Rockchip

I'm using Armbian_5.32.170920_Tinkerboard_Ubuntu_xenial_dev_4.13.0_desktop.img (yes I know it's a nightly) and it works great. However if I run "apt-get upgrade" something gets "upgraded" and the display no longer works. I've tested this on multiple tinkerboards with the same results. The tinkerboard is running, I can ssh into it. Just no display. dmesg output: Spoiler armbian@tinkerboard:~$ dmesg [ 0.000000] Booting Linux on physical CPU 0x500 [ 0.000000] Linux version 4.14.0-rc1-rockchip (root@armbian) (gcc version 5.4.0 20160609 (Ubuntu/Linaro 5.4.0-6ubuntu1~16.04.4)) #2 SMP PREEMPT Wed Sep 20 11:37:48 CEST 2017 [ 0.000000] CPU…

• 0

  Reputation Points

• 16 replies
• 5.2k views
• 1 follower

TonyMac32

September 21, 20179 yr

I am trying to get the ARM performance assessment setup working (I'm trying to get Mali profiling for OpenCL code) on the Rock 5B+, and I've hit a blocker. The main component to this is some kernel configuration (CONFIG_ARM_SPE_PMU) and a loadable module. Oddly, those work fine in a custom kernel build. What I am hitting appears to be some missing interrupt setup that renders all those components inert. (It has to be a custom build to get CONFIG_ARM_SPE_PMU set. The issue is that even with the kernel configured and the module loaded, the SPE component remains inactive. ARM has its own system report tool which analyzes a setup, and that tool is re…

• 0

  Reputation Points

• 0 replies
• 987 views
• 1 follower

Stuart Watt

May 1May 1

Thank you all for this series of notes. I have been operating Armbian 22.08 successfully using the sd card on my PBP and like it BUT I would like to boot from emm. I have tried dozens of ways to install it to no avail. Seems to be associated with the rootdev=UUID=... If I use the UUID provided in the Armbian-install then I can boot from emm but it ends up mounting and running from the SD partition. Is there any code that can be inserted into the /boot/armbianEnv.txt file that would provide better diagnostics? To me it appears as if the emm partitions UUID is not available at boot time. Thanks, Carl

• 1

  Reputation Points

• 6 replies
• 6.9k views
• 2 followers

AB-Stromer

July 11, 20233 yr

Hello, I've installed the 22.11 version with the 5.15 kernel on the microSD card. I've a rockpro64 with the SSD adapter and a WD black 250GB nvme. The system doesn't recognizes this drive. I've tested the latest stable ayufan image (kernel 4.4) and it recognises it perfectly. Should I downgrade the kernel to the 4.4 branch? Any help would be appreciated. Thanks,

• 0

  Reputation Points

• 0 replies
• 2.2k views
• 1 follower

jolosan

December 11, 20223 yr

I decided to try the new Armbian 23.02 Jammy Gnome build and after booting with my SD card, the process gets to a point where it presents a prompt orangepi5 login: and whatever I attempt to enter returns as an incorrect login. I can't find any specific documentation which indicates the default login credentials for this build.

• 0

  Reputation Points

• 2 replies
• 6k views

compent

March 5, 20233 yr

I have compiled with Armbian build (btw i reported that RockPro64 and Rock64 download pages give 502 Bad gateway) 1. Armbian_23.08.0-trunk_Rockpro64_jammy_current_6.1.46_minimal.img 2. Armbian_23.08.0-trunk_Rockpro64_jammy_current_6.1.46_cinnamon_desktop.img With SPI disabled, the img boots fine, but when reboot/restart takes place, board gives black screen, no U-boot activity, no white light. It will boot again after restart if reset pressed or power off/on Shouldnt board reboot normally? PS nd after u-boot log/text this screen shows prior booting

• 0

  Reputation Points

• 1 reply
• 2.7k views

2play

August 23, 20233 yr

flashed to m2 mvme, board attempts to boot , then after armbian logo it falls into busybox command prompt (

• 0

  Reputation Points

• 1 reply
• 2.7k views

Igor

November 30, 20241 yr

I tested Armbian 24.5.1 Noble Gnome + trunk MESA/VPU Kernel: 6.6.31, Size: 1.3GB, Release date: May 25, 2024 on my PBP (sd card). What does not work: - Sound - HDMI Monitor on PB dock Thank you

• 0

  Reputation Points

• 0 replies
• 3.2k views

sepp

May 27, 20242 yr

On Tinkerboard S, I installed Armbian 24.5.1 Noble XFCE to mmc and tried again with an SD card after having trouble. The desktop does not respond to 2 different keyboards I have tried. If I use a mouse to open Terminal, the keyboards do work in the Terminal. If I try to open Web Browser in the applications menu, I get a window saying "Failed to execute Web Browser. Input/output error." apt update and apt upgrade do not fix the problem. Here is a log: https://paste.armbian.com/onikesixam

• 0

  Reputation Points

• 3 replies
• 5.1k views

Igor

July 16, 20242 yr

I downloaded and flashed the three images of Armbian 24.8.1 (Noble GNOME, Ubuntu 22.04 Jammy and Debian 12 Bookworm) on the Banana Pi M7, connected to the computer via serial console. The three images are these: Armbian_24.8.1_Bananapim7_noble_vendor_6.1.75_gnome-kisak_desktop.img Armbian_24.8.1_Bananapim7_jammy_vendor_6.1.75_kde-neon-kisak_desktop.img Armbian_24.8.1_Bananapim7_bookworm_vendor_6.1.75_cinnamon-backported-mesa_desktop.img For each image, I booted and logged the board output. The board fails to successfully boot and instead gets stuck in a boot loop. I then mounted the armbi_root partition and edited the file armb…

• 1

  Reputation Points

• 7 replies
• 15.4k views
• 1 follower

armsom-jackson

November 29, 20241 yr

Yesterday I was happy to see the new and fresh Armbian release for the Rock 5 ITX after about 1 year from the last update. I also tried the Armbian Imager and the SD creation was very easy and smooth. I selected the recommended release based on Ubuntu 24.04 + Gnome desktop. Unfortunately when the desktop was about to start, everything when black, stucked and zero interface. On the other hand, the OS is alive and I can connect remotely via SSH. Did anyone have the same problem? Possible solution? [EDIT]. sudo systemctl restart gdm and desktop pops up. Restarting the system, black again.

• 1

  Reputation Points

• 5 replies
• 3.5k views

DavidFajardo

February 20Feb 20

Last week installed Armbian for the first time on my Pinebook Pro that was basically bricked from Manjaro. Everything worked great! Audio is a little weak, but will look into that later. Today I pulled down the 25.2.1/6.12.16 update. On booting in Grub, I now get a message "Loading Device Tree Blob...", followed by "Error: not a regular file Press any key to continue". The boot then continues after a bit, and system seems to work fine from a user perspective after that (posting this from the machine). But there are some rockchip-pcie, rk3399-dmc-freq and brcmf errors in the armbianmonitor output (attached url) . I'm an Armbian noob, so dunno if the…

• 0

  Reputation Points

• 0 replies
• 2.2k views

namahsrob

February 25, 20251 yr

I've downloaded the Armbian 25.5.1 (Kernel 6.12) Home Assistant image (https://dl.armbian.com/orangepi5-plus/Bookworm_current_minimal-homeassistant), burned to microsd and rebooted the orange pi 5 plus. I burned the image to a microsd cards, inserted the microsd and did a hard reboot of the SBC. The error message is "Gave up waiting for root filesystem device."

