Rockchip

Hi! I installed this image on my Khadas Edge 2 Armbian 24.5.5 Noble Gnome MESA / VPU I am wondering if it is possible to use Wacom tablet. I have seen Ubuntu builds from Khadas support it. Another question is about 1440p monitor using hdmi port on Edge 2, newer Ubuntu development builds seem to have this option, what about Amrbian?

• 1

  Reputation Points

• 9 replies
• 4.6k views

Efe Çetin

September 2, 20242 yr

I am interested in hardware video support and wether ffmpeg has hardware support on the RK3588 and Mali G610MC4 GPU. And was wondering if someone whould be interested in giving me the output of a few tests for me please ? ``` ffmpeg -hide_banner -encoders ``` ``` ffmpeg -hide_banner -decoders ``` ``` ffmpeg -hide_banner -hwaccels ``` Many thanks in advance.

• 0

  Reputation Points

• 2 replies
• 4.3k views

AaronNGray

August 30, 20242 yr

Hi, I put the image on an SD card, but the machine fails to boot. Looking at the serial console, it just sits in a loop with the CPU constantly resetting after an exception. Serial console log is attached. Regards, Dianne. bootloop.txt

• 1

  Reputation Points

• 32 replies
• 14.1k views
• 1 follower

Hardware_hermit

August 28, 20242 yr

Does the khadas EDGE2 ARMBIAN system support Mali GPU by default?

• 0

  Reputation Points

• 2 replies
• 2.2k views

lay

August 28, 20242 yr

Hello, Long time Gentoo and Raspberry Pi user, but I am interested in a more powerful Arm device. Will buy an Orange Pi 5 plus device if it meets my requirements. I am interested about dual or multiple boot: let's say Linux and Android or, at least multiple Linux distro - let's say Armbian and Gentoo. It is possible ? On Raspberry Pi 4 with a larger boot partition I switch content of /boot from boot/debian /boot/gentoo, have multiple partition on SATA SSD connected via USB edit root parameter in /boot/cmdline.txt and that way I choose which distro to boot. On Orange PI 5 (Plus) I read that SPI chip have to be flashed to choose the boot device fro…

• 0

  Reputation Points

• 6 replies
• 15.7k views
• 1 follower

ozacas

August 25, 20242 yr

Updated: The Armbian vendor kernel version now includes Panthor, and will soon be able to run it as well. Waydroid images: https://github.com/WillzenZou/armbian_fork_build/releases/download/willzen-armbian-24.5.0/2.waydroid-panthorv10-240416-v1.img.tar.gz Note: Waydroid needs to be run in the Wayland desktop environment. (Such as Gnome wayland, KDE wayland session) What's work: OpenGL ES is ok, I have tested some game: Mincecrat, gameSHINE, Monument Valley 2 What's not work: Vulkan. Video hardware decode and encode. How to use Waydroid 1. To install Waydroid,…

• 0

  Reputation Points

• 4 replies
• 17.5k views
• 2 followers

DarkevilPT

August 22, 20242 yr

May I know how do you enable Panrost support Ubuntu 24.04 on Khadas Edge2? By Khadas SDK, I have built image which failed with followings: 1. Enabled Panfrost in defconfig. 2. Add kisak-mesa ppa, apt update and upgrade. 3. Replace mali_csffw.bin by Armbian mali firmware. After these, the gnome-settings shows the GPU is software vendoring. Hope to get your help~ Thanks!

• 0

  Reputation Points

• 0 replies
• 2.1k views
• 1 follower

Jacob Zang

August 22, 20242 yr

Hi, I have a MIPI screen to replace. I have configured DTS in the kernel, but it doesn't light up and the backlight doesn't respond. May I ask： Uboot needs to initialize and light up the screen, but there is no screen configuration in the built-in DTS of Uboot. How can I adjust the screen related configuration in DTS?？ help help.....

• 0

  Reputation Points

• 0 replies
• 1.5k views

lay

August 20, 20242 yr

Hello, I have purchased the khadas edge2 board and am currently studying, May I ask where the system is configured in the framework to display prompt word identifiers after login？？？？ help help........

• 0

  Reputation Points

• 2 replies
• 1.7k views
• 1 follower

lay

August 20, 20242 yr

Hello! I had an issue upgrading my khadas edge2 to the linux-image-edge-rockchip-rk3588 package (24.8.0-trunk.597) on the edge/rolling release image I had installed. It looks like issues with building the initramfs files, specifically trying to symlink on top of a file that already exists and/or copying the /bin/osk-sdl binary. The following seems to have allowed me to use apt install -f to get the kernel and initramfs files to be built and installed successfully. Probably the change in the symlink code was unnecessary, but I did both and got a bootable system out of it, so it's a bit late for me to test. I made the following changes to /usr/share/…

• 0

  Reputation Points

• 0 replies
• 2k views

UnlikelyLass

August 18, 20242 yr

Hi, How can i get the Rknpu working in Armbian for latest builds. I am unable to find how to make this work. Thanks in Anticipation

• 0

  Reputation Points

• 0 replies
• 2.1k views
• 1 follower

Rajiv Singh

August 18, 20242 yr

for some strange reason the content of armbianEnv.txt (rootdev) is not applied in my opi5, if anyone can help me. Thank !!!

• 0

  Reputation Points

• 2 replies
• 3k views
• 1 follower

ozacas

August 18, 20242 yr

Hi everyone and thank you in advance for your support! Long story short my system is in Read only mode after a reboot and I don't know what caused it. Some useful info before the reboot: I've been trying to install a RAID1 configuration so at certain point I did sudo update-initramfs -u I have manually updated and upgraded (only busybox was upgraded) with sudo apt update && sudo apt upgrade If you need any other info let me know! EDIT: I found out that I'm able to manually mount the root partition, but the problem persist after each reboot. I then added the follong to /boot/armbianEnv.txt extraargs=fsck.…

• 0

  Reputation Points

• 1 reply
• 3.4k views

Račka

August 17, 20242 yr

rockpro64 board can't boot up if usb hdd is attached, if I pull out the usb it boot up correctly (Armbianmonitor log attached). With previous firmware (6.6.36) works correctly. Please help.

• 0

  Reputation Points

• 0 replies
• 5.6k views

cyrixproc

August 16, 20242 yr

Armbian 24.5.1. I don't have a serial console setup so I can't tell if it's actually starting to boot or not, but it never gets to the point where a video signal is sent to HDMI. It *does* send a CEC on signal to the TV, which does turn on, and power-cycling the Pi then begins a normal boot process. Pi also boots normally headless. Problem noted on one Insignia model and on a Vizio TV, works as expected on another Insignia model, on a Hisense and on an LG. Issue began after updating the kernel from legacy.

