Rockchip

Hello people, Happily running Bookworm, because it was the mainstream download for OPI5 a few months ago, I now see that the main download for OPI is back to Jammy. Apart from hardware accceleration, Bookworm runs great for me. In fact HA is not crucial for my server usage, though it would be nice. Question: what is the reason the main OPI5 download is now back to Jammy in stead of Bookworm? And what would be the advantages of going back from Bookworm to Jammy? (Got the aluminium passively cooling case for the OPI5, so far it's been great, 10 minutes of stresstesting all 8 cores doesn't get above 70 degrees celsius. For reference my…

• 0

  Reputation Points

• 1 reply
• 1.7k views

Marc R

January 3, 20242 yr

HI, On one orangepi5B, it seems not possible to have details from u-boot when starting target. The first messages on HDMI start with the kernel root@hn-orangepi5b-450:~# dmesg |head [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x412fd050] [ 0.000000] Linux version 6.12.0-current-rockchip-rk3588 (build@armbian) (aarch64-linux-gnu-gcc (Ubuntu 11.4.0-1ubuntu1~22.04) 11.4.0, GNU ld (GNU Binutils for Ubuntu) 2.38) #3 SMP PREEMPT Sun Nov 17 22:15:08 UTC 2024 [ 0.000000] KASLR disabled due to lack of seed [ 0.000000] Machine model: Xunlong Orange Pi 5 [ 0.000000] efi: UEFI not found. [ 0.000000] NUMA: Faking a node at [m…

• 0

  Reputation Points

• 0 replies
• 2k views

Jean-Marc

January 30, 20251 yr

Armbian 23.08.0-trunk Bookworm with Linux 5.10.160-rk35xx root@orangepi5-plus:~# gpio -v gpio version: 2.46 Copyright (c) 2012-2018 Gordon Henderson This is free software with ABSOLUTELY NO WARRANTY. For details type: gpio -warranty * Device tree is enabled. *--> Orange Pi 5 Plus root@orangepi5-plus:~# gpio readall wiringPiSetup: mmap (GPIO) failed: Operation not permitted

• 0

  Reputation Points

• 3 replies
• 3.6k views
• 1 follower

royk

September 8, 20233 yr

I tried installing the OS using SD card and EMMC, but both failed. Orange Pi OS (Arch) on the official website ran normally. However, I installed focal_desktop_xfce or jammy_desktop_gnome from Ubuntu Image, but they all failed. After inserting the image into the SD card, the symptom is a black screen and no booting. Does it only support SSD? Because it is entered through a translator, there may be unnatural sentences. If you reply about that, I will get back to you.

• 1

  Reputation Points

• 20 replies
• 37.3k views
• 2 followers

deskwizard

September 5Sep 5

armbianmonitor -u https://paste.next.armbian.com/hoyonuruye I installed the newest fresh debian minimal image for the RockPi-S and no matter what I do overlays do not apply. I've followed and compiled spi1 and spi2 rk3308. I've also tested the external antenna device tree as I have installed an external antenna: However neither the external antenna is being used nor spidev are present. I have diffed dtc -I fs -O dts /proc/device-tree and they are identical before and after enabling the overlays in armbian-config and rebooting. I was able to confirm the "overlays" work by manually copypasting their changes in …

• 1

  Reputation Points

• 42 replies
• 29.4k views
• 4 followers

Meestor_X

July 31, 20251 yr

See for more details but without using the overlay-user folder - I was not able to get the pwm to work on a fresh download.

• 0

  Reputation Points

• 0 replies
• 1.7k views
• 1 follower

OttawaHacker

June 15, 20251 yr

Standard install - Armbian Bookworm, full 'firmware install'. I am getting some packet loss over the LAN. A raspberry pi, Synology NAS and Deban x86 install on the same LAN do not seem to exhibit the same loss. Anyone have experience or ideas? Oddly enough this never seems to occur on fresh installs. This is a docker host for pihole and home assistance, no other packages are really installed at all. I've not really tried much, but since this is a standard install, apt-get update & upgrade are about the only modifications outside of docker install that has occurred. 1. This plugs directly in to a Ubiquiti switch 2. I have tried a few differ…

• 0

  Reputation Points

• 3 replies
• 2.6k views

royk

September 21, 20233 yr

On RK3568 the Panfrost driver needs the clk-scmi kernel module to be loaded. But is not build in 6.18 / 6.19 otherwise we get [ 13.370681] panfrost fde60000.gpu: get clock failed -517 [ 13.370717] panfrost fde60000.gpu: clk init failed -517 [ 13.485723] panfrost fde60000.gpu: get clock failed -517 [ 13.485761] panfrost fde60000.gpu: clk init failed -517 [ 13.503876] panfrost fde60000.gpu: get clock failed -517 [ 13.503918] panfrost fde60000.gpu: clk init failed -517 Thanks !

• 0

  Reputation Points

• 1 reply
• 1.5k views

j0ta

May 8May 8

I am testing RK3288 with ubuntu 20.04 (gnome) btw NICE And I have some problems with panfrost and I am looking for anybody with RK3288 device that can confirm or not same behavior. Problem is that when I switch GPU to 600MHz sudo bash -c 'echo "userspace" > /sys/class/drm/card1/device/devfreq/ffa30000.gpu/governor' sudo bash -c 'echo "600000000" > /sys/class/drm/card1/device/devfreq/ffa30000.gpu/userspace/set_freq' and when I run glmark2-es2 or glmark2-es2-wayland I start to see https://pastebin.com/NuYqHdxH in kernel.log So I made bugreport(https://gitlab.freedesktop.org/mesa/mesa/-/issues/2693) for panfrost and the…

• 1

  Reputation Points

• 12 replies
• 10.6k views
• 2 followers

Myy

August 16, 20206 yr

With the vendor kernel, my logs are getting flooded with drm error messages Apr 13 17:04:05 kitchen-opi kernel: [drm:rockchip_vop2_mod_supported] *ERROR* Cluster0-win0 unsupported format modifier 0x800000000000062 Apr 13 17:04:05 kitchen-opi kernel: [drm:rockchip_vop2_mod_supported] *ERROR* Cluster0-win0 unsupported format modifier 0x800000000000062 Apr 13 17:04:05 kitchen-opi kernel: [drm:rockchip_vop2_mod_supported] *ERROR* Cluster0-win0 unsupported format modifier 0x800000000000062 Apr 13 17:04:05 kitchen-opi kernel: [drm:rockchip_vop2_mod_supported] *ERROR* Cluster0-win0 unsupported format modifier 0x800000000000062 Apr 13 17:04:05 kitchen-opi kernel: [drm:r…

• 0

  Reputation Points

• 2 replies
• 2.2k views
• 1 follower

OttawaHacker

April 18, 20251 yr

Any fixes for this? Some rock chip ICs need custom PCie overlay to set pcie speeds, maybe the kernel just has it set to gen 2? 0001:11:00.0 Non-Volatile memory controller: Micron/Crucial Technology Device 5421 (rev 01) (prog-if 02 [NVM Express]) Subsystem: Micron/Crucial Technology Device 5021 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 126 Region 0: Memory at f1200000 (64-bit, non-prefetchable) [size=16K] Capabil…

• 0

  Reputation Points

• 1 reply
• 1.9k views

laibsch

June 29, 20251 yr

Hi I installed a nvme SSD to my rockpro64 (with a generic PCIe adapter card). Somehow it only uses a x1 link instead of x4. I also observed the same behaviour with a x2 SATA card (only x1 link established). Output of lspci: LnkSta: Speed 2.5GT/s (downgraded), Width x1 (downgraded) To rule out hardware issues, I also tried the same setup with Manjaro-ARM which correctly negotiates a x4 link. LnkSta: Speed 2.5GT/s (downgraded), Width x4 dmesg for Armbian [ 2.221206] rockchip-pcie f8000000.pcie: host bridge /pcie@f8000000 ranges: [ 2.221296] rockchip-pcie f8000000.pcie: MEM 0x00fa000000..0x00fbdfffff -> 0x00…

• 0

  Reputation Points

• 4 replies
• 4.6k views

Nino

May 30, 20242 yr

I connected an OV13850 camera to camera port 3. After enabling it in device tree config, I still can't see it in v4l2-ctl and other camera apps. dmesg | grep ov13850 shows nothing.

