Rockchip

Is it possible to load the A72 cortex with more computation work compared to A53 cortex? Specially during multithreading can i generate more cores on A72 cortex as it is significantly faster? While compiling there is a flag to select the appropriate cortex (-mtune=cortex-a72.cortex-a53) but it only generates appropriate cortex code. Any way to control these cortex based on the application?

• 0

  Reputation Points

• 3 replies
• 3.7k views
• 1 follower

ViltusVilks

February 19, 20188 yr

I was using the nightly version 23.02.2 but now the repos have changed. How can I update to the new nightly repo os ? https://github.com/armbian/os # PLEASE DO NOT EDIT THIS FILE BOARD=odroidm1 BOARD_NAME="ODROID M1" BOARDFAMILY=rk3568-odroid BUILD_REPOSITORY_URL=https://github.com/armbian/build BUILD_REPOSITORY_COMMIT=1a8daf0 VERSION=23.02.2 LINUXFAMILY=rk3568-odroid ARCH=arm64 IMAGE_TYPE=nightly BOARD_TYPE=wip INITRD_ARCH=arm64 KERNEL_IMAGE_TYPE=Image BRANCH=edge Thanks !

• 0

  Reputation Points

• 2 replies
• 3.7k views

j0ta

March 1, 20233 yr

Video demonstrating issues reconnecting to Wi-Fi please help

• 0

  Reputation Points

• 7 replies
• 3.7k views

Igor

March 13, 20188 yr

May I ask where to add and place the background image？？ help.....

• 0

  Reputation Points

• 6 replies
• 3.7k views

Werner

September 5, 20242 yr

I am running Ubuntu 24.04 Noble (Armbian Linux 6.1.115-vendor-rk35xx) and no additional packages affecting VPU performance have been installed; everything is stock. Jellyfin is running in Docker, and transcoding works perfectly, except for some movies. I tried to play a 4K video in Chrome (native HEVC support), set the bitrate to 40mbps, and the video played normally at a transcoding speed of about 3x, but after a while, Orange Pi crashed. In Firefox inside neko (where there is no hardware acceleration and HEVC), the crash happened even faster, after ~2 seconds of playback. The crash happens as if the board loses power: journalctl is not saved, nothing is …

• 0

  Reputation Points

• 3 replies
• 3.7k views
• 1 follower

Ritz

September 4Sep 4

I have a couple Orange Pi's, and the HDMI is broken. I noticed that many believe that it is Armbian, but it is not. Orange Pi's probably won't be where we want them until 2025. I found a couple notes from development teams, one below and one from September. Both say the same thing: essentially it's in the works: "The RK3588 SoC family integrates the newer Synopsys DesignWare HDMI 2.1 Quad-Pixel (QP) TX controller IP and a HDMI/eDP TX Combo PHY based on a Samsung IP block. Add just the basic support for now, i.e. RGB output up to 4K@60Hz, without audio, CEC or any of the HDMI 2.1 specific features." https://patchwork.kernel.org/project/linux-rockchip/pa…

• 0

  Reputation Points

• 1 reply
• 3.7k views

ozacas

October 10, 20242 yr

hello! Can help me about orange 3b, I want to adapt one dts file to my board, how to correctly indicate the names of the pins, the example gives the following sample entry: https://mjmwired.net/kernel/Documentation/devicetree/bindings/display/panel/sitronix,st7701.txt reset-gpios = <&pio 3 24 GPIO_ACTIVE_HIGH>; /* LCD-RST: PD24 */ how to correctly fix this for my board?

• 0

  Reputation Points

• 5 replies
• 3.7k views
• 1 follower

maximilian fletkar

November 28, 20241 yr

Armbian 23.08.0-trunk Bookworm with Linux 5.10.160-rk35xx root@orangepi5-plus:~# gpio -v gpio version: 2.46 Copyright (c) 2012-2018 Gordon Henderson This is free software with ABSOLUTELY NO WARRANTY. For details type: gpio -warranty * Device tree is enabled. *--> Orange Pi 5 Plus root@orangepi5-plus:~# gpio readall wiringPiSetup: mmap (GPIO) failed: Operation not permitted

• 0

  Reputation Points

• 3 replies
• 3.6k views
• 1 follower

royk

September 8, 20233 yr

I got wierd screen blinking after update kernel from 5.8.18-rockchip to 5.9.14-rockchip. Here is blurry video with screen blinking. My screen resolution is 1600x900 and i'm using HDMI-to-VGA adapter. All was working fine with kernel 5.8.18-rockchip. I still can connect to sbc via ssh, so I checked kernel version, install old one and blinking gone: q@tinkerboard:/var/cache/apt/archives$ uname -a Linux tinkerboard 5.9.14-rockchip #20.11.3 SMP PREEMPT Fri Dec 11 22:00:29 CET 2020 armv7l armv7l armv7l GNU/Linux q@tinkerboard:/var/cache/apt/archives$ dpkg-deb -I linux-image-current-rockchip_20.11_armhf.deb new Debian package, version 2.0.…

• 0

  Reputation Points

• 1 reply
• 3.6k views
• 1 follower

jock

December 15, 20205 yr

The Libre Computer Renegade RK3328 has hardware AES support. Should it not be listed by `lsmod` if the module is activated? $ grep aes /proc/cpuinfo Features : fp asimd evtstrm aes pmull sha1 sha2 crc32 cpuid Features : fp asimd evtstrm aes pmull sha1 sha2 crc32 cpuid Features : fp asimd evtstrm aes pmull sha1 sha2 crc32 cpuid Features : fp asimd evtstrm aes pmull sha1 sha2 crc32 cpuid $ lsmod | grep aes $ How can one verify that the AES chip is being utilized? I'm on the Armbian 22.11 Jammy release (Kernel 5.15.y, Release date: Nov 30, 2022).

• 0

  Reputation Points

• 3 replies
• 3.6k views
• 1 follower

MBC

October 26, 20232 yr

My current TV doesn't have CEC but I'm planning to replace it with something that has CEC support and would really like to automate the on/off thing... Is cec-utils supported or is there an alternate kernel API?