• 0

  Reputation Points

• 7 replies
• 3.5k views

Igor

July 30, 20251 yr

I updated to Armbian 26.2.1 on OPi5, and it can't boot from MTD (rootfs at NVMe), and I have to use SD card to boot to NVMe as workaround. After looking into this issue, I found rkspi_loader.img is no longer available for current (6.18.8 kernel) u-boot pkg and armbian-config flashes u-boot-rockchip-spi.bin ( or similar sata version) to /dev/mtdblock0 and I think this is wrong image for MTD bootloader. If I use older vendor image, which u-boot pkg has rkspi_loader.img, system can boot to NVMe rootfs and I notice that /dev/mtdblock0 has several gpt partitions including u-boot one, and flashing u-boot-rockchip-spi.bin erases partitions in SPI flash. I…

• 1

  Reputation Points

• 27 replies
• 10.5k views
• 2 followers

eselarm

April 28Apr 28

Got quite excited seen that the wifi driver is finally available and was going to test the browser and graphic acceleration in the current kernel but I flashed 3 times the Desktop image with Gnome/Current 6.18.33 and it did not boot. Is there possibly an issue with u-boot?

• 1

  Reputation Points

• 9 replies
• 1.2k views
• 1 follower

OttawaHacker

August 3Aug 3

Hi, has any of you some experience connecting a Hifiberry Amp+ to a Tinkerboard - on Hifiberry pages this is now a possible connecting but I miss a howto and would really appreciate a quick start on this. Have previously succeed with Raspberry 3 and IQaudio - but intend to take a step further and do a project being more than just an amplifier. After testing several OS I have to admit Armbian has become my favorite and it is within this OS I hope to achieve this.

• 0

  Reputation Points

• 1 reply
• 3.4k views

Andrius ok

February 23, 20188 yr

Hello. I want to try UEFI boot on this board. And I have one question. Can I use Rockchip vendor kernel with Armbian UEFI?

• 0

  Reputation Points

• 6 replies
• 7.6k views
• 1 follower

VennStone

August 5, 20251 yr

Hello, I own a Tinker Board S (bought one or two years ago) attached to a Sony Bravia KDL 22EX320 TV by HDMI, which has a native resolution of 1388x768 pixels. Bionic desktop with kernel 5.4 (got from https://dl.armbian.com/tinkerboard/Bionic_current_desktop) didn't properly recognize the TV resolution, but set it to 1920x1024. If I run xrandr --props the resolution is not listed. I'm posting because I'm almost sure that the old TinkerOS 2.0.8 (that I installed with the board) recognized the TV resolution correctly - it anyway boots to desktop without requiring interaction, so not being able to read the text at the edges of the console …

• 0

  Reputation Points

• 4 replies
• 4.2k views

trip

April 10, 20206 yr

I am trying to build armbian image via WSL 2, as I have done hundreds of times in the past. I ensured that the wsl2 distro (Ubuntu) was up to date via apt update and apt upgrade, and ran git pull was issued within /build folder prior to issuing ./compile.sh. Several files failed to download during the build including: [💲|🔨] E: Failed to fetch http://security.debian.org/dists/trixie-security/main/binary-arm64/Packages 404 Not Found [IP: 151.101.130.132 80] [💲|🔨] E: Failed to fetch http://deb.debian.org/debian/dists/trixie/main/i18n/Translation-en 404 Not Found [IP: 151.101.130.132 80] [💲|🔨] E: Failed to fetch http://deb.debian.org/debian/dist…

• 0

  Reputation Points

• 1 reply
• 668 views

Werner

August 1Aug 1

I would love to use Armbian Build to construct a Debian 12 Bookworm images with KDE Plasma as the windows manager. I note that KDE Plasma isn't an option in the armbian builder. I have no problem building with XFCE or Cinnamon.

• 0

  Reputation Points

• 3 replies
• 4.2k views
• 1 follower

Robert Pace

April 27, 20251 yr

I'm adding this here as I want to contribute to the community, but I'm still not sure how. I've been playing with Armbian Build lately and found it's great for quick build images for testing purposes before it's officially made available. So I started build my own images with i3, mate, kde, and I noticed that, in my personal taste, the one that was better suited for my needs was Sway, but there's no desktop image with it. So I built a Server version and start installing it. I know it may not be of interest of everybody, so I was planning to do it for myself, so I can continue building with the interface, but having Sway "automatically" installed. …