• 0

  Reputation Points

• 7 replies
• 4.2k views

unDefFtr

February 26, 20251 yr

Hey My Tinker board is my first dev board and it runs damn hot, I saw this and it says its for the PI, can somebody in the know tell me if It would work on the Tinker Board please. I am running Armbian Ubuntu server temp fan control Thanks!

• 1

  Reputation Points

• 34 replies
• 19.9k views
• 1 follower

tkaiser

May 14, 20179 yr

I did a bit of reading - to prevent ubuntu packages to update the rockchip optimized packages, you need to pin the packages. There is a simple way to do that. 1. Create a file called rockchip-multimedia-ppu in /etc/apt/preferences.d with Package: * Pin: release o=LP-PPA-liujianfeng1994-rockchip-multimedia Pin-Priority: 600 2. Create a file called panfork-mesa-ppu in /etc/apt/preferences.d with Package: * Pin: release o=LP-PPA-liujianfeng1994-liujianfeng1994-panfork-mesa Pin-Priority: 600 You can verify that the apt configuration is working correctly with sudo apt policy chromium-browser which should return chrom…

• 0

  Reputation Points

• 5 replies
• 6.8k views
• 1 follower

OttawaHacker

January 27, 20233 yr

Hello, is booting SPI + NVME supported on RockPro64? If I use armbian-config and installing system SPI + NVME will not boot the system. When using SD (mmc) + NVME is OK. SPI + USB also OK. Thank you for your help.

• 0

  Reputation Points

• 2 replies
• 3.7k views
• 1 follower

piter75

December 28, 20196 yr

Is there any plan to port to the Pinebook Pro?

• 1

  Reputation Points

• 79 replies
• 39.7k views
• 10 followers

Igor

October 24, 20205 yr

I bought a Pinebook Pro two weeks ago. It came with Manjaro KDE preinstalled on EMMC. I wanted to try out Armbian, so I downloaded the Bookworm XFCE image from May 27th. In order to get the SD booted, I first flashed Tow-Boot for Pinebook Pro (pine64-pinebookPro-2021.10-005.tar.xz) from github Tow-Boot to the SPI. Then during boot after pressing ESC the menu lets you select the SD card for boot. The first boot to Armbian worked well. I could set up user, timezone and everything. The XFCE desktop looks very clean with a reasonable selection of software. Well done, team! But after I upgrade the system with apt update & upgrade, the next time the machine is b…

• 0

  Reputation Points

• 3 replies
• 4.2k views
• 1 follower

TRS-80

July 27, 20242 yr

Does anyone know the status of getting display to work over USB-C on Pinebook Pro? Thanks!

• 0

  Reputation Points

• 2 replies
• 3.1k views

lanefu

December 5, 20205 yr

Hi, I put the image on an SD card, but the machine fails to boot. Looking at the serial console, it just sits in a loop with the CPU constantly resetting after an exception. Serial console log is attached. Regards, Dianne. bootloop.txt

• 1

  Reputation Points

• 32 replies
• 14.1k views
• 1 follower

Hardware_hermit

August 28, 20242 yr

I know for sure that booting from an sd card and then using dd to write the uncompressed image to the emmc device isn't what works. I'm talking about Armbian_22.02.1_Pinebook-pro_focal_current_5.15.25_xfce_desktop.img here. Because that essentially bricked my PBP. I have the little adapter to connect the emmc to a usd slot, and using balena etcher to write to that isn't it either. the uboot in that image prevents booting from sd automatically as well, and i didn't find any uboot documentation that made it clear how to manually boot from sd, though i did hook up a serial console. This is what it said. The LED never turned green, the display flashe…

• 1

  Reputation Points

• 32 replies
• 24.7k views
• 3 followers

kgb

October 22, 20232 yr

Hi, I read everything I could possibly find on the DP-Alt mode for the RockPro64 and came to the conclusion that no Distro is offering that right now. However, the Pinebook Pro seems to have support via a Kernel Patch. Can the Pinebook Pro Kernel be installed on the RockPro64? Is there a repository for Armbian Kernels? Thanks very much.

• 1

  Reputation Points

• 14 replies
• 6.4k views
• 2 followers

going

July 21, 20242 yr

Hello! I don't really have a question, but just wanted to report I tried out the generic UEFI arm64 image on a Pinebook Pro, and it installed emmc and booted just fine! This was possible because I had installed Tow-Boot to the SPI flash, which supports UEFI booting. I had tried using the Pinebook Pro build of armbian, which worked fine when booting off the sdcard, but installing it to the emmc wasn't working. I'm using Tow-Boot 2021.10 then arbmian image Armbian_22.08.7_Uefi-arm64_jammy_current_5.15.74 . There's a few rough edges in the grub menu, but it boots the OS off the emmc just fine. Should the…

• 0

  Reputation Points

• 0 replies
• 3.8k views

morganwahl

October 30, 20223 yr

In fact all versions since kernel 5.10.?? are broken and stop at u-boot. Better the Uboot shall dive down and never ever come up to bother us. Finally I managed to install bullseye by using a buster image, deactivtion kernel upgrade and removed the armbian.list from /etc/apt/ Then I changed source list from buster to bullseye apt update apt upgrade -y apt full-upgrade -y thats it. And i is really a shame to fool the community by uploading untested software.

• 1

  Reputation Points

• 19 replies
• 9.4k views
• 1 follower

TRS-80

July 27, 20242 yr

I purchased a ROC-RK3328-CC from LovRPi.com. The ONLY OS available I can get to boot is Armbian, so this is important. This is a new install. Everything seems to work well enough except DNS. The browser can't resolve domain names, though it can access the various routers' IP's.. cat resolv.conf shows the head text and nameserver 127.0.0.53 I've tried editing the network connection, adding DNS servers, which had no effect except that systemd-resolve --status shows the correct DNS servers for eth0 (the wired connection). This cannot be altered by systemd-resolve --set-dns=[DNS Server IP]. It doesn't throw an error but neit…

• 0

  Reputation Points

• 6 replies
• 23.4k views

Johnny

November 21, 20187 yr

Hi, just installed 23.8.1 on my odroid M1, and I get poor network perf when using 1G port speed. iperf to another machine (iperf -c <server>, M1 sends traffic) gives the following: [ID] Interval Transfer Bitrate Retr [ 5] 0.00-10.00 sec 8.15 MBytes 6.84 Mbits/sec 631 sender [ 5] 0.00-10.04 sec 7.86 MBytes 6.57 Mbits/sec receiver reverse direction, M1 receives traffic: iperf -R -c <server> [ ID] Interval Transfer Bitrate Retr [ 5] 0.00-10.04 sec 1.10 GBytes 937 Mbits/sec 587 sender [ 5] 0.00-10.00 sec …

