Rockchip

Hi everyone, New to the forum, so apologies if the questions are answered elsewhere, but please redirect me if they are. I have identified a bug in the `armbian-install` script in the current Bullseye Edge image (Dec 19,2022) that prevents it showing NVMe targets in the installation prompt if they don't have a valid filesystem on them. This appears to have been fixed on the 19th of December in this commit (the grep for filesystems was removed from the lsblk command that returns valid partitions). https://github.com/armbian/build/commit/893ed2347d97af574becf69dee1166a1bf933081#diff-8752ea87e0340f217187b70f7b08735d872a14c0467d02a6285222e594db3299L63…

• 0

  Reputation Points

• 1 reply
• 3.3k views
• 1 follower

Igor

January 31, 20233 yr

In order to enumerate the major issues that are *still* valid now, I'm creating a 'crash dump' thread. The idea is simple, if your RK3399 board crashed recently, you just : Write what happened during the crash; Provide the link you got from sudo armbianmonitor -u , after the crash happened; Provide the content of /var/log/kern.log (if this file is present on your system) (attach it or copy the content on pastebin and link it here). No discussion here. Feel free to create a new dedicated thread afterwards to talk about the problem you encountered. Minor issues are welcome too, if they trigger a BUG message in your logs…

• 0

  Reputation Points

• 0 replies
• 3.3k views

Myy

April 1, 20206 yr

I'm trying to use a TP-Link tl-wn722n with AR9271 chipset, but it only shows up in lsusb: Spoiler orange:~:% lsusb Bus 006 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 005 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 008 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 007 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 002: ID 0cf3:9271 Qualcomm Atheros Communications AR9271 802.11n Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation…

• 1

  Reputation Points

• 3 replies
• 3.3k views
• 1 follower

Netnax

July 10, 20242 yr

Is there a status page like http://linux-sunxi.org/Linux_mainlining_effort , but for Rockchip? (I suspect there's not. )

• 0

  Reputation Points

• 2 replies
• 3.3k views

richardk

February 15, 20197 yr

I've tried to reinstall multiple times. Armbian runs fine and i am able to SSH and do everything on it, but hdmi display plugged in gets no signal. I installed Armbian 22.11 Jammy XFCE and non. Both give me no output. I'm using a big enough power supply, and nothing. I am attaching the output i got on the armbianmonitor U http://paste.debian.net/1270237/

• 0

  Reputation Points

• 1 reply
• 3.2k views

Mr Finch

March 6, 20233 yr

My microphone is not working on armbian jammy gnome Device : Opi 5 16GB I tried to use command arecord -l I showed 1 sound card Named rockchip or something like it with similar name.

• 0

  Reputation Points

• 4 replies
• 3.2k views
• 1 follower

rbrisita

May 7, 20233 yr

I haven't tried Jammy with 6.1.43 but the kernel doesn't say rc anymore so curious of the status. How does this build compare in terms of feature and performance with 5.10? Is all the video decoding supported? The RK3588 Kernel support page says that hdmi audio is not supported - is that really the case? Is gnome/wayland supported? I see that only KDE is listed there.

• 0

  Reputation Points

• 1 reply
• 3.2k views
• 1 follower

Werner

April 12, 20242 yr

I build a kernel last night because I wanted a headless debian based system, not the nightly desktop available for download. Everything went well (almost*) until I tried installing NFS Apr 21 09:16:39 tinker1 rpc.idmapd[7408]: main: fcntl(/run/rpc_pipefs/nfs): Invalid argument Apr 21 09:16:39 tinker1 nfs-common[7394]: Starting NFS common utilities: statd idmapd failed! Apr 21 09:16:39 tinker1 systemd[1]: nfs-common.service: control process exited, code=exited status=1 Apr 21 09:16:39 tinker1 systemd[1]: Failed to start LSB: NFS support files common to client and server. -- Subject: Unit nfs-common.service has failed -- Defined-By: systemd -- Support: http:…

• 0

  Reputation Points

• 0 replies
• 3.2k views

chrisf

April 20, 20179 yr

hai, im planning to upgrade my local media server to use an external hard drive attached using hard drive docking on USB 3.0 what I'm confused about is. what is the best FileSystem format for my hard drive? I'm not planning to unmount and use the hard drive to another PC (for example: windows PC) So I'm ready to format it with FileSystem that fully optimizes on Linux (I'm using armbian noble) so ext4 or xfs? I hear xfs is better for copying large file sizes. my casual use is downloading movies, and watching it on jellyfin. or maybe I'm just using ext4?

• 0

  Reputation Points

• 1 reply
• 3.2k views
• 1 follower

Marco Schirrmeister

August 6, 20242 yr

Hi, I've been running Armbian legacy server on my 5+ for a month now. I had trouble initially with my EMMC not booting, but I discovered, I had to wipe the SPI Nor then using Armbian config to flash it, then write to EMMC. When a new version of Armbian comes out for the 5+ and it may be a 6.8 kernel build, will I need to re-flash the SPI before I can install the newer version of Armbian (or another image from that's not Armbian?) before updating the EMMC. I found the steps on the Radxa site insightful for a general overview of SPI Nor and flashing (I understand it not an OPi5 x board), but it's not clear to me if a different OS will ne…

• 0

  Reputation Points

• 0 replies
• 3.2k views

Thewonderer

February 16, 20242 yr

Can anyone point me in the right direction for an Armbian image that would allow audio recording over the 3.5mm jack? I'm trying to record audio over the 3.5mm jack. This works on a previous installation, but I'm trying to update to a curreent Armbian. Running Tinkerboard S R2.0 and this image: Armbian_25.2.1_Tinkerboard_noble_current_6.12.13_xfce_desktop.img Playback works record does not. Works: aplay /usr/share/sounds/alsa/Side_Right.wav -D hw:CARD=Audio,DEV=2 None of the following arecord commands work: arecord --vumeter=mono -D hw:CARD=Audio,DEV=0 -f S16_LE -c 2 -d 5 /tmp/t.wav arecord --vumeter=mono -D hw:CARD=Audio,DEV=1 …

• 1

  Reputation Points

• 3 replies
• 3.2k views
• 1 follower

danfoxley

April 7, 20251 yr

Anyone having luck getting firefox quantum to run? I added the ppa and installed it but it crashes immediately.

• 0

  Reputation Points

• 1 reply
• 3.2k views

freak

September 29, 20179 yr

Hi so there is a wip for RockPro64 but Kernel development and some other builds like MrFixIt have made gr8 advancement. Wondering if you could start support for rp64 or maybe update the wip since kernel has greatly improved.

