompt about where to install the system. After installation, the df command shows that the system is installed on the sd card. I can see nvme partitions in /dev but they aren't mounted. nvme is partitionned in two parts : one for the system, the other one is crypted and dedicated to data. How should I do? Thanks Julien

• 0

  Reputation Points

• 4 replies
• 8.5k views

VolkerW

March 1, 20233 yr

I have Orange Pi 5 Plus that I plan to install in a remote location. To boot Orange Pi, I need to press the physical Power On button. How I can setup the machine to boot automatically once the power is supplied? There is nobody on the remote side to press this button. Or maybe there are other options to boot remotely like WakeOnLAN? Where it can be configured? In orangepi-config?

• 1

  Reputation Points

• 5 replies
• 4.7k views
• 1 follower

Werner

December 9, 20241 yr

Last week installed Armbian for the first time on my Pinebook Pro that was basically bricked from Manjaro. Everything worked great! Audio is a little weak, but will look into that later. Today I pulled down the 25.2.1/6.12.16 update. On booting in Grub, I now get a message "Loading Device Tree Blob...", followed by "Error: not a regular file Press any key to continue". The boot then continues after a bit, and system seems to work fine from a user perspective after that (posting this from the machine). But there are some rockchip-pcie, rk3399-dmc-freq and brcmf errors in the armbianmonitor output (attached url) . I'm an Armbian noob, so dunno if the…

• 0

  Reputation Points

• 0 replies
• 2.2k views

namahsrob

February 25, 20251 yr

Hello, I have installed the minimal Trixie based image for Orange Pi5 (the image named Armbian_26.2.1_Orangepi5_trixie_current_6.18.8_minimal) and then attempted to build an out-of-tree kernel module. Having installed dkms and build-essentials, plus the kernel headers through armbian-config, I found the headers package hasn't been fully set-up, the build symlink in /lib/modules/<KVER> is missing and dkms complains that the kernel headers for the kernel are not installed. The kernel headers are installed though, but it looks like they're from a previous release (25.11.2 instead of 26.2.1). # dpkg -l | grep rockchip ii linux-dtb-cur…

• 0

  Reputation Points

• 5 replies
• 2.2k views
• 1 follower

mitu

March 15Mar 15

Same with your ROC-RK3399-PC (Renegade Elite): https://libre.computer/products/boards/roc-rk3399-pc/ How do you plan to solve heat dissipation there? And do I get it right that the USB-C in the upper left corner is meant as a generic 12V input?

• 1

  Reputation Points

• 326 replies
• 144.8k views
• 11 followers

denni_isl

June 3, 20215 yr

There's a few problems with the UART driver on 5.0-rc2 kernels, since proper checks are not done correctly and lead to a Null Pointer dereference. Here's a patch to avoid this issue : From 7e43ae8446b420907f00b43308ad0b99b6fe4e51 Mon Sep 17 00:00:00 2001 From: "Miouyouyou (Myy)" <myy@miouyouyou.fr> Date: Wed, 16 Jan 2019 23:58:52 +0100 Subject: [PATCH] drivers: tty: serial: Bail out if no UART is detected Before the 5.0, serial8250_register_8250_port consisted of one BIG if(uart && uart->port.type != PORT_8250_CIR) block, which prevented NULL dereference if uart, a pointer to an "uart_8250_port" detected through "serial8250_find_ma…

• 0

  Reputation Points

• 1 reply
• 2.5k views

Myy

January 17, 20197 yr

Hi everybody, I have a problem with this version: Armbian_20.05.2_Rockpro64_buster_legacy_4.4.213.img I don't see my disk that is plugged on the PCIe To SATA Marvell 88SE9230 in the system. I've create the file /etc/udev/rules.d/99-marvell.rules with the following line on it: ACTION=="add", SUBSYSTEM=="pci", ATTR{vendor}=="0x1b4b", ATTR{device}=="0x9230", RUN+="/bin/bash -c 'echo %k > /sys/bus/pci/drivers/ahci/bind'" If I do the same thing with this version: Armbian_20.05.4_Rockpro64_focal_current_5.4.46.img, I see my disk after creating the file. But, there's two problem with this version: first the fan always running and, m…