• 0

  Reputation Points

• 35 replies
• 13k views
• 2 followers

TrevorH

September 20Sep 20

Hello, I have roughly 30 Orange Pi 5 here in the office setting up for deploying in the field. NVMe boot is working great after using 'nand-sata-install' to flash the MTD. But sometimes (rarely, but happens), when issuing a reboot of Armbian, after full kernel shutdown, the player does not boot back up. Power light is on, no activity blinking LED. Network link and activity blinking. Just won't boot. Requires physically disconnecting power for a few seconds then re-plug to get to boot. I have watchdog set in Armbian and tested that works. So this seems to be before Linux kernel has taken control. Is there any way to enab…

• 0

  Reputation Points

• 33 replies
• 19.7k views
• 2 followers

nihilowy

March 27, 20242 yr

I've got jammy running but I have a dsi display for the board and I'd like that to work (well the tp port too) with jammy. Looking at armbian config I see no setting for it. I know the display works fine as if I load an aryufan android image it works as it is set to use DSI by default. Does this kernel know about the DSI port? Do I have to build a custom kernel? If not then what boot env line will get it going?

• 0

  Reputation Points

• 14 replies
• 8.6k views
• 1 follower

dkebler

January 7, 20233 yr

Hi! I need to make sure that my GPIOs remember the last state when my Tinkerboard reboots. Is it possible to modify the bootloader and avoid GPIO.cleanup? If yes, then how? Thanks!

• 0

  Reputation Points

• 0 replies
• 1.6k views
• 1 follower

SuperMaximus

September 15, 20233 yr

Hi, I've come from Joshua's 24.04 Server build. I was concerned that the support was dropping off as he's having a well deserved break. I've installed the latest Server build from here. https://dl.armbian.com/orangepi5-plus/Noble_current_server-kisak Works fine, have moved it to EMMC and removed the SD card. I use a USB power meter to see how much juice it uses. I noticed this build uses about 20 to 25% more when idle or under load compared to Josh's 6.1 kernel build. I am suspecting 6.12 has enabled more hardware in the OPi5+ and this is the reason. Is there a way to disable some of the HW to low…

• 1

  Reputation Points

• 10 replies
• 12.3k views
• 2 followers

Thewonderer

March 11, 20251 yr

I have a USB-C charger rated for 3A, USB-C Cable rated for 3A, and a USB-C to MicroUSB adapter rated for 2.4A. Should I even bother testing that?

• 0

  Reputation Points

• 1 reply
• 2.6k views

TonyMac32

October 25, 20178 yr

Hello! I would like to connect orangepi-4-lts to ili9341. I have new blank Armbian. $ uname -a Linux orangepi4-lts 5.15.52-rockchip64 #22.05.4 SMP PREEMPT I did overlay based on allwinner: /dts-v1/; /plugin/; / { compatible = "rockchip,rk3399"; fragment@0 { target = <&gpio1>; __overlay__ { ili9341_pins: ili9341_pins { pins = "PC7", "PD0"; function = "gpio_out", "gpio_out"; }; }; }; fragment@1 { target = <&spi1>; __overlay__ { status = "okay"; cs-gpios = <&gpio1 10 1>; ili9341: ili9341@0 { compatible = "ilitek, ili9341"; reg = <1>; pinctrl-names = "default"; …

• 0

  Reputation Points

• 4 replies
• 5.3k views
• 1 follower

Spartan

March 16, 20242 yr

Downloaded the image file Armbian_20.08_Rockpro64_buster_current_5.7.15_desktop.img. Using the Etcher utility, I burned the image to the SD Card. Installed SD Card in RockPro64. The system does not start. The exact same problem is observed with Armbian_20.08_Rockpro64_focal_current_5.7.15_desktop.img. If I write the Armbian_20.05.2_Rockpro64_buster_current_5.4.43_desktop.img image to the SD Card, then the system starts and installs normally. Then I use apt update and apt upgrade, as a result, the system is updated to version 5.7.15. I am trying to transfer the system to a connected SSD, after which the system stops booting. PS Sorry for my …

• 0

  Reputation Points

• 1 reply
• 3.1k views
• 1 follower

AlexVS

September 5, 20206 yr

Hi, I've installed Armbian_24.5.1_Rock-5b_bookworm_vendor_6.1.43_cinnamon_desktop.img on my Rock 5b and when I have tried to do apt update get error message with armbian.com url. (timeout error) I did all necessary and now it work fine. But for dev info, there is some problem probably with all Stable images.

• 0

  Reputation Points

• 3 replies
• 3.1k views
• 1 follower

Werner

June 6, 20242 yr

Problem 1 i just installed Operating system, and then used coding command sudo add-apt-repository ppa:liujianfeng1994/panfork-mesa sudo add-apt-repository ppa:liujianfeng1994/rockchip-multimedia sudo apt update sudo apt dist-upgrade sudo apt install mali-g610-firmware rockchip-multimedia-config to activate 3d accelerator. but it failed and an error appeared Errors were encountered while processing: /var/cache/apt/archives/mali-g610-firmware_1.0.0-1_all.deb E: Sub-process /usr/bin/dpkg returned an error code (1) https://ibb.co/0BhLJzm Problem 2 operating system can't mount exfat partition format so I used the following command sud…

• 0

  Reputation Points

• 7 replies
• 5.1k views

royk

February 17, 20233 yr

Hy, I have tried to use my tinkerboard like an hotspot. configuration done with armbian-config. when i used the armbian jessie ( ARMBIAN 5.73 stable Debian GNU/Linux 8 (jessie) 4.19.20-rockchip) : everything works IF i don't do an apt-upgrade. If i do an apt-upgrade or using the last img of armbian strectch, i cannot connect any devices to my Tinkerboard : here what i have when i used ssh to see what's wrong : Spoiler root@tinkerboard:~# Message from syslogd@localhost at Feb 20 01:22:35 ... kernel:[ 42.906202] Internal error: Oops - BUG: 0 [#1] PREEMPT SMP ARM Message from syslogd@localhost at Feb 20 01:22:35 ...…

• 1

  Reputation Points

• 16 replies
• 7.1k views
• 1 follower

dragonlost

March 21, 20197 yr

Hi, I do not konow, it this is the right place to raise this ticket. But in stable releases of Armbian it works fine, but there is no video acceleration. I have tried Kodi on Armbian Noble Gnome + trunk MESA/VPU: Armbian_24.8.0-trunk.85_Rock-5b_noble_vendor_6.1.43_gnome-oibaf_desktop.img Kodi falling when I'm trying to install some of extensions. For example https://repo.sc2.zone/ Crash log in the attachment. System log: 2024-06-05T12:01:28.534687+02:00 rock-5b kodi.desktop[3739]: Fatal Python error: PyImport_AppendInittab: PyImport_AppendInittab() may not be called after Py_Initialize() 2024-06-05T12:01:28.…

• 0

  Reputation Points

• 1 reply
• 2.8k views
• 1 follower

ozacas

November 10, 20241 yr

Hello all, I got a problem after new update of armbian firmware through your own module (script). The left USB port on pinebook pro has stoped working at all. Before that was occasionaly after 6 -7 boot ups only one time not working (it is used for mouse). Now after x rebooting it doesnt work at all. The right USB port works without problems. On the left, also USB flash drive doesn't work. No idea, what could it be? Before, as already said, it has worked in 90%. Before firmware upgrade.