• 0

  Reputation Points

• 1 reply
• 3.2k views

Igor

March 31, 20197 yr

I confess, I have no idea what to do with the contents of this repository. Any help would be great, as I've said before, my Linux experience is lacking on things, the work I do is usually in hardware with kiB of RAM... I'm working on the assumption that this would be the best lib to install, if I'm wrong, let me know. https://github.com/rockchip-linux/libmali

• 0

  Reputation Points

• 0 replies
• 3.2k views

TonyMac32

May 15, 20179 yr

While I was waiting for my OPI5 to arrive, I searched for which OS to install, in this search I found Armbian. ----------------------------------------------------------------------------------------------------- Armbian 23.02 Jammy "CLI" https://redirect.armbian.com/orangepi5/Jammy_legacy Size: 499M, Release date: Feb 27, 2023 ----------------------------------------------------------------------------------------------------- Armbian Bullseye "CLI" https://redirect.armbian.com/region/EU/orangepi5/Bullseye_legacy Size: 427M, Release date: Feb 27, 2023 ---------------------------------------------------------------------------------…

• 0

  Reputation Points

• 5 replies
• 3.2k views
• 1 follower

SteeMan

March 14, 20233 yr

Hi, i want to connect a MCP 2515 (the small modules for arduino) to my tinkerboard "Armbian 22.02.1 Hirsute with bleeding edge Linux 5.17.5-rockchip" I have enabled the SPI0 (and UART1) directly from armbian-config, I have disabled all the other peripherals. The connections are these: INT -------------> pin 32 CLK -------------> pin 11 SI ----------------> pin 13 SO --------------> pin 15 CS --------------> pin 29 in : /boot/armbianEnv.txt i add this: user_overlays=spi-mcp251x but it don't work and i can't find a guide for this board thanks a lot for your help

• 0

  Reputation Points

• 2 replies
• 3.2k views

MikeBaxter

June 8, 20224 yr

Have an incident where I tried installing a newer kernel in an nvme working setup and the device wont post. My original installation flash card is working but is giving me problems. So I got 2 others and attempted to boot new version of the image and Im getting no post. I was able to solve my original problem by installing a legacy version in flash and copying /boot over to nvme. I also attempted rebuilding the mme partitions with no success. But it seems that there is something not working right with kernel 6.7.

• 0

  Reputation Points

• 3 replies
• 3.2k views
• 1 follower

Werner

January 9, 20242 yr

I need to get a driver working on my ROC renegade with DKMS. However, the kernel headers provided by the repository: linux-headers-rockchip64 - Linux kernel headers for 4.4.156-rockchip64 on arm64 do not match the kernel provided by the repository: linux-image-rockchip64 - Linux kernel, version 4.4.162-rockchip64 This is after updating the cache just now and yes, both packages are installed. Is there some way I can guarantee that the version of my installed kernel and headers always match (apart from compiling them myself)? There is no linux-image-next package for rockchip64 and I'm hesitant to install the nightly release.

• 0

  Reputation Points

• 0 replies
• 3.2k views

liakhova

December 22, 20187 yr

I tested Armbian 24.5.1 Noble Gnome + trunk MESA/VPU Kernel: 6.6.31, Size: 1.3GB, Release date: May 25, 2024 on my PBP (sd card). What does not work: - Sound - HDMI Monitor on PB dock Thank you

• 0

  Reputation Points

• 0 replies
• 3.2k views

sepp

May 27, 20242 yr

Installing: /home/john/Armbian/development_armbian/build/output/debs/extra/jammy-utils/base-files_24.8.0-trunk-12ubuntu4.7-jammy_arm64__1-jammy-1armbian1-Baa17-U12ubuntu4.7-R55fa.deb [ base-files_24.8.0-trunk-12ubuntu4.7-jammy_arm64__1-jammy-1armbian1-Baa17-U12ubuntu4.7-R55fa.deb ] [🔨] '/home/john/Armbian/development_armbian/build/output/debs/extra/jammy-utils/base-files_24.8.0-trunk-12ubuntu4.7-jammy_arm64__1-jammy-1armbian1-Baa17-U12ubuntu4.7-R55fa.deb' -> '/home/john/Armbian/development_armbian/build/.tmp/rootfs-94f20e65-72ab-4c9f-aa58-4f9ea3a1974d/root/base-files_24.8.0-trunk-12ubuntu4.7-jammy_arm64__1-jammy-1armbian1-Baa17-U12ubuntu4.7-R55fa.deb' [🔨] E: Pa…

• 0

  Reputation Points

• 5 replies
• 3.2k views
• 1 follower

lay

October 13, 20241 yr

Hello to all, I am using an HDMI switch. I have noticed that TinkerBoard Armbian, displays fine the UBOOT text/logo but after that, the HDMI shows no signal/image If I connect the HDMI cable directly from the board to the monitor all is ok. What would be the reason or setting to be changed so TinkerBoard HDMI port can output display either case (hdmi direct to over a hdmi switch) tx in advance

• 0

  Reputation Points

• 2 replies
• 3.2k views
• 1 follower

2play

August 25, 20233 yr

Hi I would like to use the UART on physical pins 3 and 5 (https://wiki.radxa.com/RockpiE/hardware/gpio) Does anybody know how to activate it? There is an overlay uart4 but it doesn't do what I expected it to do :-) Thanks Chris

• 0

  Reputation Points

• 1 reply
• 3.2k views

Werner

February 14, 20215 yr

I have tried to get the CSI port working on my Radxa Zero 3W with the GEEKOM X1301 HAT, and now I can get the chip to show up in /dev, however there seems to be an issue when I try to access it, as I keep getting ioctl errors. I started by copying over the .dtbo files from the regular radxa official image, and putting them into the overlay-user folder in /boot. Then I enabled the radxa-zero3-tc358743.dtbo overlay, which gets the devices to show up. I am following this guide from GEEKOM https://wiki.geekworm.com/X1300_Software, however, I keep getting ioctl errors when trying to set the EDID file on the Radxa Zero. On the Raspberry Pi, this was not an issu…

• 0

  Reputation Points

• 0 replies
• 3.2k views
• 1 follower

opi-5-plus-user

November 7, 2025Nov 7

hello i just installed Armbian_5.59_Tinkerboard_Ubuntu_bionic_next_4.14.67_desktop on a new tinkerboard s .. and ran myself into a corner immediately. i was trying to figure out how to get 4K 2160p resolution instead of HD 1080p. i changed the refresh rate from 60Hz to 30Hz and now can't get the display back. i tried reboot. and documentation at https://docs.armbian.com/User-Guide_Fine-Tuning/ said to modify /boot/boot.cmd and that file says "edit /boot/armbianEnv.txt to set supported parameters" .. . so i set disp.screen0_output_mode=1920x1080p60 in armbianEnv.txt no luck .. i seem to have gone headless earlier than planned .. advice pls? i w…

• 0

  Reputation Points

• 1 reply
• 3.2k views

jmandawg

October 2, 20188 yr

In March 2023 I bought an OPI5 and immediately went for armbian, but I had problems and reported it in the link in this POST. in 2024: I bought the SD cards and other power supply directly from the manufacturers to see if the OPI5 works. I downloaded and burned the latest stable version of Bookworm and the results were the same, errors and everything froze. Before throwing OPI5 in the trash, I downloaded "nightly builds (unstable)" and installed it on an nvme and... it works without problems, I've had no problems for 13 days. In conclusion, the SD card reader is damaged and I can only use the NVME. HELP: I ask you for help with the command (.…

• 1

  Reputation Points

• 7 replies
• 3.2k views
• 1 follower

SteeMan

April 26, 20242 yr

Hello, I'm using a rock pi e ver 3.0 with armbian 24.8.3: I would like to drive the state of a gpio, that of pin 7 or gpio 100: I'm not an expert and I tried to use the GPIOD libraries for python but I couldn't do anything because I get errors; from the command line through the gpiodetect command it seems to me that the chipset is recognized and I see some lines and the status of the gpios but I cannot change the status of these. Am I going in the right direction? Are there other methods to drive these GPIOs? Thank you in advance.