• 0

  Reputation Points

• 6 replies
• 3.3k views
• 1 follower

Alex D

August 14, 20242 yr

The path '${kernelw_ork-dir}' actually exists, but why does it appear 'Cannon stat: No such file or directory' during compilation??? What are the configurations? For the convenience of personal development, I forced the use of my kernel source code git address. Please support me, thank you！！！

• 0

  Reputation Points

• 3 replies
• 2.3k views

lay

August 14, 20242 yr

The ap6275p WiFi hotspot fails to open. The ap6275p itself supports the ap mode. image：Armbian_24.5.5_Bananapim7_bookworm_vendor_6.1.75_cinnamon_desktop.img sudo create_ap -m nat wlan0 enP2p33s0 armsom armsom-jack --no-virt --freq-band 5 Failed to get phy interface ERROR: Your adapter does not support AP (master) mode We used joshua-Riek/ubuntu-rockchip's ubuntu system which supports ap and has been connected normally

• 0

  Reputation Points

• 3 replies
• 2.8k views

armsom-jackson

August 13, 20242 yr

Hi, Like the topic says, both NICs are underperforming, they are connected to a Gb switch which I use and benched with other machines, neither iperf nor iperf3 (threaded and not threaded) go higher than 700Mbps. Another server plugged on the same switch reaches Gb steadily. I applied CPU affinity so both IRQ's are handled by the A76 cores but it makes no difference. OS: Armbian 24.5.5 Bookworm, uname -a: Linux geonosis 6.1.75-vendor-rk35xx #1 SMP Fri Jul 19 14:49:03 UTC 2024 aarch64 GNU/Linux There's not much running on the board for now.

• 0

  Reputation Points

• 1 reply
• 1.8k views
• 1 follower

iMil

August 12, 20242 yr

Dear members, I was looking for a Noble Gnome-based image for NanoPi R4S, and only found one that is trunk-based, and had BIG RED letters stamped on it: DO NOT USE FOR PRODUCTION. Is there anything coming in that regard? Will we have a proper Noble Gnome-based release for NanoPi R4S? Thanks!

• 0

  Reputation Points

• 2 replies
• 3.7k views
• 1 follower

Janos Szigetvari

August 11, 20242 yr

Report the following error： Reversioning package [ re-version 'armbian-bsp-desktop-quartz64b-edge(deb)::1-B8091-R448a' to '24.8.0-trunk' ] [🔨] removed '/home/john/Armbian/development_armbian/build/output/packages-hashed/extra/jammy-desktop/armbian-bsp-desktop-quartz64b-edge_1-B8091-R448a_arm64.deb' [🌿] Building image [ quartz64b ] [🌱] Checking for rootfs cache [ edge quartz64b jammy desktop_tools internet gnome no ] [🌱] artifact [ rootfs :: rootfs() ] [🌱] rootfs version [ packages_hash: '50761c13748d-H01ba47-B4cac74' cache_type: 'gnome-desktop' rootfs_cache_id: '50761c13748d-H01ba47-B4cac74' ] [🌱] Getting ORAS manifest [ ORAS manifest from ghcr.io/armbi…

• 0

  Reputation Points

• 5 replies
• 2.6k views

Werner

August 10, 20242 yr

hello guys, i ve been lately working with nanopi-r5s which comes with a default openwrt os installed on EMMC. but i prefer working on the armbian images. that is why i installed debian 12 bookworm from https://www.armbian.com/nanopi-r5s/ anyway, r5s refuses to boot from sd card for no matter what. until i corrupted the emmc by mistake(i started flashing a default image to emmc but then took the power off before it is done). so now it boots from sd card. but now when m trying to install the image from sd card to emmc through armbian-install. it only shows option 5 and 6. as if it can not detect the emmc. so what m trying to figure o…

• 1

  Reputation Points

• 17 replies
• 15.1k views

sami

August 8, 20242 yr

Hi all, Just want to share this issue i came across from my recently purchased OPI5+ 32GB version. I noticed it freezes when transferring .img from micro SD card to eMMC or NVMe drives via the command line. Now the img file are armbian OS and no its not the img file issue. at times I can get it to around 70seconds and it will freeze. hard reboot is required, unable to complete the transfer. I have also tried to reduce the bs=10 speed but still the same. Now i have also got the 16GB version and this works fine with no issues... Good chance there is something wrong with this latest hardware..…

• 1

  Reputation Points

• 61 replies
• 29.9k views
• 5 followers

rosbeef

August 8, 20242 yr

I tested some stable armbian images. I want to use the Rock 5C as server, so no desktop is needed. Ubuntu is prefered. First I flashed `Armbian_24.5.1_Rock-5c_noble_vendor_6.1.43.img.xz` wich doesn't work. Log from first boot is attached at the bottom. Second I flashed `Armbian_24.5.1_Rock-5c_noble_edge_6.8.10.img.xz` wich is working well. SSH comes up as usual. Would be nice to use the vendor kernel (6.1.43) instead of the bleeding edge (6.8.10) one, because it is not reccommend and not all features are working. I OCR a screenshot from first boot with `Armbian_24.5.1_Rock-5c_noble_vendor_6.1.43.img.xz` Welcome to Armbian 24.5.1 noble!…

• 1

  Reputation Points

• 9 replies
• 6.1k views
• 3 followers

Dual-O

August 7, 20242 yr

hai, im planning to upgrade my local media server to use an external hard drive attached using hard drive docking on USB 3.0 what I'm confused about is. what is the best FileSystem format for my hard drive? I'm not planning to unmount and use the hard drive to another PC (for example: windows PC) So I'm ready to format it with FileSystem that fully optimizes on Linux (I'm using armbian noble) so ext4 or xfs? I hear xfs is better for copying large file sizes. my casual use is downloading movies, and watching it on jellyfin. or maybe I'm just using ext4?

• 0

  Reputation Points

• 1 reply
• 3.2k views
• 1 follower

Marco Schirrmeister

August 6, 20242 yr

After upgrading to kernel 6.10.1-edge-rockchip-rk3588 I started getting: fdee0000.hdmi_receiver: hdmirx_wait_lock_and_get_timing: HDMI pull out, return on the console. This repeats constantly and quite rapidly, and just doesn't stop. I can silence it by plugging a monitor into HDMI port, but... I prefer to run my board headless (serial + net). Does anybody know any other way to get rid of this? This "feature" was absent with the -rc7 kernel.

• 1

  Reputation Points

• 2 replies
• 3.9k views

Marco Schirrmeister

August 6, 20242 yr

I bought a wifi dongle (for 3 pounds on ebay!) having a realtek chip 8821cu. There were some disconnects from time to time, and I was unable to find out why from the logs. Few days ago I installed and recompiled the realtek drivers from https://github.com/lwfinger/rtw88, got some new modules, replaced the modules in the directory /lib/modules/6.1.43-vendor-rk35xx/kernel/drivers/net/wireless/realtek/rtw88 Since then, I have no more disconnect. This may helps someone maybe.