• 0

  Reputation Points

• 6 replies
• 4.5k views

pinebookpro-owner

November 8, 20232 yr

Hello, I'm trying to install the zfs-dkms package with the latest build (Armbian_23.02.0-trunk.0127_Orangepi5_jammy_legacy_5.10.110_xfce_desktop.img.xz) and I get the following error: configure: error: *** This kernel does not include the required loadable module *** support! *** *** To build OpenZFS as a loadable Linux kernel module *** enable loadable module support by setting *** `CONFIG_MODULES=y` in the kernel configuration and run *** `make modules_prepare` in the Linux source tree. *** *** If you don't intend to enable loadable kernel module *** support, please com…

• 1

  Reputation Points

• 14 replies
• 10k views
• 2 followers

simonswine

January 21, 20242 yr

Hello, I'm using a rock pi e ver 3.0 with armbian 24.8.3: I would like to drive the state of a gpio, that of pin 7 or gpio 100: I'm not an expert and I tried to use the GPIOD libraries for python but I couldn't do anything because I get errors; from the command line through the gpiodetect command it seems to me that the chipset is recognized and I see some lines and the status of the gpios but I cannot change the status of these. Am I going in the right direction? Are there other methods to drive these GPIOs? Thank you in advance.

• 0

  Reputation Points

• 3 replies
• 3.2k views
• 1 follower

Werner

December 6, 20241 yr

I am using a Rock 5T 12GB board and have tested multiple Armbian images (24.04, 26.04, and others). Here is my experience so far: Armbian current images Audio does not work at all. When I plug in a 3.5 mm headset, nothing happens — no detection, no sound. Bluetooth works, Wi‑Fi does not. I have to manually compile the Realtek rtw89 wireless driver. After compiling, both Wi‑Fi and Bluetooth work, but still no audio output. Vendor (Radxa) images Audio works perfectly. When I plug in a headset, the system immediately detects it and asks whether it has a microphone. Sound o…

• 0

  Reputation Points

• 0 replies
• 848 views

Monsteroid

May 17May 17

Hi Guys, It seems that I can't boot latest Armbian image from SD-card - system always boots into "inintramfs". See the screenshot. SD-card is 100% working (all sectors tested). The image - 25.11.1_noble_6.12.58_gnome_desktop (downloaded from front page of OrangePi5). Checksum is OK. Please note - I've already tested 3 different prorgams for images: USB-imager, Rufus, Win32diskimager. Nothing helped))). I also re-wrote MTD flash (not sata) by "armbian-install" and got nothing (!) I use my main Armbian-server installed on nvme, but I would prefer to run SD-images as well... Unfortunately, as I see, this became very difficult task lately(((. …

• 1

  Reputation Points

• 6 replies
• 4.4k views
• 1 follower

peacepenguin

September 11Sep 11

Hello, The issue I describe below begins with a simple 1GB/s speed test with iperf3 (using tcp, then udp). With tcp everything is almost ok. With udp it's an other story. I first try through Internet and notice that there is connection drops. The network topology is : test computer => internet => router => switch (Mikrotik crs-326) => Rockpro64 The iperf3 server is on Rockpro64, and the client is on test computer. I then try to narrow down : - I connect directly to the switch and try again : in and out switch ports show near max speed (~1 Gbps), however the iperf3 server logs show 2 or 3 transfers at reduced speed, then show no tran…

• 0

  Reputation Points

• 0 replies
• 2.3k views
• 1 follower

arnaudf

August 19, 20233 yr

Hello community! Orange pi 4 LTS with Armbian 22.11 Jammy CLI, there is a problem with launching the screen with resolutions: 1024x600 - there is no image 1024x768 - the image is there, there are ripples 1920x1080 - everything is fine Tell me how to solve this problem. uname -a Linux orangepi4-lts 5.15.80-rockchip64 #22.11.1 SMP PREEMPT Wed Nov 30 11:12:47 UTC 2022 aarch64 aarch64 aarch64 GNU/Linux /boot/armbianEnv.txt verbosity=1 bootlogo=false overlay_prefix=rockchip fdtfile=rockchip/rk3399-orangepi-4-lts.dtb rootdev=UUID=72cc3f82-2e76-4495-99fd-8cc46a4a21db rootfstype=ext4 usbstoragequirks=0x2537:0x1066:u,0x2537:0x1068:u …

• 0

  Reputation Points

• 2 replies
• 4.2k views
• 1 follower

Igor

August 23, 20233 yr

Dear members, I was looking for a Noble Gnome-based image for NanoPi R4S, and only found one that is trunk-based, and had BIG RED letters stamped on it: DO NOT USE FOR PRODUCTION. Is there anything coming in that regard? Will we have a proper Noble Gnome-based release for NanoPi R4S? Thanks!

• 0

  Reputation Points

• 2 replies
• 3.7k views
• 1 follower

Janos Szigetvari

August 11, 20242 yr

Inspired by Bazzite OS, and remind me of experience on Armbian (not just armbian), basically on Orange PI 5/ OPI5+, it'll be solid OS if update failure/ anything went wrong can rollback to previous safe copy. Pain-point: I just want to use the system, not keep re-flashing OS. nixOS is good, but I don't want to re-learn everything ... and giving up my Ubuntu eco-system. Sorry I'm still testing out, and failing with existing Armbian-Config approach, I'm trying my own appraoch, Iknew the rules here, wait until I success I'll share it here. (note: or anyone did it before, can give me some direction) Inspired by Bazzite OS, and remind me of experienc…

• 0

  Reputation Points

• 2 replies
• 628 views

Boardcon_yang

September 8Sep 8

In our testing, when attempting to use various Wi-Fi mini-PCIe/M.2 adapters from Intel and Realtek, we've encountered problem: oftentimes OS will not see PCIe device with error "PCIe link training gen1 timeout". Some days it happens only in 1/10 boots, other days it can stop working completely. After long debugging we've found that 24-pin FPC cable that connects Orangepi and official connector board (PCIE-SOCKET-OPI4-4B) does not pass PERST signal from Orangepi. Instead, it is high by default and the only way to temporarily set it to low is by pressing physical button on connector board. As far as I understand, PERST signal basically tells the connected de…

• 0

  Reputation Points

• 0 replies
• 3.6k views

ArXen42

April 19, 20251 yr

Here in the forum the psu mod for the roc-rk3328-cc board was discussed. Does anyone know where I can find instructions on how to do this exactly?

• 0

  Reputation Points

• 0 replies
• 2.4k views

ska

March 28, 20233 yr

Been trying to enable multiple overlays on kernel 6.12 (orange pi 5) but I am not able to get any pwm device in /sys/class/pwm/ The i2c also seems to be missing. Is going back to 6.1 the safest option? Thanks

• 0

  Reputation Points

• 2 replies
• 2.1k views
• 1 follower

OttawaHacker

June 15, 20251 yr

I've setup the pwm overlay but while it shows up the pwm devices in /devices - it is missing the pwm0 control I've read couple posts where ppl have been able to override the overlays by decompiling the original one, but I can't make sense of the dtc dtb dtbo and dtsi files 😕 Any guides or other suggestions to fix the pwm control? Temperature and fan control on OPI5 - Orange Pi 5 / 5B / 5 Plus - Armbian Community Forums Rock Pi4 pwm control - no overlay? - Rockchip - Armbian Community Forums

• 0

  Reputation Points

• 1 reply
• 2.2k views
• 1 follower

OttawaHacker

July 23, 20233 yr

I'm trying to update python on my armbian bookworm to 3.12 but I cannot find any packages for bookworm. I regret not going with the ubuntu one now 😕 because that one has the deadsnake packages. Any known alternatives? (beside compiling your own packages)