• 0

  Reputation Points

• 3 replies
• 3.2k views
• 1 follower

Werner

December 6, 20241 yr

Im looking for a functioning, easy to install fan script for my RockPro64 installed with Armbian Jammy. Iv searched around and found a few unmaintained projects but Its not something iv ever done before so wanted to ask what others use. Although I do have some experience in the terminal I'm still relatively new to it so im hoping there is something with good step by step documentation. If anyone can assist Id be appreciative. Many thanks.

• 0

  Reputation Points

• 1 reply
• 3.2k views

joekhoobyar

October 25, 20223 yr

Hi all, looking for a bit of advise. I had an idea recently in that I have a problem of syncing a 20Tb USB 3.0 RAID0 drive with a 20Tb NAS. I have two fully duplicated RAID0 drives with no protection, so whenever I upgrade the capacity of a drive, I do a full sync. I do this maybe once a year. Whenever I have to do a full sync however it usually ties my MacBook up for a few weeks to transfer that much data over, so I had the idea recently of having a maker board do it since Linux/Armbian supports HFS+, I can just do an rsync between the two. I opted to purchase a Tinkerboard for the GigE Ethernet (I'll live with the USB 2.0), installed, up and running all…

• 0

  Reputation Points

• 1 reply
• 3.2k views

Igor

July 26, 20179 yr

Hi Team, I want to build or get pre-built armbian image for kernel 4.4 with wifi : rtl8723as enabled. Please help or provide any suggestion to build armbian image for rockpi-e. Any help or suggestion will be appriciated.

• 0

  Reputation Points

• 3 replies
• 3.1k views
• 1 follower

Bhavin

March 6, 20242 yr

Downloaded the image file Armbian_20.08_Rockpro64_buster_current_5.7.15_desktop.img. Using the Etcher utility, I burned the image to the SD Card. Installed SD Card in RockPro64. The system does not start. The exact same problem is observed with Armbian_20.08_Rockpro64_focal_current_5.7.15_desktop.img. If I write the Armbian_20.05.2_Rockpro64_buster_current_5.4.43_desktop.img image to the SD Card, then the system starts and installs normally. Then I use apt update and apt upgrade, as a result, the system is updated to version 5.7.15. I am trying to transfer the system to a connected SSD, after which the system stops booting. PS Sorry for my …

• 0

  Reputation Points

• 1 reply
• 3.1k views
• 1 follower

AlexVS

September 5, 20206 yr

I tried both the 6.8.10 and 6.1.43 releases from CI pipeline and none of these has the ap6275p wifi option in the armbian-config tool. There was a previous post that mentioned that the module got merged for the new kernels but is there an ETA to have this one in the CI releases? I'm curious to try vlc but haven't been able to install that one yet with the new releases.

• 0

  Reputation Points

• 3 replies
• 3.1k views
• 2 followers

Efe Çetin

May 28, 20242 yr

Hello, I tried to install the RTL8821CE card on Orange Pi 5 Plus, but only the Bluetooth is on, the wifi not working. Which driver i should use? I am using Armbian 24.2.1 Jammy with Linux 5.10.160-legacy-rk35xx here is the dmesg of admin@orangepi5-plus:~$ nmtui admin@orangepi5-plus:~$ dmesg | grep 8821 [ 5.588211] pci_bus 0003:30: root bus resource [mem 0x9c0000000-0x9ffffffff pref] [ 8.482106] rtw_8821ce 0002:21:00.0: enabling device (0000 -> 0003) [ 8.493940] rtw_8821ce 0002:21:00.0: Firmware version 24.11.0, H2C version 12 [ 8.534600] rtw_8821ce 0002:21:00.0: rfe 6 isn't supported [ 8.534719] rtw_8821ce 0002…

• 0

  Reputation Points

• 1 reply
• 3.1k views

ozacas

September 12, 20242 yr

Hi, I'm someone who's suffering with an unreliable pcie nvme upon booting. Apparently there was a patch for this issue. Unfortunately the whole time I've owned this device - doing a kernel update via armbian-config will just stop your device from booting and even outputting to the display. Is there a repo just with the precompiled kernels in .deb form?

• 1

  Reputation Points

• 2 replies
• 3.1k views

Turbine

November 14, 20223 yr

Hello, I am using the armbian kernel+uboot patchset of the rockchip-next (4.14.x) part to support Tinkerboard+TinkerboardS in an own home automation environment. U-Boot 2018.05 and kernel 4.14.53 are working fine so far with the current patchset published on GitHub (thanks for this great work!). However, the only issue I am still having is, that the ethernet port always comes up with "no-link" on the intial powerup of the Tinkerboard. As soon as I software reboot it after the initial powerup the ethernet port perfectly comes up with a link and I am able to setup all IP data, etc. But as soon as I completely power down the system and replug the power-cable it a…

• 0

  Reputation Points

• 2 replies
• 3.1k views

jmaus

July 7, 20188 yr

Downloaded Debian 13 (Trixie)Minimal / IOT kernel 6.18 onto SD and had it working 24/7 for about 2-3 days with no problems. I selected the option to copy the content of the SD card to an NVME, updated the MTD flash and set it as first boot option and now the device wont boot from nvme, SD or USB. How can I recover the unit?

• 0

  Reputation Points

• 2 replies
• 3.1k views

Fabricio Martínez Tamayo

February 25Feb 25

Hi, I've installed Armbian_24.5.1_Rock-5b_bookworm_vendor_6.1.43_cinnamon_desktop.img on my Rock 5b and when I have tried to do apt update get error message with armbian.com url. (timeout error) I did all necessary and now it work fine. But for dev info, there is some problem probably with all Stable images.