• 0

  Reputation Points

• 0 replies
• 2.5k views

Tony3

August 4, 20242 yr

Hello, After successfully installed and booted Armbian 23.02.2 Jammy from SD card on Odroid M1, I ran armbian-install script with using option "boot from SD, system on SSD" to move system to SSD. The process finished successfully, see the logs from armbianmonitor (taken before reboot): https://paste.armbian.com/folivedane After reboot, system failed to boot automatically from SSD due to error: [ 13.766854] 8644d43f-c78d-4586-ab61-14dfa2e740ea: Can't open blockdev [ 13.774855] systemd[1]: Starting Rule-based Manager for Device Events and Files... [ 13.781860] systemd[1]: media-mmcboot.mount: Mount process exited, code=exited, status=…

• 1

  Reputation Points

• 5 replies
• 6.2k views

vovo500

July 31, 20242 yr

In fact all versions since kernel 5.10.?? are broken and stop at u-boot. Better the Uboot shall dive down and never ever come up to bother us. Finally I managed to install bullseye by using a buster image, deactivtion kernel upgrade and removed the armbian.list from /etc/apt/ Then I changed source list from buster to bullseye apt update apt upgrade -y apt full-upgrade -y thats it. And i is really a shame to fool the community by uploading untested software.

• 1

  Reputation Points

• 19 replies
• 9.4k views
• 1 follower

TRS-80

July 27, 20242 yr

I bought a Pinebook Pro two weeks ago. It came with Manjaro KDE preinstalled on EMMC. I wanted to try out Armbian, so I downloaded the Bookworm XFCE image from May 27th. In order to get the SD booted, I first flashed Tow-Boot for Pinebook Pro (pine64-pinebookPro-2021.10-005.tar.xz) from github Tow-Boot to the SPI. Then during boot after pressing ESC the menu lets you select the SD card for boot. The first boot to Armbian worked well. I could set up user, timezone and everything. The XFCE desktop looks very clean with a reasonable selection of software. Well done, team! But after I upgrade the system with apt update & upgrade, the next time the machine is b…

• 0

  Reputation Points

• 3 replies
• 4.2k views
• 1 follower

TRS-80

July 27, 20242 yr

I slowly convinced myself that I wanted a PineBook Pro, some time after the first production run. But then COVID, parts shortages, etc. happened and they were not available again until about mid-2022. But when they were, I decided to snap one up. And since then I have not been able to get it to boot Armbian. It came from the factory with Manjaro, which for me being a Debian guy, might as well be useless. So the PBP sat around collecting dust. Since then I have tried a few times to get it to work. I read many forum posts, tried some things. I won't document all that in detail. In this post, I will continue from where I left off her…

• 1

  Reputation Points

• 7 replies
• 10.4k views
• 2 followers

TRS-80

July 27, 20242 yr

Hello Is it possible to install emby server in Orange Pi5? Thanks

• 0

  Reputation Points

• 4 replies
• 3.3k views
• 1 follower

Gypsophila .

July 27, 20242 yr

I upgraded my 5.10 install to 6.1 kernel got everything working including wifi using armbian-config - change kernel but after I noticed that video acceleration was broken with vlc I decided to rollback. The initial rollback somehow failed, after some tweaking, I've been able to boot the system again and run kernel 5.1 but now I don't have my ap6275 working anymore and the video acceleration modules from 5.x seem to be gone. I have the overlay for the ap6275 but it is not loading any module. What am I missing?

• 0

  Reputation Points

• 2 replies
• 2.9k views
• 1 follower

ioncube

July 25, 20242 yr

HI!! I need help. What is the correct way to install armbian? I have an odroid m1, with a nvme 2 TB. I installed armbian and also stored my files on the same disk. The problem is that one day I updated the system and also updated the kernel. This caused the system no longer boot. I tried to fix the file system but it is still corrupt. The problem is that the nvme where I have all my files is not accessible and therefore I cannot copy them to another drive. When I mount the nvme drive (with external case) on my laptop with Ubuntu, the files do not appear. Therefore, I would like to know if where is the best option to install armbian and and mantaining safe mu files. In th…

• 0

  Reputation Points

• 0 replies
• 2.1k views
• 1 follower

Fernando Castillo

July 24, 20242 yr

Ubuntu Noble had some early day issues with default key ring not being stored properly and or synced to the logged in user and users getting popup prompts about the default keyring locked. A week ago I downloaded Armbian Noble 25.5.2 desktop onto my OPi5. It has been my daily driver for the past week or so. It has been a really nice release for my OPi5. All has been good except the default keyring popups. I have created new users, deleted stored keyrings, changed passwords among other things. At this point I am able to store the default keyring password (which is the same as my login PW). However, when launching chromium, and ProtonVP…

• 0

  Reputation Points

• 2 replies
• 2.4k views

SteeMan

July 24, 20242 yr

Hi, I read everything I could possibly find on the DP-Alt mode for the RockPro64 and came to the conclusion that no Distro is offering that right now. However, the Pinebook Pro seems to have support via a Kernel Patch. Can the Pinebook Pro Kernel be installed on the RockPro64? Is there a repository for Armbian Kernels? Thanks very much.

• 1

  Reputation Points

• 14 replies
• 6.4k views
• 2 followers

going

July 21, 20242 yr

Hi there, I've been trying to enable g_ether and USB OTG on my Orange PI 5+. I've tried things like editing /boot/orangepiEnv.txt and adding module-load dwc2,g_ether. However, I don't get any usb0 interface pop up which indicates to me that the USB/OTG mode is not set to peripheral on the settings. I'm not sure how to go about it? Would anyone be able to advise? I want to use the power port for also Ethernet.

• 0

  Reputation Points

• 4 replies
• 5.6k views

Werner

July 17, 20242 yr

On Tinkerboard S, I installed Armbian 24.5.1 Noble XFCE to mmc and tried again with an SD card after having trouble. The desktop does not respond to 2 different keyboards I have tried. If I use a mouse to open Terminal, the keyboards do work in the Terminal. If I try to open Web Browser in the applications menu, I get a window saying "Failed to execute Web Browser. Input/output error." apt update and apt upgrade do not fix the problem. Here is a log: https://paste.armbian.com/onikesixam

• 0

  Reputation Points

• 3 replies
• 5.1k views

Igor

July 16, 20242 yr

RTL8852BE is the official recommended Wifi module for Orange Pie 5 PLUS, but it is not available in Armbian 24.5.1 Linux Vendor Kernel 6.1 without a driver module. Hope the official driver will be added to the 6.1 kernel. Thanks.