• 0

  Reputation Points

• 2 replies
• 3.6k views
• 1 follower

OttawaHacker

March 18, 20242 yr

Hi, I'll install OpenMediaVault and Nextcloud on a tinkerboard and I would like to know if there is any advantage on run system on SATA / USB in this case and if it is possible to do this on tinkerboard since it was not clear for me on the docs. Thank you

• 0

  Reputation Points

• 1 reply
• 3.6k views
• 1 follower

xAda

January 26, 20233 yr

Hi, this week my Rock 5 ITX+ board arrived and I started installing Armbian with vendor kernel (now on 6.1.99-vendor-rk35xx). This board has slightly different hardware than the original ITX. It has two M.2 M-key (2-lanes) instead of one M.2 M-key and four SATA ports. I think because of the different hardware configuration the DTB has to be changed as no SATA controller is present on the board. With the ITX DTB I am experiencing problems with not regonizing NVME disks when activating ASPM in armbianEnv.txt. I have no experience in editing DTBs or applying patches, so I need help to figure out what to do to make things work. …

• 0

  Reputation Points

• 2 replies
• 3.6k views
• 1 follower

Malz

March 3, 20251 yr

In case anyone wondering, AIC8800D80 found in Raxda Zero 3W and Radxa Cubie A5E (aic8800 driver) supports WPA3 SAE, but not GCMP/GCMP-256 ciphers. root@radxa-zero3:~# iw phy Wiphy phy0 wiphy index: 0 max # scan SSIDs: 3 max scan IEs length: 200 bytes max # sched scan SSIDs: 0 max # match sets: 0 Retry short limit: 7 Retry long limit: 4 Coverage class: 0 (up to 0m) Device supports RSN-IBSS. Device supports AP-side u-APSD. Supported Ciphers: * WEP40 (00-0f-ac:1) * WEP104 (00-0f-ac:5) * TKIP (00-0f-ac:2) * CCMP-128 …

• 0

  Reputation Points

• 1 reply
• 3.6k views
• 1 follower

laibsch

August 22, 20251 yr

Is it possible to use the onboard microphone of Orange Pi 5 on Armbian? It does not seem to turn on

• 1

  Reputation Points

• 4 replies
• 3.6k views
• 2 followers

BOFFBOY

February 28, 20242 yr

Hello, I would like to have dual boot with a startup menu similar to GRUB on a PC, the idea is to have Android installed on the eMMC and Ubuntu on the NVMe, I am referring to an Orange Pi 5 Plus. Has anyone gotten it or is working on it? Thank you

• 0

  Reputation Points

• 1 reply
• 3.6k views

ozacas

October 1, 20242 yr

Why does HDMI Audio work on Debian 12 Bookworm 6.1 version and not on Debian 12 Bookworm 6.12? I have updated to latest version and still no HDMI audio. Is there a patch or something i can do to fix this?

• 0

  Reputation Points

• 7 replies
• 3.6k views
• 1 follower

7alken

July 25, 20251 yr

Hello, currently on Rock5B running Armbian 24, I am not seeing the U-Boot output logs during UART debugging. Where in the source code can I enable this? Thank you.

• 0

  Reputation Points

• 3 replies
• 3.6k views

eselarm

November 29, 20241 yr

Hey guys, i want help to install anydesk in tinker board with armbian focal

• 0

  Reputation Points

• 1 reply
• 3.6k views
• 1 follower

Werner

January 27, 20215 yr

Hi all Armbian fans, As of today, I checked officially platinum supported Armbian version for Orange Pi 5. I was amazed how low performing is armbian image. I was using latest armbian with HW install procedure at: https://redirect.armbian.com/orangepi5/Jammy_legacy_gnome , and Ubuntu from https://github.com/Joshua-Riek/ubuntu-orange-pi5/releases/download/v1.11/ubuntu-22.04-preinstalled-desktop-arm64-orange-pi5.img.xz Both glxinfo -B says: Accelerated : yes Armbian glmark2 Score: 705 Ubuntu glmark2 Score: 1285 Difference is HUGE When we could expect any "normal" Mali…

• 0

  Reputation Points

• 1 reply
• 3.6k views

royk

April 10, 20233 yr

Hello, I have installed the Armbian 26.2 minimal IOT image based on Debian 13 Trixie - with the 6.18.x kernel - and I noticed the USB2 port (the single, vertical port next to the Ethernet port) is not working. Is this a limitation of the mainstream kernel (6.18.x) - i.e. does this work only with the vendor kernel (6.1.x) ? NB: I upgraded to 6.19 using the 'edge' kernel, but I'm seeing the same behavior. Here's the armbianmonitor outpur - https://paste.armbian.com/raw/udefojuxuk

• 1

  Reputation Points

• 13 replies
• 3.6k views
• 1 follower

deskwizard

August 16Aug 16

Hey there, first of all: THANKS for the armbian project! My issue is with an M1, fresh jammy xfce install on an sd-card. NVME is installed (can be accessed after mounting it manually, no issues there) Wishing to move system to this /dev/nvme0n1, keeping boot on the sdcard, as I understand this being the only viable option, currently. When using armbian-install, selectin option 1 "Boot from SD - system on SATA, USB or NVMe" and confiming, next is an error message: --- There is not enough free capacity on /dev/nvme0n1. Please check your device. --- Did so, tried creating an empty (…

• 0

  Reputation Points

• 2 replies
• 3.6k views
• 1 follower

_Rygelius_

March 19, 20233 yr

Hi, after upgrading to Armbian 24.11.3 noble with 6.1 Kernel I have this problem that every time I turn off my TV that is connected to OPI with HDMI, then turning it back on again it will never have a HDMI signal. Same thing happens when I unplug the HDMI cable and plug it back in. I can reproduce it every single time - not just occasionally. It is not a hardware or cable problem, the exact same setup has worked flawlessly for long time with older Armbian and 5.1 kernel. I tried disabling all of the KDE power saving settings, also totally disabled kpowerdevil - with no change. SSH still works fine, the OS has not crashed. …

• 0

  Reputation Points

• 3 replies
• 3.6k views

martivo

February 7, 20251 yr

In our testing, when attempting to use various Wi-Fi mini-PCIe/M.2 adapters from Intel and Realtek, we've encountered problem: oftentimes OS will not see PCIe device with error "PCIe link training gen1 timeout". Some days it happens only in 1/10 boots, other days it can stop working completely. After long debugging we've found that 24-pin FPC cable that connects Orangepi and official connector board (PCIE-SOCKET-OPI4-4B) does not pass PERST signal from Orangepi. Instead, it is high by default and the only way to temporarily set it to low is by pressing physical button on connector board. As far as I understand, PERST signal basically tells the connected de…

• 0

  Reputation Points

• 0 replies
• 3.6k views

ArXen42

April 19, 20251 yr

Hi friends, back to the Gnome version which works incredibly well It works so well that I put my big desktop tower away and have been getting by strictly on this Armbian Gnome environment. I will be donating to Armbian soon However, I am curious, does anybody know how to fix the resume from suspend? For me, the computer goes into suspend mode just fine, but when I tap a keyboard key, the LED's will light on the keyboard indicating they have power, but the system never comes back. If I press the power button on the Orange Pi 5 itself, the system resumes perfectly -- no crashes, everything works as intended I just need it to …

• 0

  Reputation Points

• 8 replies
• 3.6k views
• 1 follower

snow

August 20, 20251 yr

Hello, I'm trying to connect a MIPI DSI display. Currently, backlight is working, but not the display in Armbian (Armbian 25.5.1 Noble Gnome). DTS is loaded and corresponding kernel module panel-simple-dsi is loaded as well. Same DTS works on the official Radxa 5c image (rock-5c_bookworm_kde_b2) (kernel 6.1.43-15) Has anyone faced a similar issue? armbianmonitor -u : https://paste.armbian.com/ocoperohak.yaml Thanks!