• 0

  Reputation Points

• 6 replies
• 4.9k views

ricardo_brz

October 19, 2025Oct 19

``` May 21 21:53:26 rpc.idmapd[21345]: main: fcntl(/run/rpc_pipefs/nfs): Invalid argument May 21 21:53:26 systemd[1]: nfs-idmapd.service: Control process exited, code=exited, status=1/FAILURE ``` The rpc.idmapd version in Debian is still ancient (as with many things in debian) and still requires dnotify but the armbian kernel for the orange pi 5 build ``` $ grep -i dnotify /boot/config-5.10.110-rockchip-rk3588 # CONFIG_DNOTIFY is not set ``` It looks like bookworm will likely fix this when it's out, so maybe the right thing to do is simply move to bookworm asap but this does prevent the ability to fully support nfsv4 with…

• 0

  Reputation Points

• 0 replies
• 1.5k views

dopey1620

May 22, 20233 yr

Dear All, I am running a project with Tinkerboard and a gigE camera. Trying to take video image through gstreamer (gst-launch). The camera is an Imaging source camera (DFK 33GX249) and I am using the linux library (https://github.com/TheImagingSource/tiscamera) for developing apps. My Tinkerboard is running Armbian Stretch (Armbian_5.50_Tinkerboard_Debian_stretch_next_4.14.52_desktop) Everything is working perfectly untill I am trying to run the command below: tinker@tinkerboard:~$ TCAM_LOG=DEBUG gst-launch-1.0 --gst-debug=tcamsrc:5,tcambin:5 --gst-debug-no-color tcambin ! videoconvert ! autovideosink The output is: Spoiler …

• 0

  Reputation Points

• 2 replies
• 2.7k views
• 1 follower

Igor

May 8, 20197 yr

Hello! I'm trying to get Armbian jammy latest to boot on my new RockPro64. I've tried both the CLI and XFCE images, flashed with Balena to a good SanDisk uSD card. Both boot into U-Boot but then fail to find a partition on mmc 1. Checking the SD card there's only 1 Linux partition and no FAT one. I tested with a Debian image on the same SD card (DOS + Linux Partition) and it booted into the installer no problem. Any ideas? Thanks! (Also asked on Pine 64 Forums, I will update/close this if they resolve it or vice/versa.)

• 0

  Reputation Points

• 4 replies
• 6.7k views

MisterC707

January 13, 20233 yr

Hi! I have got Orange Pi 4 lts with 4 gb ram version. I made flashed sd card using Armbian-Imager using jammy_current_6.6.31 minimal. My problem is OS detects only 3gb (2.91) of 4gb. And i investigated and googled, spent more enough time to fix it but still fail. It is not likely reservation. also tried with bookworm the result is same 3gb. with noble minimal the board doesn't boot at all. what can i do to make os detect all 4 gbs. Maybe there was some similar issue before and i missed? Many thanks, appreciate any help!

• 0

  Reputation Points

• 3 replies
• 2.1k views

Kamar

March 2Mar 2

I've got Orange Pi 5 Plus board with 16 Gb of RAM, 256 Gb of eMMC, Realtek RTL8852BE-CG wireless module. SD card is Samsung EVO Plus 32Gb. I tried to run Armbian images on this board (from the SD-card I've mentioned before) but it was absolutely failed. I tried 5 images: Armbian_23.11.1_Orangepi5-plus_jammy_legacy_5.10.160_gnome-amazingfated_desktop.img.xz Armbian_23.11.1_Orangepi5-plus_bookworm_legacy_5.10.160.img.xz Armbian_23.11.1_Orangepi5_jammy_legacy_5.10.160_gnome-amazingfated_desktop.img.xz Armbian_23.11.1_Orangepi5-plus_bookworm_edge_6.7.0-rc1.img.xz Armbian_23.11.1_Orangepi5-plus_jammy_edge_6.7.0-rc1.img.xz which…

• 1

  Reputation Points

• 27 replies
• 20.2k views
• 2 followers

ozacas

February 6, 20242 yr

I installed Debian 12 (Bookworm)XFCE from the official Armbian website onto the NVME SSD of the board. Everything works fine except the 4 hard drives that are connected to boards SATA connectors. They do appear and work when i boot into the Debian provided by Radxa, so I know hardware isn't an issue. I think that they also worked during the very first boot of the system but after ``` apt update && apt upgrade ``` and reboot, they stop working. Any advice would be much appreciated. ``` rock-5-itx:~$ lsblk NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINTS mtdblock0 31:0 0 16M 0 disk mmcblk0 179:0 0…

• 1

  Reputation Points

• 97 replies
• 39.4k views
• 8 followers

Popolon

December 12, 2025Dec 12

U need ixgbe to run my Intel X550T 10G Ethernet NIC. That module seems to be a part of linux-modules-$(uname -r) package. My kernel version is 5.10.60-rockchip64. However, I do not have linux-modules-5.10.60-rockchip64 available via apt. # apt install linux-modules-$(uname -r) Reading package lists... Done Building dependency tree Reading state information... Done E: Unable to locate package linux-modules-5.10.60-rockchip64 E: Couldn't find any package by glob 'linux-modules-5.10.60-rockchip64' I have apt downloaded linux-modules of some greater kernel release to make sure it provides ixgbe.ko. It does: # apt install --download-…

• 1

  Reputation Points

• 8 replies
• 5.1k views

Aleksandr

November 22, 20214 yr

with clean install of armbian plus those 4 lines to install hardware acceleration glmark2-es2 gives score of about 800-900, about less then 25% of performance opi5 is capable. is it possible to raise that a bit, not all the way but just a bit more without instaling gnome or wayland, just to keep armbian as clean as its possible. as it is, its stable but barely(they do run) able to run 4k youtube oe 4k mkv, as soon as there is gnome and wayland it starts to crash, joshua rieks version, monka, armbian with all the drivers, any i tried it would crash eventualy.

• 1

  Reputation Points

• 4 replies
• 10.7k views

NicoD

June 1, 20233 yr

Hi Team, I want to build or get pre-built armbian image for kernel 4.4 with wifi : rtl8723as enabled. Please help or provide any suggestion to build armbian image for rockpi-e. Any help or suggestion will be appriciated.

• 0

  Reputation Points

• 3 replies
• 3.1k views
• 1 follower

Bhavin

March 6, 20242 yr

what is new? download (temporally) final versions https://www.armbian.com/khadas-edge-2/

• 0

  Reputation Points

• 2 replies
• 2.7k views
• 1 follower

Igor

June 18, 20242 yr

I followed the provided instructions to install Arbmbian on Orange Pi 5 Plus 16GB, so I downloaded the official Ubuntu image from the Orange Pi website, and when it booted, it sudo apt update sudo apt install mtd-utils sudo flash_eraseall /dev/mtd0 The flash operation was finished successfully. Then I turned off, loaded Armbian Ubuntu 24.04 (Noble) (Desktop images with Armbian Linux v6.12) on SD and started the machine. I have a monitor connected to the machine, but there is no output. My router doesn't show any new network device, so I suppose that Armbian doesn't load. It's exactly the same situation when I tried to install Armbian without /dev/mtd0 erasin…

• 0

  Reputation Points

• 0 replies
• 3.4k views

Igor V

December 10, 20241 yr

I did a fresh install of armbian jammy 23.5 cli on my orangepi 5 (I previously used 22.11 and 23.02), and I cannot reboot. "sudo reboot" just hangs the system. Not really a big deal, just somewhat annoying, because previous versions runs fine. Anybody else experiencing the same problem? "armbianmonitor -U" output is attached. armbianu.txt

• 0

  Reputation Points

• 4 replies
• 3.3k views
• 1 follower

conky

June 16, 20233 yr

I somewhat recently used Armbian Build to compile a desktop Bookworm image, which is quite stable and functional except for EMMC support. Packages: Debian stable (bookworm) Support: DIY (custom image) Linux Atlas 6.1.84-vendor-rk35xx #1 SMP Tue Dec 24 13:36:04 UTC 2024 aarch64 GNU/Linux My question is where can one find the current status of the various kernel versions support for features like I2C, SPI, EMMC, MESA, etc.? I recognize that newer kernels like 6.12.yyy are very much a WIP. I also would love more information on the the RK3588 kit used with kernels to backport features.