• 0

  Reputation Points

• 3 replies
• 3.1k views
• 1 follower

Werner

June 6, 20242 yr

i am taping in the dark here and in need of some help. i am running openhab on armbian 23.8.1 server and i need to get audio out on 3.5 jack for alerts. openhab has only two options system speaker and web audio. web audio plays on client like browsers using pulse audio. But if i use system speaker nothing comes out. What can i do to get sound on 3.5mm out on opi? is it even possible? i have this but this is also where my knowlege ends so help needed. aplay -l **** List of PLAYBACK Hardware Devices **** card 0: rockchipdp0 [rockchip-dp0], device 0: rockchip-dp0 spdif-hifi-0 [rockchip-dp0 spdif-hifi-0] Subdevices: 1/1 Subdevice #0: subdevice #0 card…

• 0

  Reputation Points

• 2 replies
• 3.1k views

Dim3nt0

January 23, 20242 yr

G’day guys, just grabbed a version of Armbian again to play around with on an orange Pi 5 I have had for a while. I have installed the latest stable (25.5.1 Noble Gnome). Everything went smoothly, and I have a 512GB ssd on the board, so I went through the install process using armbian-install. I managed to get the OS installed on the SSD, but when I went to install the bootloader, I got some error messages saying that the SPI image was not chosen. I followed the process for erasing the MTD, but still I got error messages relating to no spi image. I tried to boot from the ssd and just got a black screen. I downloaded Joshua Riek’s Ubuntu 24.04 dist…

• 0

  Reputation Points

• 2 replies
• 3.1k views
• 1 follower

vinrich

June 2, 20251 yr

Sorry, if this is not odroid specific but I don't know if this issue is a armbian generic one: I guess also in armbian running apt update && apt upgrade is the correct way to install updates? When I run that from a Armbian 23.02.2 system I will get a Ubuntu 22.04 afterwards. before: cat /etc/issue Armbian 23.02.2 Jammy \l after: lsb_release -a No LSB modules are available. Distributor ID: Ubuntu Description: Ubuntu 22.04.2 LTS Release: 22.04 Codename: jammy Similar question: What is the intended way to do an armbian upgrade? I did not find any hint in the documentation. In my current use case insta…

• 0

  Reputation Points

• 3 replies
• 3.1k views
• 1 follower

Werner

April 28, 20233 yr

Does anyone know the status of getting display to work over USB-C on Pinebook Pro? Thanks!

• 0

  Reputation Points

• 2 replies
• 3.1k views

lanefu

December 5, 20205 yr

I am trying to compile the Kernel on my PC with the Ubuntu recommended version. I get the error below: arch/arm/dts/rk3128-evb.dtb: Warning (avoid_default_addr_size): Relying on default #address-cells value for /syscon@20008000/usb2-phy@17c arch/arm/dts/rk3128-evb.dtb: Warning (avoid_default_addr_size): Relying on default #size-cells value for /syscon@20008000/usb2-phy@17c FATAL ERROR: Couldn't open "./u-boot.dtb": No such file or directory ./tools/mkimage: Can't read u-boot.itb.tmp: Invalid argument make: *** [Makefile:1053: u-boot.itb] Error 255 Any idea what this could be? It is the first time I am running ./.compile.sh potential…

• 0

  Reputation Points

• 1 reply
• 3.1k views

Werner

February 7, 20233 yr

VERSION=24.8.4 REVISION=24.8.4 Problems: No display. (access only via SSH) CIFS mounts fail Lots of dmesg messages similar to: ... [ 6.421534] rtk_btusb: disagrees about version of symbol module_layout ... [ 6.504179] uio: disagrees about version of symbol module_layout ... [ 376.377046] ipv6: disagrees about version of symbol module_layout ... [ 379.869911] cifs_md4: disagrees about version of symbol module_layout ... Is this problem known about?

• 1

  Reputation Points

• 3 replies
• 3.1k views
• 1 follower

robnielsen

October 24, 20241 yr

Banana Pi BPI-M7 with Rockchip RK3588, 8/16/32G,RAM 64/128G eMMC,wifi6 support . 2x2.5G port ,1xHDMIout ,2x USB3.0,2xTYPE-C,2x MIPI CSI interface and 1x MIPI DSI interface, 1x M.2 KEY M interface,40 PIN GPIO ,Mini size just 92x62mm. Hardware interface: online documents: https://docs.banana-pi.org/en/BPI-M7/BananaPi_BPI-M7

• 0

  Reputation Points

• 1 reply
• 3.1k views
• 1 follower

Lion Wang

June 18, 20242 yr

probably a post bragging of my christmas gifts, but mostly just documentation because it really confused and stumbled me from the get go so, my setup was powering tinkerboard (the first revision, without the new fangled eMMCs) via GPIO because it confused the hell out of me how to power this beast. this was powered through the XL4015 buck converter 12.1/12.2 V on input, with ammeter and voltmeter included on the board. (the board was current limited to 5A, because why not? the rk808 is 6A tops) ok from the get go the board powers (not load tested, just power through and run kodi-gbm UI) from 3.4V to 6.2V. undervolting or overvolting it doesnt shuts itself dow…

• 0

  Reputation Points

• 0 replies
• 3.1k views
• 1 follower

xAda

January 13, 20233 yr

Hi there Board, I have bought my Tinkerboard after some good research with my fellow techies at Red Hat and reading thoroughly that 19+pages Tinkerboard Thread. After crafting a super lean/mean kernel (kconfig at https://gist.github.com/rfrht/5f0fa113f12fbacf832e57ff4967785a ), I got a stable and lightweight kernel configuration. Things got a lot funnier when doing some compatibility tests with specific Asterisk versions, I was able to install and run cleanly a Raspi .DEB pkg. And that got me thinking. I have now JUST replaced the Raspberry Pi with the Tinkerboard. And guess what: It was a _inplace_ upgrade! Using the same u…

• 0

  Reputation Points

• 0 replies
• 3.1k views
• 1 follower

Rfreire

April 14, 20188 yr

My goal is to get OMV5 running on my RockPro64 (previously running OMV4 on an Ayufan image). I'm using this guide here from over on the OMV forum which suggests that Buster Server is the only thing that will work; this is based on the 4.4 kernel, and the suggested alternate of Buster Minimal is not present. I've tried downloaded from multiple locations and cannot get the SHA to match. The 256 per Checksum utility is 760BD8FA51316D07E875D5B8687E837C8C00070E68F44B8B413C76EC217C606B while the file from the Armbian download site is 3ddc7bc3e47bc39a9a9bed6109d35ca712bd34a6206121d37814ca8faf4b8798 If i try to flash the image to SD and boot device fails …

• 0

  Reputation Points

• 1 reply
• 3.1k views

Igor

September 22, 20206 yr

Hey guys, we are facing an issue we can not resolve ourselves so we are looking for some help on here... Our Rock Pi E does not restart successfully occasionally. Running the Rock Pi E with latest official Armbian with a USB soundcard attached. We are capturing audio and distribute the captured audio via "(c)VLC" via network. Since a few months we are facing reboot issues which are persistent but not easily reproducible. Whenever we reboot manually, everything works fine. When rebooting via cron it does often not reboot and get into a freeze state which makes it impossible to connect via SSH nor serial-adapter. We already tried switching the power so…

• 1

  Reputation Points

• 2 replies
• 3.1k views
• 2 followers

FabulousGee

November 12, 20241 yr

Hi, i want to disable the "rockchipminiarm" sound card: root@innotune:~# aplay -l **** List of PLAYBACK Hardware Devices **** card 0: Audio [USB Audio], device 0: USB Audio [USB Audio] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: Audio [USB Audio], device 1: USB Audio [USB Audio #1] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: Audio [USB Audio], device 2: USB Audio [USB Audio #2] Subdevices: 1/1 Subdevice #0: subdevice #0 card 1: rockchipminiarm [rockchip,miniarm-codec], device 0: ff890000.i2s-i2s-hifi i2s-hifi-0 [] Subdevices: 1/1 Subdevice #0: subdevice #0 I wanted to add the module of the soundcard into /etc/modprobe.d/blacklist but i…