• 1

  Reputation Points

• 4 replies
• 3.5k views
• 1 follower

royk

August 18, 20251 yr

Whats the correct way to get the Armbian build to spit boot out as a separate fat partition at the start of the image? Im just getting started with Armbian (on tinker board) and want to integrate it into by own build system. I need to generates SD card images with 3 different configs building 3 separate installs sharing a common multiboot 512MB fat boot partition. I dont need the Armbian build to do the multiboot or manage the boot partition at all, I just want to be able to extract the root & boot fs at the end of the build process.

• 0

  Reputation Points

• 0 replies
• 3.5k views
• 1 follower

botfap

September 28, 20179 yr

Board is RockPro64, legacy kernel - 4.4.213-rockchip64. The issue is this: [ 1451.681339] ohci-platform fe3a0000.usb: frame counter not updating; disabled [ 1451.681972] ohci-platform fe3a0000.usb: HC died; cleaning up [ 1451.682516] usb 8-1: usbfs: usb_submit_urb returned -19 [ 1451.682569] usb 8-1: USB disconnect, device number 2 It happens only on the USB2.0 ports with different keyboards, mice, custom USB HID device, webcam. The other 2x USB 3.0 ports are working fine with the same devices. Tried fixes so far - turning usbcore.autosuspend option off, adding usbhid.quirks for every device. extraargs=usbcore.autosuspend=-1 usbhid.qu…

• 0

  Reputation Points

• 1 reply
• 3.5k views

Pencheff

December 19, 20205 yr

Hello everybody! I need help: I can't turn on the SPI interface in any way so that /dev/spidev0 or /dev/spidev1 appears. In armbian-config, there are generally only 7 lines in the hardware section, in which there is nothing interesting, an attempt to register spidev in armbianEnv.txt it also does not help, in dmesg and journalctl - silence... Where did the interface go?

• 0

  Reputation Points

• 3 replies
• 3.5k views

solaris3308

December 30, 2025Dec 30

I have add user dtbo with "armbian-add-overlay rk3308-w1-gpio.dts" but it's NOT work.Some message is shown as below: pi@Pi-S:/boot/overlay-user$ dmesg | grep gpio [ 0.063257] OF: /onewire@0: could not get #gpio-cells for /usb@ff400000 [ 0.096538] rockchip-gpio ff220000.gpio: probed /pinctrl/gpio@ff220000 [ 0.097838] rockchip-gpio ff230000.gpio: probed /pinctrl/gpio@ff230000 [ 0.099097] rockchip-gpio ff240000.gpio: probed /pinctrl/gpio@ff240000 [ 0.100300] rockchip-gpio ff250000.gpio: probed /pinctrl/gpio@ff250000 [ 0.101462] rockchip-gpio ff260000.gpio: probed /pinctrl/gpio@ff260000 [ 8.818566] gpio-17 (onewire@0): enforced open dra…

• 1

  Reputation Points

• 3 replies
• 3.5k views
• 1 follower

solaris3308

October 16, 20232 yr

Hello! I've been using Armbian on my newly bought Tinker Board for less than two weeks now and I've to say that the work you guys have put into this is incredible! It truly is remarkable and inspires us newcomers which haven't started studying computer science or are currently studying - as myself. So, I will definitely contribute and help others in the future to increase the Armbian community! However, as I'm new to Unix, Tinker Board, everything that's not Windows or Mac OS, I've a deep learning curve ahead! Let's start with my setup: Build: ARMBIAN 5.32.170921 nightly Ubuntu 16.04.3 LTS 4.14.0-rc1-rockchip (I know it's nightly so there are bugs, ye…

• 0

  Reputation Points

• 4 replies
• 3.5k views

Z11ntal33r

September 21, 20179 yr

Only "chirps and chips" come through during extended playback. Only hdmisound device is affected, not analog. Duplicate of improperly "resolved" thread Armbian 22.02 Bullseye Kernel 5.15.25-rockchip64 Armbian 22.02 Bullseye Kernel 5.16.16-rockchip64 working in 5.10.60-rockchip64 steps to reproduce: aplay -D plughw:1,0 /usr/share/sounds/alsa/Front_Right.wav dmesg | grep es83 [ 10.077582] es8316 1-0011: Failed to get IRQ 0: -22 card 0: Analog [Analog], device 0: ff890000.i2s-ES8316 HiFi ES8316 HiFi-0 [ff890000.i2s-ES8316 HiFi ES8316 HiFi-0] Subdevices: 0/1 Subdevice #0: subdevice #0 card 1: hdm…

• 0

  Reputation Points

• 2 replies
• 3.5k views
• 1 follower

hege

May 30, 20224 yr

So those of us working on getting Retro Pie working on the Tinkerboard have run into a road block. Perhaps someone here might have a clue on this? Current using these instructions to build Retro Pie using the legacy Armbian Debian (4.4) https://github.com/Tinkerpie/Armbian-Setup And for audio over HDMI you need to currently make a change in /usr/share/alsa/alsa.conf setting defaults.pcm.card to 1 When this script linked down below: https://github.com/Rydra/bgm-for-es The BGM script takes over all audio so for instance the audio in games does not work or any other audio such as audio from the video sna…

• 0

  Reputation Points

• 0 replies
• 3.5k views
• 1 follower

AngryManMLS

May 17, 20188 yr

Hi all experts, This is a serious issue for me as for one of the project i am using more than 20 numbers of rockpro64. I have installed them in my different locations of office. I have used two types of OS- *) LXDE-ubuntu-0.7.9-1067-arm64 *) bionic-containers-rockpro64-0.8.3-1141-arm64 Issue is- Whenever i flash these images to rockpro64, for some days autoboot works well such as if light goes and comes back then machines auto boot itself but after few days, auto boot does not happens with few machines and i have to press the "power button" to boot up. I thought with latest OS this issue will solve but same result with latest OS. …

• 0

  Reputation Points

• 2 replies
• 3.5k views

Rahul

October 3, 20197 yr

Hi there, I wanted to know if anyone know if there are any power limits from the SATA power ports, the question is can you power 1 or more 3.5" NAS disks at the same time? Or as a precaution, I take power from the PSU? Thanks, Dany

• 1

  Reputation Points

• 3 replies
• 3.5k views
• 2 followers

ozacas

November 19, 20241 yr

Yesterday I was happy to see the new and fresh Armbian release for the Rock 5 ITX after about 1 year from the last update. I also tried the Armbian Imager and the SD creation was very easy and smooth. I selected the recommended release based on Ubuntu 24.04 + Gnome desktop. Unfortunately when the desktop was about to start, everything when black, stucked and zero interface. On the other hand, the OS is alive and I can connect remotely via SSH. Did anyone have the same problem? Possible solution? [EDIT]. sudo systemctl restart gdm and desktop pops up. Restarting the system, black again.