• 0

  Reputation Points

• 1 reply
• 3.5k views
• 2 followers

Werner

January 8, 20251 yr

I have built quite a few Debian12 Desktop images from github.com/armbian/build for a Debian Bookworm/XFCE/Vendor Kernel environment and noticed that recent vendor kernels do not have I2C-2.M0 as a kernel module listed within armbian-config. It appears that only two kernel modules are to be found, one being Panthos, the other involving a change in frequence of some item. This image does include I2C-2.mo: Armbian-unofficial_25.02.0-trunk_Orangepi5-plus_bookworm_vendor_6.1.84_xfce_desktop.img which includes kernel: Linux Atlas 6.1.99-vendor-rk35xx #1 SMP Fri Feb 21 18:11:03 UTC 2025 aarch64 GNU/Linux But these images do not contain the I2C-2…

• 0

  Reputation Points

• 5 replies
• 4k views

Robert Pace

March 1, 20251 yr

Armbian Linux v6.1 - Ubuntu 24.04 (Noble) with XFCE seems not to support full bluetooth controller at boot stage, we need to manually load hci_uart module and and attach it to the serial interface. Is there any other service that is required to be enabled or any overlay that should be checked? After boot, we need to execute some commands to get the BT controller alive: user@bananapim7:~$ hcitool dev Devices: user@bananapim7:~$ sudo modprobe bluetooth user@bananapim7:~$ sudo modprobe hci_uart user@bananapim7:~$ sudo btattach -B /dev/ttyS6 -P bcm -S 115200 & [1] 3405 Attaching Primary controller to /dev/ttyS6 Switched line discipline fro…

• 0

  Reputation Points

• 5 replies
• 3.3k views
• 2 followers

SM2027

February 5Feb 5

This image works OK, and we now have both a 6.7 kernel AND graphics. Minor issues: EzCast stupid windows Wifi adapter does not plug and play. The vertical USB port does not sense plugging in a device (Wifi) Good work, Gullik

• 1

  Reputation Points

• 15 replies
• 6.8k views

Gullik

January 9, 20242 yr

Hello Armbian community, I am writing this topic because, despite the drivers for the processor's integrated GPU are installed within the operating system, they do not seem to work properly. Precisely the system seems to work but as soon as I try to play a video it is played by the CPU and not by the GPU with lag and the CPU is at 100%. I leave the link and the attachment of the result of the armbianmonitor -U command that I posted here: https://paste.debian.net/1337993/ it is a compressed tar.gz file since I included all the results of the command Analysis.txt

• 0

  Reputation Points

• 5 replies
• 7.2k views
• 1 follower

Giuseppe93

September 24, 20251 yr

Hi , I have an ASUS Tinker board S and I installed Armbian 5.54 on SD card. Then, I want work on eMMC drive of ASUS Tinker board S but, Armbian no detect it. How can I work with eMMC drive in Armbian ? Here my board info: http://ix.io/1j2Z Thanks, see you.

• 1

  Reputation Points

• 20 replies
• 14.5k views
• 1 follower

xxavi

August 4, 20188 yr

I upgraded my ROCK5B in-place from Armbian Bookworm beta to Armbian Testing/Trixie beta and it turns out that no Ambian packages are seen (so not updated). The Debian Trixie packages do upgrade, as for example I just saw while doing full-upgrade: libavif16:arm64 (1.2.1-1.2) over (1.2.1-1.1) ... I thought something with my install, but also downloaded 'Armbian_25.8.0-trunk.50_Rock-5b_trixie_vendor_6.1.115_minimal.img' yesterday and it has the same issue (quick test via systemd-nspawn container on loopdev mounted image). My goal is at least to figure out what is best bootloader and kernel for the ROCK5B. So far I simply copied/cloned Armbian Bookw…

• 0

  Reputation Points

• 1 reply
• 5.9k views
• 1 follower

eselarm

June 3, 20251 yr

Hi! I'm using Armbian with Ayufan's 5.3.0rc4 kernel (until ~1 month ago when I decided to freeze the dev kernels, they were not able to expose the pwmon for the fan that I need to keep running to cool my nas case). But I've seen lots of updates flying around about uboot. So I am wondering: are there significant improvements to uboot? I am currently using an old version of uboot on the SPI flash (so it is a little painful to test new version) and I am wondering if I should disable my SPI in order to have uboot on my emmc (to boot off the emmc) or if there is even a newer option to reflash my spi with a newer uboot... Thanks, Mathias PS: so…

• 0

  Reputation Points

• 0 replies
• 2.7k views

Mathias

November 25, 20196 yr

Hi everyone and thank you in advance for your support! Long story short my system is in Read only mode after a reboot and I don't know what caused it. Some useful info before the reboot: I've been trying to install a RAID1 configuration so at certain point I did sudo update-initramfs -u I have manually updated and upgraded (only busybox was upgraded) with sudo apt update && sudo apt upgrade If you need any other info let me know! EDIT: I found out that I'm able to manually mount the root partition, but the problem persist after each reboot. I then added the follong to /boot/armbianEnv.txt extraargs=fsck.…

• 0

  Reputation Points

• 1 reply
• 3.4k views

Račka

August 17, 20242 yr

Hi. I am using Khadas Edge 2 Rockchip RK3588S with Armbian Minimal version. I have installed xorg and firefox browser. After "startx" I rotated display (xrandr -o left) and run firefox. I don't know how is it calls, but I get a big gap when scrolling the website. In xrandr -o normal, it's gone. I will attach the video. Help me please. Thanks. IMG_0085.mp4

• 0

  Reputation Points

• 3 replies
• 3k views
• 1 follower

Ilya

October 12, 20232 yr

Hello to all, I am using an HDMI switch. I have noticed that TinkerBoard Armbian, displays fine the UBOOT text/logo but after that, the HDMI shows no signal/image If I connect the HDMI cable directly from the board to the monitor all is ok. What would be the reason or setting to be changed so TinkerBoard HDMI port can output display either case (hdmi direct to over a hdmi switch) tx in advance

• 0

  Reputation Points

• 2 replies
• 3.2k views
• 1 follower

2play

August 25, 20233 yr

Hi I have a problem with change desktop language from en to polish. I tryed all solutions armbian-config , dpkg-reconfigure locales, export LANG. After reboot I got english desktop and locale info http://ecocut.pl/wp-content/uploads/2019/03/locale-1.jpg

• 0

  Reputation Points

• 4 replies
• 4.3k views

Kisuke-CZE

September 8, 20197 yr

Can't seem to get bluetooth working with trixie and pipewire. I can pair & trust, just can't connect. Failed to connect: org.bluez.Error.Failed br-connection-profile-unavailable Anyone else had this issue? Was working fine on a cubie running bullseye, so next maybe I'll try and older os and see...

• 0

  Reputation Points

• 3 replies
• 2.4k views
• 1 follower

Meestor_X

February 17Feb 17

I am Running Armbian 24.5.1 Jammy with Linux 6.1.115-vendor-rk35xx on Radxa Rock5b (and it works great!!) when running sudo apt dist-upgrade or sudo apt upgrade I get Die folgenden Pakete sind zurückgehalten worden: armbian-bsp-cli-rock-5b " Packages retained" apt list --installed | grep armbian-bsp-cli-rock-5b gives: armbian-bsp-cli-rock-5b-legacy/jammy,now 24.5.1 arm64 [installiert] armbian-bsp-cli-rock-5b/jammy,now 24.5.1 arm64 [Installiert,aktualisierbar auf: 25.5.1] ## installed, can be updated can/shall I force the the use of "armbian-bsp-cli-rock-5b/jammy,now 24.5.1 arm64 [Installiert,aktualisierbar auf: 25.5.…

• 0

  Reputation Points