• 0

  Reputation Points

• 2 replies
• 4.6k views
• 1 follower

AndrewCo

May 26, 20242 yr

Been trying to play 4k youtube videos with VLC and I haven't had any luck with vp09 and mp4 files. Is VP9 supported with 24.2.1 + kernel 5.10.160? I have no issues with hardware decoding of mp4/h264 in vlc but is vp9 hardware decoding possible? Browser seems to play youtube in 4k but not sure which codec it is using

• 0

  Reputation Points

• 0 replies
• 1.9k views
• 1 follower

OttawaHacker

April 14, 20242 yr

I've adapted a set of patches from Urja Rannikko, which move the HDMI frequencies definition into the DTS file, with some preconfigured rates if none are defined in the DTS. The original patches set is here : https://www.spinics.net/lists/arm-kernel/msg673156.html The big patch I used as a basis is here : https://github.com/urjaman/arch-c201/blob/master/linux-c201/0020-RK3288-HDMI-clock-hacks-combined.patch I included these patches by splitting them again : https://github.com/Miouyouyou/RockMyy/commit/57ff073fffb5678e75959e566704376f6f52ac17 These patches were suggested to me here : https://github.com/Miouyouyou/RockMyy/issues/3 …

• 0

  Reputation Points

• 3 replies
• 4.4k views
• 1 follower

jock

October 11, 20188 yr

On several RockPro64 boards I experience infrequent freezes, mostly directly on boot, but also after some longer (hours, days) uptime. I use the official power adapter and no additional hardware except a PCIe adapter for an SSD, which works flawlessly when operational. When looking at the kern.log, there are quite a few errors and warnings, but comparing to a successful boot these are all also present. So I don't think they cause the freeze directly. Currently, I recorded the freeze on the latest Armbian Bionic as release just recently. FWIW, I think the same issue also occurs on the previous Debian Stretch image (had various freezes, but have not …

• 1

  Reputation Points

• 16 replies
• 10.7k views
• 1 follower

Myy

April 1, 20206 yr

Has anybody seen this message at boot: [ 5.352826] CPU4: failed to come online [ 5.352835] CPU4: failed in unknown state : 0x0 [ 10.481328] CPU5: failed to come online [ 10.481336] CPU5: failed in unknown state : 0x0 Then, the A72 cores don't show up (unsurprisingly since these are the two cores that somehow did not come online). On top of that, the kernel throws a backtrace (related to sound if I understand correctly): ------------[ cut here ]------------ [ 13.014782] WARNING: CPU: 3 PID: 1 at kernel/irq/manage.c:1990 request_threaded_irq+0x144/0x180 [ 13.014784] Modules linked in: [ 13.014793] CPU: 3 PID: 1 Comm: swapper…

• 0

  Reputation Points

• 11 replies
• 6.4k views
• 1 follower

Myy

April 17, 20206 yr

Hi all, Is anyone here good with upbringing MIPI panels on Linux via device tree modifications? I've had an attempt with a specific LCD panel but I am not having any luck to be honest. I would love someone to kindly review my Git Diff/device tree changes for any errors. I've attached my LCD init code as well, as well as the DSI portion of the dmesg output log, as well as my schematics for the custom driver board I have designed. https://drive.google.com/file/d/18E5zOGlNpdWLrD43R7bB4N-Mf_8mQFKY/view Thank you! DSI_Debug_Log.txt

• 0

  Reputation Points

• 0 replies
• 1.5k views

StonedEdge

August 25, 20233 yr

Hello everyone I was trying to look for information in the forum but I can't find any topic where this specific issue is discussed. I also looked for help in the omv forum and they told me it was a problem with the distribution, hopefully you can help me. My system running Armbian_24.5.1_Orangepi5-plus_bookworm_vendor_6.1.43_minimal Install OMV, omv extras, i try to configure the compose folders and i get the 500 internal server error, clear cache, update and reboot system but there is no change, a moderator asked me for the log by executing the following command "Your error output is incomplete. What is the output of: sudo omv-salt …