• 0

  Reputation Points

• 0 replies
• 3.1k views

Hiabst

August 10, 20179 yr

Hello. In Armbian 5.34 (default, next and nightly (26/10/2017) no have permission for create, edit and delet conection on network manager. To be able to modify a connection it is necessary to open the network manager in root. It's really very exciting. Looking on the internet it turns out that it will be a problem of "policy". I had already reported this bug on the post "tinkerboard". He had been tuned to a nightly version but he came back. my account is in the group netdev and sudo like ask in the polkit Would it be possible to have a "next" version fix this bug or have the procedure to fix the error? thank

• 0

  Reputation Points

• 1 reply
• 3.1k views

dragonlost

November 8, 20178 yr

Hello, I am trying to create a custom uboot using armbian. it's possible? I am using the following command but I cannot generate the "uboot.bin" to save it to the spi: ./compile.sh uboot-config BOARD=orangepi5 BRANCH=current BUILD_DESKTOP=no BUILD_MINIMAL=yes BUILD_ONLY=u-boot CONFIGURATION=stable KERNEL_CONFIGURE=no KERNEL_ONLY=no PROGRESS_DISPLAY=plain RELEASE=bookworm UBOOT_ONLY=yes Thank.

• 0

  Reputation Points

• 1 reply
• 3.1k views
• 1 follower

Werner

June 17, 20242 yr

I was happy to find the Orange pi 4 armbian; it ignores raspbian an ubuntu images on sd and boots into android from its EMMC instead. The pi is an orange 4 LTS with 3gb RAM and 16gb EMMC. I have a 2tb crucial SSD attached through the usbc port. It is powered by a 4A supply through the DC port. it's purpose is to be a dedicated mythtv back end; it is wired by ethernet but also has wifi active. armbian-hardware-monitor.log is at https://paste.armbian.com/axayequliz it isn't showing up as a disk, as near as I can tell: the first is the EMMC, I believe, and the second my sandisk car…

• 0

  Reputation Points

• 1 reply
• 3k views
• 1 follower

dochawk

February 11, 20233 yr

i'm stuck with this since day 1 but now i upgraded to armbian (with kodi-gbm) i had this problem worse stress testing the board with stress -c 4 doesn't bring the board into shutdown, but logging in to kodi-gbm or using graphical interface? it brings instability all of a sudden. there's no inherent pattern from the shudowns except when i launch kodi or access some files (emby transcoding doesn't cause any instability). anything outside the text mode should cause it to shutdown. weirdly enough, when i removed the USB peripherals (2xUSB HDD, own power supply for both cases) the instability worsens and doesn't boot or sometimes reboot cycle after fsck.ext4 on sta…

• 0

  Reputation Points

• 1 reply
• 3k views
• 1 follower

xAda

January 13, 20233 yr

Hi guys I have experienced a lot of system instability with the rockpro64 on debian and armbian as explained here: https://forum.pine64.org/showthread.php?tid=17083 and here: https://github.com/monero-project/monero/issues/8473 I think the solution lies in what the guys are discussing here: https://forum.pine64.org/showthread.php?tid=7387 Can someone please give me a clear set of instructions on how to create an image to boot with with lowered ddr clock frequency? Presumably from the files listed here?: https://github.com/rockchip-linux/rkbin/tree/master/bin/rk33 i.e.: files such as rk3399pro_ddr_…

• 0

  Reputation Points

• 1 reply
• 3k views
• 1 follower

joekhoobyar

October 25, 20223 yr

What do I need to do to fix this error? Here is some information: root@orangepi5 ~# lsb_release -a No LSB modules are available. Distributor ID: Ubuntu Description: Ubuntu 22.04.2 LTS Release: 22.04 Codename: jammy root@orangepi5 ~# root@orangepi5 ~# uname -a Linux orangepi5 5.10.110-rockchip-rk3588 #23.02.2 SMP Fri Feb 17 23:59:20 UTC 2023 aarch64 aarch64 aarch64 GNU/Linux root@orangepi5 ~# root@orangepi5 ~# apt install -y bpfcc-tools libbpfcc-dev python3-bpfcc libbpfcc Reading package lists... Done Building dependency tree... Done Reading state information... Done The following additional packages will be installed: ieee-data libclang-cpp11 libllvm11 python3-n…

• 0

  Reputation Points

• 0 replies
• 3k views
• 1 follower

xiaoke

March 6, 20233 yr

I have 23.8.1 Jammy installed with kernel 5.10.160 and I'm getting plenty of kernel errors during any video playback, and these also cause the playback to freeze. From my research, these error messages come from librga - which I assume come from the panfork and rockchip repos but I was wondering if anyone has been able to resolve these errors.

• 0

  Reputation Points

• 0 replies
• 3k views

OttawaHacker

September 22, 20233 yr

for some strange reason the content of armbianEnv.txt (rootdev) is not applied in my opi5, if anyone can help me. Thank !!!

• 0

  Reputation Points

• 2 replies
• 3k views
• 1 follower

ozacas

August 18, 20242 yr

I get "DRM_IOCTL_PANFROST_CREATE_BO No space left on device", is 1GB RAM too little? Also the screen goes black when the app boots, is that a problem with X11/Wayland?

• 0

  Reputation Points

• 3 replies
• 3k views

laibsch

August 22, 20251 yr

I am experiencing an issue with my Rock Pi S. When using SPI1, I am not observing any CLK output signal on pin GPIO3_B3, which I have verified with an oscilloscope. Other signals such as MOSI, MISO, and CS are functioning correctly. I have found that this issue does not occur in the older kernel 4.4.143-65-rockchip-g58431d38f8f3. However, when using the latest Armbian 25.2.2 Bookworm Minimal / IOT image, this problem arises. Could someone please assist me in resolving this problem?

• 0

  Reputation Points

• 4 replies
• 3k views
• 1 follower

solaris3308

December 30, 2025Dec 30

Hi everyone. I’ve been facing some issues with my RockPro64 lately, running on a dedicated version of Ambian for this sbc. Earlier, I was using a USB Bluetooth module with it for playing audio on my speakers (via Logitech Bluetooth adapter), and it worked perfectly fine. I wanted to save some USB ports so I decided to replace the module with a ROCKPro64 1*1 Dual Band WIFI 802.11 AC/BLUETOOTH 5.0 MODULE. But ever since I’ve done that, the audio quality is choppy and inconsistent. Receiver and transmitter are located closely, so I don’t think it’s a signal issue. It seems like a hardware or a software issue, but I’m not sure what could it be. I’d appreciate any help with …

• 0

  Reputation Points

• 1 reply
• 3k views
• 1 follower

raphj

October 2, 20224 yr

I have updated my board to run on Armbian 24.11.1 with KDE. I am mainly using it to connect to my remote computer using RustDesk and I am notice that the fps I get is lower than when I was on 24.8.1. There I got around 25-30fps, but on the new version I can get max around 15. Are there any gpu drivers I can try or tests I should run in order to see how well the gpu performs? output from armbianmonitor - https://paste.next.armbian.com/recigaluza

• 0

  Reputation Points

• 3 replies
• 3k views

Egert

December 19, 20241 yr

Hello, i have a question about how to configure a 7' touchscreen, in my case i bought this: https://es.aliexpress.com/item/1005004163930837.html?spm=a2g0o.order_list.order_list_main.50.57c1194d914MA4&gatewayAdapt=glo2esp but the the problem is when i connect to my Orange Pi 5, on my laptop the screen works very well but in orange pi 5 with Armbian Jammy 23.5.5 Cinamon and it doesn't recognize it. Is there a solution on how to connect it?