• 8 replies
• 4.6k views
• 2 followers

robertM

August 4, 20251 yr

I have a 1 GB Renegade board and downloaded Armbian_19.11.3_Renegade_buster_current_5.3.11 image to install. Noticed it was only 510MB of RAM. Relevant extracts from serial log: U-Boot 2017.09-armbian (Nov 19 2019 - 00:09:05 +0100) Model: Firefly ROC-RK3328-CC DRAM: 510 MiB ____ _ | _ \ ___ _ __ ___ __ _ __ _ __| | ___ | |_) / _ \ '_ \ / _ \/ _` |/ _` |/ _` |/ _ \ | _ < __/ | | | __/ (_| | (_| | (_| | __/ |_| \_\___|_| |_|\___|\__, |\__,_|\__,_|\___| |___/ Welcome to Armbian Buster with Linux 5.3.11-rockchip64 System load: 0.10 0.14 0.06 Up time:…

• 1

  Reputation Points

• 11 replies
• 7.2k views
• 2 followers

Igor

June 3, 20206 yr

Hi! I just booted Armbian_20.08_Rockpro64_focal_current_5.7.15.img via sdcard , but HDMI output seems to stop after "Starting Kernel". Just after that I see some yellow/black vertical lines on my monitor and then the screen goes black, no more HDMI input on the monitor. Logging into Armbian on the RockPRO then works fine via ssh, can do the setup, update etc. So it looks like a problem with HDMI output? Anyone ideas how to solve this? Would like to have console terminal access via HDMI as last resort Thanks in advance! p.s. Just tried the Armbian_20.08_Rockpro64_focal_current_5.7.15_desktop which seems to have t…

• 1

  Reputation Points

• 7 replies
• 7.7k views

rik-shaw

November 17, 20205 yr

$ neofetch ubuntu@orangepi5 ---------------- █ █ █ █ █ █ █ █ █ █ █ OS: Armbian (23.11.0-trunk.145) aarch64 ███████████████████████ Host: Orange Pi 5 ▄▄██ ██▄▄ Kernel: 6.6.0-rc1-edge-rockchip-rk3588 ▄▄██ ███████████ ██▄▄ Uptime: 4 mins ▄▄██ ██ ██ ██▄▄ Packages: 427 (dpkg) ▄▄██ ██ ██ ██▄▄ Shell: bash 5.2.15 ▄▄██ ██ ██ ██▄▄ Terminal: /dev/pts/0 ▄▄██ █████████████ ██▄▄ CPU: (8) @ 1.800GHz ▄▄██ ██ ██ ██▄▄ Memory: 196MiB / 15718MiB ▄▄██ ██ ██ ██▄▄ ▄▄██ …

• 0

  Reputation Points

• 2 replies
• 2.6k views

Werner

October 2, 20233 yr

Dear team, On Armbian_25.11.1_Orangepi5-plus_trixie_current_6.12.58_minimal.img not possible to boot kernel, only u-boot seems available ? Bellow is the debug log on tty DDR V1.13 25cee80c4f cym 23/08/11-09:31:58 LPDDR4X, 2112MHz channel[0] BW=16 Col=10 Bk=8 CS0 Row=18 CS1 Row=18 CS=2 Die BW=8 Size=8192MB channel[1] BW=16 Col=10 Bk=8 CS0 Row=18 CS1 Row=18 CS=2 Die BW=8 Size=8192MB channel[2] BW=16 Col=10 Bk=8 CS0 Row=18 CS1 Row=18 CS=2 Die BW=8 Size=8192MB channel[3] BW=16 Col=10 Bk=8 CS0 Row=18 CS1 Row=18 CS=2 Die BW=8 Size=8192MB Manufacturer ID:0xff CH0 RX Vref:28.5%, TX Vref:22.8%,21.8% CH1 RX Vref:27.1%, TX Vref:21.8%,21.8% CH2 R…

• 0

  Reputation Points

• 11 replies
• 3.4k views

Boardcon_yang

August 20Aug 20

On an orangepi 5 this image failed to post. Armbian_25.8.2_Orangepi5_noble_vendor_6.1.115.img.xz worked just fine via balena etcher and booting from a nvme.

• 1

  Reputation Points

• 8 replies
• 3.3k views
• 2 followers

OttawaHacker

November 10, 2025Nov 10

So I have downloaded several versions of Armbian for Tinkerboard using BullsEye and Yammy. Not one creates a working Access Point. The Bullseye version ends with a message that the hotspot has been activated but nothing appears. The yammy version fails with a message there is no usable driver for hostapd. It appears there are a lot of issues with this function. Why not leave it out or document which boards the feature doesn't support. It would save a lot of time going down rabbit holes.

• 0

  Reputation Points

• 2 replies
• 3.8k views

lampra

November 28, 20223 yr

I downloaded the kernel source and kernel headers on a rk3288 rockchip (tinkerboardS) and noticed there was a mismatch between kernel version, armbian release and chipset (rockchip64) - see below. root@tinkerboard:~# uname -a Linux tinkerboard 4.4.174-rockchip #7 SMP Sun Feb 10 11:57:26 CET 2019 armv7l armv7l armv7l GNU/Linux root@tinkerboard:~# cat /etc/armbian-release # PLEASE DO NOT EDIT THIS FILE BOARD=tinkerboard BOARD_NAME="Tinkerboard" BOARDFAMILY=rockchip VERSION=5.75 LINUXFAMILY=rockchip BRANCH=default ARCH=arm IMAGE_TYPE=stable BOARD_TYPE=conf INITRD_ARCH=arm KERNEL_IMAGE_TYPE=zImage root@tinkerboard:/usr/src# …

• 0

  Reputation Points

• 0 replies
• 2.4k views

Roland G

May 19, 20197 yr

I am waiting on my opi5 but was already investigating how to run Roblox (an x86 32 bit Windows game) on it. Grapejuice + box86 + wine could do the trick and saw this interesting script: https://github.com/NicoD-SBC/armbian-gaming Will this be working for opi5 too or is it specific to rk3399 (saw that in some compiler flags)? Anybody experience or an updated installer script? Related info: This YouTube channel covers examples of running games on rk3588 (rock5b) making me believe performance could be quite good: https://youtube.com/@TheByteman

• 0

  Reputation Points

• 4 replies
• 11.5k views

NicoD

February 22, 20233 yr

Hey everyone. New to Armbian and Orange Pi, but no stranger to everything I ever try do do being a major hassle! So here's the deal. Installed Armbian jammy 5.1 for orange pi plus. Working nicely. Except some of you might remember me from earlier today when I was struggling to get my ax210ngw working correctly (thanks by the way. Fixed that)! So I follow the process to switch from SD card to my Samsung 980 pro 1tb nvme. Bit of confusion getting it to show as an option in armbian-install, but I got it. Formatted in ext4 with a partition via gparted--now every time I try to run the install script, no matter which option I choose, it either freezes or…

• 0

  Reputation Points

• 2 replies
• 2.6k views

Antimtr

April 17, 20242 yr

running 24.8.3, and Armbian-install's screen looks like this: Current root: UUID=117b851b-2be0-4bb7-8572-7edce1ef7375 SD card (/dev/mmcblk1) 1 Boot from SD - system on SATA, USB or NVMe 2 Boot from - system on 3 Boot from - system on SATA, USB or NVMe 5 Install/Update the bootloader on SD card (/dev/mmcblk1) I have a µSD card inserted and a 4gb eMMC, but it looks like the names of these devices are missing?

• 1

  Reputation Points

• 11 replies
• 4.6k views
• 1 follower

Meestor_X

January 1, 20251 yr

Hello, finally I have time to play with my OPI5, first thing I tried is to install on USB-C, but the port doesn't seem to work. Then I tried to install using USB3 port, on a ssd drive. The armbian-install utility seems to do the job and after installing the bootloader on mtdblock0 I powered off. At reboot everything is like before: if I remove the sd card the systen won't boot. If I boot with the sd card inserted the root partition is on /dev/mmcblk0p2 First thing that came into my mind is to mount SPI and check if bootloader is ok, but I'm unable to mount it: ~# mount /dev/mtdblock0 /mnt/spi mount: /mnt/spi: wrong fs type, bad optio…

• 0

  Reputation Points

• 0 replies
• 2k views

pazzoide

February 3, 20233 yr

For a fresh install of the latest desktop version for OrangePi5 I cannot get the system to run from NVME which is a Samsung 960 Pro. It gets stuck on the spinner at boot for the first-time boot after NVME using SD - NVME in armbian-installer. Any suggestions...

• 0

  Reputation Points

• 4 replies
• 2.3k views

royk

May 12, 20233 yr

Hey there, first of all: THANKS for the armbian project! My issue is with an M1, fresh jammy xfce install on an sd-card. NVME is installed (can be accessed after mounting it manually, no issues there) Wishing to move system to this /dev/nvme0n1, keeping boot on the sdcard, as I understand this being the only viable option, currently. When using armbian-install, selectin option 1 "Boot from SD - system on SATA, USB or NVMe" and confiming, next is an error message: --- There is not enough free capacity on /dev/nvme0n1. Please check your device. --- Did so, tried creating an empty (…