• 1

  Reputation Points

• 5 replies
• 3.5k views

DavidFajardo

February 20Feb 20

On the ROCK 5B+, I am getting the following error at boot [ 12.361648] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 12.389297] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 12.390688] cfg80211: Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600' [ 12.392699] cfg80211: loaded regulatory.db is malformed or signature is missing/invalid I believe this is the cause of being unable to set the regulatory region for WiFi. Running sudo iw reg get returns global country 00: DFS-UNSET even after running sudo iw reg set GB

• 0

  Reputation Points

• 3 replies
• 3.5k views
• 1 follower

MichaIng

June 1, 20251 yr

I somewhat recently used Armbian Build to compile a desktop Bookworm image, which is quite stable and functional except for EMMC support. Packages: Debian stable (bookworm) Support: DIY (custom image) Linux Atlas 6.1.84-vendor-rk35xx #1 SMP Tue Dec 24 13:36:04 UTC 2024 aarch64 GNU/Linux My question is where can one find the current status of the various kernel versions support for features like I2C, SPI, EMMC, MESA, etc.? I recognize that newer kernels like 6.12.yyy are very much a WIP. I also would love more information on the the RK3588 kit used with kernels to backport features.

• 0

  Reputation Points

• 1 reply
• 3.5k views
• 2 followers

Werner

January 8, 20251 yr

Howdy, I am in desperate need of help getting this dang usb wifi dongle working on my orange pi 5. I am new to sbc and fiarly new to linux. I have tried multiple github drivers with freash OS installs, all to no avail. Time spent trying to get it to work is reaching close 20 hours, across multiple forums, github searches, videos, linux how to site, and armbian site itself. I'm either missing something or an idiot cause i can't figure out this "make" or "dkms" command stuff out for compiling the driver and installing it. My last resort is asking for y'all for help before i feed this thing to my dog... "joke". My most recent attempt is from the git h…

• 0

  Reputation Points

• 3 replies
• 3.5k views
• 2 followers

MarcAndro

February 25, 20233 yr

Hi. I would like to download last armbian image for my Asus tinkerboard, but all download links broken: https://www.armbian.com/tinkerboard/ Can you fix that? I found Armbian_20.08.1_Tinkerboard_focal_current_5.8.6_desktop.img.xz here: https://armbian.tnahosting.net/archive/tinkerboard/archive/ Is that latest one?

• 0

  Reputation Points

• 2 replies
• 3.5k views

q4a

November 11, 20205 yr

Hello people, I have an Asus Tinker Board S and decided to use the Mainline Armbian for this board, love the new panfrost driver but seems it is glitching all over the place, icons in the menu disappear and reappear when mouse hovers over them, tick boxes do not show if they are ticked and only flicker when mouse is over them and applications menu keep redrawing all over when trying to use among the most prominent problems. Other operating systems work well in this matter. Anyone else is having these problems with the mainline 5.4.28 kernel build?

• 0

  Reputation Points

• 1 reply
• 3.5k views

Nikos Giannakas

June 10, 20206 yr

I've downloaded the Armbian 25.5.1 (Kernel 6.12) Home Assistant image (https://dl.armbian.com/orangepi5-plus/Bookworm_current_minimal-homeassistant), burned to microsd and rebooted the orange pi 5 plus. I burned the image to a microsd cards, inserted the microsd and did a hard reboot of the SBC. The error message is "Gave up waiting for root filesystem device."

• 0

  Reputation Points

• 7 replies
• 3.5k views

Igor

July 30, 20251 yr

I'm using a kernel built from sources as there's another bug which the github sources resolve. The bundled kernel with the OS image does not kernel panic. (However this image only has around a 5% chance of mounting any nvme drive) Output: Dump from 'armbianmonitor -U' https://tmpfiles.org/dl/314994/dump.txt.tar (The Armbian self-hosted system seems to be a bit moody when it wants to work)

• 0

  Reputation Points

• 1 reply
• 3.5k views
• 1 follower

jock

November 26, 20223 yr

Hello, Has anyone managed to get usb-redirector working? 4.14.70-rockchip and headers. with 'arm' It installs ok, and the driver loads... lsmod and dmesg confirms. Module Size Used by tusbd 126976 0 but when I try one the binaries, it just returns me back to the prompt.??? (i've tried other versions arm-eabi. armeb, that just returns file not found when using a binary) Many thanks. Mark

• 0

  Reputation Points

• 5 replies
• 3.5k views

MarkA007

March 14, 20197 yr

Hi! I'm using armbian Jammy on my orange pi 5 with installed xfce desktop. I'm trying to connect it to a small HDMI screen and it doesn't work. It shows "no signal". I tried to use another screen (different model, resolution, manufacturer etc.) and it works. Then I tried to use non working screen with jetson nano and it works without any actions. So, the problem is with orange pi with armbian and this specific screen. Here is the result of "xrandr -display :0" launched trough ssh: Screen 0: minimum 320 x 200, current 1024 x 600, maximum 16384 x 16384 HDMI-1 connected primary 1024x600+0+0 (normal left inverted right x axis y axis) 476mm x 268mm 1024…

• 0

  Reputation Points

• 2 replies
• 3.5k views

DmitryS

September 4, 20233 yr

Hello! Iv'e just done a test run installing Armbian for booting off my new m.2 nvme drive. As 'm planning to have the drives 2nd large partition as my basic home file server I'm wondering if I can as easily re-install the OS if/when I need to update it to a newer one? Because the instructions I followed and that I see around do a very basic cat /dev/mmcblk1 > /dev/nvme0n1 onto the raw un-partitioned nvme. My case will be that I have data on a partition on that drive that needs to stay. Is this going to be an issue or are there ways to re-install Armbian or even other distro on the boot partition? Cheers!

• 0

  Reputation Points

• 2 replies
• 3.5k views

Fredrik

October 22, 20241 yr

HW: OrangePi5 Plus 32 32 GB RAM 512 GB NVME 5K Monitor Image: Armbian_25.8.1_Orangepi5-plus_trixie_vendor_6.1.115_xfce_desktop.img prepare system before each case dd if=u-boot-V2024.04-orangepi5-plus-spi.img of=/dev/mtdblock0 flash_erase /dev/mtd0 0 0 case 1: 1. copy image to 64GB uSD 2. booting 3. system comes up with xfce 4. sudo apt-get -y update; apt-get -y upgrade 5. reboot 6. system comes up, without desktop. system is reachable with ssh case 2: 1. copy image to 64GB uSD 2. booting 3. system comes up with xfce 4. armbian-install 5. choose boot from mtd flash 6. choose nvme0n1p1 6. update mtdbloc…

• 0

  Reputation Points

• 3 replies
• 3.5k views
• 1 follower

The Tall Man

September 25, 20251 yr

##O#O## OS: Armbian 25.8.1 noble aarch64 ####### Host: Orange Pi 5 Plus ########### Kernel: 6.1.115-vendor-rk35xx ############# Uptime: 1 day, 8 hours, 17 mins ############### Packages: 1852 (dpkg), 5 (snap) ################ Shell: bash 5.2.21 ################# Resolution: 3840x2160 ##################### DE: GNOME 46.0 ##################### WM: Mutter ################# WM Theme: Adwaita Theme: Adwaita [GTK2/3] Icons: Adwaita [GTK2/3] Terminal: x-terminal-emul CPU: (8) @ 1.800GHz …