• 0

  Reputation Points

• 3 replies
• 3k views
• 1 follower

maul7456

August 11, 20233 yr

Where can I find a link to the source git for What source code are the 5.4.23-rockchip64 kernels from?

• 0

  Reputation Points

• 2 replies
• 3k views

Igor

March 6, 20206 yr

hi, How to download armbian games？？

• 0

  Reputation Points

• 3 replies
• 3k views

lay

September 7, 20242 yr

Hi all, I have Armbian 22.08.6 Jammy with Linux 5.15.74-rockchip with Desktop running on an "Asus Tinker Board Rev. 1.2". My Problem is that I get no stable HDMI Connection. Picture is appearing and disappearing every few seconds. Changing Cable, Monitors, Resolution and Refreshrate doesn’t change the problem. After Research in the forum I saw that I should provide „armbianmonitor -u“ here: https://paste.armbian.com/oriqiwilah I would be able to compile a custom image, but I don‘t know where to start bugfixing because I am no HDMI Expert. Maybe it has something to do with a Sync-Problem like described …

• 0

  Reputation Points

• 2 replies
• 3k views
• 1 follower

Onelight

October 25, 20223 yr

Hello, I have set kernel.panic=180 in /etc/sysctl.conf to reboot on a kernel panic. Before, the system would keep running/hanging and I could read the errors if I turned on a attached display. Now the result is that the tinkerboard switches off. My expected result would be a reboot. Do I have to set something else? Or do I need to use watchdog? I am using the original tinkerboard with debian bullseye, kernel 5.15.48-rockchip.

• 0

  Reputation Points

• 2 replies
• 3k views
• 2 followers

tinker

August 26, 20224 yr

I wanna use tinker board to work with logitech c930e camera. when i use cheese to open camera in tinker board. it's just show one black picture, and the camera light is on. before i had use the nanopi m4 to work with the logitech c930e. it's working good. and m4 create /dev/video0 , /dev/video1. but tinker board just create /dev/video0, so i think it maybe inside kernel have some option not open. but i don't know which need open. i'm not good at kernel. can give me some help? thanks a lot

• 0

  Reputation Points

• 1 reply
• 3k views

aitek

December 15, 20187 yr

Which Os does support hardware encode h264\h265 ? Or where i can read about status supporting hardware encoding for video (h264\265) and image (jpeg) ? chip: RK3288

• 0

  Reputation Points

• 1 reply
• 3k views

TonyMac32

January 18, 20197 yr

Hi. I am using Khadas Edge 2 Rockchip RK3588S with Armbian Minimal version. I have installed xorg and firefox browser. After "startx" I rotated display (xrandr -o left) and run firefox. I don't know how is it calls, but I get a big gap when scrolling the website. In xrandr -o normal, it's gone. I will attach the video. Help me please. Thanks. IMG_0085.mp4

• 0

  Reputation Points

• 3 replies
• 3k views
• 1 follower

Ilya

October 12, 20233 yr

Just reporting that there is some tx-offload bug in the ASUS Tinker Board Rockchip. I think I read about this issue regarding other rockchip/platforms when checksum offload bugs on large packets. When I run ethtool -K eth0 tx off I stop having issues with NFS over TCP The last part of diagnosis is when I forced a NFS crash by enabling tx offloading.

• 0

  Reputation Points

• 0 replies
• 3k views
• 1 follower

Nitrax

April 12, 20197 yr

Good day, Dear! How to untag vlan_x to eth0 interface and untag vlan_y it to eth1 and wlan0 and enable igmp v2 support for iptv? Access Point created with armbian-config. Thank.

• 0

  Reputation Points

• 0 replies
• 3k views

ole.g

September 6, 20206 yr

I am using this image https://dl.armbian.com/rockpro64/nightly/Armbian_5.82.190422_Rockpro64_Debian_stretch_dev_5.0.0.7z Board start only without wifi & pcie. But i got this error. https://pastebin.com/gq2DpXaF

• 0

  Reputation Points

• 0 replies
• 3k views

FrankM

April 22, 20197 yr

There's an issue with Panfrost and Mesa 19.3 that causes X11 to crash in "OsLookupColor" which you may run into on Armbian on RK3399 devices; it can be solved by enabling the experimental branch in your /etc/apt/sources.list by adding the following line: deb http://deb.debian.org/debian experimental main contrib non-free You can then run 'apt update' and install experimental branch packages with 'apt -t experimental install <package>'. To fix the crash in X11, update the following from experimental: libegl-mesa0 libgbm1 libgl1-mesa-dri libglapi-mesa libglx-mesa0 mesa-va-drivers mesa-vdpau-drivers mesa-vulkan-drivers This should allow X11 …

• 0

  Reputation Points

• 0 replies
• 3k views

Neko May

March 12, 20206 yr

Anything targeting the mainline will be getting 4.12 tonight, I can confirm some patch failures for Tinker Board/MiQi NEXT, Specifically: 0002-Adaptation-ARM-dts-rockchip-fix-the-MiQi-board-s-LED Was patched in the kernel. 9002_dts_rk3288_updates - Fixed and the packaging postinstall-scripts patch specific chunk: scripts/package/builddeb There is no "Provides:" statement.

• 0

  Reputation Points

• 0 replies
• 3k views

TonyMac32

May 15, 20179 yr

Hi all, I’m new to this whole SBC thing, and I recently got an Orange Pi 5. I first installed the official OS (Ubuntu), where I needed to do into orangepi-config and go into System > Hardware > wifi-ap6275p and enable that to use the official M.2 WiFi dongle. However, I don’t see this option on Armbian. Does it not support it?

• 0

  Reputation Points

• 1 reply
• 2.9k views
• 1 follower

Igor

February 18, 20233 yr

Hi, rockpro64 Linux rockpro64 4.4.174-rockchip64 #16 SMP Sun Feb 10 16:50:35 CET 2019 aarch64 aarch64 aarch64 GNU/Linux as root: # btrfs qgroup show / --> ERROR: can't list qgroups: quotas not enabled (thats not the problem) but a dmesg BTRFS error (device sda1): could not find root 8 occurs .. There is a old (2015) discussion about a missing group (create a dedicated qgroup ioctl) https://www.spinics.net/lists/linux-btrfs/msg49628.html https://www.spinics.net/lists/linux-btrfs/msg49635.html May you have a idea ?! Best regards - and you make a great job! …

• 0

  Reputation Points

• 0 replies
• 2.9k views
• 1 follower

webstudio

February 12, 20197 yr

Has anyone successfully migrated from 23.2 (stable) to 23.5 (stable)? Is that scenario possible today? I'm looking to get the Bluetooth working, I know it has been fixed in 23.5 but that one is currently broken.