• 0

  Reputation Points

• 2 replies
• 3.6k views
• 1 follower

_Rygelius_

March 19, 20233 yr

Hello, after a short break, wants to continue with the Tinkerboard. :) I use Armbian-Stretch with the kernel-4.4.126. I want to connect an IR receiver to a GPIO port and use it with the lircd tool. What possibilities does Armbian-Stretch offer me here? Thank you very much. Clash

• 1

  Reputation Points

• 7 replies
• 9.6k views
• 2 followers

jock

June 13, 20188 yr

I get the following result when trying to run armbianmonitor -u. Is it broken or am I doing something wrong? Armbian 24.8.3 Bookworm CLI on a Rock-Pi S # armbianmonitor -u Collecting info and sending to paste.armbian.com, wait... /usr/bin/armbianmonitor: line 976: iostat: command not found <!DOCTYPE html> <html lang="en"> <head> <meta charset="utf-8"> <title>Error</title> </head> <body> <pre>Cannot POST /log</pre> </body> </html> Please post the URL in the forum where you've been asked for.

• 0

  Reputation Points

• 2 replies
• 2k views

Meestor_X

December 14, 20241 yr

Hi, could someone just add TCP BBR module into kernel? pls

• 0

  Reputation Points

• 6 replies
• 5k views

waipan

January 29, 20188 yr

I've installed the Armbian distro for Tinker Board, updated it, fiddles with PulseAudio settings, added Codecs but for the life of me I can't get any audio from the headphone jack. Hopefully someone can suggest a solution. TIA.

• 0

  Reputation Points

• 2 replies
• 6.9k views

Xalius

July 26, 20179 yr

Update May-15-2018: pushed today, Bluetooth patches to support bt in default and next kernels from boot, no user intervention ( "It just works" ). Thank you again to @Myy and @Jyu Ho for their work. Spoiler Trying to get the Bluetooth working, I've had a few different issues, I've labelled them per kernel: Default: Running "hci_attach" locks up the board after config and loading firmware. UPDATE June-25-2017: Disabling DMA on uart0 resolved the issue as theorized below. UPDATE Feb-22-2018: Services added loading Bluetooth automatically on boot, takes reboot after fi…

• 1

  Reputation Points

• 54 replies
• 25.3k views
• 3 followers

TonyMac32

June 11, 20188 yr

This will be a catch-all for HDMI-related things. Sep. 29, 2017 UPDATE First up is hotplugging in Mainline. Script/rule added to build system. Thank you @botfap for the script I am getting the system events triggered saying the HDMI is unplugged/replugged, (using udevadm -monitor) however nothing is happening in response to the events it would seem, the screen is still blank. I could hook a script to the event, but I'm not exactly sure what I would tell it to do... Any thoughts would be great, I'll be researching.

• 1

  Reputation Points

• 19 replies
• 16.9k views
• 2 followers

Tido

March 1, 20188 yr

Hi, I am looking for owners of RK3288 who can help to find missing information in the system. A lot already works from the template. Vcore has been added thanks to @TonyMac32 , but some important information like RAM frequency (dynamic.5.name=dram_frequency) is still missing. This is my adjusted version, but to do some more HW testing we need as much information about the board as possible. Spoiler web.page.icon='img/logo.png' web.page.menutitle='RPi-Monitor _{('+data.hostname+')}' web.page.pagetitle='RPi-Monitor ('+data.hostname+')' web.status.1.name=Raspberry Pi web.statistics.1.name=Raspberry Pi web.addons.…

• 0

  Reputation Points

• 3 replies
• 5.3k views
• 1 follower

Tido

September 18, 20179 yr

*Updated 7-23* ~~All kernels should be fixed at this point, Legacy, Next, and Dev.~~ The ASUS Tinker Board has a big problem with rebooting properly, centered around the SD card power supplies. Upon issuing a shutdown request, the kernel is turning everything off , including the vmmc regulator. To make matters worse, vqmmc is set to 1.8 Volts if you use a UHS SD card, and the kernel is not switching it back to 3.3 volts before rebooting, which is required if the Rockchip boot ROM is to communicate with the device. The result is a hung board in MaskROM mode. For the Default kernel (4.4), a patch was carried over from the vendor softwa…

• 1

  Reputation Points

• 49 replies
• 30.3k views
• 1 follower

TonyMac32

October 3, 20179 yr

I downloaded the tinker nightly image and burned it to an sd card, putting it into the tinker it does nothing, the red light comes on but does nothing, the sd card is decent, and works fine if i write an image to it for a pi, power supply is fine as well, anyone got any suggestions as to my next steps getting this booted. Thanks

• 1

  Reputation Points

• 16 replies
• 30.3k views
• 1 follower

TonyMac32

July 30, 20188 yr

I have the same issue on my Tinkerboard, here's the armbianmonitor -U output: https://paste.ubuntu.com/p/jggvYDMbCX/

• 0

  Reputation Points

• 10 replies
• 7.3k views

TonyMac32

November 15, 20187 yr

Hello, yesterday i got a powerloss , and my Asus tinkerboard got shutdown. i think i had some updates installed but not yet rebooted the Tinkerboard never restarted again. i first suspected a crashed Emmc disk but i did the following tests and got to the conclusion that Armbian for Tinkerboard is currently broken - restored a past complete image to either SD or Emmc : boots ok. - shutdown then unplug/replug power : OK - update with apt-get update + apt-get upgrade => reboot OK, but shutdown, and then never restart, bricked. shutdown down either with desktop or command line tested also with a second Tinkerbo…

• 1

  Reputation Points

• 14 replies
• 11k views

Igor

May 30, 20215 yr

How can I recover from this? I haven't rebooted: _ _ _ /_\ _ _ _ __ | |__(_)__ _ _ _ / _ \| '_| ' \| '_ \ / _` | ' \ /_/ \_\_| |_|_|_|_.__/_\__,_|_||_| v24.8.4 for Orange Pi 5 running Armbian Linux 6.10.6-current-rockchip-rk3588 Packages: Debian stable (bookworm) IP addresses: (LAN) 192.168.1.2 10.8.0.1 (WAN) xxx.xxx.xxx.xxx Performance: Load: 1% Up time: 21 days 23:00 Memory usage: 10% of 15.35G CPU temp: 41°C Usage of /: 21% of 233G Tips: Support our work and become a sponsor https://github.com/sponsors/armbian Commands: System config : sudo armbian-config System…

• 0

  Reputation Points

• 6 replies
• 9.9k views
• 2 followers

ScottP

November 16, 20241 yr

armbianmonitor output: http://ix.io/4s3z I'm testing Armbian 23.02 Jammy on a Rock Pi S with its matching "PoE HAT" (which provides a 3.5mm headphone jack). No sound cards are available despite the device tree evidently containing sound devices/codecs [1, 2]. aplay output: rockpi-s:~:% aplay -l aplay: device_list:274: no soundcards found... The armbianmonitor/dmesg output contains the following suspicious lines: [ 24.551148] platform acodec-sound: deferred probe pending [ 24.551191] platform sound: deferred probe pending Digging into this a bit further, I found this root@rockpi-s:/home/dale# cat /sys/kernel/deb…

• 1

  Reputation Points

• 11 replies
• 6.6k views
• 3 followers

Igor

May 25, 20233 yr

Hi team, I am on the latest vendor release of gnome installed via armbian installer. Kernel is linux-image-6.1.115-*-rk2410. When I look for audio drivers I do not see card 3: rockchiphdmiin [rockchip,hdmiin], device 0: fddf8000.i2s-dummy_codec hdmiin-dc-0 [fddf8000.i2s-dummy_codec hdmiin-dc-0] Subdevices: 1/1 Subdevice #0: subdevice #0 I got the board very recently and the forum is a little mesay about the hdmi rx functionality. It would be a great help if anyone can help me out on this, let me know if i am missing anything.