• 0

  Reputation Points

• 1 reply
• 5.8k views
• 1 follower

Manuel Carvajal

June 18, 20242 yr

I downloaded the tinker nightly image and burned it to an sd card, putting it into the tinker it does nothing, the red light comes on but does nothing, the sd card is decent, and works fine if i write an image to it for a pi, power supply is fine as well, anyone got any suggestions as to my next steps getting this booted. Thanks

• 1

  Reputation Points

• 16 replies
• 30.3k views
• 1 follower

TonyMac32

July 30, 20188 yr

Hello people, I have an Asus Tinker Board S and decided to use the Mainline Armbian for this board, love the new panfrost driver but seems it is glitching all over the place, icons in the menu disappear and reappear when mouse hovers over them, tick boxes do not show if they are ticked and only flicker when mouse is over them and applications menu keep redrawing all over when trying to use among the most prominent problems. Other operating systems work well in this matter. Anyone else is having these problems with the mainline 5.4.28 kernel build?

• 0

  Reputation Points

• 1 reply
• 3.5k views

Nikos Giannakas

June 10, 20206 yr

Hi all, I’m new to this whole SBC thing, and I recently got an Orange Pi 5. I first installed the official OS (Ubuntu), where I needed to do into orangepi-config and go into System > Hardware > wifi-ap6275p and enable that to use the official M.2 WiFi dongle. However, I don’t see this option on Armbian. Does it not support it?

• 0

  Reputation Points

• 1 reply
• 2.9k views
• 1 follower

Igor

February 18, 20233 yr

Hi, Thank you for maintaining this excellent distribution, I have tried out this evening, via SD card, the new Armbian 23.11 Bookworm CLI Kernel 6.7 and I wanted to share some feedback on it along with some queries please: 1) HDMI works connected to my 4K Samsung TV, although I had to turn off "Input Signal Plus" for it to display the console correctly, otherwise there were all manner of green rectangles and other screen corruption present. Turning off "Input Signal Plus" fixed this straight away. 2) I cannot access either of the SSDs I have connected to my powered USB 3 hub. I tried with the hub connected to the USB-C port …

• 0

  Reputation Points

• 47 replies
• 20.4k views
• 1 follower

sugatam

February 13, 20242 yr

!!! Warning !!!: Think twice before you upgrade kernel on your PineBook Pro. After years unfortunately I decided to unlock upgrades Armbian Kernels and upgraded kernel to the newest one (current) - 5.15.93. After reboot Armbian couldn't find my encrypted root disk and booting ended every time in (initramfs). I installed again kernel 5.10.60 #21.08.1 and Armbian finds my encrypted disk again. Of course still there is no information that I have to enter the password to unlock disk but only black screen. Happily I know that I have to enter the password when the screen is black. Every upgrade of Armbian is connected with a dose of stress that I'll have to …

• 0

  Reputation Points

• 1 reply
• 2.4k views

Igor

January 16, 20242 yr

Hello! I had an issue upgrading my khadas edge2 to the linux-image-edge-rockchip-rk3588 package (24.8.0-trunk.597) on the edge/rolling release image I had installed. It looks like issues with building the initramfs files, specifically trying to symlink on top of a file that already exists and/or copying the /bin/osk-sdl binary. The following seems to have allowed me to use apt install -f to get the kernel and initramfs files to be built and installed successfully. Probably the change in the symlink code was unnecessary, but I did both and got a bootable system out of it, so it's a bit late for me to test. I made the following changes to /usr/share/…

• 0

  Reputation Points

• 0 replies
• 2k views

UnlikelyLass

August 18, 20242 yr

I've ran into two issues. The first my board won't boot off the Armbian Debian vendor image. Second it boots off the mainline Debian image, but when I try installing the boot onto the MTD via option 7 in Armbian-install it completes, but I get a solid blue LED and a UART output that hangs on BL31: Preparing for EL3 exit to normal world -> Entry point address = 0x200000 -> SPSR = 0x3c9 then it hangs. Before this I tried manually erasing the SPI and loader and reinstalling them with rkdeveloptool, but this didn't help. I would provide the UART logs, but the server is failing at uploading images. I'm looking to boot off the nvme, but I'm not sure how to resolve this.