• 0

  Reputation Points

• 2 replies
• 10.3k views
• 1 follower

OttawaHacker

March 6, 20242 yr

Greetings, On the tinkerBoard, I'm using python. I having difficulty understanding why the functions don't return the values that is expected according tho the library help. I'm using python3 and the ASUS GPIO library. import ASUS.GPIO as GPIO GPIO.setmode(GPIO.BOARD) This is the output from ipython: In [18]: help(GPIO.gpio_function) Help on built-in function gpio_function in module ASUS.GPIO: gpio_function(...) Return the current GP…

• 0

  Reputation Points

• 0 replies
• 2.7k views

iomari

September 25, 20197 yr

Hello folks, I happily run Armbian Jammy XFCE on my much beloved Meko box (with at least SOME hardware accel) and Bookworm on Orange Pi 5. Both run excellent, but Jammy/xfce is a bit more snappy. probably because of partly harware accell. On the Meko R3588 4Gb box I installed Docker, Portainer, MQTT server container, Home Assistant container. All is well. I operate my boxes via RealVNC, so that it also will work seemlessly when VPN is active. The containers are so extremely light that they hardly take a few percent CPU. Home Assistant container takes 0,5Gig or so, MQTT server takes 0.1Gig. My first encounter with docker is very positive! Next I will try to add open VPN an…

• 0

  Reputation Points

• 1 reply
• 3.9k views

royk

November 26, 20232 yr

I had use QML to made some soft, and when i move those soft to Tinkerboard, it's Incredibly slowly... have any idea to fix this? did tinkerboard had open gpu acceleration? do i must change back to use QtWidget?

• 0

  Reputation Points

• 0 replies
• 2.2k views

aitek

November 12, 20187 yr

Trying the Armbian Radxa Rock5T 25.5.1 / 6.1.115 Ubuntu server image for the Rock5T and I can't get the Quectel M2 EM12-G WWAN card to be recognized at all. I was previously running the Joshua Reik image and the card showed in lsusb on that image and worked, but I can't figure out why it's not working on this image. I'm kind of new to all this. I did find this similar thread but never found a resolution. https://forum.radxa.com/t/rock-5b-wwan-support-hardware-bug/25780 Hopefully someone can help as to what could be going on. Edit: Armbian Monitor Here: https://paste.armbian.com/avusulewax

• 1

  Reputation Points

• 5 replies
• 2.4k views
• 1 follower

swthpk32

August 9, 20251 yr

Hi, SD card did not load Armbian_25.8.1_Orangepi5_trixie_current_6.12.41_xfce_desktop. I noticed that in boot.cmd line 9 , rootdev is defined as /dev/mmcblk0p1. Should that be /dev/mmcblk0n1 or /dev/mmcblk0n1p1? I note that this file should not be edited and the armbianEnv.txt only refers to rootdev=UUID=7e27c862-0a39-41cd-891e-7d77ff7968fd. Is this an error or am I off course? If so where do I correct it? cheers

• 0

  Reputation Points

• 4 replies
• 2.2k views

mcfo

October 5, 20251 yr

Hi there, I wanted to know if anyone know if there are any power limits from the SATA power ports, the question is can you power 1 or more 3.5" NAS disks at the same time? Or as a precaution, I take power from the PSU? Thanks, Dany

• 1

  Reputation Points

• 3 replies
• 3.5k views
• 2 followers

ozacas

November 19, 20241 yr

I cannot get any CMA reserved space when I use latest LTS kernel (4.14): dmesg always says that no memory has been reserved for CMA. Is CMA working on mainline kernel for Mali Midgard? Is it required for 3D/video decoding stuff or the Mali kernel driver should instead allocate memory on-demand? I see that most of the kernel configuration options regarding CMA are disable or not set, which one requires to be enabled?

• 1

  Reputation Points

• 3 replies
• 3.3k views
• 1 follower

Myy

June 28, 20188 yr

Hi, I created a Tinkerboard OMV 4 image some while ago, we uploaded it untested (since 'OMV' just means Armbian's build system doing its job with a massive post processing script adding tons of stuff) but now got the report it doesn't boot. That's a bit surprising given that the image has been downloaded over a hundred times and no one complained so far. Deleting the image is the logical consequence but maybe someone here with a serial console can give it a try and report whether the board comes up or where it gets stuck at booting. http://kaiser-edv.de/tmp/jk4NM5/OMV_4_Tinkerboard.img.xz (with mainline kernel) or the default kernel variant from he…

• 0

  Reputation Points

• 3 replies
• 4.1k views

Tido

July 16, 20188 yr

I installed Armbian on my R4SE downloaded from https://redirect.armbian.com/nanopi-r4s/Bookworm_current_minimal Everything seems to work just fine, but I am missing my second network interface. Only the WAN interface is shown. Is there a software fix I can apply, or should it be fixed in the OS image? armbianmonitor -u output: https://paste.armbian.com/gipilapuve

• 0

  Reputation Points

• 2 replies
• 3.3k views
• 1 follower

Junkman

November 25, 20232 yr

Hi All I'm trying to use a microphone using the audiojack connector but without any success. Any help around that? I tried to search in the forum but didn't find any useful information regarding Radxa 5B Plus Thanks Erez

• 0

  Reputation Points

• 3 replies
• 3.8k views
• 1 follower

Igor

April 15, 20251 yr

I have Radxa 5B+ with 1TB nvme ssd. I installed Armbian minimal Bookworm on my nvme disk. IT starts without the SD card. Problem started few days ago when i run apt upgrade. After that, the machine don't start without SD card. I have tried to reinstall the machine several times, same happends. I also tried Armbian minimal Trixie, but there the machine don't start at all without SD card. So something have changed the last days. At the moment i have installed Bookworm again, and used the command "sudo apt-mark hold linux-u-boot-rock-5b-plus-vendor". Now the machine starts without SDcard, and i can use apt upgrade, but it is not a long term solution. Anyone have the s…

• 0

  Reputation Points

• 1 reply
• 1.9k views

Werner

December 15, 2025Dec 15

I have an Radxa 5B+ that are powered through POE HAT. The problem is that POE HAT fan does not work at all. I have to identical machines, same issue on both of them. I have installed Armbian minimal Bookworm on both, on nvme ssd.

• 0

  Reputation Points

• 2 replies
• 2.4k views

Werner

December 15, 2025Dec 15

Hi, I am not able to make Radxa Camera 8M to work with Armbian_24.5.3_Radxa-zero3_bookworm_vendor_6.1.43_minimal.img and Armbian_24.5.1_Radxa-zero3_noble_vendor_6.1.43.img gst-launch-1.0 v4l2src device=/dev/video0 io-mode=4 ! videoconvert ! video/x-raw,format=NV12,width=1920,height=1080 ! jpegenc ! multifilesink location=/home/a2t/test.jpg Pipeline is live and does not need PREROLL ... Pipeline is PREROLLED ... Setting pipeline to PLAYING ... New clock: GstSystemClock ERROR: from element /GstPipeline:pipeline0/GstV4l2Src:v4l2src0: Internal data stream error. Additional debug info: ../libs/gst/base/gstbasesrc.c(3132): gst_base_src_loop (): /GstPipeline:pipeline0/G…