• 0

  Reputation Points

• 0 replies
• 757 views
• 1 follower

hyperwolf

May 16May 16

I've been using a few Rock Pi S devices as snapcast clients and after updating them to Armbian 24.8.2 audio does not work anymore. This seems similar to this old post (fix PR). Also, this PR may be a relevant to the issue. https://paste.armbian.com/aziwayelen $ snapclient --host [REDACTED] 2024-09-17 09-28-10.435 [Error] (Snapclient) PCM device "default" not found 2024-09-17 09-28-10.436 [Info] (Snapclient) Version 0.26.0 2024-09-17 09-28-10.437 [Info] (Connection) Resolving host IP for: [REDACTED] 2024-09-17 09-28-10.440 [Info] (Connection) Connecting 2024-09-17 09-28-10.442 [Notice] (Connection) Connected to 192.168.0.100 20…

• 1

  Reputation Points

• 26 replies
• 11.8k views
• 3 followers

robertoj

May 20, 20251 yr

Sir, I have Purchase the Tinker board before 20 days, I install the Armbian 5.35 version in the Board, All software are very Nicely Work , but could not connect audio , I am trying to the 10 more times reinstall the Armbian 5.35 version but could not connect the audio output in audio 3.5mm Jack , I will so tired please solve this Problem in my tinker Board …

• 1

  Reputation Points

• 1 reply
• 3.9k views
• 1 follower

TonyMac32

January 25, 20188 yr

hi running Armbian 25.2.3 stable 6.1.99-vendor-rk35xx (Ubuntu noble) having to change audio every time on reboot (not sticking after selecting),and maybe not showing as they should ,currently using HDMI 0 but shows as below:

• 0

  Reputation Points

• 3 replies
• 1.9k views

Guest

May 27, 20251 yr

I have Orange Pi 5 Plus that I plan to install in a remote location. To boot Orange Pi, I need to press the physical Power On button. How I can setup the machine to boot automatically once the power is supplied? There is nobody on the remote side to press this button. Or maybe there are other options to boot remotely like WakeOnLAN? Where it can be configured? In orangepi-config?

• 1

  Reputation Points

• 5 replies
• 4.7k views
• 1 follower

Werner

December 9, 20241 yr

Hi, The RK3588 supports frequencies as low as 408MHz, but in armbian the minimum is 1008MHz, which makes the cpu run hotter and draw more power even when idle, compared with the OPI ubuntu version. These are the available frequencies: $ cat /sys/devices/system/cpu/cpufreq/policy0/scaling_available_frequencies 1008000 1200000 1416000 1608000 1800000 $ cat /sys/devices/system/cpu/cpufreq/policy6/scaling_available_frequencies 1200000 1416000 1608000 1800000 2016000 2208000 2400000 I want to add the missing frequencies, I tried to look in the armbian repo for dts files that contain these frequencies, but I couldn't find anything. Is is possibl…

• 1

  Reputation Points

• 10 replies
• 8.1k views
• 1 follower

Werner

May 30, 20251 yr

5.1.0-1111-ayufan tag. Kernel crash when PCIE card is installed (thus pcie host root complex initialize). Will try previous tags soon, BTW, if anyone successfully run the "mainline" kernel with PCIE cards? [ 161.895780] io scheduler mq-deadline registered [ 161.897340] io scheduler kyber registered [ 161.911264] io scheduler bfq registered [ 162.136905] vcc5v0_host: supplied by vcc5v0_usb [ 162.740884] rockchip-pcie f8000000.pcie: no vpcie12v regulator found [ 162.746764] rockchip-pcie f8000…

• 0

  Reputation Points

• 0 replies
• 3.9k views

anonymoustemp

June 25, 20197 yr

Hi, I can not get the back panel audio working, the HDMI analog audio to my display works, but changing the output to Analog out is not working. Any suggestions as to where I can start to troubleshoot? Thanks!

• 0

  Reputation Points

• 11 replies
• 4.6k views
• 1 follower

prahal

May 16, 20251 yr

Banana Pi BPI-M7 with Rockchip RK3588, 8/16/32G,RAM 64/128G eMMC,wifi6 support . 2x2.5G port ,1xHDMIout ,2x USB3.0,2xTYPE-C,2x MIPI CSI interface and 1x MIPI DSI interface, 1x M.2 KEY M interface,40 PIN GPIO ,Mini size just 92x62mm. Hardware interface: online documents: https://docs.banana-pi.org/en/BPI-M7/BananaPi_BPI-M7

• 0

  Reputation Points

• 1 reply
• 3.1k views
• 1 follower

Lion Wang

June 18, 20242 yr

Hi, First of all thanks for this awesome product, BananaPi M7 is really great in many ways! Only one last thing appears to be broken on our project, I'm having connection troubles from IoT in 2.4Ghz against BananaPi setup as an AP.I'm using the latest up to date armbian server image $ uname -a Linux bananapim7 6.1.75-vendor-rk35xx #1 SMP Tue Nov 12 08:48:32 UTC 2024 aarch64 aarch64 aarch64 GNU/Linux $ cat /etc/*release # PLEASE DO NOT EDIT THIS FILE BOARD=bananapim7 BOARD_NAME="Banana Pi M7" BOARDFAMILY=rockchip-rk3588 BUILD_REPOSITORY_URL=https://github.com/armbian/build BUILD_REPOSITORY_COMMIT=26d182157 LINUXFAMILY=rk35xx ARCH=arm64 BOOT_SOC=rk3588 IMA…

• 0

  Reputation Points

• 3 replies
• 2.8k views

Armbian42

November 29, 20241 yr

The ap6275p WiFi hotspot fails to open. The ap6275p itself supports the ap mode. image：Armbian_24.5.5_Bananapim7_bookworm_vendor_6.1.75_cinnamon_desktop.img sudo create_ap -m nat wlan0 enP2p33s0 armsom armsom-jack --no-virt --freq-band 5 Failed to get phy interface ERROR: Your adapter does not support AP (master) mode We used joshua-Riek/ubuntu-rockchip's ubuntu system which supports ap and has been connected normally

• 0

  Reputation Points

• 3 replies
• 2.8k views

armsom-jackson

August 13, 20242 yr

Hi, I am using rockpro64 "https://www.pine64.org/?product=rockpro64-4gb-single-board-computer" that uses Rockchip RK3399 Hexa-Core (dual ARM Cortex A72 and quad ARM Cortex A53) 64-Bit Processor. My simple application is to have a UART communication. When i run serial write with 1500000 Baudrate, then it works fine. But if i lower the baudrate such as 115200, then it throws garbage value. So can i get some suggestions here? Thanks.

• 0

  Reputation Points

• 4 replies
• 6.5k views

chwe

January 16, 20197 yr

Has anyone run a comparison benchmark of Armbian vs. the Orange pi versions of Debian and Ubuntu? ...Curious to see the results of optimizations.

• 1

  Reputation Points

• 1 reply
• 3.3k views
• 1 follower

wyim

March 3, 20233 yr

hai, im planning to upgrade my local media server to use an external hard drive attached using hard drive docking on USB 3.0 what I'm confused about is. what is the best FileSystem format for my hard drive? I'm not planning to unmount and use the hard drive to another PC (for example: windows PC) So I'm ready to format it with FileSystem that fully optimizes on Linux (I'm using armbian noble) so ext4 or xfs? I hear xfs is better for copying large file sizes. my casual use is downloading movies, and watching it on jellyfin. or maybe I'm just using ext4?

• 0

  Reputation Points

• 1 reply
• 3.2k views
• 1 follower

Marco Schirrmeister

August 6, 20242 yr

I've been trying to configure the HDMI screen I purchased for the orange pi 5. It's listed to work with the raspberry pi so I figured it should work with the orange pi 5 as well. When I connect the screen, the screen just turns white. These instructions were included in the manual to configure the usage of the screen with the raspberry pi, but I am not familiar with how to translate the configuration into armbian. Write the image to the TF card, then modify the following configuration in config.txt: # uncomment to force a specific HDMI mode (this will force VGA) hdmi_group=2 hdmi_mode=87 hdmi_cvt 1024 600 60 6 0 0 0 # unc…

• 1

  Reputation Points

• 23 replies
• 19.2k views
• 2 followers

J.Ayuso

June 2Jun 2