• 0

  Reputation Points

• 2 replies
• 1k views
• 1 follower

JPWQ

June 28Jun 28

Dear Colleagues! In the I2S RK3288 interface rather limited number of timeslots of TDM (PCM). I try to use RK3288 spi as the subordinate controller for input and processing of a data stream of TDM (128 timeslots). Was - whether you have a practice of creation of spi of the driver for operation in slave DMA?. Perhaps for other chip. I will be glad to responses! Thanks!

• 0

  Reputation Points

• 0 replies
• 2.4k views
• 1 follower

sultan

July 27, 20188 yr

Hello everyone, I have a problem with my NanoPi R4S. The WAN (eth0) port does not work well when it is configured to work on 1Gbps/Full. When this setting is active there is about 15% packet loss, which is quite annoying. In my tests I have already been able to identify that if I configure the port to work at 100Mbps/Full everything works normally. So I found the forum-post below, that explain that some u-Boot version wasn't setting the correct clock configuration for the netwok device at boot time, but now I have installed the linux-u-boot-nanopi-r4s-edge 22.08.6 and linux-image-edge-rockchip64 22.08.8 but the problem still there. I…

• 1

  Reputation Points

• 6 replies
• 7.7k views
• 1 follower

Pedro Lucas

October 8, 20233 yr

Hi there, I've been trying to enable g_ether and USB OTG on my Orange PI 5+. I've tried things like editing /boot/orangepiEnv.txt and adding module-load dwc2,g_ether. However, I don't get any usb0 interface pop up which indicates to me that the USB/OTG mode is not set to peripheral on the settings. I'm not sure how to go about it? Would anyone be able to advise? I want to use the power port for also Ethernet.

• 0

  Reputation Points

• 4 replies
• 5.6k views

Werner

July 17, 20242 yr

Has anyone made (or bought!) an adapter that takes the 3 pin TTL-level console port and converts it to a DB9 or RJ45 port that can mount in a PCI bracket? If so, what did you use? And what port did you use to power it as the console port does not provide a 3.3V or 5.5V pin for power (there is a pin labeled "RSV" which seems to supply 5V and may be usable but I don't know its capabilities). I've done this before for other systems using these without too much trouble but when I tried with this board it's not working. Admittedly I haven't hooked it up to a scope to look at the signals, but I'm suspicious of the high baudrate being to blame. I have a couple USB ad…

• 1

  Reputation Points

• 7 replies
• 3.7k views
• 1 follower

blood

May 27, 20251 yr

Hello, Has anyone managed to get usb-redirector working? 4.14.70-rockchip and headers. with 'arm' It installs ok, and the driver loads... lsmod and dmesg confirms. Module Size Used by tusbd 126976 0 but when I try one the binaries, it just returns me back to the prompt.??? (i've tried other versions arm-eabi. armeb, that just returns file not found when using a binary) Many thanks. Mark

• 0

  Reputation Points

• 5 replies
• 3.5k views

MarkA007

March 14, 20197 yr

Hi, I have had some issues trying to boot from eMMC with the last version of Armbian (kernel v5.4) while it's working perfectly on Armbian with a v4.4 kernel. Images not working: https://dl.armbian.com/rockpro64/archive/Armbian_20.05.2_Rockpro64_bionic_current_5.4.43.img.xz https://dl.armbian.com/rockpro64/archive/Armbian_20.05.4_Rockpro64_focal_current_5.4.46.img.xz Working image: https://dl.armbian.com/_old/rockpro64/archive/Armbian_5.98_Rockpro64_Debian_buster_default_4.4.192.7z I though I messed up with the SPI or the eMMC card but after trying all I could, it finally worked using an old version of Armbian…