• 1

  Reputation Points

• 13 replies
• 16.5k views
• 2 followers

bolet75

July 15, 20242 yr

I'm trying to use a TP-Link tl-wn722n with AR9271 chipset, but it only shows up in lsusb: Spoiler orange:~:% lsusb Bus 006 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 005 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 008 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 007 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 002: ID 0cf3:9271 Qualcomm Atheros Communications AR9271 802.11n Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation…

• 1

  Reputation Points

• 3 replies
• 3.3k views
• 1 follower

Netnax

July 10, 20242 yr

Dear All, I have a USB wifi device that has always been working fine at boot with linux 5.1, now I upgraded to 6.1 gnome/vendor and I got a strange behavior on my OPI 5: - If I have wifi device plugged and power on the PI5, the USB device is not seen (no trace of it with lsusb). - If I have wifi device plugged and power on the PI5, the USB device is not seen (no trace of it with lsusb). But, with the PI 5 still running, If I unplug it and re-plug it, it is recognized and works fine. Also after that, if I issue a sudo reboot, the wifi device will be seen and work properly. (it does not matter what usb port I use white, or blue, same b…

• 0

  Reputation Points

• 3 replies
• 3.7k views

Tony3

July 10, 20242 yr

hello guys, i recently observed a weird behavior with my nanopi R4s(jammy os). when the power goes OFF then ON in like 5 seconds duration then the nanopi does not boot up at all! i need to remove the adapter for like 15 seconds so it would be able to boot again! is this normal?

• 1

  Reputation Points

• 4 replies
• 5.2k views

Junkman

July 10, 20242 yr

Hello Is it possible to install Emby Server in Orange Pi5 plus? Regards Hugo

• 0

  Reputation Points

• 1 reply
• 2k views

Werner

July 8, 20242 yr

Hello everybody. I own a Orange Pi 5 Plus with Debian and 3 partitions: boot, root and storage (fat, ext4, ext4). Now I want to try Armbian but I don't want to overwrite the storage partition, so I shoudn't use dd to write the .img file. Ant tip to solve this situation? Thanks.

• 0

  Reputation Points

• 4 replies
• 3.4k views
• 1 follower

Jose Francisco

July 5, 20242 yr

I searched & tried all materials I can find, trying to set up FFmpeg to work with hardware acceleration on Orange Pi 5. But it did NOT work. Anyone else succeeds in using GPU hardware acceleration to encode/transcode video on Orange Pi 5 using FFmpeg? (or using gstreamer?) Could you please share with me the way to do it? Thank you very much indeed!

• 1

  Reputation Points

• 13 replies
• 47.9k views
• 1 follower

jyce

July 3, 20242 yr

I am using Orange Pi 5 Plus with eMMC. I tried to install a program I need, but an error occurred saying that installation was not possible because SecureBoot was disabled on the system. So I need to enable SecureBoot, how do I do that? Thank you.

• 0

  Reputation Points

• 1 reply
• 3.8k views

Werner

July 2, 20242 yr

Hi guys We're trying to run SPI with Linuxcnc. But sometimes SPI latency with other hardware (FPGA) gets big. The operating system is armbian and I could install a real-time kernel on it so I know it shouldn't be real-time issue with kernel. We've noticed that it might be the spidev driver issue that is not real-time. And now we're gonna communicate with low-level SPI. Bit I dont know how? can any one please help me?

• 0

  Reputation Points

• 3 replies
• 3.3k views
• 1 follower

going

June 30, 20242 yr

I'm using the ps2 emulator and when I try to run a game I get an error message "OpenGL is not supported. Only OpenGL 3.0 was found" I'm using the version "Armbian 23.02 Jammy Gnome"

• 0

  Reputation Points

• 4 replies
• 7.8k views
• 1 follower

Hqnicolas

June 29, 20242 yr

After upgrading to kernel 6.8, I've noticed my orange pi 5 running a bit hotter than when using kernel 5.10, even with the CPU load a little bit lower than before. Nothing alarming, just an observation. Did anyone else notice the same behaviour?

• 0

  Reputation Points

• 0 replies
• 1.7k views

Tiago Esperança Triques

June 27, 20242 yr

Dear Armbian Community, I hope this message finds you well. I am encountering an issue with PWM on my Orange PI 5 Plus running Armbian. Despite my attempts, I am unable to utilize PWM via GPIO pins. Upon navigating to /sys/class/pwm, I can only see the pin designated for controlling the fan. The PWM pins on the GPIO are not visible. I have successfully controlled GPIO pins using WiringPi and Go Lang Periph libraries; however, when attempting to use PWM via GPIO, I encounter the following error: I have also checked the “hardware setup” screen in armbian-config, where I can see two hardware components listed, but PWMs are not among them. …

• 0

  Reputation Points

• 2 replies
• 3.8k views

Kemal

June 27, 20242 yr

When connected to some PC monitors, the image is larger than the physical screen: about 20 pixels at the top and bottom sides, and 50 pixels at the right and left sides are missing. This happens as soon as the board boots (without logo), the start of lines are truncated, and this also happens on text ttys (Ctrl + Alt + F1..6). I guess it's about a boot env variable, but I could not find it.

• 0

  Reputation Points

• 7 replies
• 4.7k views

bolet75

June 24, 20242 yr

Hello, After several days of debug I put the finger on a very strange issue using integrated Ethernet. I use my Rockpro64 mostly as a Samba and DNS server. In my network context I implement 2 vlans as vlan interfaces (eth0.10 and eth0.20). Each of these interfaces needs to use a specific mac address that differs from physical eth0 mac address (it is an important point). If I use only the physical mac my router is not be able to route correctly between vlans (probably an ivl/svl issue). Under this context I first noticed that when I bring down eth0.20 although using vlan 10 (so eth0.10) connectivity is lost. I then wr…

• 0

  Reputation Points

• 0 replies
• 2.1k views
• 1 follower

arnaudf

June 21, 20242 yr

I purchased this board to use as a gaming station and, among the options, I'm using moonlight with sunshine to stream my steam to the room, which is working wonderfully well, but I'm having a problem. When pairing the control with Armbian, it is recognized as a joystick but I cannot use it in any way. I have two Sony Dualsense joysticks, I tested them both with cable and Bluetooth and the problem is the same. Can anyone guide me where I can start to debug the problem? NOTE: I borrowed an IPEGA joystick and it worked normally. [ 1107.997887] playstation 0005:054C:0CE6.0007: unknown main item tag 0x0 [ 1107.998309] playstation 0005:054C:0CE6.0007: hidra…

• 0

  Reputation Points

• 3 replies
• 4.9k views
• 2 followers

sunarowicz

June 20, 20242 yr

what is new? download (temporally) final versions https://www.armbian.com/khadas-edge-2/