• 0

  Reputation Points

• 1 reply
• 3.5k views

amazingfate

September 27, 20251 yr

Hi, After bleeding edge 6.8 or so, I lost HDMI output. Does anyone run the recent kernels with HDMI? Which ? The 6.1.75 kernel has HDMI, but a lacks Mt7961 wifi, and changing keyboard does not work, which probably is my lack of understanding of wayland. Gullik PS the HDMI issue might be a resolution thing, unfortunately I use an old TV ( 1920x1024)

• 0

  Reputation Points

• 4 replies
• 3.5k views

jyce

October 11, 20242 yr

I'm trying to set up a DS3231 hardware clock and the system can't find the hwclock command. I installed the util-linux command as other references suggested, but the command still isn't there. Thank you

• 0

  Reputation Points

• 1 reply
• 3.4k views
• 1 follower

Werner

December 12, 20241 yr

Hi, I am wanting to try running OPNsense under proxmox, but before that I wanted to setup the type-C port as a management port. I have added g_cdc in /etc/modules to load the kernel module and if I run a vendor kernel, it works fine. I plug my laptop in to the boards type-C port and it shows up as an ethernet adapter and I can SSH directly to the Rock 5 ITX. I however would like to use a mainline kernel instead as it generally runs better thanks to the amazing work of the community here. Running 6.12, this same functionality does not work and nothing appears in the network adapters on my laptop when plugging in. Looking on mainline-status, I see that the typ…

• 0

  Reputation Points

• 3 replies
• 3.4k views
• 2 followers

prahal

May 16, 20251 yr

Hello everybody. I own a Orange Pi 5 Plus with Debian and 3 partitions: boot, root and storage (fat, ext4, ext4). Now I want to try Armbian but I don't want to overwrite the storage partition, so I shoudn't use dd to write the .img file. Ant tip to solve this situation? Thanks.

• 0

  Reputation Points

• 4 replies
• 3.4k views
• 1 follower

Jose Francisco

July 5, 20242 yr

Hi! With I tinkerboard I installed the Ubuntu Desktop - legacy kernel. I wanted to try the linux-image-next-rockchip, but it had some problems (new IP address at each boot), so I wanted to go back to linux-image-rockchip. When I installed linux-image-rockchip, I got 4.4.73-rockchip and not 4.4.88-rockchip which I had before.

• 0

  Reputation Points

• 3 replies
• 3.4k views

Igor

October 3, 20179 yr

After installing official Armbian_25.2.1_Orangepi5-plus_bookworm_vendor_6.1.99_xfce_desktop.img to sdcard, then to nvme all is fine, until, I do an apt update & upgrade, after that point chromium fails to run. I explored the logs to see it a failure to load chromium.conf from /etc/chromium.d/chromium.config (failed symbolic link to /etc/armbian/chromium.config). Is there a known workaround besides utilization of firefox?

• 1

  Reputation Points

• 2 replies
• 3.4k views

Robert Pace

June 3, 20251 yr

Hi, has any of you some experience connecting a Hifiberry Amp+ to a Tinkerboard - on Hifiberry pages this is now a possible connecting but I miss a howto and would really appreciate a quick start on this. Have previously succeed with Raspberry 3 and IQaudio - but intend to take a step further and do a project being more than just an amplifier. After testing several OS I have to admit Armbian has become my favorite and it is within this OS I hope to achieve this.

• 0

  Reputation Points

• 1 reply
• 3.4k views

Andrius ok

February 23, 20188 yr

Hello and thanks for reading. I have done some digging before posting this so let me explain my issue and then what I have tried. I am using the Tinker Board S (via SD card, had same issue using EMMC img also) with the Bionic mainline kernel 4.14.y (in armbian config tool it shows Armbian 5.60 Stable ) on an LG 24LF452B montior/tv with the boards HDMI port and no adapters. I have been trying to set the display resolution to 1366X768 or as close to it (it does not appear in the display settings menu natively) but cant seem to make this work. The display works fine on other resolutions, except for horrible image because the wrong resolution, and can be used on 1366X768 …

• 0

  Reputation Points

• 0 replies
• 3.4k views
• 1 follower

Tinkerdan

November 3, 20187 yr

Hello, I would like to know more informations about this test made with the Asus XG-C100C Network Adapter or, generally, how to optimize the speed from a 10GbE PCIe Network Adapter in the RockPro64. Which version to use of Armbian and how to get that version to have so good performances? Which version of the Adapter driver to use? Were the drivers included in the Kernel or did you use the Asus driver recompiled? I would be very grateful if you will help me. Thank you.

• 0

  Reputation Points

• 1 reply
• 3.4k views

Tauro

January 21, 20233 yr

Hello, my development board is Rock5B, and I am using the Armbian system for a recent project. I have already compiled the firmware in the armbian/build/ directory, and the device starts up normally. I want to modify and customize my U-Boot and kernel. After compiling Armbian, I would like to recompile U-Boot or the kernel in the armbian/build/cache/sources directory. Are there any commands to rebuild U-Boot and the kernel?

• 0

  Reputation Points

• 2 replies
• 3.4k views
• 1 follower

lyh

November 25, 20241 yr

Hello, here with a Radxa Rock 5 ITX I experience endless loading at reboot after some system upgrades... But not always. Am I doing something wrong by using the command reboot from ssh ? instead of shutdown and power up ? In that case the system loads to rescue mode, asking for the root password and even if entered correctly does not identify. All comes back to working state with a shutdown and a reboot. Notice : I've made a donation to support the team. Please help.

• 0

  Reputation Points

• 7 replies
• 3.4k views

Werner

April 8, 20251 yr

Hi, I really like the new option to use DT Overlays on the tinkerboard. But right now I'm struggeling a little with it: I have an old installation with 5.60 which I updated to 5.70 via apt. But the /boot/boot.cmd is still the old one and the Overlays are not working. Maybe I'm blind, but I do not see, how to update u-boot and the boot.cmd as part of it via armbian-config. Can someone point me to the right direction? Thanks, Alex

• 0

  Reputation Points

• 2 replies
• 3.4k views

deimos

January 25, 20197 yr

Has anyone ever gotten the Radxa Zero 3w working in gadget mode? I bought a Zero 3w about a week ago and have been beating this horse most of the time. I can't get the device to connect via USB. A or C. When I try to connect (radxa.local) it will always go through wifi. If I have wlan0 disabled or even my internet off it just will NOT connect. It clearly is using wifi to connect even if I use the hostname. Maybe this is something simple but I and another engineer I work with have been scratching our heads about it. The obligatory AI search was an endless loop of everything we had already tried. Anybody have any advice?