I used sudo swapoff -a as suggested in this thread: but the setting isn't persisted, and upon reboot sudo swapon --summary shows a partition There's no "swap" text in my /etc/fstab I'm trying to install Kubernetes, so I need to disable swap.

• 0

  Reputation Points

• 1 reply
• 4.5k views

trip

April 10, 20206 yr

Hi! I'm using armbian Jammy on my orange pi 5 with installed xfce desktop. I'm trying to connect it to a small HDMI screen and it doesn't work. It shows "no signal". I tried to use another screen (different model, resolution, manufacturer etc.) and it works. Then I tried to use non working screen with jetson nano and it works without any actions. So, the problem is with orange pi with armbian and this specific screen. Here is the result of "xrandr -display :0" launched trough ssh: Screen 0: minimum 320 x 200, current 1024 x 600, maximum 16384 x 16384 HDMI-1 connected primary 1024x600+0+0 (normal left inverted right x axis y axis) 476mm x 268mm 1024…

• 0

  Reputation Points

• 2 replies
• 3.5k views

DmitryS

September 4, 20233 yr

Connecting a usb keyboard doesn't seem to work with 7.1 .. [ 2.836541] usb 7-1: new full-speed USB device number 2 using ohci-platform [ 3.024538] usb 7-1: device descriptor read/64, error -62 [ 3.304535] usb 7-1: device descriptor read/64, error -62 [ 3.596542] usb 7-1: new full-speed USB device number 3 using ohci-platform [ 3.780527] usb 7-1: device descriptor read/64, error -62 [ 4.076543] usb 7-1: device descriptor read/64, error -62 [ 4.180566] usb usb7-port1: attempt power cycle [ 4.372529] usb 7-1: new full-speed USB device number 4 using ohci-platform [ 4.780541] usb 7-1: device not accepting address 4, error -62 [ 4.96452…

• 1

  Reputation Points

• 8 replies
• 1.8k views

j0ta

June 3Jun 3

I'm unable to activate bluetooth in the armbian build above. Confirmed bluetooth working in the vendor radxa bookworm xfce build. Here's what I see in dmesg that may be relevant: ... [ 9.329177] kernel: Bluetooth: Core ver 2.22 [ 9.329247] kernel: NET: Registered PF_BLUETOOTH protocol family [ 9.329261] kernel: Bluetooth: HCI device and connection manager initialized [ 9.329281] kernel: Bluetooth: HCI socket layer initialized [ 9.329296] kernel: Bluetooth: L2CAP socket layer initialized [ 9.329337] kernel: Bluetooth: SCO socket layer initialized ... [ 11.165207] kernel: [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: u…

• 0

  Reputation Points

• 4 replies
• 6.5k views
• 1 follower

yuki Orikasa

July 15, 20251 yr

Hello ! Not found any devices How to make it work? hciconfig -a hci0: Type: Primary Bus: USB BD Address: E8:48:B8:C8:20:00 ACL MTU: 1021:6 SCO MTU: 255:12 UP RUNNING PSCAN RX bytes:1537 acl:0 sco:0 events:148 errors:0 TX bytes:3430 acl:0 sco:0 commands:136 errors:0 Features: 0xff 0xff 0xff 0xfe 0xdb 0xfd 0x7b 0x87 Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3 Link policy: RSWITCH HOLD SNIFF PARK Link mode: PERIPHERAL ACCEPT Name: 'orangepi5' Class: 0x000000 Service Classes: Unspecified Device Class: Misce…

• 0

  Reputation Points

• 1 reply
• 2.8k views
• 1 follower

Michael Robinson

March 22, 20242 yr

hello guys bluetooth stopped working uname -a Linux pinebook 5.15.76-rockchip64 #22.08.8 SMP PREEMPT Sun Oct 30 10:57:32 CET 2022 aarch64 GNU/Linux dmesg | grep Bluetooth [ 9.863147] Bluetooth: Core ver 2.22 [ 9.863249] Bluetooth: HCI device and connection manager initialized [ 9.863261] Bluetooth: HCI socket layer initialized [ 9.863266] Bluetooth: L2CAP socket layer initialized [ 9.863276] Bluetooth: SCO socket layer initialized [ 9.972130] Bluetooth: HCI UART driver ver 2.3 [ 9.972144] Bluetooth: HCI UART protocol H4 registered [ 9.972147] Bluetooth: HCI UART protocol BCSP registered [ 9.972218…

• 0

  Reputation Points

• 7 replies
• 6.5k views
• 3 followers

ckohn

February 21, 20233 yr

Hi Please, find below my current Armbian version in OPI5: Armbian_23.5.5_Orangepi5-plus_jammy_legacy_5.10.160_cinnamon_desktop I’m having a few issues with Orange pi 5 Plus. Wifi/Bluetooth issues: I bought this WIFI/Bluethooth model (RTL8852BE) ( Link ) Bluetooth: When I try finding a new dispositive does not find anyone. However, it’s working with Ubuntu. WIFI: I did not have any problem with SDcard but the NVME gave me wifi problems sometimes when I updated it with “apt upgrade”. Then, the wifi does not work and I have to reboot and switch off bluetooth to make the wifi work. I…

• 0

  Reputation Points

• 1 reply
• 6.1k views

socal

August 14, 20233 yr

Hello all, I have noticed that whenever I reboot my Orange Pi 5 board, all the 8 cpus slow down to 408 Mhz with no range, as stated by cpufreq-info: I have created a cronjob script in order to bring the frequency back to acceptable range. I don't even know if this is the correct way to solve this, but I am running the following: echo performance | sudo tee /sys/devices/platform/dmc/devfreq/dmc/governor cpufreq-set -c 0 -u 1800000 cpufreq-set -c 4 -u 2260000 cpufreq-set -c 6 -u 2300000 cpufreq-set -c 0 -g schedutil cpufreq-set -c 4 -g schedutil cpufreq-set -c 6 -g schedutil However, even though I set the frequency for processo…

• 0

  Reputation Points

• 2 replies
• 2.8k views

pdieguez

October 20, 20241 yr

Hey there, I now have my Nanopi R4S for quite a while but never got it to run stable over a longer period of time. Now I finally connected another board to its debug serial in the hopes to catch something that causes the board to freeze. Well this is what I have collected: https://p.na4.eu/?bc818aefadc9b5b2#DAunYKXghkaqcLhh8SLWMKTWABewpwPJRnHMHDemR98Y The log is complete, there is nothing missing between 08:51 and 19:14. This is how I collected it. Basically during the state of throwing errors the board becomes unresponsitive and continously heats up. Active cooling was in place so no danger of overheating. https:/…

• 0

  Reputation Points

• 0 replies
• 2.1k views

Werner

April 10, 20233 yr

Hi all I hava an orange pi 5 plus with a 512GO NVME SSD. I have installed the latest version od Armbian to a SD card it work well, but for speed reason i would like to install the OS to th SSD drive and boot from this device and no longer from the SD card. Is there a way to do this ? i mean from u-boot point of view? i can keep a SD card inside it to store u boot but i would like to move usr var and such to SSD Thanks in advance for your answers comment or ideas W.

• 0

  Reputation Points

• 3 replies
• 4.9k views
• 1 follower

William Bonnet

June 13, 20242 yr

i also have issues to move the system to the nvme ssd 😞 my base is the Armbian 25.5.1 with 6.1.115 (vendor kernel) image .... "copied" (usbimager) it to the sdcard and its booting ... 🙂 so I upgraded the system on the sdcard, still running 🙂 I read some posts and advices .... so I partioned the nvme with one big partition (/dev/nvme0n1p1) running armbian-install choosing option 7, (loading/upgrading bootloader to mtd ) after this i choose option 4 (boot from mtd, system on sata, usb ... ) only possible selection was /dev/nvme0n1 ... looked ok said yes to everything no Error system goes to shutdown /power off …

• 0

  Reputation Points

• 10 replies
• 10.7k views

H_Berger

July 24, 20251 yr

Hi, after find out that the usb-connector right so have I tried install on a usb3-sata-m2 disk, I have problem to install. I created partision on the usb-disk with ambian-install, and after that trying to select 8 (download and install clean image), but it can't find any image for my board. I have no eMMC on my 4GB ram radaxa zero 3Wso I run from SD-card.

• 0

  Reputation Points

• 0 replies
• 2.2k views

Johan Nilsson

February 13Feb 13