• 0

  Reputation Points

• 2 replies
• 2.7k views
• 1 follower

Igor

June 18, 20242 yr

Banana Pi BPI-M7 with Rockchip RK3588, 8/16/32G,RAM 64/128G eMMC,wifi6 support . 2x2.5G port ,1xHDMIout ,2x USB3.0,2xTYPE-C,2x MIPI CSI interface and 1x MIPI DSI interface, 1x M.2 KEY M interface,40 PIN GPIO ,Mini size just 92x62mm. Hardware interface: online documents: https://docs.banana-pi.org/en/BPI-M7/BananaPi_BPI-M7

• 0

  Reputation Points

• 1 reply
• 3.1k views
• 1 follower

Lion Wang

June 18, 20242 yr

Hello everyone I was trying to look for information in the forum but I can't find any topic where this specific issue is discussed. I also looked for help in the omv forum and they told me it was a problem with the distribution, hopefully you can help me. My system running Armbian_24.5.1_Orangepi5-plus_bookworm_vendor_6.1.43_minimal Install OMV, omv extras, i try to configure the compose folders and i get the 500 internal server error, clear cache, update and reboot system but there is no change, a moderator asked me for the log by executing the following command "Your error output is incomplete. What is the output of: sudo omv-salt …

• 0

  Reputation Points

• 1 reply
• 5.7k views
• 1 follower

Manuel Carvajal

June 18, 20242 yr

I must be doing something stupid. After having switched the branch "Multimedia" as M, no module are generated at all and I end up with error like: 🔨] ERROR: modpost: "dma_contiguous_default_area" [drivers/media/common/videobuf2/videobuf2-cma-sg.ko] undefined! [🔨] ERROR: modpost: "cma_release" [drivers/media/common/videobuf2/videobuf2-cma-sg.ko] undefined! [🔨] ERROR: modpost: "cma_alloc" [drivers/media/common/videobuf2/videobuf2-cma-sg.ko] undefined! Reading documentation to buld armbian, it only mention docker. I have been (last year) generating kernel on the machine itself (the orange pi 5 plus), this is not supported? thanks.

• 1

  Reputation Points

• 21 replies
• 12k views
• 2 followers

Tony3

June 17, 20242 yr

Hello, I am trying to create a custom uboot using armbian. it's possible? I am using the following command but I cannot generate the "uboot.bin" to save it to the spi: ./compile.sh uboot-config BOARD=orangepi5 BRANCH=current BUILD_DESKTOP=no BUILD_MINIMAL=yes BUILD_ONLY=u-boot CONFIGURATION=stable KERNEL_CONFIGURE=no KERNEL_ONLY=no PROGRESS_DISPLAY=plain RELEASE=bookworm UBOOT_ONLY=yes Thank.

• 0

  Reputation Points

• 1 reply
• 3.1k views
• 1 follower

Werner

June 17, 20242 yr

Hello friends, htop does not show me the temperature, I am attaching information about my system (I have the libsensors library installed). If someone can help me please. Thank you. OS: Armbian 24.5.0-trunk.89 trixie aarch64 Host: Xunlong Orange Pi 5 Kernel: 6.8.0-rc1-edge-rockchip-rk3588 Uptime: 1 hour, 14 mins Packages: 333 (dpkg) Shell: bash 5.2.21 Terminal: /dev/pts/0 CPU: (8) @ 1.800GHz Memory: 187MiB / 7687MiB

• 0

  Reputation Points

• 3 replies
• 4.2k views
• 1 follower

JamesCL

June 17, 20242 yr

Hi all I hava an orange pi 5 plus with a 512GO NVME SSD. I have installed the latest version od Armbian to a SD card it work well, but for speed reason i would like to install the OS to th SSD drive and boot from this device and no longer from the SD card. Is there a way to do this ? i mean from u-boot point of view? i can keep a SD card inside it to store u boot but i would like to move usr var and such to SSD Thanks in advance for your answers comment or ideas W.

• 0

  Reputation Points

• 3 replies
• 4.9k views
• 1 follower

William Bonnet

June 13, 20242 yr

We have tried to connect the MIPI DSI 10.1 inch OPI Display. It is working fine alone but when we tried to connect another display with the HDMI. we expect it to work as our 2nd display but it did'nt work unless i disable the MIPI display from the OPI Config.

• 1

  Reputation Points

• 1 reply
• 2.3k views

ArmBoy1988

June 10, 20242 yr

I finally got wifi working on a fresh install of 24.5.1. Video acceleration is working perfectly in Chromium but I am not having any luck playing h264 mp4 videos with hardware acceleration in vlc or mpv. Is this possible or am I missing something? CPU is around ~30% with chromium playing 4k youtube but if I play one of my mp4 files it's a solid 130%

• 0

  Reputation Points

• 1 reply
• 2.6k views
• 1 follower

Sr_-Caio

June 9, 20242 yr

Hi, I've installed Armbian_24.5.1_Rock-5b_bookworm_vendor_6.1.43_cinnamon_desktop.img on my Rock 5b and when I have tried to do apt update get error message with armbian.com url. (timeout error) I did all necessary and now it work fine. But for dev info, there is some problem probably with all Stable images.

• 0

  Reputation Points

• 3 replies
• 3.1k views
• 1 follower

Werner

June 6, 20242 yr

Hi, I have tried Rock 5b images with Kernel 6.8.10. Any of image I've tested will not start. No LED flashing, no HDMI signal.. nothing. The others with Kernel 6.1.43 starts fine.

• 0

  Reputation Points

• 3 replies
• 3.9k views
• 1 follower

Igor

June 5, 20242 yr

I installed latest vendor image and because of the wifi issues I switched to the edge kernel. I messed up my fstab, couldn't connect with ssh, so I plugged it to my monitor and a keyboard, but there was no video. Eventually, I fixed it by booting vendor image from my sd card, but I got curious. I know, that vendor image just works, so I flashed edge image to my sd card to see what's wrong. The monitor recognizes the presence of the board, but it's just a black screen. I can ssh to the board, so the image definitely booted, but there's just no video. Here's the log from my original installation. I kept 6.8 kernel because the video is not important to me.

• 0

  Reputation Points

• 7 replies
• 5.5k views
• 1 follower

VaRusLAN

June 5, 20242 yr

After looking at this message from @Seb042 I thought it would be better to open a new topic to discuss this. From what I saw from my install: $ dmesg ... [ 6.166453] iwlwifi 0002:21:00.0: api flags index 2 larger than supported by driver [ 6.166480] iwlwifi 0002:21:00.0: TLV_FW_FSEQ_VERSION: FSEQ Version: 93.8.63.28 [ 6.167021] iwlwifi 0002:21:00.0: loaded firmware version 59.601f3a66.0 ty-a0-gf-a0-59.ucode op_mode iwlmvm [ 6.267334] iwlwifi 0002:21:00.0: Detected Intel(R) Wi-Fi 6 AX210 160MHz, REV=0x420 [ 6.273748] iwlwifi 0002:21:00.0: reporting RF_KILL (radio disabled) [ 6.450150] iwlwifi 0002:21:00.0: WFPM_UMAC_PD_NOTIFIC…

• 1

  Reputation Points

• 7 replies
• 5.5k views
• 1 follower

ricardo_brz

May 31, 20242 yr

I lost whole day yesterday to try boot with new images from Armbian download page - kernel 6.1 / kernel 6.8 bookworm/trixi and none boots... If I take Ubuntu or Debian image I have no problem to boot from. Do you have the same?