• 0

  Reputation Points

• 0 replies
• 3.4k views

sterling1989

September 15, 20251 yr

and, BTW, this will probably work on any SBC that has pwm and working port of wiringPi (wiringOP is much simpler than the dtbo method, IMO) WHY: I don't like fans that run full speed ALL the time pwm fans are a bit limited on the ground in small size, and expensive The SBC has pwm pins, so why not use them none of the examples I have found are adequate, either gpio off/full or excessive python scripts, 40 lines or more,, the bash script is ~ 10 lines Some of the wiringOP/gpio packages don't work (ubuntu-full desktop) try the commands in rc.local, if they don't work, then,,, dpkg -l |grep wiring; apt remove ..... git clone https://github.com/orangepi-x…

• 0

  Reputation Points

• 0 replies
• 3.4k views

wdtz

January 18, 20242 yr

Dear team, On Armbian_25.11.1_Orangepi5-plus_trixie_current_6.12.58_minimal.img not possible to boot kernel, only u-boot seems available ? Bellow is the debug log on tty DDR V1.13 25cee80c4f cym 23/08/11-09:31:58 LPDDR4X, 2112MHz channel[0] BW=16 Col=10 Bk=8 CS0 Row=18 CS1 Row=18 CS=2 Die BW=8 Size=8192MB channel[1] BW=16 Col=10 Bk=8 CS0 Row=18 CS1 Row=18 CS=2 Die BW=8 Size=8192MB channel[2] BW=16 Col=10 Bk=8 CS0 Row=18 CS1 Row=18 CS=2 Die BW=8 Size=8192MB channel[3] BW=16 Col=10 Bk=8 CS0 Row=18 CS1 Row=18 CS=2 Die BW=8 Size=8192MB Manufacturer ID:0xff CH0 RX Vref:28.5%, TX Vref:22.8%,21.8% CH1 RX Vref:27.1%, TX Vref:21.8%,21.8% CH2 R…

• 0

  Reputation Points

• 11 replies
• 3.4k views

Boardcon_yang

August 20Aug 20

Hey, maybe a stupid question, but how I can change the i2c clock rate in the armbianENV.txt? I have search around the forum and didn't find anything. can someone point me in right direction? Greets

• 0

  Reputation Points

• 2 replies
• 3.4k views

martinayotte

April 2, 20197 yr

Hi everyone and thank you in advance for your support! Long story short my system is in Read only mode after a reboot and I don't know what caused it. Some useful info before the reboot: I've been trying to install a RAID1 configuration so at certain point I did sudo update-initramfs -u I have manually updated and upgraded (only busybox was upgraded) with sudo apt update && sudo apt upgrade If you need any other info let me know! EDIT: I found out that I'm able to manually mount the root partition, but the problem persist after each reboot. I then added the follong to /boot/armbianEnv.txt extraargs=fsck.…

• 0

  Reputation Points

• 1 reply
• 3.4k views

Račka

August 17, 20242 yr

Hi, I am trying to make the RPI camera ( OV7750 ) to work with the TInkerboard in Armbian. But there is no module in /lib/modules for this camera. Is it already compiled in the kernel? Currently it doesn't work.

• 0

  Reputation Points

• 1 reply
• 3.4k views
• 1 follower

chwe

November 15, 20187 yr

HI all, first of all, I found thi sissue adopting a new board to the CSC tree, done by @balbes150. As it seems to be a problem of RK3288 in general, I post here, in case please move the topic to the approriate place. I have a JLD076 board, and started adjusting the DTS to the schematic. According to the schematic, and the TRM of RK3289, there is a maximum number of 160 GPIOs. This is also the number I get from my schematics. So I expected th get suitable number of pins from gpioinfo (bank:number 0:19, 1:4, 2:18, 3:28, 4:26, 5:12, 6:19, 7:24, 8:10). Instead, I get listed (0:24, 1...7:32, 8:16). I tried now to set ngpios for the &…

• 0

  Reputation Points

• 0 replies
• 3.4k views

mboehmer

October 5, 20206 yr

My first post here - I'm new to SBCs and stoked I got my home webserver up and running on a Orange Pi 5 which boots from an NVMe (pats-self-on-back : -) It runs great, pages are up, and it's all SO COOL, but it fails to do a restart... I can do a shutdown -h now, count to three and power it back up and all is well, but if I do a shutdown -r now it will go down, start back up, all the way to the login prompt but then barfs a long Oops message. God please... don't make me start over !

• 0

  Reputation Points

• 10 replies
• 3.4k views

xsetiadi

February 27Feb 27

Hi all! Rockchip64 20.05.4 kernel images are missing from the PPA. There is only 20.05.3 in https://apt.armbian.com/pool/main/l/linux-5.4.45-rockchip64/ and no https://apt.armbian.com/pool/main/l/linux-5.4.46-rockchip64/ I am looking for the header package in particular to build zfs. Can you make those packages available, please? Best regards, kryps

• 0

  Reputation Points

• 2 replies
• 3.4k views

kryps

June 28, 20206 yr

I've burned the latest Focal image onto Renegade board. Everything works fine except rebooting it via command. Once the reboot is entered, the console log showed it tried to reboot but stuck with the following info. The above Armbianmonitor is a zip file, please download it and save as zip file then unzip to get the detail log. I guess it was due to issue in dtb file but has no clue. Is there any genius can help on this? [ 97.418882] watchdog: watchdog0: watchdog did not stop! [ 97.672510] reboot: Restarting system INFO: PSCI Power Domain Map: INFO: Domain Nod State ON (0x0) INFO: Doma parent_node 0, State ON (0x0) e …

• 0

  Reputation Points

• 2 replies
• 3.4k views

Gorbovsky

March 9, 20233 yr

I followed the provided instructions to install Arbmbian on Orange Pi 5 Plus 16GB, so I downloaded the official Ubuntu image from the Orange Pi website, and when it booted, it sudo apt update sudo apt install mtd-utils sudo flash_eraseall /dev/mtd0 The flash operation was finished successfully. Then I turned off, loaded Armbian Ubuntu 24.04 (Noble) (Desktop images with Armbian Linux v6.12) on SD and started the machine. I have a monitor connected to the machine, but there is no output. My router doesn't show any new network device, so I suppose that Armbian doesn't load. It's exactly the same situation when I tried to install Armbian without /dev/mtd0 erasin…

• 0

  Reputation Points

• 0 replies
• 3.4k views

Igor V

December 10, 20241 yr

Hi, I installed "Armbian_20.02.7_Tinkerboard_buster_current_5.4.28_minimal" at my tinkerboard and, in order to enable uart 4, I had to rebuild the kernel onboard (from linux-source-current-rockchip_20.02.7_all.deb). The uart 4 came alive but the processor serial number now is missing from cpuinfo (printing 0000000000). How can I bring it up again?

• 0

  Reputation Points

• 0 replies
• 3.3k views
• 1 follower

santosmjc

April 28, 20206 yr

Hi guys We're trying to run SPI with Linuxcnc. But sometimes SPI latency with other hardware (FPGA) gets big. The operating system is armbian and I could install a real-time kernel on it so I know it shouldn't be real-time issue with kernel. We've noticed that it might be the spidev driver issue that is not real-time. And now we're gonna communicate with low-level SPI. Bit I dont know how? can any one please help me?