• 1

  Reputation Points

• 3 replies
• 2.9k views
• 1 follower

Werner

July 20, 20233 yr

Installed the desktop version of Armbian (bionic) on Asus Tinker Board S and noticed that the GPIO Pin 40 is always high on boot up. Please let me know whether this is high by default for any reason and if possible how to set it to Low while start up.

• 0

  Reputation Points

• 0 replies
• 2.9k views

Arun

August 6, 20197 yr

Good Morning, I'm using Libre renegade with armbian bullseye minimal. How can I change splash screen, replacing the armbian logo and 4 penguins, with a personal one? Has anybody done it eralier? Thanks in advance

• 0

  Reputation Points

• 0 replies
• 2.9k views

Fra

June 27, 20224 yr

the issue is as follows: 1. When using the Type-C interface to connect to an external monitor, the display works normally if the monitor is connected after the development board has started. 2. If the monitor is disconnected and then reconnected after approximately several hours (possibly more than 6 hours), the display fails to show any image. I used the `armbianmonitor -u` command, and it output the following URL. https://paste.armbian.com/foyecusoju If the Type-C interface is functioning normally, the latest output from `dmesg -w` would show the following: [ 1155.922647] xhci-hcd xhci-hcd.15.auto: xHCI Host Controller [ 1155.922692]…

• 0

  Reputation Points

• 1 reply
• 2.9k views
• 1 follower

The Tall Man

September 24, 20251 yr

I finally successfully got Armbian installed on my Pinebook Pro's eMMC. That should be giving it its best possible performance. I thought you may all be interested in compiling a list of games that work at least reasonably well on it given its restrictions of being ARM64 architecture, 1.8GHz CPU & 4GBs RAM. So to start here is a list of the ones I currently have on mine. I may try more later but for now I'm limited by the stock 64GB eMMC that the PCP came with... 0AD - 3D RTS Cave Story - Pixel Art Metroidvania Dr Robotnik's Ring Racers - Kart Racer Dune Legacy - RTS Endless Sky - Space Sandbox Flare - Fantasy RPG Freeciv - St…

• 0

  Reputation Points

• 8 replies
• 2.9k views

Bruno Piras

June 17Jun 17

I have built an Orange Pi 5 Plus systems. I have a 256gb eMMC card which seems to run as speed would expect. Yet when I test the NVMe drive I get slow speeds compared to what is suggested to get. I have seen other people posts that suggest they are getting at least 4gb/s using NVME drives. I have searched for other issues but there is no errors in the logs just can't get the speeds I was expecting. I have the following which suggests at least 5gb/s KINGSTON SNV3S500G I have formatted it using Ext4. root@orangepi5-plus:/boot# hdparm -Tt /dev/nvme0n1 /dev/nvme0n1: Timing cached reads: 2804 MB in 2.00 seconds = 1404.10 M…

• 0

  Reputation Points

• 3 replies
• 2.9k views

ozacas

December 14, 20241 yr

I use the spi0 of Renegade to drive a 3.5-inch touchscreen, both the lcd and touchscreen use the same spi0, but different "CS". If I don't touch, the display is ok. But when touch the screen, the display gets messed up, looking like the colors are misaligned starting from an offset value. Anybody has experience of it ? Thank you! (The first and second images get messed up as I touch on screen, the third image is ok as I don't touch.)

• 0

  Reputation Points

• 1 reply
• 2.9k views

DavidJS

May 17, 20224 yr

Hello, thanks for supporting this device I'm trying to install pivccu (homematic smarthome) on armbian to use it with homeassistant. It's not officially supported (yet) but I got it running with the default hardkernel ubuntu image. https://github.com/alexreinert/piVCCU/blob/master/docs/setup/armbian.md I can't seem to find the kernel headers/sources for my kernel. Any Ideas? Below is what I found. I'm willing to go back to 6.1.12 if that doesn't cause any issues. Can't do it via armbian-config. Do I need to download an image from the archive and reinstall? uname -a Linux odroid 6.3.4-rk3568-odro…

• 0

  Reputation Points

• 0 replies
• 2.9k views
• 1 follower

armbee

August 14, 20233 yr

I upgraded my 5.10 install to 6.1 kernel got everything working including wifi using armbian-config - change kernel but after I noticed that video acceleration was broken with vlc I decided to rollback. The initial rollback somehow failed, after some tweaking, I've been able to boot the system again and run kernel 5.1 but now I don't have my ap6275 working anymore and the video acceleration modules from 5.x seem to be gone. I have the overlay for the ap6275 but it is not loading any module. What am I missing?

• 0

  Reputation Points

• 2 replies
• 2.9k views
• 1 follower

ioncube

July 25, 20242 yr

I got a 6.1 noble minimal image installed with a latest kubuntu update to KDE 6. Was quite some work to get this all working. But some thing aren't working (e.g. audio?). 6.12 and later supports a range more peripherals. I tried the non-vendor images but no go. How do I install one of those? (Not using ROOBI, I hacked this to use my own)

• 0

  Reputation Points

• 2 replies
• 2.9k views
• 2 followers

Jurgen.Schober

June 2, 20251 yr

Does anyone know what to do to enable 1920x1200 resolution? I've done the xrandr newmode/addmode and it shows in the display app but doesn't work. At the command line... xrandr --output HDMI-1 --mode 1920x1200_60.00 xrandr: Configure crtc 0 failed The monitor and tinker board support 1920x1200 and it works with tinkeros.

• 0

  Reputation Points

• 0 replies
• 2.9k views

freak

September 22, 20179 yr

Hello I have this display http://www.lcdwiki.com/4inch_HDMI_Display-C and touchscreen doesn't work. I write dts file but apparently he is not a privelege and the touchscreen did not work. Can point out my mistakes when writing dts? rockchip-ads7846.dts

• 0

  Reputation Points

• 1 reply
• 2.9k views

robertoj

October 8, 20242 yr

Hello, I have an orange Pi5, i had installed armbian a few years ago and everything was working fine. Roughly one year ago i turn it off and kept off until now. A few days ago I tried to turn it on again and i've inserted a new sd card containing armbian but it doesn't boot. I've re created the sd card a few times and also used another sd card because i was thinking something was wrong with the card. The board turn on but i got only the red led, and is stable. Searching on internet i found that maybe the Orange Pi is bricked, so i tried to use the MaskRom and Recovery button, but nothing happen. Also i'm not able to see the board inside the RKDevTool, neithe…