• 1

  Reputation Points

• 12 replies
• 5.4k views

Werner

May 31, 20242 yr

Hi I installed a nvme SSD to my rockpro64 (with a generic PCIe adapter card). Somehow it only uses a x1 link instead of x4. I also observed the same behaviour with a x2 SATA card (only x1 link established). Output of lspci: LnkSta: Speed 2.5GT/s (downgraded), Width x1 (downgraded) To rule out hardware issues, I also tried the same setup with Manjaro-ARM which correctly negotiates a x4 link. LnkSta: Speed 2.5GT/s (downgraded), Width x4 dmesg for Armbian [ 2.221206] rockchip-pcie f8000000.pcie: host bridge /pcie@f8000000 ranges: [ 2.221296] rockchip-pcie f8000000.pcie: MEM 0x00fa000000..0x00fbdfffff -> 0x00…

• 0

  Reputation Points

• 4 replies
• 4.6k views

Nino

May 30, 20242 yr

I tried both the 6.8.10 and 6.1.43 releases from CI pipeline and none of these has the ap6275p wifi option in the armbian-config tool. There was a previous post that mentioned that the module got merged for the new kernels but is there an ETA to have this one in the CI releases? I'm curious to try vlc but haven't been able to install that one yet with the new releases.

• 0

  Reputation Points

• 3 replies
• 3.1k views
• 2 followers

Efe Çetin

May 28, 20242 yr

playing around with armbian-config after switiching to vendor kernel - missing "toogle hardware configuration" Left is on (previous legacy vendor) kernel with "24.5.1 and right is legacy kernel with "24.2.1"" Just curious if anyone know why that is? Perhaps I should have taken other steps when switching to vendor kernel(I have rebooted and confirmed it is running vendor kernel prior to screenshot)

• 0

  Reputation Points

• 0 replies
• 1.7k views

igelkotten

May 27, 20242 yr

Can you help me with the contents of the file name? I understand edge, vendor, but then there are other suffixes that are not clear to me: are gnome-oibaf_desktop the same "kernel release" as the xfce_desktop or minimal? Or there are patches that are applied only to a specific version? Thanks!

• 0

  Reputation Points

• 4 replies
• 2.3k views

ricardo_brz

May 27, 20242 yr

I tested Armbian 24.5.1 Noble Gnome + trunk MESA/VPU Kernel: 6.6.31, Size: 1.3GB, Release date: May 25, 2024 on my PBP (sd card). What does not work: - Sound - HDMI Monitor on PB dock Thank you

• 0

  Reputation Points

• 0 replies
• 3.2k views

sepp

May 27, 20242 yr

Sorry, don't have the Armbianmonitor info handy but wanted to get this started... I'm trying to bring up a Libre Renegade RK3328-CC for use as a media center. Armbian's performance is absolutely wonderful compared to the other builds I've tried on this box. Unfortunately, I want the HDMI output going to a Samsung Frame TV, and resolution negotiation fails badly -- I get obvious rasters with black between them, nowhere near the 4K that this TV model is capable of and not even a smooth conversion (Note that the eyes here suggests that the black line is occurring every third raster or something like that...) What information I have gathered so far: …

• 0

  Reputation Points

• 7 replies
• 5.3k views
• 1 follower

Joseph Kesselman

May 27, 20242 yr

Hi everybody, I have a problem with this version: Armbian_20.05.2_Rockpro64_buster_legacy_4.4.213.img I don't see my disk that is plugged on the PCIe To SATA Marvell 88SE9230 in the system. I've create the file /etc/udev/rules.d/99-marvell.rules with the following line on it: ACTION=="add", SUBSYSTEM=="pci", ATTR{vendor}=="0x1b4b", ATTR{device}=="0x9230", RUN+="/bin/bash -c 'echo %k > /sys/bus/pci/drivers/ahci/bind'" If I do the same thing with this version: Armbian_20.05.4_Rockpro64_focal_current_5.4.46.img, I see my disk after creating the file. But, there's two problem with this version: first the fan always running and, m…

• 0

  Reputation Points

• 2 replies
• 4.6k views
• 1 follower

AndrewCo

May 26, 20242 yr

Hi there Suddenly HDMI output stopped working on my orange Py 5. I've been using the board with an external monitor for a month but on the next boot HDMI connection disappeared. external display using type-c output works fine; I've already tried several HDMI cables and monitors - no results; no visual damages detected on the board; flashing image doesn't help; The system is Armbian 24.2.1 jammy OS with GNOME version 42.9. Any ideas what next steps should I do to find out whats happen?

• 0

  Reputation Points

• 6 replies
• 6.8k views
• 1 follower

acdpsn

May 21, 20242 yr

Hi Referring to https://forum.armbian.com/topic/32667-usb-c-port-doesnt-work-on-pinebook-pro-after-the-latest-update-on-kernel-662/ USB -C is not working. I also tried 6.7.4-edge with no success. Looking for a solution G??gle found this: https://www.linuxquestions.org/questions/slackware-arm-108/pinebook-pro-usb-c-port-not-working-after-kernel-upgrade-4175732886/#google_vignette referring to Megi`s 6.7 kernel. The link was outdated, but the base worked and had versions 6.8 and 6.9. Tried both with a lot of success: USB-C working and the HDMI monitor output as well as Gigabit Ethernet work like a charm again. 😄 The only small issue remaining: Sound is not w…

• 0

  Reputation Points

• 0 replies
• 1.9k views

sepp

May 20, 20242 yr

Hello, sorry for my English. I have an Orange Pi 5 8gb and a 512gb nvme SSD. I would like to use it to install 2 operating systems (Android 12 + Batocera). This way, when starting the orange pi, it asks which operating system I want to start on. Is this possible?

• 0

  Reputation Points

• 3 replies
• 5.3k views

Michael Robinson

May 15, 20242 yr

Hello! Can anyone comment whether PCIE Passthrough is even theoretically possible on an Orange Pi 5+? Or should I just cease and desist? #1) The hardware seems to be there #2) IOMMU seems to be working at least for platform/PHP devices #3) VFIO looks to be on #4) no cigar The missing piece looks to be MMU600_PCIE support, as non-platform devices don't seem to be getting assigned iommu groups? --- #1 "There are two MMU600 instances in RK3588, MMU600_PCIE and MMU600_PHP respectively " https://github.com/FanX-Tek/rk3588-TRM-and-Datasheet/blob/master/Rockchip RK3588 TRM V1.0-Part1-20220309.pdf #2 root@oppa:~…

• 0

  Reputation Points

• 1 reply
• 7k views

chivi

May 14, 20242 yr

I've compiled mainline kernel 6.6 which runs well on my OrangePi/RK3399. The only problem left is getting H.264 decoding working. Unfortunately, when I query /dev/video1 which is the node created by the hantro-vpu driver, only MPEG2 and VP8 are shown as supported codecs for decoding. No H.264, even though I've read many places that the mainline hantro driver supports H.264. Has anyone else had this problem? Is there something else I need to do to get this working?