• 0

  Reputation Points

• 5 replies
• 8.8k views
• 3 followers

Karl Kopf

March 14Mar 14

Dear all, I got myself an Radxa Rock 5 ITX+ as I thought I'd saw that this board had premium support. After it arrived, I saw that only the ITX (non-plus) variant had premium support, which since latest Armbian release some days ago seems to has been downgraded to standard support. I cleared both the eMMC and SPI flash to make sure the preinstalled OS were gone and would not interfere with the boot up process. Then I built myself a latest image with trixie and vendor kernel but I realized that (after booting from sdcard successfully), the Nvme was never picked up. The ITX+ has two M.2 full-size slots instead of only one - and is missing th…

• 1

  Reputation Points

• 2 replies
• 6k views
• 1 follower

nmaas87

September 21, 20251 yr

I have an interesting discovery that smells suspiciously like a kernel bug. I find it easiest to see this bug by running btop which shows a historical per core cpu usage graph so it's easy to see when one stops being used. You can see the same thing in ordinary top but it's less easy to see than with btop. I have a Radxa Rock 5B with an RK3588 chip that I have been stress testing to make sure the hardware is OK before I start to use it in anger. As part of that I ran `openssl speed -multi 8` to spin up 8 threads using 100% cpu each. On all other machines that I've ever done that with it runs all X cores at 100% until it runs out of tests or is Ctrl-C'ed. Watch…

• 0

  Reputation Points

• 14 replies
• 1.9k views

spry_plover44

September 19Sep 19

I am using :- [ Ubuntu 24.04 (Noble)](https://dl.armbian.com/rock-5b-plus/Noble_vendor_server) from :- [Radxa Rock 5B Plus - Armbian](https://www.armbian.com/rock-5b-plus/) Trying to turn fan on on Radxa Rock 5B+ selecting the device using armbian-config actually makes it disappear I am getting `line 3: echo: write error:Device or resource busy`

• 0

  Reputation Points

• 9 replies
• 5.9k views

赵泰淇

May 9May 9

I am trying to boot my Rock 5C Lite from an NVME drive, but have experienced some problems with the vendor kernel. I followed instructions by amazingfate in this forum to create a small SD card with a u-boot image, ie I created a complete Armbian image (vendor kernel) on an SD card too boot up the Rock 5c Lite A second, small capacity SD card was inserted into the USB port using a USB adapter U-boot was transferred from /usr/lib/linux-u-boot-*/ to the small SD card: dd if=./idbloader.img of=/dev/sda seek=64 conv=notrunc status=progress dd if=./u-boot.itb of=/dev/sda seek=16384 conv=notrunc status=progress …

• 1

  Reputation Points

• 2 replies
• 5.4k views

north1

November 20, 20241 yr

I got a radxa rock 5t and trying to install armbian(https://www.armbian.com/radxa-rock-5t), arimbian NOT boot and I can see the indicator light on the board is showing a steady green light. I boot with the official image https://docs.radxa.com/en/rock5/rock5t/low-level-dev/maskrom/linux and insert the sd card(with armbian img), and run such command, then I can boot armbian from SD card sudo dd if=/dev/mmcblk0 of=working_idbloader.img bs=512 skip=64 count=8000 sudo dd if=/dev/mmcblk0 of=working_u-boot.itb bs=512 skip=16384 count=8000 sudo dd if=working_idbloader.img of=/dev/mmcblk1 bs=512 seek=64 conv=notrunc sudo dd if=working_u-boot.itb of=/dev/mmcblk1 bs…

• 0

  Reputation Points

• 5 replies
• 4.6k views
• 2 followers

laibsch

August 8, 20251 yr

Login, type "sudo armbianmonitor -u" and copy the URL here. the command failed with the following error : /usr/bin/armbianmonitor: ligne 976: iostat : commande introuvable img used : Armbian_24.8.4_Rock-5c_bookworm_vendor_6.1.75-omv_minimal.img.xz hardware : https://docs.radxa.com/en/accessories/penta-sata-hat https://docs.radxa.com/en/rock5/rock5c 4 ssd samasung evo 870 The image works perfectly when flashed on a SD card and booting from the SD card, the Radxa pentaHat works, the disk are powered (green led for the hat, blue led per each disk). However, when the image is flashed on emmc, the OS boot normaly but the pentaHat does…

• 1

  Reputation Points

• 10 replies
• 8.5k views
• 1 follower

royk

November 17, 20241 yr

I have connected USB 3.0 4 port hub to the type c of my radxa zero 3E but lsusb -t shows the hub is only on USB 2.0 as 480M. /: Bus 06.Port 1: Dev 1, Class=root_hub, Driver=ehci-platform/1p, 480M /: Bus 05.Port 1: Dev 1, Class=root_hub, Driver=ohci-platform/1p, 12M /: Bus 04.Port 1: Dev 1, Class=root_hub, Driver=ohci-platform/1p, 12M /: Bus 03.Port 1: Dev 1, Class=root_hub, Driver=ehci-platform/1p, 480M /: Bus 02.Port 1: Dev 1, Class=root_hub, Driver=xhci-hcd/1p, 5000M /: Bus 01.Port 1: Dev 1, Class=root_hub, Driver=xhci-hcd/1p, 480M |__ Port 1: Dev 2, If 0, Class=Hub, Driver=hub/4p, 480M and lsusb output Bus 002 Device 0…

• 0

  Reputation Points

• 7 replies
• 6.7k views
• 1 follower

Ali Alaei

July 15, 20251 yr

I just testet all available stable armbian images with radxa zero 3e. when i turn off the machine with shutdown -h 0 or poweroff the system shuts down successfully but the power of the dc dc is not turned off. the 3.3V is still available. i dont know if its only a configuration mistake or a bug. normaly after a kernel shutdown, the driver for rk817 should send i2c package to reset the 817. after that you need a power cycle to recover and restart. https://paste.armbian.com/inibopomew br manuel

• 0

  Reputation Points

• 1 reply
• 2.8k views
• 1 follower

Pulsares GmbH

October 2, 20242 yr

Zero 3E, all images, same UUID/initramfs error on boot. Tried different flashing methods, sd cards. All the same fail. Board works with the old Joshua riek dist.

• 0

  Reputation Points

• 7 replies
• 2.7k views

Ary

July 11Jul 11

Hello I have this display http://www.lcdwiki.com/4inch_HDMI_Display-C and touchscreen doesn't work. I write dts file but apparently he is not a privelege and the touchscreen did not work. Can point out my mistakes when writing dts? rockchip-ads7846.dts

• 0

  Reputation Points

• 1 reply
• 2.9k views

robertoj

October 8, 20242 yr

hi After recent sudo apt update && sudo apt upgrade via armbian debian bookwork XFCE chromium and firefox breaks its not updates for chromium or firefox as happens when i hold those packages from upgrading too also on fresh sdcard flash/install without full upgrade(just upgrading chromium and its dependencies via depository) chromium still works fine, its something else in the depository that breaks it

• 0

  Reputation Points

• 3 replies
• 2.7k views
• 1 follower

Werner

November 16, 20241 yr

Good afternoon everyone. Please help me with my problem. I have a Radha board zero 3w and I use the Armbian distrib. 24.8.1 . Everything works fine, except that I can't activate SPI. In the Armbian-config menu there is no hardware section (I tried different flash cards and Armbian versions, the problem persists), I also tried to edit the armbianEnv.txt and add overlays there, but I also did not have success. Tell me what else I can try. Activation works on the native distribution radxa debian.