• 1

  Reputation Points

• 16 replies
• 2.9k views

Simo

September 14Sep 14

I have a latest ubuntu armbian on a pinebook pro, I use an DUB-1312 gigabit to usb 3.0 for wired connection, I plug it in the usb 3 port of the pinebook but I run iperf I see the same speeds as the other usb 2 port. $ iperf3 -c 192.168.0.34 Connecting to host 192.168.0.34, port 5201 [ 5] local 192.168.0.33 port 48140 connected to 192.168.0.34 port 5201 [ ID] Interval Transfer Bitrate Retr Cwnd [ 5] 0.00-1.00 sec 41.7 MBytes 350 Mbits/sec 0 298 KBytes (More thread only made results worst) While the same DUB-1312 plugged in my amd64 ubuntu computer achieve 950Mb/s easly (capped by the other testing device (an odroid-hc1)). …

• 0

  Reputation Points

• 0 replies
• 2.9k views

Jorropo

May 22, 20206 yr

hey all, I have been running three Rock 5B+ for some time now with Proxmox arm port, and last night I did a kernel update to the latest, and now all three SBC are running extremely slow, PVE does not load, and there are a bunch of system errors (see below). I tried going back to an older kernel, but the same errors remain. any thoughts? Aug 18 07:13:00 PMOX2 kernel: rk806 spi2.0: no dvs-setting pinctrl state Aug 18 07:13:00 PMOX2 kernel: cpu cpu0: Failed to get specification_serial_number Aug 18 07:13:00 PMOX2 kernel: cpu cpu0: Failed to get specification_serial_number Aug 18 07:13:00 PMOX2 kernel: cpu cpu0: Failed to ge…

• 0

  Reputation Points

• 2 replies
• 2.9k views

bhouseski

August 18, 20251 yr

Dear Armbian community, Yesterday morning, after apt upgrade my Rockpro64 not boot (the white and red led stayed lit). After some tries I managed to get a boot again but I now have a "init not found" error, as you can see on the screenshot. What have been done so far : - Install an Ubuntu as "debug" platform - Follow the recovery steps from Armbian website - Put on eMMC storage a 5.15.63 by copying the files from Armbian - Check if UUID was consistent between partition, boot config, ... ==> this is the case - Made a fsck : no errors found ==> I would like to try this : https://askubuntu.com/questions/…

• 0

  Reputation Points

• 1 reply
• 2.9k views

arnaudf

November 1, 20223 yr

Kind people： How to modify the default swap partition size in the configuration file and compile the firmware？？ help help

• 0

  Reputation Points

• 2 replies
• 2.9k views

lay

May 22, 20251 yr

Hello All, Do you also have this kind of messages in syslog ? [ 1601.687044] ------------[ cut here ]------------ [ 1601.687070] WARNING: CPU: 2 PID: 112 at drivers/gpu/drm/rockchip/rockchip_drm_vop2.c:2986 vop2_crtc_load_lut+0x54/0x310 [ 1601.687075] Modules linked in: bnep zstd joydev sch_fq_codel fuse ip_tables ipv6 r8152 panfrost gpu_sched [ 1601.687114] CPU: 2 PID: 112 Comm: kworker/u16:1 Tainted: G W 5.10.110-rockchip-rk3588 #trunk.0184 [ 1601.687117] Hardware name: Orange Pi 5 (DT) [ 1601.687127] Workqueue: events_unbound commit_work [ 1601.687134] pstate: 40c00009 (nZcv daif +PAN +UAO -TCO BTYPE=--) [ 1601.68713…

• 0

  Reputation Points

• 5 replies
• 2.9k views

eshelton

February 4, 20233 yr

Hi there, I'm really happy with Armbian on my Oprange Pi 5 Plus but recently I noticed that I'm not getting kernel updates so often as before. I use rockchip-edge branch and I'm stuck at kernel "6.18.0-rc6-edge-rockchip64". I know there are new versions being tested (https://github.com/armbian/os/pkgs/container/os%2Fkernel-rockchip64-edge), will they be released to armbian? Maybe you are working hard on Armbian version 26.2 and I'm just anxious Thanks in advance!

• 1

  Reputation Points

• 1 reply
• 2.9k views

Werner

January 21Jan 21

I have issues enabling hardware acceleration on Debian CLI, anyone had same problem? can someone give a tutorial?

• 1

  Reputation Points

• 5 replies
• 2.8k views
• 2 followers

Werner

April 9, 20233 yr

After enabling the rk3588-hdmirx overlay in armbian-config device tree overlays, whenever I boot, I am greeted with multiple hdmirx (fdee0000.hdmirx-controller: hdmirx_wait_lock_and_get_timing HDMI pull out, return!) errors on boot. On a previous install, the hdmirx errors would block the entire boot process and it would just hang forever. I do not know the exact cause, but the issues seemed to arise after I ran this command to disable the X Display Server "systemctl set-default multi-user.target". The errors could only be resolved if I plugged in the sd card into another device and removed rk3588-hdmirx from overlays in /boot/armbianEnv.txt . …

• 1

  Reputation Points

• 3 replies
• 2.8k views
• 1 follower

Werner

July 19, 20251 yr

today I flashed armbian in my Asus TB and WiFi was working but only for first boot now I am facing this problem ifconfig wlan0 up operation not permitted

• 0

  Reputation Points

• 2 replies
• 2.8k views
• 1 follower

TonyMac32

July 23, 20188 yr

Hello ! Not found any devices How to make it work? hciconfig -a hci0: Type: Primary Bus: USB BD Address: E8:48:B8:C8:20:00 ACL MTU: 1021:6 SCO MTU: 255:12 UP RUNNING PSCAN RX bytes:1537 acl:0 sco:0 events:148 errors:0 TX bytes:3430 acl:0 sco:0 commands:136 errors:0 Features: 0xff 0xff 0xff 0xfe 0xdb 0xfd 0x7b 0x87 Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3 Link policy: RSWITCH HOLD SNIFF PARK Link mode: PERIPHERAL ACCEPT Name: 'orangepi5' Class: 0x000000 Service Classes: Unspecified Device Class: Misce…

• 0

  Reputation Points

• 1 reply
• 2.8k views
• 1 follower

Michael Robinson

March 22, 20242 yr

Linux 4.4.163 has been released since the 10th of November, but the builds on the 13th and 15th are still only showing 4.4.162. I use your builds because they're awesome, they get me the latest patches. I hope 4.4.163 is included soon

• 1

  Reputation Points

• 1 reply
• 2.8k views

Igor

November 16, 20187 yr

Hello, running Armbian_22.11.2_Odroidm1_bullseye_edge_6.1.0.img.xz + updates. I saw in other post (/topic/17418-cameras-with-rock-pi-4-c/😞 But I do not see any Hardware menu in System. I had a look to armbian-config and saw that there is a lot of device-specific code and probably odroidm1 is not supported yet. Also I searched for some DTB that may work, but none is shipped with the current kernel: is empty. Should I add explicit support like in this patch: https://github.com/armbian/build/pull/1482/files? Or there are more modern way to add cold-pluggable hardware? Thanks in advance for your suggestions!

• 0

  Reputation Points

• 0 replies
• 2.8k views
• 1 follower

dondon

February 22, 20233 yr