• 0

  Reputation Points

• 9 replies
• 6.8k views
• 1 follower

McTurbo

May 10, 20242 yr

I'm using a few Libre Computer Renegades as headless servers, and they're working well (thank you!), but I'm wanting to set one up for personal use, and I've discovered that when I plug headphones into the analog audio jack, the left and right channels are reversed. (Also, the default volume, (for example, from speaker-test in a terminal) is too loud for headphones.) sudo armbianmonitor -u Says: System diagnosis information will now be uploaded to https://paste.armbian.com/Error adding document. so I've attached armbian-hardware-monitor.log instead. armbian-hardware-monitor.log

• 0

  Reputation Points

• 0 replies
• 1.9k views
• 1 follower

Tim Makarios

May 10, 20242 yr

Version 20230401 with kernel 6.2 (pancsf-midstream). With HDMI USB support. https://disk.yandex.ru/d/W8pOOhizVjq91A To enable HW acceleration, install the mesa package with the forced overwrite option or an archive to enable acceleration for wayland. To enable wayland acceleration, you need to replace the files in the /usr/lib/aarch64-linux-gnu directory with the contents of the archive (with file replacement). After that, acceleration will work with wayland. X11 and wayland acceleration works the same way on Debian Sid (the images are the same as Ubuntu). After starting the system and initial configuration, replace the files from the archive…

• 0

  Reputation Points

• 26 replies
• 13.3k views

balbes150

May 8, 20242 yr

I've noticed that some system images will start the OrangePi with 4:2:2 output on HDMI instead of 4:4:4. This causes artifacts, especially when there's white text on a red background. What's the interface or method to change this? Does this have to be done via U-Boot or can it be done in userspace?

• 0

  Reputation Points

• 3 replies
• 2.7k views
• 1 follower

jock

May 2, 20242 yr

Hey everyone, I'm starting to lose my mind here. I've got an Orange Pi 5 which works great with a micro SD card. Now I got myself a nvme ssd and all I want to do is move my system from the sd card to the ssd. I've created an image of the sd card on my PC using "dd" and then wrote it on the ssd using dd again. It seemed to work fine, the only issue seems to be, that the UUID of the partitions on the ssd were the same as on the sd card, that's why I changed the UUID of the root partition on the ssd using "tune2fs -U random /dev/nvme0n1p2". I booted up the Pi with my sd card again and used armbian-config to flash mtdblock0 (boo…

• 0

  Reputation Points

• 10 replies
• 29k views

Markus Braun

May 1, 20242 yr

I have some problem starting Linux image with my OPi 5+. I just got an OPi 5+ 16Gb RAM no eMMC. I flashed official Android image into SD card with SDDiskTool following the instruction in wiki. It worked. Then I do the "Data Reset" in Android Settings. The board doesn't boot anymore. I re-flashed Android into the SD, and it worked again. Then, I want to try Linux. I flashed Joshua Riek ubuntu-22.04.3-preinstalled-desktop-arm64-orangepi-5-plus.img.xz into the same SD with balenaEtcher. It doesn't boot. I tried again with Armbian_24.2.1_Orangepi5_jammy_legacy_5.10.160_gnome-amazingfated_desktop.img.xz and official Ubuntu image as well. None of them ma…

• 0

  Reputation Points

• 2 replies
• 7.2k views

huuminhs

April 30, 20242 yr

Tinkerboard (not 2) not booting after kernel updates for some reason. Who knows how to fix this?

• 1

  Reputation Points

• 38 replies
• 15k views
• 4 followers

Ikesankom

April 26, 20242 yr

In March 2023 I bought an OPI5 and immediately went for armbian, but I had problems and reported it in the link in this POST. in 2024: I bought the SD cards and other power supply directly from the manufacturers to see if the OPI5 works. I downloaded and burned the latest stable version of Bookworm and the results were the same, errors and everything froze. Before throwing OPI5 in the trash, I downloaded "nightly builds (unstable)" and installed it on an nvme and... it works without problems, I've had no problems for 13 days. In conclusion, the SD card reader is damaged and I can only use the NVME. HELP: I ask you for help with the command (.…

• 1

  Reputation Points

• 7 replies
• 3.2k views
• 1 follower

SteeMan

April 26, 20242 yr

Orange Pi 5 plus. It seems that in the 'edge' kernels, ssh is disabled by default. Since HDMI doesn't function this is a problem. I used the debugging UART and after setup I got the message "ssh.service is disabled" I enabled the service and all is well. Any reason why ssh would be disabled?

• 0

  Reputation Points

• 7 replies
• 9.7k views
• 1 follower

Marco Schirrmeister

April 26, 20242 yr

Im running Armbian 24.2.1 jammy on odroidm1 with additional zfs volumes. On update, sometimes I had to reinstall the zfs kernel module, but now I have the problem, that the system does not recognize the kernel headers: sudo apt-get --reinstall install zfs-dkms Reading package lists... Done Building dependency tree... Done Reading state information... Done 0 upgraded, 0 newly installed, 1 reinstalled, 0 to remove and 0 not upgraded. Need to get 2,397 kB of archives. After this operation, 0 B of additional disk space will be used. Get:1 http://mirrors.dotsrc.org/armbian-apt jammy/jammy-utils arm64 zfs-dkms all 2.2.3-1 [2,397 kB] Fetched 2,397 kB in 1s …

• 1

  Reputation Points

• 3 replies
• 8k views

hi-ko

April 25, 20242 yr

I purchased the wifi + bt module. It is RTL8852BE. my armbian: Linux orangepi5-plus 5.10.160-legacy-rk35xx #1 SMP Fri Feb 2 07:51:33 UTC 2024 aarch64 aarch64 aarch64 GNU/Linux My Bluetooth never works. It cannot be listed under hciconfig: vnc@orangepi5-plus:~$ hciconfig -a vnc@orangepi5-plus:~$ rfkill ID TYPE DEVICE SOFT HARD 0 bluetooth bt_default blocked unblocked 1 wlan phy0 unblocked unblocked vnc@orangepi5-plus:/$ sudo cat /var/log/dmesg | grep "\(luetooth\|RFKILL\)" [sudo] password for vnc: [ 4.299662] kernel: Bluetooth: Core ver 2.22 [ 4.299678] kernel: Bluetooth: HCI device and connection …