• 0

  Reputation Points

• 3 replies
• 3.3k views
• 1 follower

going

June 30, 20242 yr

I have a question or at last 2. 1.Where to connect outside diode to thinkerboard . 2.How to turn off/on it from command line.

• 0

  Reputation Points

• 4 replies
• 3.3k views

JMSKK

August 8, 20224 yr

Armbian 24.5.1. I don't have a serial console setup so I can't tell if it's actually starting to boot or not, but it never gets to the point where a video signal is sent to HDMI. It *does* send a CEC on signal to the TV, which does turn on, and power-cycling the Pi then begins a normal boot process. Pi also boots normally headless. Problem noted on one Insignia model and on a Vizio TV, works as expected on another Insignia model, on a Hisense and on an LG. Issue began after updating the kernel from legacy.

• 0

  Reputation Points

• 6 replies
• 3.3k views
• 1 follower

Alex D

August 14, 20242 yr

Hi Igor and all, back after a long absence, Have been using Cubie2s since 2015, rock solid with Armbian. I've now moved as cubies don't support gigabit, and the Pi gigabit interface is limited. So I now have a tinkerboard and popped Stretch mainline kernel 4.14.y onto an SDcard. Linux tinkerboard 4.14.67-rockchip #88 SMP PREEMPT Wed Aug 29 15:07:29 CEST 2018 armv7l GNU/Linux I want to compile the faithfull usb-redirector against the headers, but sudo apt-get install linux-headers-`uname -r` results in not found. Bit of noob question, but I've trawlled around, but can't seem to find source/headers or should I move to a diffrent version? Mark

• 1

  Reputation Points

• 2 replies
• 3.3k views

MarkA007

December 21, 20187 yr

Members, I have a question, because I can't find any documentation about what is broken or not. Why does /dev/rga not exist in my armbian install? I need it for my FFmpeg rkmpp config.

• 0

  Reputation Points

• 3 replies
• 3.3k views

lanefu

January 24, 20242 yr

On an orangepi 5 this image failed to post. Armbian_25.8.2_Orangepi5_noble_vendor_6.1.115.img.xz worked just fine via balena etcher and booting from a nvme.

• 1

  Reputation Points

• 8 replies
• 3.3k views
• 2 followers

OttawaHacker

November 10, 2025Nov 10

Hello, I have been experimenting with the bluetooth audio on my tinkerboard. The issue is both present on the last rockchip-next (4.1x I think) and the rockchip-current 5.8.18 kernel. I am using bluez and bluealsa. The problem is specific to the onboard bluetooth, using an external bluetooth dongle (a cheap and old CSR Bluetooth 3.0 dongle from China) works as expected, I can even send audio to multiple devices simultaneously (quality is very bad, but thats a bandwidth problem). As long as I just connect one bluetooth audio device everything is fine. I can have multiple paired, but disconnected, devices and as long as I connect and p…

• 0

  Reputation Points

• 1 reply
• 3.3k views

Werner

December 4, 20205 yr

I create a file 98-use-serial.rules under folder /etc/udev/rules.d . But symlink not created . My purpose is to fix USB port names, As COM1 COM2 COM3 This is the content of 98-usb-serial.rules: SUBSYSTEM=="tty",ATTRS{busnum}=="1",ATTRS{devnum}=="2",SYMLINK+="COM1" SUBSYSTEM=="tty",ATTRS{busnum}=="4",ATTRS{devnum}=="2",SYMLINK+="COM2" SUBSYSTEM=="tty",ATTRS{busnum}=="5",ATTRS{devnum}=="2",SYMLINK+="COM3" I used to fix the USB port on Asus Tinker S, Khada_VIM3 , all worked fine. I have no idea why Orange Pi 4 LTD not working.

• 0

  Reputation Points

• 3 replies
• 3.3k views

eselarm

July 31Jul 31

I am trying to play some dolby vision movies in Armbian (Orange pi 5) but the colours are not accurate. Do you know if it is possible to play DV movies and how? Thankd

• 0

  Reputation Points

• 2 replies
• 3.3k views

PajPaj

May 2, 20233 yr

hw ver 1.0 and 1.3, both dwmmc_rockchip ff500000.mmc:Unexpected interrupt latency. fw Offical Armbian 22.02.1 Bullseye. Power Supply 5.5V/3A + microUSB cable, currect Voltage over microUSB port is 5.1V when load 3A. TF card is Samsung EVO orange.

• 0

  Reputation Points

• 0 replies
• 3.3k views
• 1 follower

PP88PP

April 12, 20224 yr

I have a custom PCIe x4 lane card that I'm trying to integrate with a RockPro64 SBC. This custom card has been tested with many users on different platforms including a linux x86 system. When I try this card in a RK3399 system, I get a strange result when I view the assigned address space with the lspci command. It appears the address assigned is the exact value of the BAR address size for each BAR. If I change the BAR size the assigned address changes to that value. Below is a dmesg dump along with a lspci output for my device. Device is [ad00:001e]. Any guidance? dmesg: [ 2.395091] rockchip-pcie f8000000.pcie: host bridge /pcie@f8000000 ranges: [ …

• 0

  Reputation Points

• 2 replies
• 3.3k views

JHadd

January 28, 20242 yr

While exploring my Info Center, I stumbled across this screen: If there are other users who use a Samsung SSD 980 PRO 2TB, they may also be interested in following this link: https://www.pugetsystems.com/support/guides/critical-samsung-ssd-firmware-update/

• 0

  Reputation Points

• 4 replies
• 3.3k views

usual user

April 29, 20233 yr

Hi, my orange pi 5 plus cant boot armbian, its hang and screen goes flicker, im currently not been able to boot android images to (its hang and flicker to),, i cant boot armbian and android version.. but other linux is normally booting fine.. any advise?

• 0

  Reputation Points

• 2 replies
• 3.3k views
• 1 follower

Pocax Xacop

August 29, 20233 yr

Has anyone run a comparison benchmark of Armbian vs. the Orange pi versions of Debian and Ubuntu? ...Curious to see the results of optimizations.