• 1

  Reputation Points

• 11 replies
• 10.7k views
• 1 follower

denni_isl

March 9, 20224 yr

Hello, After successfully installed and booted Armbian 23.02.2 Jammy from SD card on Odroid M1, I ran armbian-install script with using option "boot from SD, system on SSD" to move system to SSD. The process finished successfully, see the logs from armbianmonitor (taken before reboot): https://paste.armbian.com/folivedane After reboot, system failed to boot automatically from SSD due to error: [ 13.766854] 8644d43f-c78d-4586-ab61-14dfa2e740ea: Can't open blockdev [ 13.774855] systemd[1]: Starting Rule-based Manager for Device Events and Files... [ 13.781860] systemd[1]: media-mmcboot.mount: Mount process exited, code=exited, status=…

• 1

  Reputation Points

• 5 replies
• 6.2k views

vovo500

July 31, 20242 yr

I had this plan on utilizing the Radxa Rock 5 ITX+ as a Moonlight client device to stream games from my desktop computer to my living room TV, and using my 8BitDo Ultimate controller to play. On paper, the board has all the bells and whistles needed to do it, but I am having trouble getting hardware decoding of H264 and/or HEVC to work as expected. From what I gather, I need mesa-vpu support, but the documentation I find is very scattered, and repositories that once held the needed resources are no longer available. I am currently running Armbian_25.DBhsHKsx.2.2_Rock-5-itx_bookworm_vendor_6.1.99_cinnamon-backported-mesa_desktop.img (build date 21st of February, 2025), dow…

• 0

  Reputation Points

• 2 replies
• 3.7k views
• 1 follower

DavidFajardo

June 25, 20251 yr

Some prerequisites. Distro: Debian 12 bookworm, xfce; Board: Orange Pi 4 LTS; Screen: Samsung SyncMaster 923NW, 1440x900_60, VGA. Using hdmi to vga adapter with vga cable. Tried one piece hdmi to vga cable. Tried other all in one adapter that goes in to the screen and goes to hdmi cable. The problem. While running armbian distro screen resolution is set to be 1080p by default. Using xrandr I can not set it to suggested 900p. Every time I set any other resolution - screen turns black until I set it back to 1080p. It is not a hardware issue, because right now I am running headless Debian bullseye from orange pi and the resolution is set …

• 1

  Reputation Points

• 2 replies
• 4.3k views

Guillermo seara

November 5, 2025Nov 5

Starting today Oct 27 2025 I'm not able to upgrade armbian on Radxa 5C for any version from 6.12 and up with the multiple exceptions like this: Err:6 http://apt.armbian.com trixie/main arm64 armbian-plymouth-theme all 25.8.2 Hash Sum mismatch Hashes of expected file: - SHA512:718d46957b9e9940ba7569761069864c46b07bd5570db462894b81d2730803dc9f9b0618ed45104c6357b92ddf00600a9664b93bd3eaca8c453b4724ba495688 - SHA256:3ee8733f28c38f66f3a1328c93bf75d00416f8e2d1e7a5c91f4727489d7c1b00 - SHA1:2ad501942596de1a53e9339284635a712346a245 [weak] - MD5Sum:a7dc1e7a3ff05af314e49c0b841ce240 [weak] - Filesize:112140 [weak] Hashes of received fil…

• 0

  Reputation Points

• 1 reply
• 1.7k views

Werner

October 27, 2025Oct 27

Armbian_community_26.8.0-trunk.359_Rockpro64_trixie_current_6.18.38_minimal.img.xz If the image installs non free software on the computer can you tell which packages they are and how to remove them from the computer, such that no piece of non free software stays on the computer? In this post free software should be understood as coined by the fsf.org. Thank you.