• 0

  Reputation Points

• 13 replies
• 12.5k views
• 1 follower

maximilian fletkar

October 2, 20242 yr

Bug Description eMMC is not detected on Radxa Zero 3W when booting Armbian Trixie from SD card. The eMMC controller initializes but fails to find power supply regulators, resulting in no block device being created. Hardware Board: Radxa Zero 3W (4GB RAM / 8GB eMMC) Boot media: SD card Image Armbian Trixie (current kernel) for Radxa Zero 3 DTB: rk3566-radxa-zero3.dtb Symptoms WiFi and SD card work fine eMMC does not appear in lsblk dmesg shows the SDHCI controller at fe310000.mmc loading but failing regulator lookups: sdhci-dwcmshc fe310000.mmc: Looking up vmmc-supply property in node /mmc@f…

• 0

  Reputation Points

• 2 replies
• 2.1k views
• 1 follower

EvilGenius

March 9Mar 9

This has happened now on identical brand new boards, new EMMCs, also on SD, identical 5a factory PSU, factory heatsink. OS is Armbian, and it has happened on current desktop and server. This last time I had completed several successful reboots and thought maybe I just hadn't been pushing the plug in all the way. Then it happened again. Prior attempts have been on EMMC, directly burned with Etcher, and brand new Sandisk Ultra in package with bubble. The behavior is while the board is running, white light flashing, system munching it just dies. Throws no errors. Just quits. Green light never goes out. I was tailing the emby log when it crashed this time. N…

• 0

  Reputation Points

• 1 reply
• 2.6k views
• 1 follower

DeterminedOpier

April 28, 20233 yr

Hi, I am trying to make the RPI camera ( OV7750 ) to work with the TInkerboard in Armbian. But there is no module in /lib/modules for this camera. Is it already compiled in the kernel? Currently it doesn't work.

• 0

  Reputation Points

• 1 reply
• 3.4k views
• 1 follower

chwe

November 15, 20187 yr

Hi. I have the official raspberry TV hat https://www.raspberrypi.com/documentation/accessories/tv-hat.html I'm wondering if I can use it on the Orange Pi. https://pinout.xyz/pinout/tv_hat http://www.orangepi.org/orangepiwiki/images/a/ac/Plus5-img302.png

• 0

  Reputation Points

• 0 replies
• 1.6k views
• 1 follower

Dome

January 7, 20251 yr

Expected behavior: rastered content is smooth like so: Observed behavior: rasterization is very pixelated: Workaround: go to about:flags and change #enable-gpu-rasterization to disabled, however this makes sites such as geogebra.org/calculator run very slow.

• 0

  Reputation Points

• 1 reply
• 1.7k views

Catloaf2019

May 1, 20233 yr

Hello! Iv'e just done a test run installing Armbian for booting off my new m.2 nvme drive. As 'm planning to have the drives 2nd large partition as my basic home file server I'm wondering if I can as easily re-install the OS if/when I need to update it to a newer one? Because the instructions I followed and that I see around do a very basic cat /dev/mmcblk1 > /dev/nvme0n1 onto the raw un-partitioned nvme. My case will be that I have data on a partition on that drive that needs to stay. Is this going to be an issue or are there ways to re-install Armbian or even other distro on the boot partition? Cheers!

• 0

  Reputation Points

• 2 replies
• 3.5k views

Fredrik

October 22, 20241 yr

How can I make sure my /boot is protected against power failure making eMMC of Tinkerboard corrupted? Is it possible to mount read-only /boot while leaving the rest of FS writeable? I know about Overlay root FS, it's OK, but I need to protect only boot. Please help to mount it properly. Thanks!

• 0

  Reputation Points

• 5 replies
• 4.1k views

CryBaby

March 27, 20233 yr

Hello, I have experimented with a Realtek USB 2.5Gbe USB Ethernet dongle and find that it works fine with the vendor kernel but not with kernels 6.12.x or 6.18.y. I have included an iperf3 example below, you can see that the dongle manages a few runs at high speed before it quietly fails and seizes up. I use a number of these dongles and they tend to work fine on other set-ups. Any thoughts about a resolution? dmesg output: [Tue Mar 17 11:37:00 2026] usb 2-1: new SuperSpeed USB device number 2 using xhci-hcd [Tue Mar 17 11:37:00 2026] usb 2-1: New USB device found, idVendor=0bda, idProduct=8156, bcdDevice=31.00 […

• 0

  Reputation Points

• 1 reply
• 2k views

schwar3kat

March 18Mar 18

Hey folks, im trying to compile a realtime kernel for mt orange pi 5. I plan to use it for djing. A fully preemptive kernel delivers better performance for this, as less xruns appear. I am following the official dev instructions and am using the docker method, Compiling only the kernel, not the entire armbian OS. I copied a realtime patch (actually I tried several sub versions of 5.10) from the kernel.org realtime project site into the userpatches directory (I looked up the correct orange pi 5 subfolder name but forgot it rn) but compiling throws me some errors. Has anyone succeeded in creating a kernel like this for the orange pi 5 and/or co…

• 1

  Reputation Points

• 22 replies
• 21.4k views
• 3 followers

Mr.Tree

December 19, 20241 yr

For the Rock PI S, what is the recommended gpio library? I tried using Radxa libmraa but encountered the following errors (using bullseye-stable): $ sudo apt-get install -y libmraa ... The following packages have unmet dependencies: libmraa : Depends: libjson-c3 but it is not installable Depends: python but it is not installable Depends: python2.7 but it is not installable Depends: libpython2.7 but it is not installable Depends: python3.7 but it is not installable Depends: libpython3.7 but it is not installable E: Unable to correct problems, you have held broken packages.

• 1

  Reputation Points

• 2 replies
• 3.8k views
• 1 follower

NaK

June 5, 20233 yr

Hello! I've been using Armbian on my newly bought Tinker Board for less than two weeks now and I've to say that the work you guys have put into this is incredible! It truly is remarkable and inspires us newcomers which haven't started studying computer science or are currently studying - as myself. So, I will definitely contribute and help others in the future to increase the Armbian community! However, as I'm new to Unix, Tinker Board, everything that's not Windows or Mac OS, I've a deep learning curve ahead! Let's start with my setup: Build: ARMBIAN 5.32.170921 nightly Ubuntu 16.04.3 LTS 4.14.0-rc1-rockchip (I know it's nightly so there are bugs, ye…

• 0

  Reputation Points

• 4 replies
• 3.5k views

Z11ntal33r

September 21, 20179 yr

Hi all, reporting a regression in new Armbian 24.2.1 kernel version. New kernel is causing Orange Pi 4 LPS not to boot most of the time, when it boots, then there is no network. Kernel hangs with oops errors on the screen, and all debugging stuff. Sorry that I did not caught any of them on my phone, but it would have been incomplete anyway. How to reproduce: Install any 24.2.1 based system on Orange Pi 4 LTS Upon first boot, you will have issues. No Ethernet network. Second boot will most likely not succeed no matter what you do and system will brick permanently, by not booting at all (no video output), or booting and then showing kernel crash. …

• 0

  Reputation Points

• 5 replies
• 4.3k views
• 2 followers

jock

April 5, 20242 yr

On the ROCK 5B+, I am getting the following error at boot [ 12.361648] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 12.389297] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 12.390688] cfg80211: Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600' [ 12.392699] cfg80211: loaded regulatory.db is malformed or signature is missing/invalid I believe this is the cause of being unable to set the regulatory region for WiFi. Running sudo iw reg get returns global country 00: DFS-UNSET even after running sudo iw reg set GB

• 0

  Reputation Points

• 3 replies
• 3.5k views
• 1 follower

MichaIng

June 1, 20251 yr

I have a Rockpro64 single board computer that I am trying to access remotely via an eMMC flashed Ubuntu iso image from here: https://www.armbian.com/rockpro64/, but keep getting the error message below. I was able to access the IP remotely from various laptops fine before by SSHing from the terminal, but after I failed at installing the program I wanted to install properly, I re-flashed the eMMC and have been getting this error ever since when accessing from other laptops (client-side) - I can SSH from the server-side fine with no issue FWIW. @ WARNING: REMOTE HOST IDENTIFICATION HAS CHANGED! @ @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@ IT IS POSSIBL…

• 0

  Reputation Points

• 1 reply
• 4.1k views
• 1 follower

martinayotte

August 19, 20206 yr

hw ver 1.0 and 1.3, both dwmmc_rockchip ff500000.mmc:Unexpected interrupt latency. fw Offical Armbian 22.02.1 Bullseye. Power Supply 5.5V/3A + microUSB cable, currect Voltage over microUSB port is 5.1V when load 3A. TF card is Samsung EVO orange.