• 0

  Reputation Points

• 1 reply
• 4.2k views

Werner

April 21, 20242 yr

Hey everyone. New to Armbian and Orange Pi, but no stranger to everything I ever try do do being a major hassle! So here's the deal. Installed Armbian jammy 5.1 for orange pi plus. Working nicely. Except some of you might remember me from earlier today when I was struggling to get my ax210ngw working correctly (thanks by the way. Fixed that)! So I follow the process to switch from SD card to my Samsung 980 pro 1tb nvme. Bit of confusion getting it to show as an option in armbian-install, but I got it. Formatted in ext4 with a partition via gparted--now every time I try to run the install script, no matter which option I choose, it either freezes or…

• 0

  Reputation Points

• 2 replies
• 2.6k views

Antimtr

April 17, 20242 yr

EDIT: I am using the Armbian 23.5.5 Orange Pi 5 Plus Jammy Legacy 5.10.160 Gnome Desktop image Let me preface this with I am a Linux noob and this is one step below black magic voodoo to me. For some reason my Orange Pi 5 Plus USB 3.0 ports are no longer functioning. I setup my OPi at my testing station and everything was working fine (except I couldn't get my WiFi dongle to work but that's a different post) After I turned off my Orange Pi 5 Plus, disconnected it and set it back up where it was going to be staged now the USB 3.0 ports no longer function. Putting in the "lsusb" command shows all my ports, including the non-f…

• 0

  Reputation Points

• 8 replies
• 14.8k views

maskimko

April 15, 20242 yr

Been trying to play 4k youtube videos with VLC and I haven't had any luck with vp09 and mp4 files. Is VP9 supported with 24.2.1 + kernel 5.10.160? I have no issues with hardware decoding of mp4/h264 in vlc but is vp9 hardware decoding possible? Browser seems to play youtube in 4k but not sure which codec it is using

• 0

  Reputation Points

• 0 replies
• 1.9k views
• 1 follower

OttawaHacker

April 14, 20242 yr

Good evening, last week they changed the electric meter in my building, but in order to do so they cut the power, and my Tinkerboard (the first model, the one issued back in 2017, Asus first's SBC), that I use as my "Save for later, and never look at it again" network folder, suffered. It continued to reboot from some kernel panic, which I forgot to take note; but since it hadn't been upgraded to jammy, I took the opportunity to do it. Pluging in the uSD card (with the newly released jammy version, just downloaded here), power, and all (including the ethernet cord!!), first boot I have to create my user (which, for some reasons refuses to let me put my usual fr3d tag…

• 0

  Reputation Points

• 20 replies
• 17.4k views
• 2 followers

fr3d

April 14, 20242 yr

Hi all, I'm using a UEFI based edge ubuntu 24.04 image which reported a kernel stack trace (system still seems functional and no ongoing issue/messages) - [ 22.382942] rcu: INFO: rcu_sched detected expedited stalls on CPUs/tasks: { 5-.... } 6 jiffies s: 381 root: 0x20/. [ 22.382966] rcu: blocking rcu_node structures (internal RCU debug): [ 22.382972] Sending NMI from CPU 7 to CPUs 5: [ 22.382983] NMI backtrace for cpu 5 [ 22.382995] CPU: 5 PID: 92 Comm: kworker/u16:2 Tainted: G W 6.8.5-edge-arm64 #2 [ 22.383004] Hardware name: Orange Pi Orange Pi 5 Plus/Orange Pi 5 Plus, BIOS v0.9.1 10/12/2023 [ 22.383009] Workqueue: writeb…

• 0

  Reputation Points

• 0 replies
• 1.5k views

ozacas

April 14, 20242 yr

Hello everyone, and Happy New Year. One question about Orange Pi 5 Plus: i have installed a wifi module (supported than what the official Orange documentation reports) AX210NGW in my Orange Pi 5 Plus main board with Operating System: Armbian 23.11.1 bookworm and Kernel: Linux 5.10.160-legacy-rk35xx. I copied in /lib/firmware the firmware of the module (https://intel.ly/3S0QZrA). if from the terminal I run: lspci I see the device but in "Armbian-config" in hardware section don't see the wifi module, and I can't activate the module to surf the Internet or the local network in wifi. The question is: am I forgetting any steps to setup the wifi module cor…

• 0

  Reputation Points

• 9 replies
• 10.6k views
• 1 follower

Antimtr

April 12, 20242 yr

I haven't tried Jammy with 6.1.43 but the kernel doesn't say rc anymore so curious of the status. How does this build compare in terms of feature and performance with 5.10? Is all the video decoding supported? The RK3588 Kernel support page says that hdmi audio is not supported - is that really the case? Is gnome/wayland supported? I see that only KDE is listed there.

• 0

  Reputation Points

• 1 reply
• 3.2k views
• 1 follower

Werner

April 12, 20242 yr

Hi all, reporting a regression in new Armbian 24.2.1 kernel version. New kernel is causing Orange Pi 4 LPS not to boot most of the time, when it boots, then there is no network. Kernel hangs with oops errors on the screen, and all debugging stuff. Sorry that I did not caught any of them on my phone, but it would have been incomplete anyway. How to reproduce: Install any 24.2.1 based system on Orange Pi 4 LTS Upon first boot, you will have issues. No Ethernet network. Second boot will most likely not succeed no matter what you do and system will brick permanently, by not booting at all (no video output), or booting and then showing kernel crash. …

• 0

  Reputation Points

• 5 replies
• 4.3k views
• 2 followers

jock

April 5, 20242 yr

Also the function keys don't seem to work either. Any fix?

• 0

  Reputation Points

• 0 replies
• 2k views

PineARMDude

April 4, 20242 yr

@SteeMan the thing is I have a RockPro64 and the only way to get DP alt-mode working on the USB-C port is on the 4.4 kernel which isn't supported by newer versions. Is there any backup repo for buster? Thanks

• 1

  Reputation Points

• 7 replies
• 4.2k views

lululombard

March 30, 20242 yr

I've found information on how to use your own IR remote controller from this site: https://forum.odroid.com/viewtopic.php?f=215&t=44671 In short: 1. Enable logging from the IR kernel module, enter in a terminal: sudo -i echo 1 > /sys/module/rockchip_pwm_remotectl/parameters/code_print dmesg -w 2. Check if your remote is supported by pressing the keys on your remote. It should give you info like: [ 3485.342354] USERCODE=0xfb04 [ 3485.369309] RMC_GETDATA=fd 3. Download the overlay file below and edit the usercode and the code for each key. So for like with the key above it'll be 0xfd 4. Place the header f…

• 0

  Reputation Points

• 0 replies
• 4.3k views
• 2 followers

royk

March 28, 20242 yr