• 0

  Reputation Points

• 1 reply
• 607 views
• 1 follower

eselarm

July 18Jul 18

Hello, Thank you ahead of time!! I realize there is not an armbian disro for the roc 3328 renegade. It does seem that you all can help with my issue though. I recently patched and compiled a kernel to run real time with the rt preempt. The issue I'm running into is this thing doesn't use grub , so I can't choose the kernel at boot up like a x86 and it doesn't have a config file like a rspi. Is there a way around this ? I'm way out of my comfort zone here. According to what I have read, I need to copy the vmlinuzrt18 to the area where the present kernel is being called now. I admitting find the whole u boot thing confusing. Can anyone help me out? Th…

• 0

  Reputation Points

• 23 replies
• 10k views
• 1 follower

TonyMac32

June 1, 20188 yr

IT'S FINALLY HERE... THE OFFICIAL ROCKCHIP-LEGACY MULTIMEDIA INTEGRATION After two years of using a separate script to enable the multimedia features in RK3288/3328 Legacy Kernel, the whole framework has been incorporated to the official Armbian packaging system. The choice distro for this integration is Debian Buster (see FAQ at the end of this post about the reasons). I. Installation Download a Armbian Buster Legacy Desktop image for your board, and install it with the standard Armbian method. Install the complete multimedia solution with sudo apt update && sudo apt upgrade sudo apt install media-buster-legacy…

• 1

  Reputation Points

• 112 replies
• 99.6k views
• 9 followers

zoomer

September 22, 20251 yr

I'd like some help please. The ethernet device naming seems inconsistent. Sometimes one interface comes up as eth0 and sometimes as eth1, and sometimes not at all. The enp1s0 interface seems to reliably come up, but not with the right config (sometimes it uses the config for enp1s0 and sometimes for eth0). I am trying to assign status IP addresses (on different networks) to each interface, but because of the unreliable bringup of the network interfaces, I can't get a config that starts up correctly and consistency on reboots or cold boots. As a test I ran the friendly-core-lite-focal from FriendlyCore and it does not have this i…

• 1

  Reputation Points

• 5 replies
• 5.1k views

poddmo

September 8, 20233 yr

Hello, I'm trying to setup a hotspot on a tinkerboard S running bullseye. Following the procedure from https://docs.armbian.com/User-Guide_Advanced-Features/ at the point where it requires: 2. Copy /etc/network/interfaces.hostapd to /etc/network/interfaces i realize the file interfaces.hostapd is missing, even though hostapd is installed hostapd is already the newest version (3:2.10-6~armbian22.02.3+1) I manually created the file with the following content even though I'm not sure if that's correct (as referred in one post on the forum): auto lo br0 iface lo inet loopback all…

• 0

  Reputation Points

• 0 replies
• 2.6k views
• 1 follower

alex9534126

December 31, 20223 yr

Hello, sorry for my English. I have an Orange Pi 5 8gb and a 512gb nvme SSD. I would like to use it to install 2 operating systems (Android 12 + Batocera). This way, when starting the orange pi, it asks which operating system I want to start on. Is this possible?

• 0

  Reputation Points

• 3 replies
• 5.3k views

Michael Robinson

May 15, 20242 yr

I am trying to boot my Rock 5C Lite from an NVME drive, but have experienced some problems with the vendor kernel. I followed instructions by amazingfate in this forum to create a small SD card with a u-boot image, ie I created a complete Armbian image (vendor kernel) on an SD card too boot up the Rock 5c Lite A second, small capacity SD card was inserted into the USB port using a USB adapter U-boot was transferred from /usr/lib/linux-u-boot-*/ to the small SD card: dd if=./idbloader.img of=/dev/sda seek=64 conv=notrunc status=progress dd if=./u-boot.itb of=/dev/sda seek=16384 conv=notrunc status=progress …