• 0

  Reputation Points

• 0 replies
• 3.3k views
• 1 follower

PP88PP

April 12, 20224 yr

Armbian 21.08.1 Bullseye with Linux 5.10.60-rockchip64 power supply OK, sdcard OK, installed OMV. For this reason ,https://forum.armbian.com/topic/20237-renegade-aka-roc-rk3328-cc-usb30-not-work-properly/ , I 'freeze' armbian kernal upgrades to make USB-disk work properly. But, Either poweroff in CLI or in OMV panal, it always reboot.

• 0

  Reputation Points

• 0 replies
• 2.4k views
• 1 follower

PP88PP

April 12, 20224 yr

using latest Armbian: Linux indi 4.4.156-rockchip64 #21 SMP Wed Sep 19 13:14:57 CEST 2018 aarch64 aarch64 aarch64 GNU/Linux I can do the following (as sudo su), but, no voltage on the specified pin (pin 5, Linux pin 4): echo -n "4" > /sys/class/gpio/export echo -n "out" > /sys/class/gpio/gpio4/direction echo -n 1 > /sys/class/gpio/gpio4/value echo -n 0 > /sys/class/gpio/gpio4/value echo -n "4" > /sys/class/gpio/unexport I get no light on my generic LED with a 100k resistor - which lights when I move from pin 5 (Linux pin 4) MicroSD end of the board -> [ . . ] [ . . ] [ . . ] <…

• 0

  Reputation Points

• 6 replies
• 6.3k views

davembg

October 8, 20188 yr

I have two renegade SBCs, both of them flash armbian_22.02, one bullseye,another focal with xfce. Bullseye on hardware viersion v1.0, Focal on v1.3. They both can't discovery USB3.0 devices through USB3.0 which plug before boot. I installed openmediavault, setting up share folders on USB3.0 mobile disk, test it can work properly, then reboot. After reboot, Disk can't be discoveryed, light on disk bright but not flash. I keep waiting 30 minutes, no external disk be found. And, they can discovery devices on USB3.0 which plug after booted. But sometimes can't, only USB2.0 devices plug in USB3.0 port can be found. Example, I plug an USB3.0 di…

• 1

  Reputation Points

• 8 replies
• 7.7k views
• 2 followers

Shirish

September 3, 20224 yr

I'm running Armbian Jammy (23.02.2) aarch64, Xfce 4.16, Kernel: 5.15.93-rockchip64 on a Libre Renegade and would like to change the resolution to 1360x768. I have tried the Display Settings which only has 1280x720 and I can't change the scale, also I have tried changing the values in Settings Editor but that doesn't change anything. (DISPLAY=:0 xrandr -q) shows: xrandr: Failed to get size of gamma for output default Screen 0: minimum 1280 x 720, current 1280 x 720, maximum 1280 x 720 default connected 1280x720+0+0 0mm x 0mm 1280x720 0.00* I have limited experience with XFCE and terminal commands, any help is appreciated thanks.

• 0

  Reputation Points

• 6 replies
• 4k views
• 2 followers

armbird

June 22, 20233 yr

The Libre Computer Renegade RK3328 has hardware AES support. Should it not be listed by `lsmod` if the module is activated? $ grep aes /proc/cpuinfo Features : fp asimd evtstrm aes pmull sha1 sha2 crc32 cpuid Features : fp asimd evtstrm aes pmull sha1 sha2 crc32 cpuid Features : fp asimd evtstrm aes pmull sha1 sha2 crc32 cpuid Features : fp asimd evtstrm aes pmull sha1 sha2 crc32 cpuid $ lsmod | grep aes $ How can one verify that the AES chip is being utilized? I'm on the Armbian 22.11 Jammy release (Kernel 5.15.y, Release date: Nov 30, 2022).

• 0

  Reputation Points

• 3 replies
• 3.6k views
• 1 follower

MBC

October 26, 20232 yr

Tried booting a Renegade board with the Jan. 5, 2020 Buster Server Image. It appears that the eth0 is not starting. Switched to a Buster minimal from some time back, and at least the ethernet driver appears to be working.

• 0

  Reputation Points

• 5 replies
• 4.1k views

TonyMac32

January 24, 20206 yr

I have a Renegade ROC-3328-CC board, and trying to get the touch to work on the touchscreen (Typical resistive Touch screen 3.5" HDMI HAT type screen). I'm using the Armbian_5.75_Renegade_Ubuntu_bionic_default_4.4.174_desktop.img, and everything is working except the touch on the screen. Does anyone have success with this combination? By reading through topics on the forum, it seems to me that I need to be on the mainline kernel (since it has fbtft and ads7846 drivers), but I'm not finding any packaged images using mainline that will support his board. Anyone have a mainline Image for the Renegade? I tried the Tinker images whi…

• 1

  Reputation Points

• 2 replies
• 4.1k views

TonyMac32

March 16, 20197 yr

I've burned the latest Focal image onto Renegade board. Everything works fine except rebooting it via command. Once the reboot is entered, the console log showed it tried to reboot but stuck with the following info. The above Armbianmonitor is a zip file, please download it and save as zip file then unzip to get the detail log. I guess it was due to issue in dtb file but has no clue. Is there any genius can help on this? [ 97.418882] watchdog: watchdog0: watchdog did not stop! [ 97.672510] reboot: Restarting system INFO: PSCI Power Domain Map: INFO: Domain Nod State ON (0x0) INFO: Doma parent_node 0, State ON (0x0) e …

• 0

  Reputation Points

• 2 replies
• 3.4k views

Gorbovsky

March 9, 20233 yr

I recently added a monitor to my server as there were issues and I wanted to see logs directly on the OPi5. The monitor is part of the Motorola HD Dock. I'm using it for it's keyboard and monitor. In any case, the following messages appear in DMESG and keeps repeating ever second or two: [522074.762209] vop2_isr: 107217 callbacks suppressed [522074.762239] rockchip-vop2 fdd90000.vop: [drm:vop2_isr] *ERROR* POST_BUF_EMPTY irq err at vp0 [522074.762321] rockchip-vop2 fdd90000.vop: [drm:vop2_isr] *ERROR* POST_BUF_EMPTY irq err at vp0 [522074.762359] rockchip-vop2 fdd90000.vop: [drm:vop2_isr] *ERROR* POST_BUF_EMPTY irq err at vp0 [522074.762400] rockch…

• 0

  Reputation Points

• 0 replies
• 1.7k views

ArmBoy1988

April 17, 20251 yr