• 1

  Reputation Points

• 1 reply
• 3.3k views
• 1 follower

wyim

March 3, 20233 yr

I have setup the hardware acceleration as explained in the posts, but within Kodi, every now and then I can see the image with "pixelising", and looking in the syslog when this just happened, I can read: Feb 15 16:54:17 orangepi5 kernel: [ 1267.908544] mpp_rkvdec2 fdc48100.rkvdec-core: reset done Feb 15 16:54:17 orangepi5 kernel: [ 1267.908549] mpp_rkvdec2 fdc38100.rkvdec-core: resetting... Feb 15 16:54:17 orangepi5 kernel: [ 1267.908670] mpp_rkvdec2 fdc38100.rkvdec-core: reset done Feb 15 16:54:17 orangepi5 kernel: [ 1268.316705] mpp_rkvdec2 fdc48100.rkvdec-core: resetting... Feb 15 16:54:17 orangepi5 kernel: [ 1268.316855] mpp_rkvdec2 fdc48100.rkvdec-core: …

• 0

  Reputation Points

• 1 reply
• 3.3k views

Tony3

February 16, 20233 yr

Hi, Greatings for the team. Currently i am using Armbian Bionic Desktop image with my rockpro64. I went through this link for GPU supported libs installation- I can see there are libMali.so files in /usr/lib/aarch... folder. I also installed armnn from this link- https://developer.arm.com/solutions/machine-learning-on-arm/developer-material/how-to-guides/configuring-the-arm-nn-sdk-build-environment-for-tensorflow-lite/build-arm-nn And successfully done and tested. But when i am running on of my tenseflowlite based project, it is throughing error- Loaded model mobilenet_ssd.tflite resolved reporter nn…

• 0

  Reputation Points

• 0 replies
• 3.3k views

Rahul

November 6, 20196 yr

Hello Kind Forum Experts, I ask for you help with following issue: Device: Nanopi-r4s 4GB Background: I'm happy with my device running from SD - but wanted to preemptively upgrade to eMMC based setup for improved reliability. I bought "original" FriendlyELEC SD-to-eMMC adapter + 64GB eMMC module. with normal microSD it boots great, with the sd-to-eMMC - nothing multiple attempts, tried both cloning my old SD & writing fresh image but both didn't help. eMMC type is 1.8V\3.3V HS400 speed, i think i need to address that in the .dtb file ? any help would be much appreciated Uri

• 0

  Reputation Points

• 0 replies
• 3.3k views
• 1 follower

UBS1

May 16, 20233 yr

Armbian Linux v6.1 - Ubuntu 24.04 (Noble) with XFCE seems not to support full bluetooth controller at boot stage, we need to manually load hci_uart module and and attach it to the serial interface. Is there any other service that is required to be enabled or any overlay that should be checked? After boot, we need to execute some commands to get the BT controller alive: user@bananapim7:~$ hcitool dev Devices: user@bananapim7:~$ sudo modprobe bluetooth user@bananapim7:~$ sudo modprobe hci_uart user@bananapim7:~$ sudo btattach -B /dev/ttyS6 -P bcm -S 115200 & [1] 3405 Attaching Primary controller to /dev/ttyS6 Switched line discipline fro…

• 0

  Reputation Points

• 5 replies
• 3.3k views
• 2 followers

SM2027

February 5Feb 5

Loading the latest dist with 5.10.160 kernel, the header package has wrong version...

• 0

  Reputation Points

• 2 replies
• 3.3k views

Gullik

July 4, 20233 yr

Hello Is it possible to install emby server in Orange Pi5? Thanks

• 0

  Reputation Points

• 4 replies
• 3.3k views
• 1 follower

Gypsophila .

July 27, 20242 yr

I installed Armbian on my R4SE downloaded from https://redirect.armbian.com/nanopi-r4s/Bookworm_current_minimal Everything seems to work just fine, but I am missing my second network interface. Only the WAN interface is shown. Is there a software fix I can apply, or should it be fixed in the OS image? armbianmonitor -u output: https://paste.armbian.com/gipilapuve

• 0

  Reputation Points

• 2 replies
• 3.3k views
• 1 follower

Junkman

November 25, 20232 yr

Hi I need help, I have used in the past the Banana PI M1 card for many years with a SATA Port Multiplier. To enable PMP support for this card, you had to edit: nano /boot/boot.cmd Go to line that starts with: setenv bootargs and add at the bottom of the row: ahci_sunxi.enable_pmp=1 recompile with: mkimage -C none -A arm -T script -d /boot/boot.cmd /boot/boot.scr Restart Almbian and the SATA Port Multiplier was activated. I now own a RockPro64 with Armbian and a 6-port PCIE sata card. Should buy a card with 8-10 ports to add hdd that I will need to make backups. …

• 0

  Reputation Points

• 1 reply
• 3.3k views
• 1 follower

DBSD

August 2, 20206 yr

Hello Currently my SixFab 4G hat is not working with the 4.4.x Kernel but with the latest 4.19.y Is there any chance that you port media script to the new Kernel build? Many Thanks Roman

• 0

  Reputation Points

• 2 replies
• 3.3k views

TonyMac32

March 1, 20197 yr

My new RockPi-E works well except for a reboot. Have to power it off/on to recover. Is it a known problem? Any solution/workaround? Thanks for your time Chris

• 0

  Reputation Points

• 1 reply
• 3.3k views

Werner

March 3, 20215 yr

A few days ago I had an issue with a successfully running Armbian installation running from the NVME of my Orange Pi 5 that suddenly developed an issue with nothing being shown on my TV. So after seemingly not being to identify the problem, I started again, wrote the image to an SD card and then moved the installation to the NVME drive using armbian-config utility. So now that I have a set-up that works again, I want to instigate a more belt and braces approach and create an image of the NVME installation using GZIP to compress the image file and decided to use the DD option from terminal. Having tried well over a hundred different comb…

• 0

  Reputation Points

• 3 replies
• 3.3k views
• 1 follower

laibsch

July 7, 20251 yr

I cannot get any CMA reserved space when I use latest LTS kernel (4.14): dmesg always says that no memory has been reserved for CMA. Is CMA working on mainline kernel for Mali Midgard? Is it required for 3D/video decoding stuff or the Mali kernel driver should instead allocate memory on-demand? I see that most of the kernel configuration options regarding CMA are disable or not set, which one requires to be enabled?

• 1

  Reputation Points

• 3 replies
• 3.3k views
• 1 follower

Myy

June 28, 20188 yr

Mar 9 12:31:24 renegade liblogging-stdlog: [origin software="rsyslogd" swVersion="8.24.0" x-pid="1209" x-info="http://www.rsyslog.com"] rsyslogd was HUPed Mar 9 12:31:28 renegade systemd[1]: Stopped Serial Getty on ttyS2. Mar 9 12:31:28 renegade systemd[1]: Started Serial Getty on ttyS2. Mar 9 12:31:38 renegade systemd[1]: Stopped Serial Getty on ttyS2. Mar 9 12:31:38 renegade systemd[1]: Started Serial Getty on ttyS2. Getting the bootloop serial getty message on my Libre Renegade OMV4. Logs enclosed. I tried some of the fixes I saw on other threads but to no avail. Those looked like they were for diff devices, but may be CPU specific? Any ide…

• 0

  Reputation Points

• 2 replies
• 3.3k views
• 2 followers

weehal

April 15, 20197 yr

I did a fresh install of armbian jammy 23.5 cli on my orangepi 5 (I previously used 22.11 and 23.02), and I cannot reboot. "sudo reboot" just hangs the system. Not really a big deal, just somewhat annoying, because previous versions runs fine. Anybody else experiencing the same problem? "armbianmonitor -U" output is attached. armbianu.txt

• 0

  Reputation Points

• 4 replies
• 3.3k views
• 1 follower

conky

June 16, 20233 yr