• 1

  Reputation Points

• 2 replies
• 5.4k views

north1

November 20, 20241 yr

This issue is about Nanopi M6 model without LCD, but there is no tag for Nanopi M6, even though it has Platinum support, so I had to set nanopi-r6c tag. The Ethernet interface can't receive settings from DHCP with errors: [ 12.894724] rk_gmac-dwmac fe1c0000.ethernet: IRQ eth_lpi not found [ 12.894866] rk_gmac-dwmac fe1c0000.ethernet: Looking up phy-supply from device tree [ 12.894876] rk_gmac-dwmac fe1c0000.ethernet: Looking up phy-supply property in node /ethernet@fe1c0000 failed [ 12.894892] rk_gmac-dwmac fe1c0000.ethernet: supply phy not found, using dummy regulator [ 12.894948] rk_gmac-dwmac fe1c0000.ethernet: clock input or output? (output). …

• 1

  Reputation Points

• 4 replies
• 4k views

aproxityloq

April 27, 20251 yr

Hi Guys, I just did a new custom Armbian build ./compile.sh BOARD=orangepi5-plus BRANCH=vendor RELEASE=noble KERNEL_ONLY=yes KERNEL_CONFIGURE=no. The image is Armbian-unofficial_25.11.0-trunk_Orangepi5-plus_noble_vendor_6.1.115_cinnamon_desktop and when I installed it on orangepi I see it is not supporting Panfrost/Mail: glxinfo | grep -E "OpenGL renderer|OpenGL version" OpenGL renderer string: llvmpipe (LLVM 20.1.2, 128 bits) OpenGL version string: 4.5 (Compatibility Profile) Mesa 25.0.7-0ubuntu0.24.04.2 but for older image Old_Armbian-unofficial_25.08.0-trunk_Orangepi5-plus_noble_vendor_6.1.115_cinnamon_desktop All was well glxinfo | grep -E "OpenGL rend…

• 0

  Reputation Points

• 9 replies
• 7.2k views
• 1 follower

Igor

November 24, 2025Nov 24

On the Tinker Board , I have tested a simple GPIO application using preinstalled wiringPi C library. I also ran the same application on Raspberry Pi using preinstalled wiringPi C library, but I noticed that the Tinkerboard GPIO speed is very slow. I wonder why this is the case. I would appreciate, if someone share opinion about it. I've added the C program and attached oscilloscope screen-display for GPIO port speed for both Tinker Board and Raspberry Pi. I tested Tinker Board with 2018-02-22-tinker-board-linaro-stretch-alip-v2.0.5 image. GPIO speed is about 158 Khz I tested Raspberry PI 3 Model B with 2018-03-13-raspbian-stretch image. GPIO speed is about 1.9…

• 1

  Reputation Points

• 10 replies
• 6.9k views
• 1 follower

chwe

April 23, 20188 yr

Has anyone run a comparison benchmark of Armbian vs. the Orange pi versions of Debian and Ubuntu? ...Curious to see the results of optimizations.

• 1

  Reputation Points

• 1 reply
• 3.3k views
• 1 follower

wyim

March 3, 20233 yr

Hello Armbian forum, I need to have a GPIO interrupt on Orange PI5. I have successfully installed WiringOP and I am using it with C code. The problem is that the interrupt is not working, and I am receiving the following error. How can I proceed? Does anyone know how to enable the WiringOP interrupt on the GPIO PIN? Code C : #define AUX 13 wiringPiISR(AUX, INT_EDGE_FALLING, &MyFunction); Error: wiringPiISR: unable to open /sys/class/gpio/gpio92/value: No such file or directory PS. I have just successfully installed this version: Armbian 23.02 Jammy Gnome

• 0

  Reputation Points

• 7 replies
• 4.5k views
• 1 follower

elsabz

June 8, 20233 yr

Wifi AP access point broken in Linux tinkerboard 5.4.44-rockchip #20.05.2 SMP PREEMPT Wed Jun 3 10:43:15 CEST 2020 armv7l armv7l armv7l GNU/Linux [ 456.873025] ------------[ cut here ]------------ [ 456.878198] kernel BUG at mm/slub.c:3968! [ 456.882680] Internal error: Oops - BUG: 0 [#1] PREEMPT SMP ARM [ 456.889200] Modules linked in: xt_MASQUERADE xt_conntrack ipt_REJECT iptable_filter nf_nat_h323 nf_conntrack_h323 nf_nat_pptp nf_conntrack_pptp nf_nat_tftp nf_conntrack_tftp nf_nat_sip nf_conntrack_sip nf_nat_irc nf_conntrack_irc nf_nat_ftp nf_conntrack_ftp iptable_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 fuse zstd snd_soc_hdmi_codec z…

• 1

  Reputation Points

• 8 replies
• 8.5k views

Roland G

October 25, 20205 yr

Hi I would like to use the UART on physical pins 3 and 5 (https://wiki.radxa.com/RockpiE/hardware/gpio) Does anybody know how to activate it? There is an overlay uart4 but it doesn't do what I expected it to do :-) Thanks Chris

• 0

  Reputation Points

• 1 reply
• 3.2k views

Werner

February 14, 20215 yr

Couldn't booti from NVME with armbian-config or armbian-install, finally I could do it, a dirty easy and convoluted following way. No details about burning stuff This is what I did 1) boot system from fresh downloaded SD (Armbian Jammy Desktop) 2) NVME setup (sudo gparted) - if empty create a partition table (GPT) if not delete all partitions - create 256MB FAT16 partition (nvme0n1p1) - create EXT4 partition (nvme0n1p2) - optionally create more partitions (system recovery, backups ...) - format partitions nvme0n1p1 -> FAT16 - format partitions nvme0n1p2 -> EXT4 - check partitions (if old N…

• 1

  Reputation Points

• 43 replies
• 31.6k views
• 2 followers

Werner

November 27, 20241 yr

Hi. Great work with Armbian. Any good advice setting up Wayland and pipewire (for OBS studio) on the Orange pi 5 (23.02 jammy gnome)? I did manage to install both pipewire+pipewire-media-session+pipewire-pulse+related qt5 Wayland package and setting up QT_QPA_PLATFORM=wayland environment variable. But no luck.

• 0

  Reputation Points

• 0 replies
• 4k views

Jorgen

May 14, 20233 yr

Hello, I have purchased the khadas edge2 board and am currently studying, May I ask where the system is configured in the framework to display prompt word identifiers after login？？？？ help help........

• 0

  Reputation Points

• 2 replies
• 1.7k views
• 1 follower

lay

August 20, 20242 yr

Hey guys, we are facing an issue we can not resolve ourselves so we are looking for some help on here... Our Rock Pi E does not restart successfully occasionally. Running the Rock Pi E with latest official Armbian with a USB soundcard attached. We are capturing audio and distribute the captured audio via "(c)VLC" via network. Since a few months we are facing reboot issues which are persistent but not easily reproducible. Whenever we reboot manually, everything works fine. When rebooting via cron it does often not reboot and get into a freeze state which makes it impossible to connect via SSH nor serial-adapter. We already tried switching the power so…

• 1

  Reputation Points

• 2 replies
• 3.1k views
• 2 followers

FabulousGee

November 12, 20241 yr

I have edge kernel installed and working. I compiled the v4l2 ffmpeg but some of my av1 videos are not working. After some digging I noticed that v4l2-ctl --device=/dev/video4 --list-formats-ext ioctl: VIDIOC_ENUM_FMT Type: Video Capture Multiplanar [0]: 'VT12' (Y/UV 4:2:0 (4x4 Linear)) [1]: 'NV12' (Y/UV 4:2:0) Shouldn't this include the 10 bit formats as well? (NV15?) Does anyone know why the 10 bit format is missing in the kernel? Is this specific to the orange pi? I found this GitHub - dongioia/rock5bplus-rkvdec2: Rock 5B+ (RK3588) on mainline Linux 7.1: V4L2 stateless RKVDEC2/Hantro hardware video decode (…

• 0

  Reputation Points

• 3 replies
• 1.4k views
• 1 follower

ArmBoy1988

August 5Aug 5